Mould-On Polyurethane Wheels: S Covering S 7heel Centre Body S (UB

RE.
F5
Mould-on polyurethane wheels
s¬ Covering
Mould-on polyurethane, hardness 95 Shore A.
s¬ 7HEEL¬CENTRE¬BODY
Die-cast aluminium.
s¬ (UB
Hub with ball bearings. Ideal solution for heavy loads and continuous
moving.
Applications
Excellent rolling resistance and elasticity, high wear and tearing resistance.
See Technical Data on page 56 for selection parameters.
Environmental conditions
RE.F5 wheel is suitable for use in environments with the presence of
atmospheric agents, alcohols and glycols; use in environments with the
presence of organic and mineral acids, basic solutions and saturated
vapour is not recommended.
Rolling resistance - force / load applied
The diagram shows the force to be applied to a wheel to keep it moving at
the constant speed of 4 km/h, according to the applied load.
The intersection point with a 50N value is the maximum transportable load
with a manually actuated 4-wheel trolley; in fact, 200N = 50N x 4 wheels
is the maximum force that may be supported by the operator according to
the regulations in force regarding work safety.
Mechanical moving with towing devices
For mechanical towing, please see the technical specifications to
determine the capacity variation.
Temperature
If operating temperatures in an application differ from the standard
range of values, please see the technical specifications to determine the
capacity variation.
RE.F5 wheels are also supplied with bracket:

- RE.F5-N (see page 10): wheels with steel sheet bracket.
- RE.F5-H (see page 12): wheel with steel sheet bracket to be used for
medium-heavy loads.
Elesa Standards Main dimensions Static load # Rolling resistance # Dynamic carrying capacity #
Castors and wheels
Code Description D d l3 l4 l5 d3 [N] [N] [N] g

451501 RE.F5-080-RSL 80 12 25 30 8 28 2800 1500 2200 200
451506 RE.F5-100-RSL 100 12 30 40 10 32 3500 2250 2500 340
451511 RE.F5-125-RSL 125 12 35 40 10 32 5000 2800 4000 500
451516 RE.F5-150-RSL 150 20 40 50 14 47 8500 3300 6000 910
451521 RE.F5-200-RSL 200 25 50 55 15 52 10000 3600 8500 1450
# See Technical Data on page 51 for static load, rolling resistance and dynamic carrying capacity. 9
Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings.
2%& .
Mould-on polyurethane wheels
with steel sheet bracket
s¬ Covering
Mould-on polyurethane, hardness 95 Shore A.
s¬ 7HEEL¬CENTRE¬BODY
Die-cast aluminium.
s¬ (UB¬AND¬AXLE¬SET
Hub with ball bearings. The axle set is mounted using a calibrated tube
processed to obtain an even surface where ball bearings and spacers
are inserted. Screw and nut are tightened to lock the spacer and the ball
bearings. Ideal solution for heavy loads and continuous moving.
s¬ 3TANDARD¬EXECUTIONS
¬ 03, .: brakeless wheel with zinc-plated steel ﬁxed plate bracket.
¬ 33, .: brakeless wheel with zinc-plated steel turning plate bracket.
¬ 33& .: wheel with zinc-plated steel turning plate bracket, with brake.
¬ &3, .: brakeless wheel with zinc-plated steel turning plate bracket and
centre pass-through hole.
¬ &3& .: wheel with zinc-plated steel turning plate bracket and centre
pass-through hole, with brake.
s¬ &IXED¬PLATE¬BRACKET
Zinc-plated steel sheet, the bracket is designed to withstand loads up
to 3000N.
s¬ 4URNING¬PLATE¬BRACKET
Zinc-plated steel sheet, the bracket is designed to withstand loads
up to 3000N. The presence of two ball turns and the direct contact
between the plate and the ball race ring with built-in pin ensure excellent
manoeuvrability and very limited clearance (see fig. 1). Does not require
maintenance.
It consists of:
1) fitting plate: electrolytically zinc-plated steel sheet;
2) fork: electrolytically zinc-plated steel sheet;
3) ball race ring: electrolytically zinc-plated steel sheet;
4) central pin: incorporated in the plate, cold reflanged;
5) rotation system: dual grease-lubricated ring of balls;
6) dust seal: RAL 7015 dark grey technopolymer.
s¬ &RONT ACTUATED¬BRAKE
Total brake that locks the wheel and bracket rotation. The optimised
dimensions and the retractable pedal ensure minimal space occupied
and maximum actuation ease. Hardened carbon steel spring.
The trolley must be turned to use the device. The brake is simple and
effective to use: it is actuated and released by a simple action from
the top downward at the tip of two separate pedals, thus ensuring the
utmost manoeuvring comfort. The braking efficacy may be adjusted with
a socket head screw M8.
Applications
Excellent rolling resistance and elasticity, high wear and tearing resistance.
For further information see RE.F5 (see page 9) wheel.
Castors and wheels
10
Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings.

Mould-On Polyurethane Wheels: S Covering S 7heel Centre Body S (UB

Uploaded by

Copyright:

Available Formats

Mould-On Polyurethane Wheels: S Covering S 7heel Centre Body S (UB

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mould-On Polyurethane Wheels: S Covering S 7heel Centre Body S (UB

Uploaded by

Copyright:

Available Formats

RE.

RE.F5 wheels are also supplied with bracket:

Code Description D d l3 l4 l5 d3 [N] [N] [N] g

You might also like