The documents provide information about various nickel alloys including their chemical composition, common forms, specifications and applications. Nickel 200, Alloy 400, Monel K500 and Alloys 600 and 625 are described as corrosion resistant alloys with various mechanical and chemical properties suitable for applications at different temperatures and environments.
The documents provide information about various nickel alloys including their chemical composition, common forms, specifications and applications. Nickel 200, Alloy 400, Monel K500 and Alloys 600 and 625 are described as corrosion resistant alloys with various mechanical and chemical properties suitable for applications at different temperatures and environments.
The documents provide information about various nickel alloys including their chemical composition, common forms, specifications and applications. Nickel 200, Alloy 400, Monel K500 and Alloys 600 and 625 are described as corrosion resistant alloys with various mechanical and chemical properties suitable for applications at different temperatures and environments.
The documents provide information about various nickel alloys including their chemical composition, common forms, specifications and applications. Nickel 200, Alloy 400, Monel K500 and Alloys 600 and 625 are described as corrosion resistant alloys with various mechanical and chemical properties suitable for applications at different temperatures and environments.
Nickel 200 is 99.6% pure nickel, one of the toughest metals. The Nickel 200's characteristics include excellent mechanical properties, a low gas content, low vapor- pressure, magnetic properties, high thermal and electrical conductivity. These properties and its chemical composition make Nickel 200 fabricatable and highly resistant to corrosive environment. Nickel 200 is useful in any environment below 600º F. It is highly resistant to corrosion by neutral and alkaline salt solutions. Nickel 200 also has low corrosion rates in neutral and distilled water.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Chemical Analysis of Nickel 200 (UNS N02200)
Nickel 200. Nickel 99.2
C MN P S Si Cr Ni Mo Cu Co Cb +Ta Fe other
.15 max .35 max .01 max .35 max 99.0 .25 max 0.40 max
Specifications
International Specifications Sheet/Plate Round Bar Pipe Tube Fittings Forgings
BS 3072, BS 3073, ASME ASME ASME ASME ASME ASME
BS 3074, BS 3075, SB-168 SB-160 SB-161 SB-161 SB-366 SB-564 BS 3076, NA11 ASME S ASME B-829 SB-163 DIN 17740, 17750, ASME ASME 17751, 17752, SB-775 SB-730 17753, 17754. ASME ASME SB-725 SB-751 Werkstoff Nr. 2.4060, 2.4066 ALLOY 400 _ UNS N04400 common trade names
Monel 400®, Nickelvac® 400, Nicorros® 400
Monel 400® is a nickel-copper alloy that is hardened by cold working only. Monel 400® has low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400® also has excellent resistance to stress corrosion cracking in most freshwaters. Monel 400® can be used in temperatures up to 1000 ºF. The alloy has great mechanical properties at subzero temperatures.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Chemical Analysis of ALLOY 400 (UNS N04400)
Monel 400®, Nickelvac® 400, Nicorros® 400
C MN P S Si Cr Ni Mo Cu Co Cb +Ta Fe oth er .3 max 2.0 max . 024 max .5 max 63.0 max 28-34 max 2.5 max
Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®. The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Chemical Analysis of Monel K500® (UNS N05500)
C MN P S Si Cr Ni M Cu Co Cb Al Fe Others o +Ta .25max 1.5 . 01 max .5 max 63.0 27-33 2.30- 2.0 max max min 3.15
Specifications Sheet/Plate Round Bar Pipe Tube Fittings Forgings QQ N 286 ASME SB-865 QQ N 286 AMS 4676 AMS 4676 QQ N 286 ALLOY 600 _ UNS N06600 common trade names
Inconel 600®, Nickelvac® 600, Ferrochronin® 600
Inconel 600® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work. Inconel 600® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Chemical Analysis of ALLOY 600 (UNS N06600)
common trade names
Inconel 600®, Nickelvac® 600, Ferrochronin® 600
C MN P S Si Cr Ni Mo Cu Co Cb+Ta Ti Al Fe Other Other
.15 1.0 .015 .5 14.0 - 72.0 .5 6.0 - max max max max 17.0 min max 10.0
Inconel ® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress- corrosion cracking resistance to chloride ions.
Typical applications for Alloy 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
C MN P S Si Cr Ni Mo Cu Co Cb+Ta Ti Al Fe Nb Other .50 .015 .015 .50 20.0 - 58.0 8.0 - 1.0 0.40 0.40 5.0 3.15 - .10 max max max max 23.0 min 10.0 max max max max 4.15
Specifications for Inconel 625 ® (UNS N06625)
Round International Specifications Sheet/Plate Pipe Tube Fittings Forgings Bar/Wire ASME SB-443 ASME SB-446 ASME SB- ASME SB- ASME SB- ASME SB- BS 3072, BS 3074, BS 3076, NA 21 AMS 5599 AMS 5666 444 444 366 564 DIN 17744, DIN 17750, DIN 17751, AMS 5869 AMS 5837 ASME SB- ASME SB- AMS 5666 DIN 17752, DIN 17754. 829 829 Werkstoff Nr. 2.4856 ASME SB- ASME SB- AFNOR NC 22 D Nb 775 751 ASME SB- ASME SB- 705 704 AMS 5581 ALLOY 800 _ UNS N08800 common trade names
Incoloy 800® is a nickel-chromium alloy with good strength and excellent resistance to oxidation and carburization. The alloy maintains stable structure during exposure to high temperature, therefore incoloy 800® has good corrosion resistance to many acidic environments.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Incoloy 825® is a nickel-iron- chromium alloy with titanium, copper, and molybdenum. Incoloy® 825's chemical composition provides great resistance to many corrosive environments, such as pitting, crevice corrosion, intergranular corrosion, and stress- corrosion cracking. Incoloy 825® has good mechanical properties from moderately to high temperatures. The hot- working range for Incoloy 825® is 1600 to 2150º F. The material has good weldability by all conventional processes.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Chemical Analysis of ALLOY 825 (UNS N08825)
common trade names
Incoloy 825®, Nickelvac® 825, Nicrofer® 4221
C MN P S Si Cr Ni Mo Cu Co Cb+Ta Ti Al Fe Other Other
.05 1.0 .03 .5 19.5 - 38.0 - 2.5 - 1.5 - 0.6 0.2 22.0 max max max max 23.5 46.0 3.5 3.0 1.2 max min
Hastelloy C22® provides resistance to general corrosion, pitting, crevice corrosion,
intergranular attack, and stress corrosion cracking. Inconel 22® can be used for many applications such as marine, power, chemical processing, pollution control, paper processing, and waste disposal industries. Hastelloy C22® contains chromium, molybdenum, tungsten, and iron which makes the alloy resistant to corrosion in stagnant or flowing seawater. The alloy is formed by gas tungsten-arc, gas metal-arc, and shielded metal-arc processes.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Chemical Analysis of Alloy C22 (UNS N06022)
common trade names
Hastelloy C22®, Inconel® 22, Nicrofer® 5621
C MN P S Si Cr Ni Mo Cu Co Cb+Ta Ti Al Fe W V .015 .50 .02 .02 .08 20.0 - 12.5 - 2.5 2.0 - 2.5 - .35 rem max max max max max 22.5 14.5 max 6.0 3.5 max
