Scribd
Upload
21 views

Slab: Slab No.5 (10.56) M - Panel No. 253: 1.1. Reinforcement

This document summarizes the reinforcement and geometry of Slab No. 5. It includes: 1) Details of the slab's reinforcement including bar diameters, cover, and grades of steel and concrete. 2) The slab's geometry including its thickness, contour, and support locations. 3) Results of the slab's calculations including maximum moments and forces, deflection, cracking, and reinforcement requirements and provisions. 4) Reinforcement detailing showing the locations and amounts of main and perpendicular reinforcement provided at the bottom and top of the slab.

Uploaded by

Ali Al-Basha
Copyright
© © All Rights Reserved
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
21 views

Slab: Slab No.5 (10.56) M - Panel No. 253: 1.1. Reinforcement

This document summarizes the reinforcement and geometry of Slab No. 5. It includes: 1) Details of the slab's reinforcement including bar diameters, cover, and grades of steel and concrete. 2) The slab's geometry including its thickness, contour, and support locations. 3) Results of the slab's calculations including maximum moments and forces, deflection, cracking, and reinforcement requirements and provisions. 4) Reinforcement detailing showing the locations and amounts of main and perpendicular reinforcement provided at the bottom and top of the slab.

Uploaded by

Ali Al-Basha
Copyright
© © All Rights Reserved
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 4

1. Slab: Slab No.5 (10.56)m - Panel no.

253
1.1. Reinforcement:

·0 Type : RC floor
·1 Main reinforcement direction : 0°
·2 Main reinforcement grade : B500C; Characteristic
strength = 500.00 MPa
Horizontal branch of the stress-strain diagram
·3 Ductility class :C
·4 Bar diameters bottom d1 = 1.2 (cm) d2 = 1.2 (cm)
top d1 = 1.2 (cm) d2 = 1.2 (cm)
·5 Cover bottom c1 = 3.0 (cm)
top c2 = 3.0 (cm)
·6 Cover deviations Cdev = 1.0(cm), Cdur = 0.0(cm)

1.2. Concrete

·7 Class : C30/37; Characteristic strength = 30.00


MPa
Rectangular stress distribution [3.1.7(3)]
·8 Density : 2501.36 (kG/m3)
·9 Concrete creep coefficient : 1.39
·10 Cement class :N

1.3. Hypothesis

·11 Calculations according


to : EN 1992-1-
1:2004/A1:2014
·12 Method of
reinforcement area calculations : analytical
·13 Allowable cracking
width
- upper layer : 0.40 (mm)
- lower layer : 0.40 (mm)
·14 Allowable deflection
: 3.0 (cm)
·15 Verification of punching
: yes
·16 Exposure
- upper layer : X0
- lower layer : X0
·17 Calculation type : simple
bending
·18 Structure class : S1

1.4. Slab geometry


Thickness 0.20 (m)
Contour:
edge beginning end length
x1 y1 x2 y2 (m)
1 0.03 -4.34 3.56 -4.34 3.53
2 3.56 -4.34 3.53 0.02 4.37
3 3.53 0.02 0.00 0.00 3.53
4 0.00 0.00 0.03 -4.34 4.34

Support:
n° Name dimensions coordinates edge
(m) x y
68 point 0.50 / 0.25 0.03 -4.34 —
68 linear 0.02 -2.17 —
68 linear 1.79 -4.33 —
0 linear 0.02 -2.17 —
69 linear 1.76 0.01 —
69 point 0.25 / 0.25 3.53 0.02 —
69 linear 3.54 -2.14 —
0 linear 3.54 -2.14 —
73 point 0.25 / 0.25 3.56 -4.31 —
0 linear 2.68 -4.33 —
74 point 0.25 / 0.25 0.00 0.00 —
* - head present

1.5. Calculation results:

1.5.1. Maximum moments + reinforcement for bending

Ax(+) Ax(-) Ay(+)


Ay(-)
Provided reinforcement (cm2/m):
6.70 6.70 6.70
6.70
Modified required reinforcement (cm2/m):
4.52 4.52 4.52
4.52
Original required reinforcement (cm2/m):
4.52 4.52 4.52
4.52
Coordinates (m):
2.68;-4.34 3.56;-4.34 2.68;-4.34
3.56;-4.34

1.5.2. Maximum moments + reinforcement for bending

Ax(+) Ax(-) Ay(+)


Ay(-)
Symbol: required area/provided area
Ax(+) (cm2/m) 4.52/6.70 4.52/6.70 4.52/6.70
4.52/6.70
Ax(-) (cm2/m) 4.52/6.70 4.52/6.70 4.52/6.70
4.52/6.70
Ay(+) (cm2/m) 4.52/6.70 4.52/6.70 4.52/6.70
4.52/6.70
Ay(-) (cm2/m) 4.52/6.70 4.52/6.70 4.52/6.70
4.52/6.70
SLS
Mxx (kN*m/m) 0.32 -1.29 0.32
-1.29
Myy (kN*m/m) 0.17 -0.65 0.17
-0.65
Mxy (kN*m/m) -2.39 -2.14 -2.39
-2.14

Nxx (kN/m) -6.33 -8.00 -6.33


-8.00
Nyy (kN/m) 0.00 -0.01 0.00
-0.01
Nxy (kN/m) -0.05 -0.23 -0.05
-0.23

ULS
Mxx (kN*m/m) 0.34 -1.35 0.34
-1.35
Myy (kN*m/m) 0.18 -0.68 0.18
-0.68
Mxy (kN*m/m) -3.10 -2.77 -3.10
-2.77

Nxx (kN/m) -8.43 -10.24 -8.43


-10.24
Nyy (kN/m) 0.00 -0.01 0.00
-0.01
Nxy (kN/m) -0.07 -0.29 -0.07
-0.29

Coordinates (m) 2.68;-4.34 3.56;-4.34 2.68;-4.34


3.56;-4.34
Coordinates* (m) 23.96;24.59;10.56 24.85;24.59;10.56 23.96;24.59;10.56
24.85;24.59;10.56
* - Coordinates in the structure global coordinate system

1.5.4. Deflection
|f(+)| = 0.0 (cm) <= fdop(+) = 3.0 (cm)
|f(-)| = 0.1 (cm) <= fdop(-) = 3.0 (cm)

1.5.5. Cracking
upper layer
ax = 0.00 (mm) <= adop = 0.40 (mm)
ay = 0.00 (mm) <= adop = 0.40 (mm)
lower layer
ax = 0.00 (mm) <= adop = 0.40 (mm)
ay = 0.00 (mm) <= adop = 0.40 (mm)

3. Results - detailing
List of solutions:
Reinforcement: bars
Solution no. Reinforcement range Total weight
Diameter / Weight (kG)
1 - 323.22

Results for the solution no. 1


Reinforcement zones
Bottom reinforcement
Name coordinates Provided reinforcement At
Ar
x1 y1 x2 y2 f (mm) / (cm)
(cm2/m) (cm2/m)
1/1- Ax Main 0.00 -4.34 3.56 0.02 16.0 / 30.0 4.52
< 6.70
1/2- Ay Perpendicular 0.00 -4.34 3.56 0.02 16.0 / 30.0 4.52
< 6.70

Top reinforcement
Name coordinates Provided reinforcement At
Ar
x1 y1 x2 y2 f (mm) / (cm)
(cm2/m) (cm2/m)
1/1+ Ax Main 0.00 -4.34 3.56 0.02 16.0 / 30.0 4.52
< 6.70
1/2+ Ay Perpendicular 0.00 -4.34 3.56 0.02 16.0 / 30.0 4.52
< 6.70

4. Material survey
·19 Concrete volume = 3.07
(m3)
·20 Formwork = 15.35 (m2)
·21 Slab circumference = 15.76
(m)
·22 Area of openings = 0.00
(m2)

·23 Steel B500C


·24 Total weight = 326.91 (kG)
·25 Density = 106.46 (kG/m3)
·26 Average diameter = 16.0
(mm)
·27 Survey according to diameters:

Diameter Length Number of identical elements:


(m)
16 3.47 30
16 4.28 10
16 4.29 10
16 4.30 4

You might also like