Scribd Logo
Upload

Welcome to Scribd!

  • 67 views

    Table 1b. American National Standard Type A Plain Washers - Additional Selected Sizes ANSI/ASME B18.22.1-1965 (R2003)

    Uploaded by

    sathish1801
    The document details specifications for American National Standard Type A plain washers, including tolerance ranges for inside diameter, outside diameter, and thickness for various standard sizes of washers. It provides a table listing specifications for over 50 washer sizes and notes that washers are now ordered based on their dimensional specifications rather than series designations. The document also briefly describes Type B plain washers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Table 1b. American National Standard Type A Plain Washers - Additional Selected Sizes ANSI/ASME B18.22.1-1965 (R2003)

    Uploaded by

    sathish1801
    67 views1 page
    The document details specifications for American National Standard Type A plain washers, including tolerance ranges for inside diameter, outside diameter, and thickness for various standard sizes of washers. It provides a table listing specifications for over 50 washer sizes and notes that washers are now ordered based on their dimensional specifications rather than series designations. The document also briefly describes Type B plain washers.

    Original Description:

    washer

    Original Title

    Washer

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document details specifications for American National Standard Type A plain washers, including tolerance ranges for inside diameter, outside diameter, and thickness for various standard sizes of washers. It provides a table listing specifications for over 50 washer sizes and notes that washers are now ordered based on their dimensional specifications rather than series designations. The document also briefly describes Type B plain washers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    67 views1 page

    Table 1b. American National Standard Type A Plain Washers - Additional Selected Sizes ANSI/ASME B18.22.1-1965 (R2003)

    Uploaded by

    sathish1801
    The document details specifications for American National Standard Type A plain washers, including tolerance ranges for inside diameter, outside diameter, and thickness for various standard sizes of washers. It provides a table listing specifications for over 50 washer sizes and notes that washers are now ordered based on their dimensional specifications rather than series designations. The document also briefly describes Type B plain washers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Machinery's Handbook 28th Edition

    1470 WASHERS

    Table 1b. American National Standard Type A Plain Washers —


    Additional Selected Sizes ANSI/ASME B18.22.1-1965 (R2003)
    Inside Diameter Outside Diameter Thickness
    Tolerance Tolerance
    Basic Plus Minus Basic Plus Minus Basic Max. Min.
    0.094 0.000 0.005 0.219 0.000 0.005 0.020 0.025 0.016
    0.125 0.000 0.005 0.250 0.000 0.005 0.022 0.028 0.017
    0.156 0.008 0.005 0.312 0.008 0.005 0.035 0.048 0.027
    0.172 0.008 0.005 0.406 0.015 0.005 0.049 0.065 0.036
    0.188 0.008 0.005 0.375 0.015 0.005 0.049 0.065 0.036
    0.203 0.008 0.005 0.469 0.015 0.005 0.049 0.065 0.036
    0.219 0.008 0.005 0.438 0.015 0.005 0.049 0.065 0.036
    0.234 0.008 0.005 0.531 0.015 0.005 0.049 0.065 0.036
    0.250 0.015 0.005 0.500 0.015 0.005 0.049 0.065 0.036
    0.266 0.015 0.005 0.625 0.015 0.005 0.049 0.065 0.036
    0.312 0.015 0.005 0.875 0.015 0.007 0.065 0.080 0.051
    0.375 0.015 0.005 0.734a 0.015 0.007 0.065 0.080 0.051
    0.375 0.015 0.005 1.125 0.015 0.007 0.065 0.080 0.051
    0.438 0.015 0.005 0.875 0.030 0.007 0.083 0.104 0.064
    0.438 0.015 0.005 1.375 0.030 0.007 0.083 0.104 0.064
    0.500 0.015 0.005 1.125 0.030 0.007 0.083 0.104 0.064
    0.500 0.015 0.005 1.625 0.030 0.007 0.083 0.104 0.064
    0.562 0.015 0.005 1.250 0.030 0.007 0.109 0.132 0.086
    0.562 0.015 0.005 1.875 0.030 0.007 0.109 0.132 0.086
    0.625 0.015 0.005 1.375 0.030 0.007 0.109 0.132 0.086
    0.625 0.015 0.005 2.125 0.030 0.007 0.134 0.160 0.108
    0.688 0.030 0.007 1.469a 0.030 0.007 0.134 0.160 0.108
    0.688 0.030 0.007 2.375 0.030 0.007 0.165 0.192 0.136
    0.812 0.030 0.007 1.750 0.030 0.007 0.148 0.177 0.122
    0.812 0.030 0.007 2.875 0.030 0.007 0.165 0.192 0.136
    0.938 0.030 0.007 2.000 0.030 0.007 0.165 0.192 0.136
    0.938 0.030 0.007 3.375 0.045 0.010 0.180 0.213 0.153
    1.062 0.030 0.007 2.250 0.030 0.007 0.165 0.192 0.136
    1.062 0.045 0.010 3.875 0.045 0.010 0.238 0.280 0.210
    1.250 0.030 0.007 2.500 0.030 0.007 0.165 0.192 0.136
    1.375 0.030 0.007 2.750 0.030 0.007 0.165 0.192 0.136
    1.500 0.045 0.010 3.000 0.045 0.010 0.180 0.213 0.153
    1.625 0.045 0.010 3.250 0.045 0.010 0.180 0.213 0.153
    1.688 0.045 0.010 3.500 0.045 0.010 0.180 0.213 0.153
    1.812 0.045 0.010 3.750 0.045 0.010 0.180 0.213 0.153
    1.938 0.045 0.010 4.000 0.045 0.010 0.180 0.213 0.153
    2.062 0.045 0.010 4.250 0.045 0.010 0.180 0.213 0.153
    a The 0.734-inch and 1.469-inch outside diameters avoid washers which could be used in coin oper-
    ated devices.
    All dimensions are in inches.
    The above sizes are to be ordered by ID, OD, and thickness dimensions.
    Preferred Sizes of Type A Plain Washers are shown in Table 1a.
    ANSI Standard Plain Washers.—The Type A plain washers were originally developed
    in a light, medium, heavy and extra heavy series. These series have been discontinued and
    the washers are now designated by their nominal dimensions.
    The Type B plain washers are available in a narrow, regular and wide series with propor-
    tions designed to distribute the load over larger areas of lower strength materials.
    Plain washers are made of ferrous or non-ferrous metal, plastic or other material as spec-
    ified. The tolerances indicated in the tables are intended for metal washers only.

    Copyright 2008, Industrial Press Inc., New York, NY - www.industrialpress.com

    You might also like