B1 B2

FAMA
FREQUENCY
TRANSDUCER

75,0 mm
SUPPLY

OUTPUT
OFFSET ZERO
FREQUENCY MEASURING
TRANSDUCER
VOLT 5V
10mA

10V

Type: FAMA
mAMP 20mA
NO OFFSET

+ - A1 A2

35,0 mm 100,0 mm

105,0 mm

FEATURES Description:
The transducer type FAMA is used to measure the frequency of an
input voltage. The output is a load independent DC voltage or current
• High input resistance signal. The input can be connected directly or via transformers.
• Low response time
• Excellent linearity Operation:
• All ranges class 0.5 according to EN60688. The input voltage is transformed to a suitable signal level. At each
zero-crossing the input creates a rectangular pulse with a constant
• 8 outputs available height and width. The pulse train, with a frequency proportional to
• Isolation > 4kV. Input, output and supply. that of the input voltage, is filtered and in amplifier converted to a
load independent DC output. The input voltage can also be used
• All standard AC voltages for power supply. as supply voltage. The supply voltage is galvanically separated by
Optional combined AC and DC supply. the plug-in transformer.

Applications:
Instrumentation, PLCs, PC and microprocessor control systems .

FUNCTION DIAGRAM
AC Supply AC/DC Supply

AC supply Supply
Isolation Isolation
=
˜=
A2
˜=
A2 Supply
Supply
A1 A1 =
AC input AC input
B2 B2 +
Input
˜=
+ DC output
-
Input
B1 ˜= -
DC output

{
B1
Signal
Isolation {
Output
Signal
Isolation Output

OUTPUT CHARACTERISTICS OUTPUT ACTUATOR

OUT
OUT
0 - 10 mA

2 - 10 mA

IN 0 - 20 mA
IN
4 - 20 mA

0 - 5V

1 - 5V
Output: 0 - 10 mA, 0 - 20 mA Output: 2 - 10 mA, 4 - 20 mA
0 - 10 V
0 - 5 V, 0 - 10 V 1 - 5 V, 2 - 10 V
2 - 10 V

CONNECTION DIAGRAM
Rail mounting Socket mounting
B1 B2

6
5 7
B1 B3
4 8

FAMA 3 9

2 10
+ - A1 A2 1 11
A1 + - A2

Output Supply

77

Thiim A/S Transformervej 31 Tel.: +45 4485 8000 Web: www.thiim.com

2860 Søborg - Denmark Fax: +45 4485 8005 Mail: [email protected]
 SPECIFICATIONS ORDERING INFORMATION

INPUT FAMA AC voltage EXAMPLE: FAMA 450 1 550 1 400 2 B 230 D A 3 C

Nominal input VN Specify from 10 to 600 V
Max. continuous input 40√UN V rms. 10 V < UN < 300 V TYPE
720 V rms. UN > 300 V Frequency measuring transducer FAMA
Input resistance approx. 2 KΩ / V
AC frequency range 0 to 5000 Hz FREQUENCY RANGE
Lower level
PERFORMANCE PARAMETERS The first three figures of the
TIMING frequency in Hz, e.g. 45.0 Hz xxx
Response time < 200 msec. 0-90% or 100-10%
ELECTRICAL Followed by:
Precision Class 0.5 0 for Hz = 1.00 to 9.99 0
Linearity < 0.2 % 1 for Hz = 10.0 to 99.9 1
Supply dependence < ± 0.01 % / % DU supply 2 for Hz = 100 to 999 2
Temp. dependence < ± 0.01 % / °C
Ripple < 1 % pp High level
The first three figures of the
OUTPUT frequency in Hz, e.g. 55.0 Hz xxx
The output amplifier is protected against open and short circuit.
Followed by:
SUPPLY 0 for Hz = 1.00 to 9.99 0
AC and DC 18-360 VDC and 20-264 VAC 1 for Hz = 10.0 to 99.9 1
with isolated switchmode supply 2 for Hz = 100 to 999 2

AC supply range 24 V (From 20 to 28 V)
with transformer 110 V (From 99 to 140 V) VOLTAGE RANGE
230 V (From 198 to 264 V) The first three figures of the
400 V (From 342 to 484 V) voltage in Volt, e.g. 400 V 400

Frequency range 45 to 440 Hz (transformer)

Power consumption 2.5 VA, 1.1 W Followed by:
Frequency range 45 to 440 Hz 1 for V = 10.0 to 99.9 1
Power consumption 2.5 VA, 1.5 W 2 for V = 100 to 999 2
PLUG-IN supply module According to specifications

SUPPLY VOLTAGE
GENERAL 18-360 VDC and 20-264VAC E400
Temperature range - 25 °C to + 55 °C 20-28 VAC B024
Humidity Up to 90 % RH non-condensing 99-140 VAC B110
Dielectric test voltage Input to output 4000 VAC 198-264 VAC B230
Input to supply (internal) 4000 VAC 342-484 VAC B400
Output to supply (internal) 4000 VAC 352-576VAC B460
Weight 0.20 kg with internal supply
OUTPUT
Programmable with dipswitch D
0 - 10 mA, 2 - 10 mA,
International Standards 0 - 20 mA, 4 - 20 mA,
EMC directive 89/336: EN50081 - Emission 0 - 5 V, 1 - 5V
EN50082 - Immunity 0 - 10 V, 2 - 10 V
Low voltage directive 73/23: EN60255 - Electrical Relays
EN60688 - Measuring transducers HOUSING
Rail mounting with internal supply A
Socket 11 pin with internal supply E

SIZE
35 mm. 3

CODE
Code end C
Extended code E

78

We reserve the right to make changes for product improvement. FAMA.indd - 241114