Scribd
Upload
408 views14 pages

Software Upgrade-F120B PDF

The document provides instructions for upgrading the software on a JioPhone LF-2403 device. It involves downloading the software file, tool, and drivers from a website. Then installing the drivers and software tool, and using the Qflash tool to select the software file and start the download process. The download progress can be monitored and upon completion, the phone must be switched off and back on by removing and replacing the battery to complete the software upgrade.

Uploaded by

prakash jha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
408 views14 pages

Software Upgrade-F120B PDF

The document provides instructions for upgrading the software on a JioPhone LF-2403 device. It involves downloading the software file, tool, and drivers from a website. Then installing the drivers and software tool, and using the Qflash tool to select the software file and start the download process. The download progress can be monitored and upon completion, the phone must be switched off and back on by removing and replacing the battery to complete the software upgrade.

Uploaded by

prakash jha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

JioPhone

LF-2403 Software Upgrade Process

Version 1.0
Software Upgrade Process
 Download the Software file, Tool & Drivers from http://devicesupport.ril.com

 The Download Software package will be in Zip format, kindly Unzip the same.

 Post Unzip you will get –

Software file (LYF-LF2403-000-01-23-250617)


Software Tool (Qflash Tool Release 5.0.2)
Driver File (QUD.WIN.1.1 Installer-10040.5)

 Driver Installation:

Open QUD.WIN.1.1 Installer-10040.5 Folder & double click on Setup.exe to start the Driver Installation.

LF-2403 Software Upgrade Process 2


Software Upgrade Process

 Click on Next to Proceed Further.  Select “I accept the Terms in the License Agreement.”
 Click on Next to Proceed further.

LF-2403 Software Upgrade Process 3


Software Upgrade Process

 Click on Install to proceed with Installation.

LF-2403 Software Upgrade Process 4


Software Upgrade Process

 During Installation, the above Pop-Up will come.


 Enable “Always trust Software from Qualcomm Incorporated”  Click on Finish to complete the Driver Installation.

LF-2403 Software Upgrade Process 5


Software Upgrade Process

 If the Driver is Installed Successfully, the Jio


Phone (LF-2403) will get detected as
“Qualcomm HS-USB Diagnostics 9091
(Com XX) Under Ports in Device Manager.

Note: Phone to be Connected in Power ON


Condition to check whether Driver is Installed
correctly.

LF-2403 Software Upgrade Process 6


Software Upgrade Process
Software Tool Installation:

 Open the Folder “Qflash Tool Release 5.0.2” & double click on Setup.exe to start the Software Tool installation.
 Click on Next & proceed further.
 Select “Everyone” & click on Next to proceed.

LF-2403 Software Upgrade Process 7


Software Upgrade Process

 Click on Next to proceed with installation process.

LF-2403 Software Upgrade Process 8


Software Upgrade Process

 Click on Close to complete the installation process.


 On Successful installation of Tool, Qflash Tool Icon will be created in the Desktop.

LF-2403 Software Upgrade Process 9


Software Upgrade Process

 Connect LF-2403 to the system.


 Click on Load Content & select the Software folder “LYF-LF2403-000-01-23-250617”
 Select contents.xml file from the Software folder.

LF-2403 Software Upgrade Process 10


Software Upgrade Process

 After the Content.xml file is selected, the phone will get detected as “Qualcomm HS-USB Diagnostics 9091 (Com XX) in the tool.
 Click on Download Content to start the Software upgrade process.

LF-2403 Software Upgrade Process 11


Software Upgrade Process

 During the Software upgrade process, you can see the upgrade progress in the progress bar.
 Also you can see the % File transferred, which increases with time.
Note – Once the software upgrade process starts, the Download Content Tab will not be highlighted.

LF-2403 Software Upgrade Process 12


Software Upgrade Process

 On Successful completion of Software, “done” message will be displayed in the tool & also the Download Tab will be highlighted.
 Please note after successful Software upgrade, the device is in Download Mode (QDLoader Mode).
 Hence you need to remove the Battery & refix the battery again to switch on the Phone.

LF-2403 Software Upgrade Process 13


"Talent wins games but teamwork
&
intelligence win championships."

You might also like