0% found this document useful (0 votes)
31 views2 pages

Autonomous Robot Using Raspberry Pi

The document describes a project to build a low-cost autonomous vehicle using a Raspberry Pi that can avoid accidents. It uses ultrasonic sensors in the front and back to detect obstacles at a distance, and IR sensors on the sides to detect obstacles and prevent the vehicle from falling off edges or hitting walls. The vehicle is automatically controlled based on input from the sensors to avoid detected obstacles. It is intended to help with navigation in foggy or rainy conditions when visibility is low.

Uploaded by

CRVinodKumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
31 views2 pages

Autonomous Robot Using Raspberry Pi

The document describes a project to build a low-cost autonomous vehicle using a Raspberry Pi that can avoid accidents. It uses ultrasonic sensors in the front and back to detect obstacles at a distance, and IR sensors on the sides to detect obstacles and prevent the vehicle from falling off edges or hitting walls. The vehicle is automatically controlled based on input from the sensors to avoid detected obstacles. It is intended to help with navigation in foggy or rainy conditions when visibility is low.

Uploaded by

CRVinodKumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

AUTONOMOUS ROBOT USING RASPBERRY PI

AIM:

The main aim of this project is to design a very low cost and effective autonomous
vehicle with accident alert system using IRs, Ultrasonic sensor and Raspberry pi

BLOCK DIAGRAM:

DESCRIPTION:

This paper proposes to build up an electronic gadget for Autonomous vehicle with
accent avoidance system so for that we are implementing the robot with two
ultrasonic sensors which are place at back and front in the vehicle this device is very
much helpful when the atmosphere in foggy and rainy condition for avoiding the
accidents and two IR sensors are placed on the right and left side of the vehicle to
alert the vehicle from falling from heights and hitting towards the walls using
raspberry pi

HARDWARE REQUIREMENTS:

 Raspberry pi
 IR sensors
 Ultrasonic sensors
 Buzzer
 Keys
 Motor driver

SOFTWARE REQUIREMENTS:

 Python
 Qt Creater

RESULT:
As we are using ultrasonic and IR sensor the accident can we avoided and
automatically controlled if obstacles are identified

You might also like