Please provide the names of proposed team members under the appropriate classification.

Use the information in the

Qualifications tab to determine the title that best fits each individual's experience and qualifications.
CONSULTING ENGINEER (Seismic) SENIOR ENGINEER (Seismic)

RONALDO S. SISON JOSEPH RAMIL MANALO

ADAM ABINALES CONRAD ROXAS

WILFREDO LOPEZ

CEZAR PABALAN

ANTHONY V.C. PIMENTEL

LESSANDRO GARCIANO

CARLOS VILLARAZA
 classification. Use the information in the
ence and qualifications.
ENGINEER (Seismic)

FRANZ ROXAS
 Structural Engineering and Design Unit Pricing Templates

Principal Duty
Performs engineering and/or applied research of a unique and unprecedented nature and acts as a consulting expert in seismic assessment, engineering, and finite element modeling (FEM) of electrical and mechanical
equipment.

Job Knowledge, Skills and Abilities

A Consulting Engineer must possess the technical aptitude and capability to work as an individual researcher or team leader to conceive, plan, and conduct investigations in unique and important areas for which engineering
precedents are rare or nonexistent. The Consulting Engineer must also possess the ability to: perform highly-technical engineering analysis, finite element modeling, communicate effectively, and to provide innovative solutions
CONSULTING ENGINEER (Seismic) to complex and unique problems.

Experience/Education (Directly Related)

Minimum of fourteen years with Professional Engineer's License in California or equivalent experience.
Minimum of ten years of experience developing fragility curves for structural performance.
Minimum of eight years of experience preparing seismic assessments of high voltage (220kV & 500kV) electrical substations; performing seismic qualification of electrical and mechanical substation equipment using finite
element modeling; engineering and designing substation facilities in high seismic zones; providing seismic retrofit solutions for strengthening existing structures; performing time history dynamic analysis as defined in IEEE std.
693 section 6.2.4.
Experience with preparing structural drawings and specifications for seismic retrofit projects.
Experience with conducting assessment and designs using IEEE 693, IEEE 1527, ASCE 7, and building code.
Must be a License in Civil and/or Structural Engineering in California.

Principal Duty
Performs engineering and/or applied research projects in seismic assessment, engineering, and finite element modeling (FEM) of electrical and mechanical equipment.

Job Knowledge, Skills and Abilities

A Senior Engineer must possess the technical aptitude and capability to work as an individual researcher or team leader to conceive, plan, and conduct investigations in unique and important areas for which engineering
precedents are uncommon. The Senior Engineer must also possess the ability to: perform engineering analysis, finite element modeling, and to provide innovative solutions to complex and unique problems.
SENIOR ENGINEER (Seismic)
Experience/Education (Directly Related)
Minimum of twelve years with Professional Engineer's License in California or equivalent experience.
Minimum of six years of experience developing fragility curves for structural performance.
Minimum of five years of experience preparing seismic assessments of high voltage (220kV & 500kV) electrical substations; performing seismic qualification of electrical and mechanical substation equipment using finite
element modeling; engineering and designing substation facilities in high seismic zones; providing seismic retrofit solutions for strengthening existing structures; performing time history dynamic analysis as defined in IEEE std.
693 section 6.2.4.
Experience with preparing structural drawings and specifications for seismic retrofit projects.
Experience with conducting assessment and designs using IEEE 693, IEEE 1527, ASCE 7, and building code.
Must be a License in Civil and/or Structural Engineering in California.

Principal Duty
Performs engineering and/or applied research projects in seismic assessment, engineering, and finite element modeling (FEM) of electrical and mechanical equipment.

Job Knowledge, Skills and Abilities

An Engineer must possess the technical aptitude and capability to work independently with direction from a team leader to help conceive, plan, and conduct investigations in unique and important areas for which engineering
precedents are uncommon. The Engineer must also possess the ability to: perform engineering analysis, finite element modeling, and to provide innovative solutions to complex and unique problems.
ENGINEER (Seismic)
Experience/Education (Directly Related)
Minimum of six years with Professional Engineer's License in California or equivalent experience.
Minimum of four years of experience developing fragility curves for structural performance.
Minimum of three years of experience preparing seismic assessments of high voltage (220kV & 500kV) electrical substations; performing seismic qualification of electrical and mechanical substation equipment using finite
element modeling; engineering and designing substation facilities in high seismic zones; providing seismic retrofit solutions for strengthening existing structures; performing time history dynamic analysis as defined in IEEE std.
693 section 6.2.4.
Experience with preparing structural drawings and specifications for seismic retrofit projects.
Experience with conducting assessment and designs using IEEE 693, IEEE 1527, ASCE 7, and building code.
Must be a License in Civil and/or Structural Engineering in California.
 8/6 8/13 8/20 8/27 9/3 9/10 9/17 9/24 10/1 10/8 10/15 10/22 10/29 11/5 11/12 11/19 11/26 12/3 12/10 12/17 12/24 12/31 1/7 1/14 1/21 1/28 2/4 2/11 2/18 2/25 3/4 3/11 3/18 3/25
8/10 8/17 8/24 8/31 9/7 9/14 9/21 9/28 10/5 10/12 10/19 10/26 11/2 11/9 11/16 11/23 11/30 12/7 12/14 12/21 12/28 1/4 1/11 1/18 1/25 2/1 2/8 2/15 2/22 3/1 3/8 3/15 3/22
Proposed
Proposed Start
Project Milestones Completion
Date
Date
Task One: Low-Profile Rigid Operating and Transfer Bus Switchrack
Milestone 1. Identify and rank all substations of this category. 8/6/2018 8/17/2018 OUR PROPOSED DELIVERY TIME
Milestone 2. Complete site visit to top five ranked substations. 8/20/2018 8/24/2018 SCE REQUIRED DELIVERY TIME
Milestone 3. Provide finite element model of switchrack. 8/20/2018 9/21/2018
Milestone 4. Provide fragility curve for each component. 9/17/2018 10/12/2018
Milestone 5. Provide structural drawings for mitigation strategies. 9/24/2018 10/5/2018
Milestone 6. Provide final report and training on using FEA model. 10/8/2018 10/26/2018
TENTATIVE TRAINING
Task Two (A) : 4kV Indoor Pipe rack
Milestone 1. Identify and rank all substations of this category. 8/27/2018 9/7/2018 OUR PROPOSED DELIVERY TIME
Milestone 2. Complete site visit to top five ranked substations. 9/10/2018 9/14/2018 SCE REQUIRED DELIVERY TIME
Milestone 3. Provide finite element model of switchrack. 9/10/2018 10/26/2018
Milestone 4. Provide fragility curve for each component. 10/29/2018 11/23/2018
Milestone 5. Provide structural drawings for mitigation strategies. 10/29/2018 11/9/2018
Milestone 6. Provide final report and training on using FEA model. 11/19/2018 1/4/2019
TENTATIVE TRAINING
Task Two (B) : 12kV/ 16kV Outdoor Pipe Rack
Milestone 1. Identify and rank all substations of this category. 9/17/2018 9/28/2018 OUR PROPOSED DELIVERY TIME
Milestone 2. Complete site visit to top five ranked substations. 10/1/2018 10/5/2018 SCE REQUIRED DELIVERY TIME
Milestone 3. Provide finite element model of switchrack. 10/1/2018 11/16/2018
Milestone 4. Provide fragility curve for each component. 11/12/2018 12/21/2018
Milestone 5. Provide structural drawings for mitigation strategies. 11/12/2018 11/30/2018
Milestone 6. Provide final report and training on using FEA model. 12/172018 2/8/2019
TENTATIVE TRAINING
Task Three: 16kV & 12kV Rigid Jack Bus Switchrack
Milestone 1. Identify and rank all substations of this category. 10/1/2018 10/12/2018 OUR PROPOSED DELIVERY TIME
Milestone 2. Complete site visit to top five ranked substations. 10/15/2018 10/19/2019 SCE REQUIRED DELIVERY TIME
Milestone 3. Provide finite element model of switchrack. 10/15/2018 11/30/2018
Milestone 4. Provide fragility curve for each component. 12/3/2018 12/28/2019
Milestone 5. Provide structural drawings for mitigation strategies. 12/3/2018 12/21/2018
Milestone 6. Provide final report and training on using FEA model.  12/24/2019 2/22/2019
TENTATIVE TRAINING