SOT26 (SC74R)

PACKAGE INFORMATION

Mechanical Data Package View

 Surface Mount Package
 Case Material: Molded Plastic, UL Flammability Classification
Rating 94V-0
 Terminals: Finish – Matte Tin Plated Leads, Solderable
per MIL-STD-202, Method 208 e3
 Weight: 0.016 grams (Approximate)
 Max Soldering Temperature +260°C for 30 secs as per JEDEC Top View
J-STD-020

Package Outline Dimensions

SOT26 (SC74R)
D

SOT26 (SC74R)
Dim Min Max Typ
A1 0.013 0.10 0.05
E1 E A2 1.00 1.30 1.10
A3 0.70 0.80 0.75
b 0.35 0.50 0.38
c 0.10 0.20 0.15
D 2.90 3.10 3.00
e - - 0.95
b
a1 e1 - - 1.90
e1 E 2.70 3.00 2.80
E1 1.50 1.70 1.60
L 0.35 0.55 0.40
a - - 8°
A2 a1 - - 7°
A3 A1
All Dimensions in mm
Seating Plane a
L
e c

Suggested Pad Layout

SOT26 (SC74R)

C1

Dimensions Value (in mm)

C 2.40
C1 0.95
Y1 G C G 1.60
X 0.55
Y 0.80
Y1 3.20
Y

Note: The suggested land pattern dimensions have been provided for reference only, as actual pad layouts may vary depending on application.
These dimensions may be modified based on user equipment capability or fabrication criteria. A more robust pattern may be desired for
wave soldering and is calculated by adding 0.2 mm to the ‘Z’ dimension. For further information, please reference document IPC-7351A,
Naming Convention for Standard SMT Land Patterns, and for International grid details, please see document IEC, Publication 97.

Note: For high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance
distances between device Terminals and PCB tracking.

SOT26 (SC74R) Package Information 1 of 6 March 2017

Rev. 2017-03-20 www.diodes.com © Diodes Incorporated
 SOT26 (SC74R)

Minimum Packing Quantity

Quantity Tape Width Part Number Suffix
7” Reel 3,000 8mm -7, TA
13” Reel 10,000 8mm -13, TC
Note: Package quantities given are for minimum packaging quantity only, not minimum order quantity. For minimum order quantity, please contact Sales
Department.
Note: No mixed date codes or partial quantity (less than minimum packaging quantity) per packaging is allowed.
Note: In no case shall there be two or more consecutive components missing from any reel for any reason.

Device Tape Orientation

Tape Width Part Number Suffix Tape Orientation

-7
-13
8mm
TA
TC

Direction of feed
Note: For part marking, refer to product datasheet.
Note: Tape and package drawings are not to scale and are shown for device tape orientation only.

SOT26 (SC74R) Package Information 2 of 6 March 2017

Rev. 2017-03-20 www.diodes.com © Diodes Incorporated
 SOT26 (SC74R)

Embossed Carrier Tape Specifications

Tape Width (W) Dimension Value (mm) Dimension Value (mm) Dimension Value (mm)

B1 4.5 max. F 3.5±0.05 P2 2.0±0.05

D 1.5+0.10 -0.0 K 2.4 max. t 0.40 max.
D1 0.35 min. P 4.0±0.10 W 8±0.30
8mm
E 1.75±0.10 P0 4.0±0.10
Determined by component size. The clearance between the component and the cavity must comply
A0 B0 K0 to the rotational and lateral movement requirement provided in figures in the "Maximum Component
Movement in Tape Pocket” section.

SOT26 (SC74R) Package Information 3 of 6 March 2017

Rev. 2017-03-20 www.diodes.com © Diodes Incorporated
 SOT26 (SC74R)

Embossed Carrier Tape Specifications (Continued)

SOT26 (SC74R) Package Information 4 of 6 March 2017

Rev. 2017-03-20 www.diodes.com © Diodes Incorporated
 SOT26 (SC74R)

Maximum Component Movement in Tape Pocket

SOT26 (SC74R) Package Information 5 of 6 March 2017

Rev. 2017-03-20 www.diodes.com © Diodes Incorporated
 SOT26 (SC74R)

Surface Mount Reel Specifications

A B Max C D Max N Min G T Max

Tape Width Reel Size
(mm) (mm) (mm) (mm) (mm) (mm) (mm)

7” 178 2 2.0 +0.5 -0 13 +0.5 -0.2 20.5 0.2 55 5 8.4 +1.5 -0.0 14.4
8mm
13” 330 2 2.0 +0.5 -0 13 +0.5 -0.2 20.5 0.2 100 2 8.4 +1.5 -0.0 14.4

Tape Leader and Trailer Specifications

Note: There shall be a leader of at least 230mm which may consist of carrier tape and/or cover tape or a start tape followed by at least 160mm of
empty carrier tape sealed with cover tape.

Note: There shall be a trailer of at least 160mm of empty carrier tape sealed with cover tape. The entire carrier tape must release from the reel
hub as the last portion of the tape unwinds from the reel without damage to the carrier tape and the remaining components in the cavities.

SOT26 (SC74R) Package Information 6 of 6 March 2017

Rev. 2017-03-20 www.diodes.com © Diodes Incorporated