6.

Which components should be swapped to the new Storage Processors during a Data-
in-Place conversion?
A. I/O modules and DIMMs
B. DIMMs and M.2 device
C. CNA SFPs and M.2 device
D. CNA SFPs and I/O modules

7.Which task must be performed on the storage system in order to access a file
system read/write snapshot?
A. Perform the snapshot "Attach to Host" operation
B. Connect to the NFS/SMB share of the snapshot
C. Configure Host Access to the LUN snapshot
D. Configure the NFS/SMB share to the file system snapshot

8.What is the maximum number of Thin Clones and snapshots per Base LUN that can be
created?
A. 8
B. 16
C. 64
D. 256

9.What is the default data relocation setting on newly created LUNs?

A. Highest Available Tier
B. Start High then Auto-Tier
C. Auto-Tier
D. Lowest Tier

10.What is a benefit of using ESI?

A. Increases bandwidth
B. Reduces configuration time
C. Minimizes downtime risk
D. Improves security

11.A storage team is tasked with using SANCopy and File Import to migrate from a
VNX to a Dell EMC Unity system. How does this Unity feature handle deduplicated
data?
A. Dell EMC Unity Data Reduction is not supported for migrations using SANCopy or
File import.
B. If Data reduction is enabled on the Dell EMC Unity target, the VNX data being
migrated is deduplicated and compressed as it is written to the target pool.
C. When the VNX source has deduplication enabled, SANCopy and File Import will by
default deduplicate data written to the target.
D. If Data reduction is enabled on the Dell EMC Unity target, deduplicated data
from the VNX source is written directly to the target Dell EMC Unity pool.

12.What are characteristics of the LUN Snapshot Copy operation?

A. Parent cannot be a Snapshot copy
Able to copy only a detached Snapshot
Has an independent Retention Policy from the parent
B. Parent cannot be a Snapshot copy
Able to copy an attached or detached Snapshot
Inherits the parent Snapshot Retention Policy
C. Parent can be a Snapshot copy
Able to copy an attached or detached Snapshot
Inherits the parent Snapshot Retention Policy
D. Parent can be a Snapshot copy
Able to copy only a detached Snapshot
Has an independent Retention Policy from the parent

13.What are the minimum and maximum recovery point objectives (RPOs) configurable
when using Dell EMC Unity native asynchronous replication?
A. Minimum = 1 min
Maximum = 1440 min
B. Minimum = 5 min
Maximum = 1440 min
C. Minimum = 5 min
Maximum = 60 min
D. Minimum = 1 min
Maximum = 60 min

14.A storage administrator needs to configure remote logging. Which file do they
need to edit?
A. syslog-ng.conf file on the remote computer
B. syslog-rg.conf file on the remote computer
C. syslog-ng.conf file on the Dell EMC Unity system
D. syslog-rg.conf file on the Dell EMC Unity system

15.A storage administrator needs to monitor system efficiency metrics to report to

management on the effectiveness of the Dell EMC Unity Data Reduction feature.

How often are the data reduction system efficiency metrics updated within
Unisphere?

Every 5 min
Every 10 min
Every 30 min
Every 60 min

16A storage administrator has a DR solution that synchronously replicates a LUN

from a Site A production Dell EMC Unity system to a destination Dell EMC Unity at
Site B. Site A experiences an unexpected outage.

What operations would be performed to provide data access during the outage window
and return production to Site A after the outage?

A. Failover from Site B after the outage event

Resume from Site A after Site A is recovered
Failback from Site B to return production to Site A
B.Failover from Site B after the outage event
Resume from Site A after Site A is recovered
Failback from Site A to return production to Site A
C.Failover from Site B after the outage event
Resume from Site B after Site A is recovered
Failback from Site A to return production to Site A
D.Failover from Site B after the outage event
Resume from Site B after Site A is recovered
Failback from Site B to return production to Site A

17.Which two replication operations are only available to asynchronous replication

sessions?
A. Failover with Sync, Failback
B. Failover with Sync, Sync
C. Failover, Resume
D .Failback, Resume

18.Where in Unisphere can a storage administrator find information about the drive
count capabilities for the system?

A. Online Help files for Pools

B. Dashboard System Capacity widget
C. System Limits page
D. Pools Properties page

19.A storage administrator is tasked with converting a LUN from thin to thick. They
will utilize the native Local LUN Move feature.
What should the admin consider before moving the LUN?

A. Local LUN Move tool can move a LUN between different pools or within the same
pool of a system
B. Local LUN Move operation will cause a major performance impact on data access
C. Local LUN Move tool requires data reduction to be disabled during the move
D. Local LUN Move tool cannot move a LUN within the same pool; admin will need to
create another pool for the target of the move

20.What is used to manage virus-checking on a NAS Server?

A. CAVA Agent
B. Unisphere Manager
C. CIFS Management snap-in
D. Common Event Enabler

21.What is a characteristic of the iSCSI interface on Dell EMC Unity storage

arrays?
A. Only one iSCSI interface can exist on a physical network port.
B. IQNs are associated with an iSCSI interface.
C. IQN aliases are automatically generated when the iSCSI interface is created.
D. An iSCSI interface can be created with both an IPv4 and IPv6 IP address.

22.Which storage pool object is created for every Private LUN in a traditional
pool?
A. MetaLUN
B. Array Slice
C. RAID Stripe
D. Stripe Volume

23.A NAS Server has multiple IP interfaces configured. The preferred production
interface has become inactive.
How does the NAS Server attempt to perform network communication?

A. Backup interface, if available, will be used for production.

B. NAS Server is offline until the preferred production interface is restored.
C. Backup interface, even if available, will not be used for production.
D. NAS Server fails over to the alternate Storage Processor.

24.Which ports are required to be open for Outbound Only Integrated ESRS
configuration?
A. 443 and 8443
B. 9443 and 8443
C. 443 and 9443
D. 80 and 443

25.You are creating a dynamic pool using eight drives in the Unisphere GUI. Which
RAID stripe width will be set when creating the dynamic pool using RAID 1/0?
A. 1+1
B. 2+2
C. 3+3
D. 4+4

26.What capability is available only in UEMCLI or REST API for traditional pools on
a Dell EMC Unity All-Flash storage array?
A. Creating
B. Expanding
C. Viewing
D. Managing

27.What is a feature of the Dell EMC Unity UFS64 Enterprise File System
architecture?
A. Supports up to a maximum of 64 VMDK clones
B. Scales up to a maximum of 64 TB usable capacity
C. Supports up to a maximum of 64,000 sub-directories per directory
D. Provides space reclamation of unused blocks

28.Which Dell EMC Unity system configuration can be performed using the Unisphere
Initial Configuration wizard?
A. Configure Link Agregation
B. Register host iSCSI initiators
C. Register host HBA WWNs
D. Add iSCSI network interfaces

29.A storage administrator is moving a NAS Server to the peer SP. What is a
consideration for the operation?

A. Transparent to NFS clients; disruptive to SMB 3 clients with CA

B. Transparent to SMB 2 clients; may be disruptive to NFS clients
C. Transparent to NFS clients; disruptive to SMB 2 clients
D. Transparent to SMB 3 clients with CA; may be disruptive to NFS clients

30.A system administrator is configuring asynchronous remote replication for an

existing NAS Server and its associated file systems on a Dell EMC Unity system.
What action(s) need to be taken?

A. Manually create replications for each associated file system.

Then manually create a session for the NAS Server.
B. Manually create NAS Server replication session.
The system will automatically create sessions for the associated file systems.
C. Manually create replication sessions for each file system.
The system will automatically create a session for the NAS Server.
D. Manually create NAS Server replication session.
Then manually create replication sessions on each of the associated file systems.

31. Which host will automatically register on a Dell EMC Unity array?
A. AIX
B. Linux
C. ESXi
D. Microsoft Windows

32.What is the correct sequence of steps to create a synchronous replication

session?

A. Configure replication settings for the session

B. Create replication connection on source or destination
C. Verify / update peer replication communications
D. Create interfaces using management ports on source and destination

33.A storage administrator has configured a Host I/O Burst Limit Policy with the
following parameters:
Absolute Limit = 1000 IOPS
Burst = 20% for 5 minutes every 1 hour
How many extra IOs will be allowed, per one-hour period, for this policy?
A. 600
B. 1,200
C. 6,000
D. 60,000

34.How far in advance of license expiration does Dell EMC UnityVSA issue the first
license expiration alert?

7 days
14 days
1 month
2 months

35.Which FAST VP tiering policy optimizes pool performance?

Highest Available Tier

Auto-Tier
Lowest Available Tier
Start High then Auto-Tier

36.What can be used to configure a static management IPv4 address on a Dell EMC
Unity array?

Initial Configuration Wizard

Unity Connection Utility
DHCP
Unisphere Configuration Wizard

37.What is a Dell EMC best practice to achieve maximum iSCSI throughput on a Dell
EMC Unity array?

iSCSI interface configured to use EAP

iSCSI interface and host on a shared network
iSCSI interface configured to use CHAP
iSCSI interface and host on a private network

38.A user encounters communication interruptions between Unisphere and a Dell EMC
Unity storage system. What is the first recommended action to resolve this issue?

A. Locate Storage System tasks

Select Reinitialize
B. Locate Storage Processor tasks
Select Reboot for primary Storage Processor
C. Locate Storage System tasks
Select Restart Management Software
D. Locate Storage Processor tasks
Select Reimage for primary Storage Processor
39.Which provisioning configuration is unique to an NFS datastore?
A. Host IO Size
B. Tiering Policy
C. NAS Server
D. Minimum Allocation Size

40.What is a consideration when creating a Thin Clone?

Source snapshot must be read-write

Source snapshot must be read-only
Thin Clone can be configured as a replication destination
No limitations to creating a Thin Clone of a Thin Clone

41.A company needs to expand their dynamic pool by 3 TB. The current dynamic pool
consists of sixty-three 1.9 TB SSD drives that are configured for RAID5 8+1.
What is the minimum number of drives needed for the pool expansion?

1
3
10
11

42.What types of advanced static routes can be created for NAS Server interfaces?

Net and local

Host and local
Host and net
Local and non-local

43.What happens when the soft limit of a file system quota is reached?

Grace period is invoked

Error message is sent to storage administrator
Error message is sent to client
User requests are denied

44.Which VVol object stores VMDKs, snapshots, clones, and fast-clones?

Data
Swap
Memory
Config

45.What is the order of operations for a Consistency Group Snapshot?

The Snapshot captures a write-order consistent image of the group of LUNs.

The system completes any outstanding I/O to the group of LUNs.
All writes to the LUN are suspended until the snap operation completes.
Consistency Group Snapshot is taken.

46.Which Dell EMC Unity storage resources and models support the Host I/O Limits
feature?

Block and file storage resources from all models

File storage resources from All-Flash array models
Block storage resources from physical models only
Block storage resources from all models

47.What functionality is provided to Dell EMC Unity from its integration with CTA?
Synchronous disaster recovery solution for Dell EMC Unity file storage
Data migration solution for VNX block storage to Dell EMC Unity
DHSM data mobility to cloud destination on Virtustream
Dell EMC Unity configured as a destination for tiered DHSM data

48.What is a characteristic of Automatic UFS64 File System extension?

File system cannot auto-extend past the provisioned size

Allocated space does not change after the extend operation
Auto-extension can exceed the file system visible size
Array I/O service to clients is disrupted during auto-extension

49.A storage administrator managing a Dell EMC UnityVSA system licensed for 25 TB
capacity notices alerts related to license expiration. What is a valid explanation
for these alerts?

A. UnityVSA license is based on capacity.

Expiration alert messages begin once capacity reaches the 95% threshold limit.
B. UnityVSA license is based on capacity.
Expiration alert messages begin once capacity reaches the 75% threshold limit.
C. UnityVSA license expires after 18 months.
Expiration alert messages begin one month before the license expiration date.
D. UnityVSA license expires after 12 months.
Expiration alert messages begin one month before the license expiration date.

50.Which hypervisor is supported for Dell EMC UnityVSA deployment?

Microsoft HyperV
VMware ESXi
Citrix XenServer
Oracle VM

51.You are creating a host configuration for NFS clients. Which parameter is
optional?

Tenants
Host name
Network address
Profile type

52.What is the default FAST VP tiering policy?

Highest Available Tier

Start High then Auto-Tier
Lowest Available Tier
Auto-Tier

53.A storage administrator wants to utilize VVols on an existing Dell EMC Unity
array. What needs to be done to configure VVols using an existing storage pool?

Enabling capability profile on an existing storage pool is unsupported

Create new storage pool and enable capability profile
Enable capability profile on the VVol
Enable capability profile on storage pool

54. When the LUN Snapshot Restore operation is performed, what does the Dell EMC
Unity system automatically do before beginning the restoration process?
Detaches the host from the Snapshot
Detaches the host from the LUN
Creates a Snapshot of the LUN
Creates a copy of the Snapshot

55. A Dell EMC Unity Storage Processor fails to come online after reboot. How can a
storage administrator use their laptop to monitor the boot sequence?

Connect to Dell EMC Unity service port, and use the ipmi tool
Connect to Dell EMC Unity IDRAC port, and use the web console
Connect to Dell EMC Unity USB port, and use the service console
Connect to Dell EMC Unity serial port, and use puTTY

56. For which platforms is FAST Cache available?

All Dell EMC Unity Hybrid systems

All physical Dell EMC Unity systems only
All physical and virtual Dell EMC Unity systems
All X50 model Dell EMC Unity systems

57. A Dell EMC Unity system is configured with 20 x 16 Gb/s FC active ports at
installation. By default, which ports are configured to support synchronous
replication?

A. SPA FC Port 4
SPB FC Port 4
B. SPA IO Module 1 FC port 0
SPB IO Module 1 FC port 0
C. SPA IO Module 0 FC port 0
SPB IO Module 0 FC port 0
D. SPA FC Port 5
SPB FC Port 5

58. What are the possible error states of an M.2 SSD?

Disconnected and Degraded only

Faulted and Degraded only
Faulted and Disconnected only
Disconnected, Degraded, and Faulted

59. Dell EMC Unity arrays can be monitored by which centralized management tools?

Severity Level: System

Alert:

Significant impact on system A. Notice

User should be aware of B. Warning
Minor impact to system C. Critical
No action required D. Error

60. What is a rule for configuring host to storage connectivity for block access?

When connecting a host to different Dell EMC Unity storage arrays, different access
protocols must be used.
When connecting a host to any single Dell EMC Unity storage array, hosts with CNAs
must use both FC and iSCSI access protocols.
When connecting a host to any single Dell EMC Unity storage array, only one access
protocol must be used.
When connecting a host to different Dell EMC Unity storage arrays, a single fabric
must be used for connectivity.