Scribd Logo
Upload

Welcome to Scribd!

  • 124 views

    Method Statement: Asian Insulation Co.-Qatar

    Uploaded by

    Erin Johnson
    This document provides a method statement for insulating and cladding test tanks at the Khalifa Stadium Project in Qatar. It outlines the responsibilities and materials to be used, as well as the procedures for installing insulation, cladding, and securing the materials. The insulation will consist of foam glass and polyurethane foam slabs, and the cladding will be aluminum sheeting. Health and safety measures are also described to ensure worker protection during the project.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Method Statement: Asian Insulation Co.-Qatar

    Uploaded by

    Erin Johnson
    124 views6 pages
    This document provides a method statement for insulating and cladding test tanks at the Khalifa Stadium Project in Qatar. It outlines the responsibilities and materials to be used, as well as the procedures for installing insulation, cladding, and securing the materials. The insulation will consist of foam glass and polyurethane foam slabs, and the cladding will be aluminum sheeting. Health and safety measures are also described to ensure worker protection during the project.

    Original Description:

    dd

    Original Title

    hyd

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a method statement for insulating and cladding test tanks at the Khalifa Stadium Project in Qatar. It outlines the responsibilities and materials to be used, as well as the procedures for installing insulation, cladding, and securing the materials. The insulation will consist of foam glass and polyurethane foam slabs, and the cladding will be aluminum sheeting. Health and safety measures are also described to ensure worker protection during the project.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    124 views6 pages

    Method Statement: Asian Insulation Co.-Qatar

    Uploaded by

    Erin Johnson
    This document provides a method statement for insulating and cladding test tanks at the Khalifa Stadium Project in Qatar. It outlines the responsibilities and materials to be used, as well as the procedures for installing insulation, cladding, and securing the materials. The insulation will consist of foam glass and polyurethane foam slabs, and the cladding will be aluminum sheeting. Health and safety measures are also described to ensure worker protection during the project.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    METHOD STATEMENT

    FOR INSULATION & CLADDING OF


    TES TANKS
    AT
    KHALIFA STADIUM PROJECT

    Submitted By:

    ASIAN INSULATION CO.- QATAR

    Rev. No. Date Status Prepared by Checked Approved


    by by
    0 10.10.2015 Issued for review and approval. SK SC RD

    Page 1 of 6
    INDEX

    1. PURPOSE & SCOPE

    2. REFERENCE

    3. RESPONSIBILITIES

    4. MATERIAL

    5. PROCEDURE

    6. INSPECTION & REPORTING PROCEDURE

    7. HEALTH, SAFETY & ENVIRONMENTAL

    8. ATTACHMENT

    Page 2 of 6
    1.0 Purpose & Scope

    To establish the procedure to define the methodology for the installation of


    Insulation & Cladding on TES Tank at Doha Khalifa Stadium Project., strictly in
    accordance project specifications.

    The Method Statement has been specifically created for the supply, fabrication
    and installation of Insulation & cladding on TES Tank as per the prescribed
    scope of work.

    2.0 Reference

    This method statement is strictly in accordance with Specifications.

    3.0 Responsibilities
    All our field staff proposed to be deployed for the execution of this insulation &
    cladding works are under our direct employment and are highly experienced in
    the field, some of key technicians are with us for the past more than 20 years
    executing similar and identical insulation jobs.

    3.1 Instructions

    Supervisors & foreman shall ensure compliance of this method statement and
    pass on the required instruction down the route on day to day bases towards
    implementation of this method statement, project specifications, quality and
    safety aspects, incase of any doubt the field staff, foreman and others will
    approach the supervisor for clarifications.

    All the work force such as fabricator(s), fitter(s) & insulator(s) shall possess
    relevant knowledge familiar with the handling & application of these materials.

    Page 3 of 6
    3.2 Initial Check

    The Supervisor designated for this task will ensure that the tank have been
    released from mechanical, painting and all other activities required to be
    completed prior to installation of insulation.

    To check that all surfaces to be insulated are clean, dry and free from grease,
    dirt & foreign materials and the surrounding area is free of obstacles and debris
    etc.

    4.0 Materials

    4.1 Insulation Material

    4.1.1 The basic insulation material for tank bottom shall be foam glass of 100mm
    thickness x 125kg/mᶟ density.

    4.1.2 The insulation materials for tank shell and roof shall be polyurethane foam
    slabs of single 100mm thickness with outer side foil faced having 32-35kg/mᶟ
    density

    4.2 Jacketing Material

    4.2.1 Plan Aluminum sheet of 1.0mm thickness.

    4.3 Securing Material

    4.3.1 Nylon bands

    4.3.2 Aluminum Rivets

    Page 4 of 6
    5.0 Procedure
    5.1 Insulation Procedure

    5.1.1 Polyurethane slabs shall be installed on the tank shell and roof with
    adhesive on circumferential & longitudinal joints for single application, care shall
    be taken to ensure that the inner bore of slab is kept free of joint sealant and that
    adhesion to the tank wall does not occur.

    5.1.2 Care shall be taken to ensure that tensioning of band does not crack or
    damage the insulation, Metal bands shall not be used as the same can damage
    the insulation.

    5.1.3 All insulation interruption(s) / termination shall have vapor stop mastic
    wherever required.

    5.1.4 All polyurethane joints shall be butted together shall have staggered joints
    with 6 inch offset (sketch attached)

    5.1.5 Alternatively Polyurethane slabs can be directly factory applied cladding, in


    that event foil faced would not be required.

    5.2 Jacketing Procedure

    5.2.1 Tanks shell and roof shall be cladded with flat metal sheeting to confirm the
    insulated diameter of tank shell with vertical joint seam and horizontal overlaps.

    5.2.2 All the cladding on tanks shell and roof shall be fitted to vertical seams with
    machine tensioned and shall be provided with silicon sealant to prevent ingress
    of water and all horizontal joints shall have overlap of not less than 50mm and
    shall also be sealed with silicon sealant.

    5.2.3 All the horizontal joints shall be installed weather side down to prevent
    ingress of water and shall be sealed with rivets and silicon shall be applied.

    5.3 Securement Procedure

    5.3.1 Ensure that reinforcement of polyurethane slabs would be fastened by


    means of Nylon bands machined tensioned and locked of size 18-20 wide
    spaced at 50mm from each end of slab and at intermediate intervals of not more
    than 300mm distance.

    5.3.2 Jacketing shall be secured circumferentially with aluminum rivets.

    Page 5 of 6
    5.3.3 All vertical joints shall be standing seam joint sealed with silicon.
    6.0 Inspection and reporting procedures

    6.1 All inspection(s) shall be carried out initially by Supervisor followed with our
    QC Inspector strictly according to the inspection and test plan (ITP) at all stages
    of application and on completion of final inspection for the relevant completed
    work and will inform main contractor’s and client’s quality department for final
    acceptance.

    7.0 Health, Safety & Environment


    During the execution of the job we would comply with the following measures,
    in addition we would also follow HSE plan of our parent company accredited with
    ISO 9001 : 2008.

    The designated safety officer will ensure that all our field staff and workers
    involved in insulation and other related activity will wear protective equipment at
    all times and will also ensure that none of the safety equipment is damaged.
    Safety office and supervisor will ensure that the work at height is not carried out
    during inclement weather.
    All care shall be taken while working in open sun and high humid conditions and
    ensure availability of sufficient drinking water and adequate rest break as
    permissible.
    The work place shall be free from rubbish, junk, debris and shall always be
    clean,for this purpose housekeeping will be regularly carried out at our work
    site. In addition to the above factors we would also comply with HSE Policy of
    the client.

    8.0 ATTACHMENT

    8.1 Sketch of vertical seam joints and polyurethane spacing joints.

    Page 6 of 6

    You might also like