Ga 1064

Download as pdf or txt
Download as pdf or txt
You are on page 1of 31
At a glance
Powered by AI
The document provides detailed technical specifications for a drilling rig, its components and ancillary equipment. Key specifications include power output, maximum loads, pump capacities, derrick height and other dimensions.

The rig is a ZJ80D model with 1200 HP engines providing 6000 HP total power. It has a maximum hook load of 585 tonnes and can drill to a depth of 8000m. The derrick height is 45.8m and the rig floor is 10m high.

There are 3 mud pumps with a maximum pressure of 5000 PSI and displacement of 27 bbl/min. The mud system includes pulsation dampeners and relief valves. Two 1000 bbl mud tanks are available.

Rodson Universal Inc

www.rodson.com
[email protected]

Ref ga1064

Drilling rig ZJ85 D

Model ZJ80D
Drive system SCR
Derrick max. rating load (API Std 4D) 585tones
Max. working hook load, 10 lines 585tones
Available depth with 5” DP 8000m
Installed power 1200 x 4 6000 HP
No. of engines installed 4
No. of engines standby 0
No. of drilling line for hoisting system 12
Max. pull of single 38 tons
Dia. of drilling line 1-1/2 in
No. of speed for drawworks and rotary table 4 + 1 rev.
Opening of rotary table 49 1/2
Max. length of stand pipe 33 m
Working pressure of pneumatic
10 kg/cm2
system
Rig floor height 10 m
Mud tank capacity 2000 bbls
Max. mud pump pressure 5000 PSI
Max. mud pump displacement rate 27 bbl/mnt
Derrick clear height (between rig floor and crown block) 45.8m
Generator equipped (300KW x 3) 900 KW
Skidable rig on pad Not Skidable
Top Drive system Electric Driven System
Maximum rated drilling depth using 5” DP 8000m
Date of last full inspection NA
Rodson Universal Inc
www.rodson.com
[email protected]

RIG AND ANCILLARY EQUIPMENT

DRAWWORKS

Type JC80D
Drive Diesel electric driven with SCR
Rated Input HP (Continuous) 3000HP
Crown Block Protection Yes
Power Available To Drawworks 3000HP
Maximum Line Pull 38 ton
Auxiliary Brake Electric Magnetic Eddy Current Brake
Model DS-80
Colling System Water
Drilling Line size and spec 1-5/8''
Crown Block Safety Device Make (Auto Stop) Baoji Petrolum Mechinery Plant
Model YCY-A

Power Units

Diesel Engine A.C. Generator System 5


Diesel Engine/Generator sets 1200 HP
Continuous power of each set 6000 HP
Diesel Engine 5
Diesel Engine quantity CATERPILLER, CAT 3512BTA
Make Type Provided
Diesel Engine mufflers w.spark arrestor, Fin Tube Coolers, Extra Heavy duty cooling fot desert operation.
A.C. electric generators 5 unit

A.C. electric generators quantity KATO / SR4B or SIEMENS


Make type
A.C.Generator maximum power 600 V
A.C.Generator output voltage 50 Hz
S.C.R. Conversion System Siemens
Make type 4 unit
Number of generators can be connected in parallel on SCR 4 + 1 FOR 3th PUMP
S.C.R. motor drivers quantity 7
Number of D.C. motors the S.C.R. system can run
simultaneously 600V-1900kA X 4 +1
Rodson Universal Inc
www.rodson.com
[email protected]

Electrical Transformers 1 unit


Electrical transformers quantity Dry / GUANGDONG
Electric tranformers make-type 400 V
E. transformer output voltage 1250 KVA
E.transformer output power 50 Hz
E.transformer frequency
Emergency Diesel Engine VOLVO/TAD1232GE
Diesel Engine make-type 300KW
Diesel Engine continuous power Provided
Diesel Engine mufflers w.spark arrestor, Fin Tube Coolers, Extra Heavy duty cooling fot desert operation
Emergency A.C.Generator VOLVO/TAD1232GE
Emergency A.C.Generator make-type 320 KVA
A.C.Generator max.continuous power 400 v
A.C.Generator output voltage 50 Hz
A.C.Generator frequency Provided
Emergency Generator automatic start in case of main circuit
Provided
failure
Emergency Generator with its own Control Panel Provided
Emergency lighting on rig floor Provided
Emergency lighting around diesel Engine plant Provided
Emerg.lighting ( red ligths ) on top of mast Provided
Emergency lighting on other working area Provided
Electric recharging pump for BOP accumulator Unit Provided
Radio Communication system in company Office Provided
Electrical air compressor Unit Provided
Rodson Universal Inc
www.rodson.com
[email protected]

MUD SYSTEM

HIGH PRESSURE MUD SYSTEM


Mud Pumps
Total installed 3unit
M. P.No.1 M. P.No.2 M.P.No.3

Make BAOJI BAOJI BAOJI


F 1600 F 1600 Triplex F 1600 Triplex
Type
Triplex
Max rated input power 1600 HP 1600 HP 1600 HP

Pulsation Dumpener make BAOJI BAOJI BAOJI


Ball type 1- Ball type 1- Ball type 1-257150
Pulsation Dumpener type
257150 .257150
Reset Relief Valve make Baoji Baoji Baoji

Reset Relief Valve type JA-3 JA-3 JA-3

Size of Liners available 6.1/2” – 6” - 5.1/2” – 5”

Mud Pump Motors (Explosion Proof)


Quantity 2 2 2

Motor make Yongji Yongji Yongji

Motor Type YZ08/YZ08A YZ08/YZ08A YZ08/YZ08A

Motor rated Continuous Power 1088 HP 1088 HP 1088HP

Pump Motor Lock Out Provided Provided Provided

Mud Pump Surcharging pump


Make and type Sichuan SB-6”x8” Sichuan SB-6”x8” Sichuan SB-6"x8"
Impeller Diameter 10 in 10 in 10in

Packing Seal Type Mechanical Mechanical Mechanical

Driven by motor power 75 HP 75 HP 75 HP

Rotating speed 1480 RPM 1480 RPM 1480 RPM

Mud pump suction Lines One each

Quantity 2 set

Suction line O.D. 10 in

Mud pump suction Dampeners


Quantity One each

make and type Baoji China


Rodson Universal Inc
www.rodson.com
[email protected]

Mud pump suction Filters


Quantity One each
make and type Baoji China
Mud pump discharge line filters
Quantity One each

type Baoji China

Mud pump Discharge Lines flexible section


Rated working Pressure 5.000 PSI

Built as per API specification API 7K grade D

Mud pump Discharge Lines rigid section


manifolded with the
Quantity
mud pumps.
Rated working Pressure 5.000 PSI

Built as per API specification Provided

Rig Floor Mud Manifold


All connected with
All connection ends welded or flanged
union
Mud manifold valves quantity 5+8

Mud manifold valves make-type Jaungsu China

Valves size and work. pressure 4” - 5.000 PSI

Bleed off Valve size 2” - 5.000 PSI

Bleed off Valve type Jaungsu China

Connection Provision for Mud logging Unit pressure Sensor Provided

Exclusion valve size 2” - 5.000 PSI

Connection Provision for MWD Sensor Provided

Exclusion valve size 2” - 5.000 PSI

Casing Fill-Up valve size 2” - 5.000 PSI

Casing Fill-Up valve type Remote Plug Valve

Stand pip Rigid Section Flexible Section


Stand Pip 2 2
Inside Dia 4 3.1/2”
Rated wor 10,000 PSI 10,000 PSI
Built as pe API 7K grade D API 7K grade D
Rodson Universal Inc
www.rodson.com
[email protected]

Hoses
Quantity 2
Inside Diamter and length 3.1/2” x 75 ft
Rated working Pressure 10,000 PSI
Built as per API specification API 7K grade D

MAST AND SUBSTRUCTURE


Derrick
Model JJ585/45
Height 157 ft x 25 ft
Width Of Base 30 ft x 10 ft
Width Of Top 6.9 ft x 8.2 ft
Load Capacity with 12 lines 585ton
Number Of Lines 12
Ladders-Climbing Device-Rest Platform Fitted
Counter Balance, System For Rig Fitted
Racking Platform
Type DZ5000 / 7.5-XD1
Racking Platform Capacity Of 5"DP 16,400 ft
Racking Platform Capacity Of 5"Dp HWDP 820 ft
Racking Platform Capacity Of 6-1/2" DC 720 ft
Racking Platform Capacity Of 8" DC 820 ft
Belly Belt Rail Con 2 Eyes Lines Comply
Escape Line Friction Brake Escape Fitted
Racking Arm Fitted
Type 5,500 lbs
Casing Stabbing Board
Type TFT100
Adjustable Form/To Height 20 ft
Certified With Mast Yes
Substructure
Type DZ585/9
Height 9m
Width 36 ft x 35 ft
Rodson Universal Inc
www.rodson.com
[email protected]

Setback Capacity 2880 KN


Casing Capacity 5850 KN
Drip Pan Below Set Back Area Fitted
Nipple Of With Hose Into Separation Tank 4 In.
Clear Height Below R/Table Beams 25 ft
Top Drive Installation Capability Yes

Full substructure-width mats placed crosswise to ground beam direction and extending at least two
(2) feet outside ground beams.

TRAVELLING BLOCK
Type YC-585
Rated Capacity 585ton
No Of Sheaves No 7
Sheave Diameter 50 inch
Sheave Grooved For Line Size 1- 5/8 inch

HOOK
Type DG585
Rated Capacity 585ton
Link 132” Length 132” X 500 ton
Link 192” Length 192” x 500 ton

SWIVEL
Type SL585-5
Rated Capacity 585
Test/Working Pressure 5000 PSI
C/W Gooseneck & Washpipe, Minimum Id 101.6 4"
Pin Connection Spec 6-5/8 " Reg LH

Top Of Gooseneck 4 - 8 In. (Api Std 513)


Note: Links have the capability to utilize a duplex cement plug dropping head combined with a TDS
installation
Rodson Universal Inc
www.rodson.com
[email protected]

DRILL PIPE ELEVAT


Size 5” 4”
Elevators
Quantity 1 1
Manufacturer : Baoji PMP Baoji PMP
CDK 131 X
Type : CDK -131 X 134
102
Rating : 600ton 600ton
Slips
Quantity 1 1
Manufacture Rudong Rudong
Model SDXL SDXS
Rating : 600ton 600ton

DRILL COLLAR ELEVATORS AND SLIP


Size 9 1/2” 8 1/4” 6 1/4” 4 3/4” 2 7/8”
Elevators
Quantity 1 1 1 1 1
Baoji
Manufacturer : Baoji PMP Baoji PMP Baoji PMP Baoji PMP
PMP
Type : CDK CDK CDK CDK CDK
200
Rating : 200 tons 200 tons 150 tons 100 tons
tons
Slips
Quantity 1 1 1 1 1
Manufacture Rudong Rudong Rudong Rudong Rudong
Model WT WT WT WT WT
Rating : 200 ton 200 ton 200 ton 200 ton 200 tons

KELLY AND KELLY SPINNER


Kellys
Nominal Size OD 6” 3-1/2"
Quantity 2 2
Shape Type Hexagonal Hexagonal
Total/Working Length 46 ft / 40 ft 46 ft / 40 ft
Connection 4-1/2" IF 3-1/2" IF
Rodson Universal Inc
www.rodson.com
[email protected]

API Classification API Spec 7 Api Spec 7


Kelly Saver Subs
Size Of OD x ID 6-5/8" X 2 ¼” 4 ½” x 2 ¼”
Quantity 2 Set 2 set
4-1/2" IF Box X 4-1/2" IF
Connection 3 ½” IF Box X 3 ½” IF Box
Pin
API Classification API Spec 7 API Spec 7
Kelly Spinner
JIANSU RUDONG
Manufacturer :
PETROLEUM MACHINERY PL
Type Pneumatic with Reverse
Rating 500 tons

Rotary Table
Lanzhou Petroleum National
Make
Oil Well
Type ZP495
Minimum Opening 39,5
Driven By Kelly Bushings Yes
Max Rotary Speed 300 RPM
Maximum Continuous Torque 36285Nm

12. Spinning Wrench


JIANSU RUDONG OIL
Manufacturer :
MACHINERY PLANT
Hydraulic
Type :
Q250
Rated Torque : 72330 ft.lbs
For Pipe Size 3 ½” – 10”
Quantity 2
Rodson Universal Inc
www.rodson.com
[email protected]

Mud Mixing Unit

Mixing system is manifolded to allow mixing of more than one material and in more than one tank with two
(2) independent mixing hoppers

Quantity 2 unit
Location On The No.6 Tank
Make Changqing
Model XL-4A
Feed Pump Make Changging
Model 6 x 8 SB-IV
Motor at 1200RPM 100HP
Shearing Device Type 6 x 5 JOB-45 x120
Make Changqing
Quantity 1

Mud Tanks
Quantity 9 set
Total Capacity 469 M3 (2950 bbls)
Total Capacity Active System 319 M3 (2000 bbls)
Dimensions M 10.5 X 2.8 X 2.5
Description/Capacity No 1 - Trap Active Tank 334 bbls
Description/Capacity No.2 - Treat Active Tank 250 bbls
Description/Capacity No.3 - Storage Active Tank 377 bbls
Description/Capacity No.4 - Storage Active Tank 377 bbls
Description/Capacity No.5 - Suction Active Tank 285 bbls
Description/Capacity No.6 – Heavy Weight Mixing Tank 377 bbls
Description/Capacity No 7 Pill Tank 100 bbls
Description/Capacity No.8 Water Tank 377 bbls
Description/Capacity No.9 Water Tank 377 bbls

Mud tanks are isolated from water tanks and water lines, and piped to allow suction from any compartment
and discharge to any other compartment. All water lines shall have their valves, piping and outlets outside
of mud tanks and to be clearly visible. A SAUDI ARAMCO approved (Reference: SAUDI ARAMCO
General Instructions 7.029 & 7.030) Super Sack handling system including overhead beams (rails), power
traveling hoist and cradle will be installed over mud hoppers, and Super Sack lifting rings will be provided.
An independent 6”X 8” 100 HP transfer pumps will be provided transfer Mud to the Mud Pit.
Rodson Universal Inc
www.rodson.com
[email protected]

Mud Mixers
Quantity 9 unit
Model NJ 15
Driven By Motor Of Kw 15 KW

Trip Tanks
Quantity 2
Make Changging
Capacity 2 x 60 bbls
C/W float activated electric recording device located at driller's console calibrated in barrels.

Flowline Cleaners
Quantity 3
Make Van Changqing
Type GW-S 1. Linear Motion Flo-Line Cleaner
Driven By No Of Explosion Proof Electric 2x2
Combined Max Flow Rate 1600 GPM
Pyramid Screen 60, 80, 100, 125, 150, 180 On Request base on price list
A positive shut off butterfly valve (minimum 10" ID) on Possum Belly to bypass shakers installed

Desander
Quantity 1
Make Xi'an Changqing
Quantity Of Cones 2
Type/Size Centrifugal Pump 6'x 8'SB-IV
Driven By Explosion Proof Electric Motor 100HP
Max Flow Rate 1600 GPM
Min Operating Pressure With Unweighted 40 PSI
Hydraulically Buffered Pressure Gauge Provided
On Feed Manifold Provided
Rodson Universal Inc
www.rodson.com
[email protected]

Desilter
Quantity 1
Make Xi'an Changqing
Quantity Of Cones 10
Cone Size Inch 411
Type/Size Centrifugal Pump 6" X 8'SB-1V
Driven By Explosion Proof Electric Motor 100HP
Max Flow Rate 1700 GPM
Min Operating Pressure With Unweighted 30 PSI
On Feed Manifold Y/N Yes
Min Apex Valve Opening Inch 611

Mud Cleaner
Quantity 1
Make Xi’An Xingching Petroleum Eqpt Ltd
Type ZCSN-250 X 100
Shaker Driven By EP Electric Motors 1.5Kw x 2 x 2
Solid Pump Drivern by EP Electric Motor 100HP
Combined Max Flow Rate 1000 GPM
Pyramid Screen 120, 150, 180, 200, 230, 2 On Request

Stand Pipes
Quantity 2
Size 5” OD X 75ft x 5000 PSI
Valve on Manifold 5” x 5000 PSI
Manifold. No Screwed Connections.
Deviance From Specification.
Manifold To Be Capable To Line Up 1 Pump On Kill Line Or Cellar Jet With Other
Pump Lined Up On Standpipe
All Sensors On Manifold To Be Vertically Up Mounted
Pressure Gauges On Driller's Console To Read From Either Side Of Manifold
Have Spare Connection For MWD Sensor
Quantity Of Valves No 1
Diameter 2"
Complete With Kill Line Outlet
Rodson Universal Inc
www.rodson.com
[email protected]

Fill Up / Bleed-Off Line I.E. Manual Choke)


Two 2" Outlets Complete With Weco Fig 1502 Connections
Dimensions OD X ID 2" X 2"
Work Pressure 5000 PSI
Tool Pressure 5000 PSI

Rotary Hose
Quantity 1
Make Shandong,China
Type Y-103/35
ID X Pressure X Length 4" X 5000PSI X 75ft
Working Pressure 5000 PSI
Test Pressure 7000 PSI
The rotary hose and all vibrator hoses have molded connections

Casing Stabing Board And Center Belly Board


Casing Stabbing Board
Make Chuanyou Guanghan Honghua Co.Ltd
Type TFT100
Adjustable Form/To Height 30ft to 50ft
Certified With Mast Yes
Safety Stop Yes
Center Belly Board
Installed in derrick for racking limber stands of tubulars when required

Air Hoist
Make Yantai Petroleum Machinery Plant
Type JQHSB-50
Quantity 2 unit
Capacity 2X5T
Wire Diameter/Type 5/8"
Cable Guard Fitted Fitted
Installed On Rig Floor
Type JQHSB-20
Quantity 1 unit
Capacity 2X2T
Rodson Universal Inc
www.rodson.com
[email protected]

Wire Diameter/Type 1/2"


Cable Guard Fitted Fitted
Installed On the Derrick
Rider Air Hoist
Quantity 2 each

Wire Line Unit


Make Yantai Petroleum Machinery Plant
Capacity 18,000ft
Wire Diameter/Type 0.103” Braided
Cable Guard Fitted Fitted
Dephtometer Fitted
Drive with Electric Motor 10HP

Drilling Line
Size 1-3/8"
Length 1200 M
Type IWRC – XIPS
Drilling Line Drum Power Driven

Weight Indicator
Quantity 1
Make SHEN KAI
Type 2Z11
Calibrated For No Of Lines 12
Sensor Type SK-8Y01A
Dead Line Anchor
Quantity 1
Type TZG 35-R
Dead Load Rating 350 ton
Rodson Universal Inc
www.rodson.com
[email protected]

Mud Pressure Gauges and Read Outs


Mud Pressure Gauge Quantity 2
Rating 5000PSI
Digital Read Out 1
Type 2ZO L C
Pressure Range 0 – 5000PSI
Note : Digital readouts are partially satisfied by equipment listed in Paragraphs 31 and 32 of this
propossal. The system are able to collect data from the rig floor as a digital data Via sensors and can
be transmitted as a real time to the rig Foreman’s computer in a “Well Information Transfer System
(WITS)” format using a serial cable. Installed at driller’s console; SPM, Total strokes, Trip Tank
readings, Pit Volume loss/gain, % of flow

Torque Gauges
Rotary
Quantity 1
Make SHEN KAI
Type 2Z 11 - with ft-lb conversion
Tong
Quantity 1
Make SHEN KAI
Type 2Z 11 - with ft-lb conversion
Drilling Recorder
Quantity 1
Make SHEN KAI
Number of Channel 8

For record weight, pump pressure, rotary RPM, penet


Pit Level Indicator / Recorder
Make SHEN KAI
Model 2Z 11

Flow Indicator
Make SHEN KAI
Model 2Z 11

Drift Indicator
Make SHEN KAI
Quantity 2
Maximum Angle 8 degree and 16 degree (one each)
Rodson Universal Inc
www.rodson.com
[email protected]

Lighting System
Fluorescent vapor proof rig lighting and area lighting as required.
Trailer Mounted 6KW Genset 4 set
Fixed lighting system
Lighting around well location 20
Lighting around well location EYD51-40- X 2T
Lighting around shale shaker area One each
Lighting around shale shaker area EYD51-40- X 2T
Lighting on mud tanks One each
Lighting on mud tanks EYD51-40- X 2T
Lighting around mud pumps 2
Lighting around mud pumps EYD51-40- X 2T
Lighting around pipe rack area. 2
Lighting around pipe rack area. EYD51-40- X 2T
Lighting on rig floor 4
Lighting on rig floor EYD51-40- X 2T
Lighting along the mast 12
Lighting along the mast EYD51-40- X 2T
Lighting on derrickman platform 4
Lighting on derrickman platform BT251-450W-F2
Portable floodlights
Portable floodlights 4
Portable floodlights power 1KW
ELECTRICAL SAFETY DEVICE
Emergency shut down button for D.C.moto Yes
Emergency shut down button location Yes
Emergency shut down button location Yes - SCR
Emergency shut down button for A.C.users Yes
Emergency shut down button location Yes – Rig Floor
Emergency shut down button location Yes - SCR
Emergency UPS Lighting installed at the SCR house, accumulator units, and four lights on the Rig Floor
Rodson Universal Inc
www.rodson.com
[email protected]
Welding Machine
Quantity 2 unit
Output 400 Amp
Powered by 1 unit Diesel, and 1 unit AC Electric
Houses
Ware House for storage 2 units
Size 40ft x 8ft x 8ft
Utility Houses 1 units
Size 40ft x 8ft x 8ft
Dog House 1 unit
Size 20ft x 8ft x 8ft
Saudi Aramco Material H 1 unit
Size 30ft x 8ft x 8ft

Pipe Rack
Triangle Pipe Rack 8 set
Size 4 ½” OD x 30ft length x 3ft height

Low Pressure Circulating System

Two 6" x 8" Centrifugal pumps powered by 100 HP explosion proof motor with suction manifold to allow suction
from any tank and discharge to any tank through submerged mud guns.

A casing fillup line run from a gun line to the rig floor c/w necessary valving and fittings to easily control the mud
flow when filling casing; included a remote pump switch near the driller’s console

Kelly Cock H2S Service


Upper Kelly Cock
Size 5” 4”
Quantity 2 2
Type MF 5-1/4 MF 3-1/2
Working Pressure 10000PSI 10000PSI
OD Body Inch 7" 6"
ID Body Inch , 3-1/2” 2-1/2”
Type Of Connection 6-5/8 " Reg (LHT) 4 1/2 " Reg (LHT)
Rodson Universal Inc
www.rodson.com
[email protected]

Lower Kelly Cock


Quantity 2 2
Make Guanghan Yunya Guanghan Yunya
Type MF 5-1/4 MF 3-1/2
Working Pressure 10000psi 10000psi
OD Body Inch 6-1/2" 4-3/4"
ID Body Inch 3-1/2" 2-1/2"
Type Of Connection 4-1/2" IF 3-1/2" IF

Safety Valve (Full Opening Stabbing Valve) H2S Services


Quantity 2 2
Make Guanghan Guanghan
Type FOSV 4.5 FOSV 5
Working Pressure 5000psi 5000psi
OD Body Inch 5-1/2" 6-1/2"
ID Body Inch 3" 3-1/2"
Type Of Connection 4-1/2" NV 4-1/2" IF

Quantity 2 2
Make Guanghan Guanghan
Type FOSV 4 FOSV 2-3/8
Working Pressure 5000psi 5000psi
OD Body Inch 4-3/4" 3-1/2"
ID Body Inch 2-1/2" 1-3/4"
Type Of Connection 3-1/2" IF 2-7/8" Reg

Back Pressure Valve (Inside BOP) H2S Service


Quantity (No) 2 2
Make Guanghan Guanghan
Size (Inch) 4 ½” New Vam 5”
Working Pressure Rating 5000 PSI 5000 PSI

Quantity (No) 2 2
Make Guanghan Guanghan
Size (Inch) 4” 2 3/8”
Working Pressure Rating 5000 PSI 5000 PSI
Rodson Universal Inc
www.rodson.com
[email protected]

Degassing Equipmet
Degasser
Make Changging
Type ZCQ 1-4
Capacity 1200 GPM
Discharge Line Running To 6"
Vacuum Pump Make Changqing
Motor Size 3 KW
Gas Buster Yes

36” x 30’ designed as per attached FIG. I to meet SAUDI ARAMCO approval located at the choke
manifold area separate from mud tanks

Portable Blowers
Three 25,000 CFM blowers, power to be compatible with rig source - meet OSHA requirements

Cellar Jetting System


Pump Pneumatic

Blow Out Preventer Equipment


Annular Preventers
Quantity 1 unit 1 unit
Make Shanghai PMP Shanghai PMP
Type FH 54--14 FH 35--35
Size 21 ¼" 13-5/8"
Wp 2000psi 5000psi
Connection Studded Top & Flange Bottom
H2S trim to meet NACE MR-01-75
Service

Ram Preventers
Preventer type Single Gate Double Gate
Quantity 1 1
Make Shanghai PMP Shanghai PMP
Type 1FZ35-70 2FZ35-70
Size Inch 13-5/8" 13-5/8"
Wp 10000psi 10000psi
Connection Studded Top & Flange Bottom Studded Top & Flange Bottom
Rodson Universal Inc
www.rodson.com
[email protected]
Note :
3-5/8” Double Gate Ram Preventer:
10M psi WP ram preventers with ring groove flanges – H2S trim to meet NACE MR-01-75; with four (4) each 4-
1/16” 5M flanged side outlets and blind flanges installed. Class “A” – 10M psi BOP stack Fig J-3 of SAUDI
ARAMCO Well Control Manual - 3rd edition 10/2002.
The bottom cylinder of the double gate is equipped with the capability to operate Blind/ Shear rams.
3-5/8” Single Gate Ram Preventer:
10M psi WP ram preventers with ring groove flanges – H2S trim to meet NACE MR-01-75. Refer to Class “A” –
10Mpsi BOP stack Fig J-4 of SAUDI ARAMCO Well Control Manual - 3rd edition 10/02.

Ram Sizes
Blind
BOPE SIZE / WP BOP Class “CSO” FIXED CASING, TUBING OR DRILL PIPE RAM SIZES
Rams
9-5/8 7” 5” 3-1/2” 2-3/8”
13-5/8”-5M A 1 set 1set 2sets 2sets 2sets 1set
All BOP provided above follow the Saudi Aramco requirement.

Closing Unit
Make and Model SFPMW - FKS 800
Capacity of reservoir 800 gallon
Qty of size of bottles 12 bottles
Total Capacity 800 gallon
Working Pressure 3000 PS
Triplex electric driven Pump
Model Triplex Plunger Pump
Type 40 mLPR/21 MLPR
Air Pump
Make SFPMW
Type Duplex Plunger Pump
BOP Control Panel
Make and Model FKQ6406 FKQ 3204
One (1) unit, 3000 psi closing unit with minimum 14 stations. One inch (1") OD steel lines from inside of
the sub base to BOP or Flexiline 1-1/2" OD from inside of the sub base to the BOP stack. One inch (1")
lines from accumulator to the sub base. Dual power, air and electric. Capacity and operating lines as per
SAUDI ARAMCO standards.
The main accumulator unit are located at a remote location, at least 100 feet distance, shielded from the
wellhead and protected from other operations around the rig. There are two sets of remote controls for
operating the accumulator to activate the BOPs. One remote control is on the rig floor, accessible to and
visible by the driller and the other is located near the Company Representative’s office. The Master
Controls shall be at the accumulator.
The accumulator is equipped with an air line from the cold start compressor for emergency operation.
Low pressure warning light (to indicate hydraulic leaks) is installed on the unit as well as on driller’s
console.
Rodson Universal Inc
www.rodson.com
[email protected]

Adapter or Crossover Flanges


Description Quantity
Spool, Space, Adapter, 13 5/8" 5,000# x 13 5/8" 5,000# WP, w/ two 3" API 5,000# WP 1 ea
Flg. Outlets, 38" Long.
Riser Spool Adapter, 13 5/8" 5,000# x 13 5/8" 5,000# WP , 24" Long. 1 ea
Adapter, double studded, 13 5/8" 5,000# x 13 5/8" 3,000# WP, CAD Plated Studs and nuts. 1 ea
Adapter, double studded, 13 5/8" 5,000# x 11" 5,000# WP, CAD Plated Studs and nuts. 1 ea
Adapter, double studded, 13 5/8" 5,000# x 8" 5,000# WP, CAD Plated Studs and nuts. 1 ea
Adapter, double studded, 13 5/8" 5,000# x 20" 3,000# WP, CAD Plated Studs and nuts. 1 ea

Choke Manifold and Associated Lines

5,000 psi WP, H2S trim to meet NACE MR-01-75; with 3-1/8” valves, flanged and targeted elbows/ tees (as required),
and high pressure 3-1/8” COFLEX hose

Choke Manifold Consist of two (2) each 5,000 psi WP Super Chokes and one (1) hand adjustable choke
(design details subject to SAUDI ARAMCO approval). Included shall be a complete control console operated from
rig floor.

General Note: All necessary flanges, adapters, spools, valving (including HCR's), targeted elbows/tees, hard
piping and all other items and materials necessary to make up and operate the entire BOP system as per
SAUDI ARAMCO standards in all hole sizes are provided.

Make Chongqing
Size X Wp 3 1/8" X 5,000PSI
H2s Service Yes
Quantity Of Valves No 14
Make " 5,000PSI
Model YG35
Size Inch 4-1/16" +3-1/8"
Quantity Of Adjustable Chokes No. 2
Make/Type Shanghai /JF80-35
Quantity Of Power Chock No. 1
Make/Type Shanghai /JF80-35
Power Choke Remote Control Panel Location Platform
Make/Type Shanghai
C/ W Pump Stroke Counter, Pressure Gauges. And Choke Adjuster Yes
Drill Pipe Pressure Gauge On Choke Manifold Yes
Choke Pressure Readout On Drillers Console Yes
Rodson Universal Inc
www.rodson.com
[email protected]

BOP Handling System


a. 40 tons hydraulic lifting system installed in substructure and certified
A set air-powered or hydraulic powered make-up wrenches with torque readout
b.
panel including sizes to fit all BOPE flange bolts.

Spacer Spools and Mud Crosses


1 ea Spool, Space, Adapter, 13 5/8" x 13 5/8" 5,000# WP, x 3ft, H2S trim
1 ea 21-1/4” - 2000 psi flanged cross; H2S trim for sour service, with two (2) 7-1/16" side outlets and
one (1) 3-1/8”, 2000 psi side outlet offset 90 deg to the 8” outlets for installation of a kill line.
Including 2-ea 7-1/16” 2M psi hydraulic control (HCR) gate valves and Lo Torque Valve for
emergency kill line.(Fig. J-9, pg. J-19) of Saudi Aramco well control manual revised Oct. 2002.
1 set
Sufficient sections of 8” clamped/flanged steel lines for gas buster to vent beyond the back wall
of the reserve pit dike. Pipe connections and fittings are compatible with the hydraulic gate valves.

1 ea
13-5/8" – 5000 PSI flanged cross; H2S trim for sour service, with two (2) 3-1/8" – 5M PSI WP
flanged side outlets

Kill and Emergency Kill Line


Kill Line

2-1/16" 10,000 psi WP, H2S trim to meet NACE MR-01-75; with flanged valves
1 set
and hard piping from rig pumps to BOP drilling mud cross side outlet.

Emergency Kill Lines

2-1/16" 5,000 psi WP, H2S trim to meet NACE MR-01-75; with 2-1/16" flanged
1 set
valves and hard piping to BOP drilling mud cross side outlet and shall provide:

1 ea 3-1/8”, 5000 PSI WP HCR flanged valve, 1 each 3-1/8”, 5,000 PSI WP

Type “R” fanged check valve, hard piping to 100ft. from the well bore and double
1 set stud adapter from CONTRACTOR’s equipment to the casing spool and or landing
base side outlet valves. H2S trim to meet NACE MR-01-75.

NOTE: The piping system ahead of (outboard of) the check valve on either of the KILL Lines
noted above may be COFLEXIP ( 100 deg. C min. temp. service rating with molded connections.)

Chicksan & Lo-Torque Valve

2" – 5M psi WP integrated Chicksans, plus Ten (10) each, 2" – 5M psi Lo-Torque
200ft
Valves. (for pressure testing and cementing operations).
Rodson Universal Inc
www.rodson.com
[email protected]

Flare Lines
Flare piping will consist of: four (4) each x 300 ft., 3-1/2" 9.3# J-55 EUE R-2 tubing .

BOP Test Equipment & Portable Line


Air over hydraulic BOP test unit capable of pressure testing BOP components to 10,000
1 set psi complete with high pressure hoses, adapters, isolation valves and gauges with chart
recorder to test to SAUDI ARAMCO standards.
2 1/16” X 5M flanged gate valves connected in tandem with proper DSA to match ram
2 ea
preventer side outlets.
2” x 8’ standard steel hose sections with FMC style # 50 swivels and figure 1502 integral
3 ea
unions, sour gas service.

2” chiksan swivel joints; FMC style # 50 ( Part No. 415254) or equivalent, with figure 1502
4 ea
integral unions, sour gas service or equivalent.

2” chiksan swivel joints; FMC style # 10 (Part No. 415244) or equivalent, with figure 1502
4 ea
integral unions, sour gas service or equivalent

Ccomplete CIW type “F” cup testers, spare cups and seals for Saudi Aramco casing sizes
3 set and weights from 13-3/8” to 7”. End connection threads must be compatible to
CONTRACTOR’s supplied drill pipe.
Plug Testers (ported type) complete with spare seals fo Saudi Aramco casing spools and
1 set
landing bases
Flare Ignition System

a) One (1) each - Flare Control Ignition Station located at choke manifold area complete
with (3) each Solar CS 308 Igniter panels with multiple pilot sequencer functions, coil stand
and manifolds with coil box and wired for a total of 7 Sure Fire propane pilots plus hose,
1 ea
regulators, valves, gauges, copper tubing /and fittings with spares provided. Flare Igniters
will provide a reliable flare ignition source to four (4) propane pilots at the main flare pit, (1)
propane pilot at the alternate flare pit, and (2) propane pilots at the gas buster flare pit.

2 ea b) Two (2) diesel drip system for back-up flare ignition at flare pit and gas buster flare pit.

Drill Pipe, Drill Collar and Subs


Drill Pipe
Drill Pipe, internally coated with HT modified fusion bond epoxy powder coating.
Size Wt/Ft Grade Tool Joint Joints
5" 19,5 S 4-1/2" IF 800jts
4" 14 G-105 4” XT-39 700jts
2-3/8” 6,65 E 2-3/8" PAC
All drill pipes to be quenched and tampered as per API-5D supplied with Tuboscope TCS-8000 or ARNCO-
200X or equivalent hard banding tool joints. API approved drifts will be supply for all drill pipe sizes.
Certification from Manufacturer will be provided.
Rodson Universal Inc
www.rodson.com
[email protected]

Heavy Weight Drill Pipe


Size 4” 5”
No of Joints 100 jts 80 jts

Drill Collars
OD X ID No Required Wt/ft TJ Size TJ Type
9-1/2" x 2 13/16 12 220 7 5/8 Reg
8-1/2" x 2-13/16" 30 172 6-5/8 Reg
6-1/2" X 2-13/16" 30 83 4" IF
4-3/4" x 2-1/4" 30 47 3-1/2" IF
2-7/8” x 1-12” 24 16 2-3/8 PAC

All drill collars to be spiral grooved and equipped with slip recesses and lift subs
(must have full bore to circulate through and top API thread connection), except for the 2-7/8”

Pony Drill Collar

Two (2) each 15’ long compatible with 9-1/2”, 8-1/2”, 6-1/4” and 4-3/4” drill collars supplied above

Drill Pipe Pup Joints

Grade G-105 for 5" and 4" drill pipe - 2 each 5', 10' and 15' pup joints. All pup joints to be
grooved on pin end for easy identification.

Stabilizers & Reamers


Stablizers Quantity
DRILL COLLAR SIZE 9-1/2” 8-/1/2 6-1/4” 4-3/4”
FOR HOLE SIZE 28”-22”-17”-16” 12-1/2 8-3/8” 5-7/8”
Rotating Sleeve type near bit stabilizer mandrel N/A 2” N/A N/A
Rotating Sleeve type string stabilizer mandrel 2 2 N/A N/A
Non-rotating string type stabilizer mandrel 2 2 N/A N/A
Integral blade near bit type stabilizer N/A N/A 2 2
Integral blade string type stabilizer N/A N/A 2 2
We provide all stabilizers sleeves and reamers for the above tables
Reamers
DRILL COLLAR SIZE 9-1/2” 8-1/2” 6-1/4” 4-3/4”
FOR HOLE SIZE 28”, 22”, 17, 16” 12”, 12-1/4” 8-1/2”,8-3/ 5-7/8”,6”,6 1/8”
Near bit Reamer 2 2 2 2
1String Reamer 4 4 4 4
We provide all pins, blocks and cutters. “K” type cutters will be provided for hard formations on request
Rodson Universal Inc
www.rodson.com
[email protected]

Subs and Handling Tools


7-5/8"Reg Box x 7-5/8"Reg Box, drill for float 2 Ea
7-5/8"Reg Pin x 6-5/8"Reg Box, drill for float 2 Ea
6-5/8"Reg Box x 6-5/8"Reg Box drill for float 2 Ea
4-1/2” Reg Box x 4 ½” Reg Box drill for float 2 Ea
3 12/” Reg Box x 3 ½” IF Box Drill For Float 2 Ea
6-5/8"Reg Pin x NC50 Box 2 Ea
4-1/2"Reg Box x NC50 Box 2 Ea
NC50 Pin x NC33box 2 Ea
4-1/2" Reg Box X 4-1/2" Reg Box 2 Ea
4-1/2IF Pin x 4-1/2 Reg Pin 2 Ea
NC50 Box x 4-1/2" FH Pin 2 Ea
3-1/2 IF Pin x 4 XT-39 Box 2 Ea
4 XT-39 Pin x 3-1/2 IF Box 2 Ea
3-1/2IF Pin x 3-1/2 Reg Pin 2 Ea
3-1/2" Reg Box x NC33 Box 2 Ea
NC50 Pinx4-1/2" FH Box 2 Ea
4-1/2"Reg Pin x nc50 Box 1 Ea
8-5/8"Reg Box x 7-5/8"Reg Pin 2 Ea
4-1/2"Reg Box x NC50 Pin 1 Ea
6-5/8"Reg Pin x 7-5/8"Reg Box 1 Ea
NC50 Box x 5-1/2" FH Box 1 Ea
6 5/8"Reg Box x NC50 Pin 1 Ea
NC50 Box x 5-1/2" FH Pin 1 Ea
NC50 Box x NC33 Pin 1 Ea
NC50 Pin x 5-1/2" FH Box 2 Ea
NC31 Pin x NC33 Box 2 Ea
NC31 Box x NC33 Pin 1 Ea
NC50 Box x 7" Casing Thread (LTC) 1 Ea
NC50 Box x 9-5/8" Casing Thread (LTC) 1 Ea
NC50 Box x 2-7/8" Tubing Thread (EUE)
NC33 Pin x 2-3/8" Tubing Thread (EUE) 1 Ea
Rotary subs, crossover subs, handling tools, drill collar slips, and safety clamps to fit all CONTRACTOR
tools, SAUDI ARAMCO hole openers and SAUDI ARAMCO inner string cementing equipment. Bit subs,
float subs and floats for all sizes of BHA; also included shall be 2 each 4-1/2” IF pin x 4-1/2” Reg pin and
2 each 3-1/2” IF pin x 3-1/2” Reg pin crossovers for use with core barrels.
Rodson Universal Inc
www.rodson.com
[email protected]

Fishing Tools
Overshot
Quantity 1 1 1
Make Huabei Petroleum Plant
Type LT-350 LT-T302 LT-T245 LT-T154
OD Body 13-3/4 11 ¼” 9 5/8” 7 5/8”
Top Sub Connection 6 5/8” Reg 6 5/8” Reg 6 5/8” Reg 4 ½” IF
Max. catch size (spiral) 12” 10” 8” 6 ¼”
Max. catch size (basket) 10 ¾” 9 ¼” 7 ½” 5 9/16”

Hydraulic Fishing Jars


Quantity 1 1 1 1
Make Huabei PMP
Body OD 7 ¾” 6 ¼” 4¾“ 3-3/4”
Body ID 2 ¾” 2 3/8” 2” 1 ½”
Connection 6 5/8” Reg 4 ½” IF 3 ½” IF 2 7/8” Reg

Intensifiers
Quantity 1 1 1
Make Huabei PMP

Body OD 7-3/4” 6 ¼”” “
Body ID 2-3/4” 2 3/8” 2”
3
½”
Connection 6-5/8 Reg 4 ½” IF IF
Bumper Sub
Quantity 1 1 1
Make Huabei PMP
Body OD 7-3/4” 6 ¼” 4¾“
Body ID 2-3/4” 2 3/8” 2”
3 ½”
Connection 6-5/8 Reg 4 ½” IF IF
Rodson Universal Inc
www.rodson.com
[email protected]

Junk Subs and Junk Baskets


Junk Subs
Quantity 1 1 1 1
Huabei Huabei
Make PMP Huabei PMP PMP Huabei PMP
OD Body 16” 12” 8 3/8” 5 7/8”
Connection 6 5/8” Reg 6 5/8” Reg NC 50 NC 38
Reverse Circulating Junk Basket
Quantity 1 1 1 1
Huabei Huabei
Make PMP Huabei PMP PMP Huabei PMP
OD Body 16” 12” 8 3/8” 5 7/8”
6 5/8”
Connection Reg 6 5/8” Reg NC 50 NC 38
Magnet
Quantity 1 2 2 1
Huabei Huabei
Make PMP Huabei PMP PMP Huabei PMP
OD Body 16” 10” 8” 5-3/4”
6 5/8”
Connection Reg NC 50 3 ½ IF 3 ½” Reg

Flat Bottom Mill


Quantity 1 1 1 1 1
Make Huabei PMP
Mill OD 28" 22" 16" 12 ¼” 8-1/2"

Storage Tank at Site


Drill Wa
1000 bbl capacity with external lines isolated from mud pits as described in Item I-14 above.
Fuel Ta
Diesel Tan 500 bbls
Gasoline T 4000 gallon
Cement
One (1) cement mix water tanks 500 bbl capacity each with 2 Compartments of 250 bbl minimum each,
"zero dead volume", 500 bbl total capacity with agitators, adequate transfer pump, mixing hopper and
required valving/piping to allow mixing and transfer of fluids from compartment(s) to service company
cementing unit. Adequate lighting, grating and hand rails.
Well Flu

Diesel well fluid storage in covered tank(s), 1000 bbl, complete with transfer pump mounted on the
tank(s) and plumbed to provide loading or unloading to rig or pump truck as required by operations.
Rodson Universal Inc
www.rodson.com
[email protected]

Casing and tubing Handling Tools

Casing Elevators
Quantity 1 1 1 1 1 1 1
Type Hinged Side Door Side Door Slip Side Door Slide Door Slip
Casing Size 24” 18-5/8” 13-3/8” 13-3/8” 9-5/8” 7”” 7”
Load Rating 250 ton 150 ton 150 ton 250 ton 150 ton 150ton 350ton
Casing Elevators
Quantity 1 1 1 1 1
Center Center Center Latch
Type Slip Slip
Latch Latch
Casing Size 7” 4-1/2” 3-1/2” 2 7/8” 2 3/8”
Load Rating 75ton 75ton 75 ton 75ton 75ton

Casing Slips
Quantity 2 2 2 2 2 2 2 2
Casing Siz 24” 18 5/8” 13 3/8” 9 5/8” 7” 4-1/2” 2-7/8” 2-3/8”
Load Ratin 100ton 100ton
250ton 250ton 350ton 350ton 350 ton 100ton
Single Joint Pick Up Elevator
Quantity 3 3 3 3 3 3 3 3
Casing Siz 24” 18 5/8” 13 3/8” 9 5/8” 7” 4-1/2” 2-7/8” 2-3/8”

Casing Hydraulic Power Tong


Quantity
Make and Type Ludong M 13
With insert and Back Up Tong for casing size 2 7/8” up to 13 3/8”
Casing Hydraulic Power Tong
Quantity 1
Make and Type Ludong M 16
With insert and back Up Tong for casing size 13-3/8 up to 18-5/8”
Hydraulic Power Unit
Quantity 1
Prime mover Electric Motor
Rodson Universal Inc
www.rodson.com
[email protected]

Hydraulic Power Tubing Tong

Quantity 1
Make and Type Ludong TX
With insert and Back Up Tong for tubing size 2 3/8” up to 4 1/2"”
Manual Rotary Tong
Quantity 2
Make Baoji
For Casing Size and C/w Jaw for Casing 13-5/8 up 18 5/8
Manual Rotary Tong
Quantity 2
Make Baoji
For Casing Size and C/w Jaw for Casing 2-3/8 up 13 3/8”

Rotatin

1 One (1) 9 5/8” Baker C-3 Roto-Vert (or equiv.) dressed for 29.3# - 58.4# casing w/4 1/2”
Reg pin X Box connections (box down/pin up) or equivalent.

One (1) 7” Baker C-3 Roto-Vert (or equiv.) dressed for 17# - 35# casing w/3 1/2” Reg pin X
Box connections (box down/pin up) or equivalent

One (1) 5-1/2” Baker C-3 Roto-Vert (or equiv.) dressed for 17# - 23# casing w/2 3/8” Reg
pin X Box connections (box down/pin up) or equivalent.

One (1) 4-1/2” Baker C-3 Roto-Vert (or equiv.) dressed for 11.6# - 13.5# casing w/2 3/8”
Reg pin X Box connections (box down/pin up) or equivalent.
Rodson Universal Inc
www.rodson.com
[email protected]

Safety Equipment
Adequate fire fighting equipment to include as a minimum
Fire Extinguishers – Dry Chemical – Type BC ANSUL
Number Size Location
2 150# On Wheeled cart
1 150# Camp
Number Size Location
2 30# On rig floor
1 30# At each mud tank
1 30# At each generator
1 30# At accumulator
1 30# At each mud pump
1 30# At gasoline fuel tank
1 30# At diesel tank
2 30# At rig office
1 30# At camp generator
As necessary 30# At camp
1 30# Utility House
1 30# Warehouse
1 30# SAUDI ARAMCO Material House
Fire Extinguishers
2 10# At each electrical switch panel (CO2)
1 10# At each camp kitchen
Equipment and supplies to re-charge also to be provided.
Water Inje

Three live reeled fire hoses (horizontal), each having 1-1/4" x 100' fire hoses (125 psi working pressure)
with combination stream/fog nozzles capable of delivering 250 GPM - located on rig floor, by prime mover
and pipe rack. Note: to be used for fire fighting or drills only and should be powered by independent diesel
engine

Gas detectors, H2S detectors), breathing apparatus: (Scott Air Paks), a cascade type safety unit,
emergency and other safety equipment .
Rodson Universal Inc
www.rodson.com
[email protected]

Internal Communication
Internal telephone system (intercom) GAI-tronic or better (Intrinsically safe) 10 stations including
one (1) acoustic cabin and nine (9) explosion proof types. Stations to have clearly audible alert
ringers.
Three (3) loud speakers for general paging
Separate system for "hands off - talk back" on call between

Mud
M

Two (2) each approximately 30 ft X 9 ft X 5 ft (inside) steel boxes on lift rail with one removable
side (not end) and steel plate floor.

One (1) each approximately 30 ft X 9 ft X 3 ft (inside) steel boxes on lift rail with one removable
side (not end) and steel plate floor

Two (2) each approximately 30 ft X 9 ft X 5 ft (inside) sun shielded steel boxes on lift rail with
one removable side (not end) and steel plate floor to be used to store chemical drums.

Included heavy canvas to covers for the above boxes and provide rain protection for mud
materials

You might also like