Scribd
Upload
599 views1 page

Mid 128 Pid435

This document provides diagnostic information for a Volvo engine that is registering a fault code for relative effective torque. It describes two possible fault modes - too high torque and too low torque. For each fault mode, it lists the detection conditions, symptoms, possible causes, and recommends checking the fuel rail pressure as the action to take.

Uploaded by

Preett Rajin Menabung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
599 views1 page

Mid 128 Pid435

This document provides diagnostic information for a Volvo engine that is registering a fault code for relative effective torque. It describes two possible fault modes - too high torque and too low torque. For each fault mode, it lists the detection conditions, symptoms, possible causes, and recommends checking the fuel rail pressure as the action to take.

Uploaded by

Preett Rajin Menabung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Volvo Guided Diagnostics

Date: Information Type:


27-12-2011 Diagnostics Fault Codes 128: Engine ECU 435: Relative effective torque
Profile:
EXC, EC210B LC (Volvo) [GB] EXC, EC210B LC (Volvo) [GB] EXC, EC210B LC (Volvo) [GB] EXC, EC210B LC (Volvo) [GB]
EXC, EC210B LC (Volvo) [GB]

MID128 Engine ECU;PPID435 Relative effective torque(128 PPID435)


128 PPID435

Reference 230 Fuel system, description

Fault mode diagnosis

Fault mode Detection conditions:The engine control unit (E-ECU) registers: Too high torque
FMI 0 Symptom: Possible causes:

 Red central warning  Defective rail pressure sensor


 Buzzer sounds continuously  High pressure leakage on injector
 Error message screen
 Also sets MID 128 PSID 97 FMI 14
 Max. speed is limited to 1100 rpm
by the engine protection function
 Low power because of engine
protection
 Rail pressure limitation
 Engine shutdown

Action 237 Fuel rail pressure, checking

Fault mode Detection conditions:The engine control unit (E-ECU) registers: Too low torque
FMI 1 Symptom: Possible causes:

 Red central warning  Defective rail pressure sensor


 Buzzer sounds continuously  High pressure leakage
 Error message screen  Defective injectors
 Also sets MID 128 PSID 97 FMI 14  Pressure relif valve undetected
 Max. speed is limited to 1100 rpm opening
by the engine protection function
 Low power because of engine
protection
 Rail pressure limitation
 Engine shutdown

Action 237 Fuel rail pressure, checking

Guided Diagnostics

You might also like