Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    Fs 220

    Uploaded by

    PE Tru
    This circuit diagram shows an adjustable high voltage power supply that uses a NE555 oscillator circuit to drive a flyback transformer for high voltage generation. The power supply can output voltages from 1.5-60kHz and pulses from 10-100us using a 24V power source. Key components include the horizontal drive transformer T1, flyback transformer T2, MOSFET Q2, and spark gap for protection against high output voltages over 25kV.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fs 220

    Uploaded by

    PE Tru
    66 views1 page
    This circuit diagram shows an adjustable high voltage power supply that uses a NE555 oscillator circuit to drive a flyback transformer for high voltage generation. The power supply can output voltages from 1.5-60kHz and pulses from 10-100us using a 24V power source. Key components include the horizontal drive transformer T1, flyback transformer T2, MOSFET Q2, and spark gap for protection against high output voltages over 25kV.

    Original Description:

    sam,s

    Original Title

    fs220

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This circuit diagram shows an adjustable high voltage power supply that uses a NE555 oscillator circuit to drive a flyback transformer for high voltage generation. The power supply can output voltages from 1.5-60kHz and pulses from 10-100us using a 24V power source. Key components include the horizontal drive transformer T1, flyback transformer T2, MOSFET Q2, and spark gap for protection against high output voltages over 25kV.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    66 views1 page

    Fs 220

    Uploaded by

    PE Tru
    This circuit diagram shows an adjustable high voltage power supply that uses a NE555 oscillator circuit to drive a flyback transformer for high voltage generation. The power supply can output voltages from 1.5-60kHz and pulses from 10-100us using a 24V power source. Key components include the horizontal drive transformer T1, flyback transformer T2, MOSFET Q2, and spark gap for protection against high output voltages over 25kV.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    8 7 6 5 4 3 2 1

    High S1 S2
    VCC +24
    D VPP D
    Low D2 D3
    +12 VPP T2
    Power Select VCC HV+
    +5 Main Power
    C8 20T High SG1
    220uF #24 Voltage .5"
    C7 Winding
    680

    R10 HV-
    Flyback
    82
    2W

    R10 C8
    560 R1 R5 100uF 6V C9
    1K 1.5K Q2 .02uF
    T1 2SD797 D1
    C1
    C .01uF C

    D4 R4 R7 R11
    LED 1.2K 1K C5 R9 5.6 2W
    Power R2 R6 100uF 560
    100K 100K
    4 4
    Drive
    R R R8 4:1
    2 TR Q 3 2 TR Q 3 Q1
    2N3053
    7 7 150
    DIS DIS
    5 CV THR 6 5 CV THR 6
    R3
    680 Notes:
    U1 NE555 U2 NE555 C4
    C3 .0022uF 1. Horizontal drive transformer (T1) was from small B/W
    .01uF video monitor.
    B B
    C10 C2 2. Flyback transformer (T2) was from Mac-Plus computer
    .01 .01uF monitor. Original primary windings were removed.
    Oscillator Pulse Generator
    1.5-60 KHz 10-100 us
    3. Component values are not critical.
    4. Output may exceed 25,000 V at certain combinations of
    frequency and pulse width with 24 V power - could
    destroy The sparkgap provides some protection.
    5. Input power was current limited to about 5 A.
    6. Good heatsink important on Q2 for continuous operation.

    A
    HVGEN32 A
    Samuel M. Goldwasser
    Adjustable High Voltage Power Supply [email protected]
    Title
    Adjustable High Voltage Power Supply
    Size Document Number REV
    A HVGEN32-SCH 1.1
    Date: January 5, 1999 Sheet 1 of 1
    8 7 6 5 4 3 2 1

    You might also like