Cloud Authentication Service Quick Setup Guide for RADIUS

Clients

This guide helps you quickly set up your production deployment for the Cloud Authentication Service and add
authentication for a RADIUS client.

Use this guide in conjunction with the Planning Guide. If you have completed a deployment with another Quick
Setup Guide and want to set up the deployment described in this guide, skip the steps that you have already
completed.

Step 1: Plan

There are a few things you need to plan to deploy your system.

What You Need to Have

Item Description
Sign-in credentials are emailed to you
after you request an environment from
RSA Sales or your partner.

Be sure that the email address that you

provide to RSA is for a real user in your
Sign-in credentials to the Cloud Administration Console LDAP directory and not, for example, a
group alias or general account.

For browser requirements for the Cloud

Administration Console, see
https://community.rsa.com/docs/DOC-
81615.
Hardware requirements for image file:

l Disk space: 54 GB
Virtual appliance infrastructure
l Memory: 8 GB
Required only for identity router deployment on-premises in a VMware
or Hyper-V environment l Virtual CPUs: 4

l Network interface:
l VMware: Two E1000
Item Description

virtual network adapters

or
l Microsoft Hyper-V: Two
synthetic network
adapters

Software requirements:

l VMware or
l VMware Platform:
VMware ESXi 5.5 or later
(currently 6.x series)
l VMware vSphere Client:
Any version that works
with the supported ESXi
deployments

l Hyper-V 2012 R2
Amazon Virtual Server Instance
hardware requirements:

l Family: General purpose

Amazon Web Services (AWS) account
l Type: t2.large
Required only for identity router deployment in an Amazon Web
l vCPUs: 2
Services cloud environment
l Memory: 8 GB
Note: To deploy an identity router in the Amazon cloud, you must be
familiar with the following concepts as they relate to AWS: AWS cloud environment requirements:

l Access to t2.large or better

Elastic Compute Cloud (EC2)
Amazon Machine Image (AMI) instance types
Elastic IP Address l Virtual Private Cloud with
Security Groups private and public subnets
Virtual Private Cloud (VPC)
l Route Tables, Security Groups,
Subnets
Route Tables and Network ACLs that allow
Network Access Control Lists (ACL) traffic between the identity
DHCP Option Sets router and all other components
Internet Gateway in your deployment
NAT Gateway
l DHCP Option Sets that specify
Virtual Private Gateway
all DNS servers required for
VPN Connection
VPC Peering your deployment
l Elastic IP addresses (if your
organization manages its own
DNS service)
Create a group of a limited number of
users (for example, RSA SecurID
Microsoft Active Directory 2008 or 2012 or LDAPv3 directory server
Access Test Group) to synch and test
with.
Used for an encrypted connection
(LDAPS) to your directory server.
SSL certificate from your LDAP directory server
Download the SSL certificate from your
directory server. If your directory

2
Item Description
server does not have a certificate,
install one.

For more information, see

https://community.rsa.com/docs/DOC-
89364.
l iOS 10.0 or later
l Android 5.0 or later
A mobile device or Windows PC
l Windows 10 Version 1511 or
later

What You Need to Know

RSA SecurID Access uses a hybrid architecture that consists of two components:

l The Cloud Authentication Service is a cloud service that provides an easy-to-use Cloud
Administration Console and powerful identity assurance engine.
l The identity router is a virtual appliance that securely connects your on-premises resources, such as
Active Directory, and the Cloud Authentication Service. You can deploy the identity router in your on-
premises VMware or Hyper-V environment, or in the Amazon Web Services (AWS) cloud.

In AWS deployments, the identity router has one network interface to which you assign public and
private IP addresses and connect other network resources from the internet or your private network.

In VMware and Hyper-V deployments, the identity router has two network interfaces. Place one interface
in a public-facing network and the other in a private network where it can reach your LDAP directory. For
more information about configuring your system to use these interfaces, see
https://community.rsa.com/docs/DOC-54091.

Add your values to the following worksheet. You will use this information in the next section and during setup.

Item Your Values

US region: auth.securid.com and access.securid.com,
na2.access.securid.com, or na3.access.securid.com
(191.237.22.167) and 104.42.197.125 (disaster
Cloud Administration Console and recovery environment) or

Cloud Authentication Service EMEA region: auth-eu.securid.com and access-

eu.securid.com (104.40.223.169) or

ANZ region: auth-anz.securid.com and access-

anz.securid.com (20.36.34.174)
LDAP directory server

l IP address
l FQDN
l Base DN of users (the root where users will be
synchronized from, for example,
DC=company, DC=com)
l Administrator account credentials that RSA
SecurID Access can use to connect to the
directory server
DNS servers IP addresses

For DNS configuration requirements, see

3
Item Your Values
https://community.rsa.com/docs/DOC-54152.
NTP server IP address
(Optional) RADIUS client IP address
Required only for VMware and Hyper-V identity router deployments:
Identity router management interface (private)

l IP address
l Netmask
l Gateway
l Short hostname
l FQDN
Identity router proxy interface (public)

l IP address
l Netmask
l Gateway
l Short hostname
l FQDN
Required only for Amazon Web Services identity router deployments:
Identity router

l Private IP Address
(Used for communication with internal
resources in the same VPC, another VPC, or
your on-premises network.)
l Public Elastic IP Address
(Used for communication with public
resources over the internet if the identity
router is in a public subnet. Not required if a
NAT/load balancer with a public IP address
manages traffic to the identity router.)
l Short hostname
l FQDN

Note: For identity routers in AWS, netmask and

gateway information is obtained automatically during
instance launch, according to the VPC subnet
settings.
AWS environment configuration details

l VPC
l Private subnet
l Public subnet
l DHCP options set
l Route tables
l Security groups
l Network ACLs

4
Connectivity Requirements
Replace the values in the table below with your values from the table above. This table identifies the connectivity
requirements that you might need to provide to your IT group to update firewall rules for your network. If you
deploy the identity router in the Amazon cloud, the route tables, security groups, and network ACLs in your AWS
environment must also allow these connections. Update your connectivity settings before continuing with the
next step.

Protocol
Source Destination Purpose
and Port
0.0.0.0/0 Cloud Authentication Service and disaster External user access to Cloud
TCP 443
recovery environment Authentication Service

For on-premises identity routers: On-

premises:
< Your
administrators> <Your identity router management TCP 443 Identity Router Setup Console
interface IP address>
Amazon:
For identity routers in the Amazon cloud:
<Your identity router private IP address> TCP 9786
For on-premises
Cloud Administration Console, Cloud
identity routers:
Authentication Service, and disaster
<Your identity recovery environment
router proxy
Note: If your company uses URL filtering,
interface IP
be sure that *.access.securid.com,
address> *.auth.securid.com, and the Cloud
TCP 443 Identity router registration
Authentication Service and disaster
For identity
recovery IP addresses for your region are
routers in the
whitelisted. Also, confirm that you can
Amazon cloud:
access the disaster recovery environment.
<Your identity For instructions, see
https://community.rsa.com/docs/DOC-
router private IP
79579.
address>
For on-premises
identity routers:

<Your identity
router
management
interface IP
address> LDAP directory user authentication and
<Your LDAP directory server IP address> TCP 636
authorization
For identity
routers in the
Amazon cloud:

<Your identity
router private IP
address>
For on-premises
identity routers:

<Your identity <Your DNS server IP address>

UDP 53 DNS
router proxy
interface IP
address or

5
 Protocol
Source Destination Purpose
and Port
identity router
management
interface IP
address>

For identity
routers in the
Amazon cloud:

<Your identity
router private IP
address>

<Your RADIUS For on-premises identity routers:

client IP <Your identity router management
address> interface IP address> UDP 1812 RADIUS
For identity routers in the Amazon cloud:

<Your identity router private IP address>

For on-premises
identity routers:

<Your identity
router proxy
interface IP
address or
identity router
management
interface IP <Your NTP server IP address> UDP 123 Network time server synchronization

address>

For identity
routers in the
Amazon cloud:

<Your identity
router private IP
address>

<Your For on-premises identity routers:

administrator (Optional) SSH for troubleshooting
<Your identity router management
computer> interface IP address> For more information, see
TCP 22
https://community.rsa.com/docs/DOC-
For identity routers in the Amazon cloud:
75833.
<Your identity router private IP address>

6
Step 2: Deploy the Identity Router

Add an Identity Router

Procedure
1. Sign into the Cloud Administration Console using the URL and credentials that RSA emailed to you.
2. Click Platform > Identity Routers.

3. On the Identity Routers page, click Add an Identity Router, and follow the instructions.

Under Registration Details, copy the Registration Code and Authentication Service Domain to a
location where you can access them later on.

4. Click Close.

Install or Create the Identity Router Virtual Appliance or Machine

You can install the virtual appliance image using a VMware administration client such as vSphere, by either
connecting to the VMware vCenter Server, or connecting directly to the VMware ESXi host.

Or you can use Hyper-V Manager or Amazon Web Services EC2 to create a virtual machine for the identity
router.

Procedure
1. In the Cloud Administration Console, click Platform > Identity Routers.
2. Click Download Identity Router Image and do one of the following:
l For VMware, click Download OVA Image for VMware, and save the image to a location
accessible by VMware.
l For Hyper-V, click Download VHD Image for Hyper-V, and save the image to a location
accessible by Hyper-V.
l For Amazon Web Services:
a. Click Access AMI Image for Amazon.
b. Enter your AWS Account ID.
c. Click Update AMI Access.
d. Note the values in the Identity Router AMI Name and AWS Regions with AMI
Access fields. You can search the AWS private images catalog using these value to
quickly locate the AMI.

3. Do one of the following:

7
l To use VMware, sign into the VMware client, do the following:

a. Follow the VMware client documentation to install the virtual appliance from the image.
When prompted, enter the following data:

l Name to use for the virtual appliance

l VMware host or cluster for the virtual appliance
l Resource pool for the virtual appliance
l Storage location or data store to use for the virtual appliance
l Format for storing virtual disks
l Networks to be used for the virtual appliance

b. Power on the virtual machine.

l To use Hyper-V Manager, sign into Hyper-V Manager, and do the following:

a. Click Hyper-V Host > New > Virtual Machine.

b. Follow the wizard. In each dialog box, provide the following information.

Dialog Box Required Information

Specify Name and Location Name of the identity router virtual machine.
Specify Generation Select Generation 1.
Assign Memory Startup memory = 8192 MB (recommended).
Configure Networking Select the network for the management network adaptor.
Select Use an existing virtual hard disk and browse
Connect Virtual Hard Disk to the location where the identity router VHD image is
available.
Completing the New Virtual
Review and click Finish.
Machine Wizard

c. To configure the second network, select the new virtual machine, right-click, and select
Settings .

d. On the Add Hardware page, select Network Adapter and click Add.

e. Select the network for your proxy interface, then click Apply and OK.

f. Select the new virtual machine from the list of virtual machines. Right-click and select
Start.

g. With the virtual machine selected, right-click again and select Connect.

l To use Amazon Web Services, sign into Amazon EC2 and follow the documentation provided by
Amazon to do the following:
a. Make sure your AWS environment includes a VPC which meets the following
requirements:
l Private and public subnets are configured according to your deployment
requirements.
l Route tables, security groups, and network ACLs are configured to allow
necessary traffic to and from the other network resources in your deployment,
such as users and identity sources.
l All DNS servers required for your deployment are specified in the DHCP options
set.

8
 b. Launch the virtual instance using the AMI.
When prompted, specify the following:
Setting Description
AMI template The AMI template image provided by RSA.
Determines presets for the virtual instance. The
Instance type identity router requires a t2.large instance or
greater.
The section of your Amazon environment where
Virtual Private Cloud (VPC)
you will deploy the identity router.
A subnetwork within your VPC where you will
deploy the identity router. The subnet can be
Subnet either public or private, depending on how
resources and users will connect to the identity
router.
Determines whether Amazon issues dynamic
public IP addresses for the identity router, or the
IP address is determined by the subnet settings. If
your organization manages its own DNS service,
Auto-assign Public IP
RSA recommends allocating a persistent Elastic IP
address through Amazon Web Services, and
assigning it to the identity router instance after
you complete the launch process.
Virtual storage space. The identity router requires
Storage
54 GB General Purpose SSD (GP2) storage.
Optional labels that describe this identity router.
RSA recommends adding a tag specifying the Fully
Tags Qualified Domain Name, which acts as a unique
identifier to differentiate this identity router from
others in your deployment.
Firewall rules that control traffic to and from the
identity router. Add security groups that allow
Security groups
necessary traffic from other network resources
according to your deployment model.
c. Review the configuration and launch the instance.
d. If prompted to select a key pair, select Proceed without a keypair.
e. Use the Get instance screenshot feature to monitor instance deployment status. When
deployment is complete, refresh the screenshot and write down the URL displayed for the
Identity Router Setup Console.

Configure Initial Network Settings Using the Identity Router VM Console

You use the Identity Router VM Console to configure IP addresses and static routes for on-premises identity
routers deployed in your VMware or Hyper-V environment.

Note: This procedure is not required for identity routers in the Amazon Web Services cloud.

Procedure
1. Connect to the identity router using your VMware or Hyper-V management client.
2. Sign into the Identity Router VM Console:

Username: idradmin

9
 Password: s1mp13

You are prompted to change these credentials the first time you sign in.

3. Refer to the planning worksheet for the values to complete the Management, Proxy, and DNS
sections.

Use the Up and Down arrows to navigate the main menu. Press Enter to select a menu option or
configure its settings. Use Tab and Shift + Tab to navigate between settings and back to the main menu.
When the cursor is in the settings panel, press F10 to save or Esc to revert. Press F10 after you
complete each section to save your values.

4. Select Commit in the left-hand frame to save the network configuration settings.

5. Write down the URL that appears.

Connect Identity Router to Cloud Administration Console

Procedure
1. Open a web browser and go to the URL that you wrote down in the previous section.

2. Sign into the Identity Router Setup Console:

Username: idradmin

Password: s1mp13

You are prompted to change these credentials the first time you sign in.

3. Add any DNS servers that you did not add in the Identity Router VM Console.

Note: These DNS server settings do not apply for identity routers in the Amazon cloud. Edit the DHCP
option set in your Amazon Web Services environment if you need to add DNS servers for an Amazon
cloud-based identity router.

4. Click Update IDR Setup Configuration.

5. Click Connect Administration Console.
6. In the Registration Code field, enter the Registration Code displayed when you added the identity
router in the Cloud Administration Console.
7. In the Authentication Service Domain field, enter the Authentication Service Domain displayed
when you added the identity router in the Cloud Administration Console.
8. Click Submit.

A confirmation message appears when the identity router is connected to the Cloud Administration
Console. Also, note that the Identity Router Setup Console contains other pages that provide network
diagnostics and detailed logs for the identity router.

10
 9. Sign into the Cloud Administration Console to check the status of the identity router (Platform >
Identity Routers).

When the identity router is connected to the Cloud Administration Console, the status reads Active. This
process usually takes up to five minutes.

10. In the Cloud Administration Console, click Publish Changes to apply the configuration settings for the
new identity router.

Step 3: Enable RADIUS on the Cluster

Procedure
1. In the Cloud Administration Console, click Platform > Clusters.
2. Select Edit from the drop-down menu next to the cluster.
3. Select the Enable the RADIUS service on all identity routers in the cluster checkbox.
4. Click Save and Finish.
5. Click Publish Changes.

Step 4: Connect LDAP Directory

Add a Connection to LDAP Directory

Procedure
1. In the Cloud Administration Console, click Users > Identity Sources.
2. Click Add an Identity Source > Select next to the directory to add.
3. Enter the identity source name and root (the base DN for users from the planning worksheet).
4. In the SSL Certificates section:
a. Select Use SSL encryption to connect to the directory servers.
b. Click Add and select the SSL certificate.

5. In the Directory Servers section, add each directory server in the identity source, and test the
connection.
6. Click Next Step.
7. On the User Attributes page, click Refresh Attributes, and verify that a valid list of attributes appears.

8. Select Use selected policy attributes with the Cloud Authentication Service.

11
 9. In the Policies column, select sAMAccountName, virtualGroups, and memberOf or other attributes
that you might use to identify users.

10. Click Next Step.

11. In the User Search Filter field, specify your test group using a filter. The following is an Active
Directory example:

(&(objectCategory=Person)(sAMAccountName=*)(objectClass=user)(mail=*)
(memberOf=<yourgroup_distinguishedName>))

Where <yourgroup_distinguishedName> is the name of your test administrator group.

For example, (&(objectCategory=Person)(sAMAccountName=*)(objectClass=user)(mail=*)

(memberOf=CN=SecurIDAccessUsers,OU=Groups,DC=Corp,DC=local))

12. Click Save and Finish.

13. Click Publish Changes.

Synchronize LDAP Directory for the Cloud Authentication Service

Synchronize data between the Cloud Authentication Service and your LDAP directory to ensure that the Cloud
Authentication Service reflects any updates made to the LDAP directory.

During synchronization, users are added and attribute values that you selected in the previous step are copied
to the Cloud Authentication Service. User passwords are not synchronized.

Procedure
1. In the Cloud Administration Console, click Users > Identity Sources.
2. Next to your identity source, select Synchronization from the drop-down menu.

3. In the Identity Source Details section, click Synchronize Now.

Depending on the number of users you are synching, this process can take a number of minutes.

Step 5: Add an Access Policy

Create an access policy that you will assign to RSA SecurID Access My Page (a web portal used for device
registration) when you configure it. For simplicity, this access policy will not require additional authentication of

12
users. You can change this policy in the future.

1. Sign in to the Cloud Administration Console.

2. Click Access > Policies.
3. Click Add a Policy.
4. Enter the name (for example, No Additional Authentication), and select the identity source.

5. On the Rule Sets page, do the following:

a. In Apply to, select All Users.

b. In the Access, specify Allowed.
c. In Additional Authentication, select Not Required.

6. Click Save and Finish.

7. Click Publish Changes.

Step 6: Enable My Page

RSA SecurID Access My Page is a web portal that helps provide a secure way for users to complete RSA SecurID
Authenticate device registration, using multifactor authentication and QR or numeric registration codes.

1. In the Cloud Administration Console, click Platform > My Page.

2. Enable My Page.

13
 3. Write down your My Page URL.

4. In the Primary Authentication Method drop-down list, select the authentication method to use.

5. In the Access Policy for Additional Authentication drop-down list, select the No Additional
Authentication policy that you created earlier.

6. Click Save.

Step 7: Protect a Resource

Configure a RADIUS client to be protected by RSA SecurID Access. In the wizard, select the preconfigured policy
All Users Low Assurance Level as the access policy.

For example, for instructions for configuring Cisco Adaptive Security Appliance, see this. For instructions for all
supported RADIUS clients, see the RSA SecurID Access category on RSA Ready.

Step 8: Test

Complete RSA SecurID Authenticate Device Registration

Procedure
1. On one device (for example, your computer), do the following:

a. Go to RSA SecurID Access My Page.

b. Enter your email address.

c. Enter your RSA SecurID passcode or password, depending on what you configured.

d. Complete any additional authentication that you are prompted for.

e. Click Get Started.

2. On another device ( iOS, Android, or Windows 10 ), download the RSA SecurID Authenticate app:

l iOS: Apple App Store

l Android: Google Play
l Windows 10: Microsoft Store

3. On your computer, on the Registration page, click Next.

4. On your mobile device, do the following:

a. Open the RSA SecurID Authenticate app.

b. Tap Allow to allow the Authenticate app to send notifications.

c. Allow or deny Google Analytics data collection. You can select either option to use the
Authenticate app.

d. Accept the license agreement.

e. Tap Scan QR Code.

14
 f. Allow the app to access your camera.

g. Scan the QR code that displays in My Page.

h. Tap OK after setup is complete.

i. Swipe through the tutorial.

j. The app home screen appears, and the app is ready for use.

5. On your computer, on the Registration page, click Test Now.

6. RSA SecurID Access sends a notification to your registered device.

7. On your mobile device, tap the notification and approve it.

8. The My Page home screen displays. You have successfully registered and tested your device.

Sign Into the Protected Resource

Procedure
1. Start the sign-in process to the protected resource.

RSA SecurID Access sends a notification to your phone.

2. Tap Approve on your mobile device.

3. Select Remember this browser, and click Continue.

You are signed into the resource.

15
Support and Service

You can access community and support information on RSA Link at https://community.rsa.com. RSA Link
contains a knowledgebase that answers common questions and provides solutions to known problems, product
documentation, community discussions, and case management.

RSA provides you with a unique identifier, called the Customer Support ID, which is required when you register
with RSA Customer Support. To see your Customer Support ID, sign in to the Cloud Administration Console and
click My Account > Company Settings.

Copyright © 1994-2018 Dell Inc or its subsidiaries. All Rights Reserved.

Trademarks
RSA, the RSA Logo, SecurID, and EMC are either registered trademarks or trademarks of Dell Inc throughout the
world. All other trademarks used herein are the property of their respective owners. For a list of RSA
trademarks, go to www.emc.com/legal/emc-corporation-trademarks.htm#rsa.

Intellectual Property Notice

This software contains the intellectual property of Dell Inc or is licensed to Dell Inc from third parties. Use of this
software and the intellectual property contained therein is expressly limited to the terms and conditions of the
License Agreement under which it is provided by or on behalf of Dell Inc.

Open Source License

This product may be distributed with open source code, licensed to you in accordance with the applicable open
source license. If you would like a copy of any such source code, Dell Inc. or its subsidiaries will provide a copy
of the source code that is required to be made available in accordance with the applicable open source license.
Dell Inc. or its subsidiaries may charge reasonable shipping and handling charges for such distribution. Please
direct requests in writing to Dell Legal, 176 South St., Hopkinton, MA 01748, ATTN: Open Source Program
Office.

16