AFT Impulse 7 Data Sheet

TM
Dynamic solutions for a fluid world

AFT Impulse 7 ™
Waterhammer & Surge Analysis Software
Design and Operate Your System

with Greater Safety and Reliability
AFT Impulse is a powerful fluid dynamic simulation
tool used to calculate pressure transients in piping
systems caused by waterhammer. Designed for use in
liquid systems containing water, petroleum and refined
products, chemical products, cryogens, refrigerants, and
more, AFT Impulse is an essential tool with the ability to
tackle your most demanding systems.
Capabilities Benefits Applications

•• Easily change system input data to experiment with
operating conditions and scenarios •• Understand the transient •• Ensure pressure
response of your system extremes are within
•• Model a wide range of system components for both design design allowables
and operational cases •• Avoid damaging effects
of waterhammer and •• Size and locate surge
•• Initiate transients based on time or events in the system other undesirable system suppression equipment
•• Reduce surge magnitudes by slowing system component transients •• Determine imbalanced
changes such as valve closures or pump speed •• Alleviate issues associated pipe forces for sizing
•• Calculate transient unbalanced forces and define force sets with inadequate system structural supports
as location pairs or single points designs or operational •• Troubleshoot existing
procedures systems to determine
•• Specify alerts that automatically highlight output values
that are out of range for flow, pressure or velocity •• Validate the design of the cause of operational
safety features problems
•• Prevent issues with transient pressures by determining
proper size and location for surge equipment, such as •• Visualize the dynamic •• Evaluate the effect of
surge tanks, gas accumulators, and relief valves interaction of valves, pressure surges due to
pumps and other vapor cavity collapse
•• Utilize the output data to summarize the codes and
components
standards used within the models
•• Compile catalogs of your frequently used piping
components and select them from a drop down list
Add-On Modules
Settling Slurry Pulsation Frequency Analysis
The only commercial software solution that Helps identify and avoid resonant
can model both non-settling and settling frequencies in systems, especially in those
slurry waterhammer effects. caused by positive displacement pumps.
2955 Professional Place, Suite 301 · Colorado Springs, CO 80904, USA · (719) 686-1000 · [email protected] · www.aft.com
Features
•• Built-in steady-state solver to automatically initialize
waterhammer transient
•• Robust integration with Microsoft Excel for importing
and exporting of data
•• Compound transient event logic to model complex
control sequences
•• Detailed pump inertial modeling for trips and startups
using one quadrant or four quadrant methods
•• Extensive cavitation modeling including liquid column
separation
•• Scenario Manager to track all design variants and
operational possibilities in a single model file
•• Comprehensive modeling of relief valves, surge tanks,
and gas accumulators
•• Integrated graphing and reporting
•• Animation tools for visual interpretation of complex
transient interactions
•• Generates force imbalance files that can be
automatically read into CAESAR II ®, ROHR2, and
TRIFLEX ® pipe stress dynamic models
•• Built-in libraries of fluids (including NIST REFPROP and
ASME Steam Tables) and fittings which can be extended
and customized
Data Integration
•• Import piping layouts and dimensional data from
GIS shapefiles, EPANET, CAESAR II neutral files, How does it work?
as well as PCF files from AutoCAD Plant 3D, AFT Impulse incorporates a steady-state solver providing
SmartPlant, PDS, CADWorx, and others seamless transfer of initial conditions to the transient
analysis. Steady-state solutions are determined using
•• Robust import/export Excel integration
Newton-Raphson matrix iteration. The traditional
“AFT Impulse”, “Applied Flow Technology”, “Dynamic solutions for a fluid world”
Method of Characteristics is used to solve the transient
and the AFT logo are trademarks of Applied Flow Technology Corporation. CAESAR
II, ROHR2, AutoCAD Plant 3D, SmartPlant, PDS, and CADWorx are third-party mass and momentum equations of pipe flow.
products owned and trademarked by their individual corporations.
World Class Support

Your software includes one free year of product upgrades and technical support.
Additionally, AFT offers a variety of training for all levels of knowledge.
Training Seminars Free Webinars Expert Assistance Tips & Tricks

This classroom style Hosted webinars talk Have more projects than Each month, an
setting accelerates your about products and you can handle or need AFT engineer gives
skills and teaches you solutions-based uses. expert analysis? Extend newsletter readers a
how to be an AFT analysis Recorded webinars are your team with our Flow new tip and trick to
and simulation expert. located on our website. Expert Package. keep you up to date.
2955 Professional Place, Suite 301 · Colorado Springs, CO 80904, USA · (719) 686-1000 · [email protected] · www.aft.com

AFT Impulse 7 Data Sheet

Uploaded by

Copyright:

Available Formats

AFT Impulse 7 Data Sheet

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AFT Impulse 7 Data Sheet

Uploaded by

Copyright:

Available Formats

TM

Dynamic solutions for a fluid world

Waterhammer & Surge Analysis Software

Design and Operate Your System

Capabilities Benefits Applications

Settling Slurry Pulsation Frequency Analysis

World Class Support

Training Seminars Free Webinars Expert Assistance Tips & Tricks

You might also like