Scribd Logo
Upload

Welcome to Scribd!

  • 181 views

    Cable 5D

    Uploaded by

    Carlos Andrés Jiménez M
    Transport of IF Signal between ODU & IDU RTN Series

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cable 5D

    Uploaded by

    Carlos Andrés Jiménez M
    181 views2 pages
    Transport of IF Signal between ODU & IDU RTN Series

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Transport of IF Signal between ODU & IDU RTN Series

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    181 views2 pages

    Cable 5D

    Uploaded by

    Carlos Andrés Jiménez M
    Transport of IF Signal between ODU & IDU RTN Series

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    IF Cable Page 1 of 2

    IF Cable
    The IF cable connects the ODU and IDU. The IF cable is used to transport the IF signal, O&M signal, and –48
    V power between the ODU and the IDU.
    IF cables are of three types, namely, 5D cable, 1/2-inch cable, and RG-8U cable.

    • If the distance between the IDU and the ODU is less than 120 meters, use the 5D cable. One end
    of the 5D cable needs to be terminated with a type-N connector for connecting to the IF interface
    of the ODU. The other end of the 5D cable needs to be terminated with a TNC connector for
    connecting to the IF interface of the IDU.
    • If the distance between the IDU and the ODU is within 120 meters to 180 meters, use the RG-8U
    cable. Both ends of the RG-8U cable need to be terminated with the type-N connectors for
    connecting to the IF interface of the ODU and the IF jumper of the IDU, respectively.
    • If the distance between the IDU and the ODU is within 180 meters to 300 meters, use the 1/2-inch
    cable. Both ends of the 1/2-inch cable need to be terminated with the type-N connectors for
    connecting to the IF interface of the ODU and the IF jumper of the IDU, respectively.

    Cable Diagram

    Figure 1 Diagram of the IF cable

    1. RF coaxial cable connector, type-N, male 2. RF Coaxial Connector, type TNC, male

    Cable Connection Table

    None.

    http://localhost:7890/pages/31183628/06%20(2009-06-15)/31183628/06%20(2009-06-15)/... 12/3/2015
    IF Cable Page 2 of 2

    Technical Specifications

    Table 1 Technical specifications of the IF cable


    Item Performance
    5D Cable RG-8U Cable 1/2-Inch Cable
    Characteristic impedance 50 50 50
    (ohm)
    Attenuation (dB/100 ≤ 10.0 (140 MHz) ≤ 6.0 (140 MHz) ≤ 5.0 (140 MHz)
    meters) ≤ 15.0 (350 MHz) ≤ 9.0 (350 MHz) ≤ 7.8 (350 MHz)

    DC resistance (ohm/km ≤ 11.0 ≤ 4.9 ≤ 4.3


    at 20°C)
    Cable diameter (mm) 7.60 10.16 13.40

    Parent topic: Cables

    Huawei Proprietary and Confidential


    Copyright © Huawei Technologies Co., Ltd.

    http://localhost:7890/pages/31183628/06%20(2009-06-15)/31183628/06%20(2009-06-15)/... 12/3/2015

    You might also like