14.Cttc Bhuvaneshwar Admma Qualfile

ADVANCED DIPLOMA IN MACHINE
MAINTENANCE AND AUTOMATION

(ADMMA)
QUALIFICATION FILE
Ministry of Micro, Small and Medium

Enterprises, New Delhi
(MSME-Technology Centre)
NSQF QUALIFICATION FILE
Version 6: Draft of 08 March 2016
NSDA Reference
CONTACT DETAILS OF THE AWARDING BODY FOR THE QUALIFICATION

Name and Address of Awarding Body:
MSME Technology Centre,
B-36, Chandaka Industrial Area
Bhubaneswar-751024
Odisha
Name and Contact Details of Individual dealing with submission:

L.Raja Sekhar
Dy. General Manager
Contact No. +91 9437491950
Email- [email protected]
List of documents submitted in support of the Qualification File:

1. Detailed Curriculum (Ref: Annexure-I)
1
SUMMARY
Qualification Title:
ADVANCED DIPLOMA IN MACHINE MAINTENANCE AND AUTOMATION
Nature and Purpose of the Qualification: Advanced diploma Course
Code: MSME / ADMMA / 44
Purpose:
Learners who attain this qualification can
 Perform maintenance activities of different workshop machines and equipment.
 Measure and control process equipment
 Calibrate in accordance with approved procedures.
Body/bodies which will award the Qualification:

Ministry of Micro, Small and Medium Enterprises, New Delhi
(Certificate awarded by MSME Technology Centre, Bhubaneswar)
Body which will accredit providers to offer courses leading to the qualification:
Ministry of Micro, Small and Medium Enterprises, New Delhi
Body/bodies which will be responsible for assessment:
Examination Cell of Central Tool Room and Training Centre, Bhubaneswar
Occupation(s) to which the Qualification gives access:
Entrepreneur/ Maintenance Engineer / Automation Engineer.
Proposed level of the Qualification in the NSQF:
Level-6
Anticipated volume of training /learning required to complete the Qualification:
6 month (780 Hours)
Entry requirements/recommendations:
Preferably Diploma in Electrical/Instrumentation or equivalent Engineering pass.
Progression from the qualification:
After completion of course and after 3 years of field experience the trainee can work as a
Service engineer and after that 5 years of experience, the person can work as Maintenance
Engineer/Maintenance Supervisor.
Planned arrangements for the Recognition of Prior Learning (RPL)
Yes
International comparability where known:
US: - ATS Applied Tech Systems LLC. Conduct a modular skill development programme whose
title is ‘Maintenance of Automation System’ for 8 days duration. However, the course is
focused on Maintenance of Automation System only. It does not speak about maintenance of
Machineries used in manufacturing sector.
2
Formal Structure of the Qualification:
Title of component Mandatory/ Estimated size

optional (learning hours) Level
Machine Operation M 60 Level-6
Electrical Hardware Logic Control M 60 Level-6
Electrical Machines M 60 Level-6
Pneumatics & Hydraulics M 90 Level-6
Machine Maintenance M 90 Level-6
Programmable Logic Controller M 90 Level-6
SCADA & HMI M 60 Level-6
TIA- Portal M 60 Level-6
Communication Skill M 30 Level-6
AUTOCAD Electrical M 90 Level-6
Basic Electronics M 90 Level-6
Total 780
Please attach any document giving further detail about the structure of the qualification – e.g. a
Curriculum Document or a Qualification Pack.
Give the titles and other relevant details of the document(s) here. Include page references
showing where to find the relevant information.
3
SECTION 1
ASSESSMENT
Body/Bodies which will carry out Assessment:

Examination Cell of Central Tool Room and Training Centre, Bhubaneswar
Will the Assessment Body be responsible for RPL Assessment?

Yes
How will RPL assessment be managed and who will carry it out?
Learners who have met the requirements of any Unit Standard that forms part of this
qualification may apply for recognition of prior learning to the relevant Education body. The
applicant must be assessed against the specific outcomes and with the assessment criteria
for the relevant Unit Standards.
Describe the overall assessment strategy and specific arrangements which have been put in
place to ensure that assessment is always valid, consistent and fair and show that these are
in line with the requirements of the NSQF.
1. ASSESSMENT GUIDELINE:
 Criteria for assessment based on each learning outcome, will be assigned marks
proportionately to its importance.
 The assessment for the theory & practical part is based on knowledge bank of
questions created by trainers and approved by Examination cell (CTTC, Bhubaneswar)
 For each Individual batch, Examination cell will create unique question papers for
theory part as well as practical for each examination.
 To pass the Qualification, every trainee should score a minimum of 70% cumulatively
(Theory and Practical)
 Assessment comprises the following components:
 Job carried out in labs/workshop
 Record book/ daily diary
 Answer sheet of assessment
 Viva –voce
 Progress chart
 Attendance and punctuality
4
2. ASSESSORS:
CTTC, Bhubaneswar faculty looking after the course “ADVANCED DIPLOMA IN MACHINE
MAINTENANCE AND AUTOMATION”, also assesses the students as per guidelines set by
Examination cell of CTTC, Bhubaneswar. Faculties have been trained from time to time to
upgrade their skills on various aspects such as conduct of assessments, teaching
methodology etc. These training are usually conducted at Xavier Institute of Management
(XIMB), Bhubaneswar, Xavier Labor Relations Institute (XLRI), Jamshedpur and other
renowned Institutions/Establishments of the country.
3. ELIGIBILITY TO APPEAR IN THE EXAM:

Minimum 80% attendance is compulsory for the students to appear for the assessments.
4. MARKING SCHEME:
Sr.No. Method of Assessments Weightage Evaluator
(Max. marks)
1 Written Test 20 Trainer + Course coordinator
2 Practical Test 40 + Examiner nominated by
3 Viva-voce 10 Examination Cell of CTTC,
4 Class/Workshop/Lab performance 10 Bhubaneswar
5 Project 20
TOTAL 100
5. PASSING MARKS:
Passing criteria is based on marks obtained in attendance record, term works, assignments,
practical performance, viva or oral exam, module test, practical exam and final exam.
Minimum Marks to pass practical exam – 60%

Minimum Marks to pass theory exam – 40%
6. RESULTS AND CERTIFICATION:

The assessment results are backed by evidences collected by assessors. Successful trainees
are awarded the certificates by CTTC, Bhubaneswar.
ASSESSMENT EVIDENCE:
Assessment evidence comprises the following components document in the form of records:
 1) Job carried out in labs/workshop
 2) Record book/ daily diary
 3) Answer sheet of assessment
 4) Viva –voce
 5) Progress chart
 6) Attendance and punctuality
5
Title of Component: Machine Operation
Outcome to be assessed Assessment criteria for the outcome

Understand safety precautions. Use PPE while working in the workshop.
Demonstrate machines.
Demonstrate on measuring Use Vernier- caliper, micrometer, height gauge and

instruments Lathe machine operation- other measuring instrument.
Working, mechanism, R.P.M.
calculation
Demonstrate the parts of lathe Identify all the parts and mechanism used in lathe.
machine and their function.
Demonstrate standard operating Use SOP for the manufacturing of parts.
procedure (SOP) for lathe.
Demonstrate operation on milling Identify the parts and its function of milling machine
machine. and follow the SOP for manufacturing.
Demonstrate operation on grinding Identify the parts and its function of grinding
machine. machine and follow the SOP for operation.
Demonstrate the de-burring process De-burr the work-piece after machining.
and its importance.
Means of assessment-1
Assessing the daily work schedule sheet.
Conducting written test after completion of this component
Conducting skill test after completion of this component.
Pass/Fail
Scoring more than 40% in written test and more than 60% in practical test will be declared as
competent.
Otherwise, he/she will be declared as not yet competent.
Title of Component: Electrical Hardware Logic Control

Demonstrate fundamental of Identify, dismantle, sketch & assemble different
electricity. electrical accessories.
Demonstrate measuring Use multi-meters for measurements of voltage, current
instrument for electrical &continuity.
parameters.
Demonstrate symbols of the Use Series and parallel circuit and Prepare small circuit.
electrical components like M.C.B.,
Starter, Fuse, and Bell etc.
6
Demonstrate types of domestic and Identify types of wiring, draw one line diagram using
industrial wiring & JIC symbol, IEC standard symbols and do the wiring.
symbol.
Demonstrate about types of Identify the types of switches and design control
electrical control switches. circuits for AC &DC loads.
Demonstrate different electro- Use relay, contactor &timer in various control logic.
mechanical switching components Do the connection of relay and contactors for motor
as: relay, contactor and timer. control logic as: start stop, forward reverse.
Demonstrate about different Identify and test the connecting terminals for input
sensors as: proximity inductive, &output signal of the sensors.
proximity capacitive, proximity
optical.
Conducting written test after completion of this component.
Conducting practical test after completion of study of all switches.
Pass/Fail
Scoring more than 40% in written test and more than 60% in practical (Model) test will be
declared as competent.
Title of Component: Electrical Machines

Demonstrate Magnetism and Install, test and run of an electric DC motors.
classification of magnets, care and
maintenance, methods of
magnetizing & magnetic materials.
Demonstrate electromagnetism, Install & test a DC Generator and
cork screw rule, right hand rules. M.G. set.
Faradays laws, Lenz’s law and
Principle and Application of D.C.
motor and generators.
Demonstrate Principle of Single Install and test an electric single phase AC motors and
phase and three phase motor and An electric 3 phase motor by a D.O.L. starter.
its application.
Demonstrate Principle of three Install and test an electric 3 phase motor by a Star and
phase motor and its application. Delta starter.
7
Demonstrate about Transformer, Do Short and open circuit test of 1 phase transformer.
use and application.
Demonstrate about star and delta Check transformer terminals &do Star and Delta
conversion of transformer. conversion of a 3 phase transformer.
Demonstrate Power measurement Do the Power measurement by two wattmeter method of
methods for Resistive load, three phase resistive load & inductive load.
Inductive load.
Demonstrate and describe the Install & do maintenance of electrical equipment.
procedure to install the electrical
equipment.
Conducting practical test for all machines mentioned above.
Pass/Fail
competent.
8
Title of Component: Hydraulic and pneumatics
Demonstrate Pneumatics, Make different control circuits by using Pneumatic

Basic controlling equipment and Control Valves and Components.
its use.
Demonstrate Pneumatics, Practice and prepare diagram to operate Double Acting
Basic controlling equipment and Cylinder using 4/2 Direction Control Valve in
its use. Pneumatics.
Demonstrate types of Pump , Draw different symbols of different valves and
Compressor and its related pneumatics components as:
equipment. Compressor and its related equipment.
Demonstration of Cylinder, Do Actuation of single acting cylinder by 3/2 D.C. valve.
valve and its type Electro Pneumatics.
Demonstrate Electro-Pneumatics, Prepare electro-pneumatic control circuit
Basic controlling equipment and Using solenoid actuated 5/2 DC valves.
its use.
Demonstration on Hydraulics, Use Hydraulic Control Valves and various Components
Purpose of fluids and Basic and Draw the Circuit diagram to operate Double Acting
controlling equipment used in Cylinder using 4/2 Direction Control Valve in Hydraulics
hydraulics.
Demonstrate and mark internal Do a Sequential Circuit with limited Clamping Pressure.
parts of a Power pack and its Do a Hydraulic circuit for Rapid traverse and Feed
related equipment. circuit.
Demonstrate about Cylinder, valve
and its type.
Demonstrate Quality Do Counter Balance circuit to operate load such that
requirements of oil. even if the pump is switched off load should not get
actuated.
Demonstrate Properties of fluid, Do a Hydraulic circuit for Clamping and Drilling
Pump and its type. operation by Sequence circuit.
Conducting practical test to connect physical field by the means of software.
Pass/Fail
competent.
9
Title of Component: Machine Maintenance
Outcome To Be Assessed Assessment criteria for the outcome

Demonstrate types and activities ofDo weekly, quarterly, monthly preventive and
plant maintenance and breakdown maintenance of lathe, milling and Grinding
Documentary report. machine.
Demonstrate about Planning Do Preventive and breakdown maintenance of other
System, spare part Inventory, conventional Machine.
quality requirement and awareness.
Demonstrate about maintaining Do Preventive and breakdown maintenance of
records and documents. Compressor and Diesel Generator.
Demonstrate to find Source, part Do Preventive and breakdown maintenance of other

inventory repairing, purchasing and workshop related machinery equipment
cause and factor analysis for all
machines.
Demonstrate Maintenance of Do the Procedure for finding Source, part inventory
different machine as: turning, repairing, purchasing and cause and factor analysis for
milling, and grinding, drilling, radial all machines. Do the Maintenance of different machine.
grinding of different manufacture
company.
Demonstration on machine codes, Demonstration on machine codes, panel board and axis
panel board and axis homing. homing.
Demonstrate on Objective of CNC Demonstrate on Objective of CNC machine, machine
machine, machine codes, panel codes, panel board and axis homing.
board and axis homing.
Demonstrate about different cycle Demonstrate about different cycle and their use.
and their use.
Conducting practical test to operate any machine maintenance.
Pass/Fail
Scoring more than 40% in written test and more than 60% in Practical test will be declared as
competent. Otherwise, he/she will be declared as not yet competent.
10
Title of Component: Programmable logic controller

Demonstration on industrial Identify of PLC Hardware and do
Automation, different PLC Practice to Communicate PLC with system.
controllers & their application area.
Demonstration on LAD, FBD, STL Do practice on Installation of PLC software.
programming language Logic Gates, Do Design and test LAD program using bit & block,
AND, OR, NANAD, NOR, XOR. Operand.
Demonstration on TIMER,
Do Practice of PLC logic by using timer, counter,
COUNTER, and COMPARATOR
comparator, move etc. in the lad/logic.
blocks, in software.
Demonstration analog and digital Do program and test outputs with different signal
signal I/O of PLC. modules.
Demonstration connection of I/O Do the connection of different sensors & actuators with
field devices in signal i/o of plc. signal modules.
Demonstration connection of
Do the connection of different remote I/O with PLC &
remote I/O PLC with server PLC
check the network faults.
using profibus cable.
Demonstration connection of Practice to Communicate PLC with Profinet system.
Ethernet PLC using Profinet system. Create program for multi-user.
Demonstration of fault monitoring
Check the indications & LAD for monitoring the faults.
In on line & offline mode of PLC.
Conducting practical test for PLC communication and Interfacing.
Pass/Fail
competent.
11
Title of Component: SCADA & HMI

Demonstration on supervisory Do the installation of SCADA software and driver tools.
control and data acquisition
system.
Demonstrate about different types Design different Types of SCADA projects.
of SCADA systems.
Demonstrate about graphic Practice the steps to creating new projects, copy of
designer, tag management, and project, activation & deactivation of project.
communication to PLC.
Use of Object Properties of Object Editing Of Static Properties Style, Flashing, and
Palette & Library. Display. Use of Standard Color Palette.
Practice on mimic logic boards with logics.

Demonstrate about Use of Object Create its process picture & simulate using mimic logic
Properties of Object Palette & boards.
Library.
Create process picture of a traffic control, bottle
Demonstrate about Integrate & filling, water level control conveyor control & Simulate
Configure Controls In Process using simulator.
Pictures?
Demonstrate about Creating an Alarm Logging, Principles of Massage System,
Alarm Logging screen of a process. Archiving Messages.
Archiving Messages. Display Display Message in Run Time, Creating an Online
Message In Run Time. Trend.
Design PC-Based HMI Interface different field devices

Demonstrate about Design PC- with SCADA system & monitoring process values.
Based HMI. Configuration of HMI.
Assessing the daily work schedule sheet
Conducting practical test to communicate PLC and Graphics and PLC Interfacing.
Pass/Fail
competent.
12
Title of Component: TIA- Portal

Demonstrate about Totally Do the installation of TIA-PORTAL software and driver
Integrated Automation. tools.
Do single user & multiuser project with TIA-Portal.
Demonstrate types of project
create with TIA PORTAL.
Demonstrate on hardware of TIA- Identify the hardware module of TIA-Portal and install to
portal as s7-1200 PLC’s. mounting rack.
Demonstrate of connection Do the connection of S7-1200 PLC with I/O field devices.
between hard ware module & I/O
field devices.
Demonstrate Connection of Do the Connection of profibus dp with remote PLC & HMI.
profibus dp with remote plc.
Demonstrate the Connection of Do the Connection of multiple users with multiple PLC
multiple users with multiple PLC using Ethernet communication network (LAN).
using Ethernet communication
network (LAN).
Conducting practical test by using modern software.
Pass/Fail
competent.
13
Title of Component: AUTO-CAD Electrical

Demonstration of AUTOCAD & co- Install AUTOCAD electrical for e-cad design.
ordinate system. Discuss Attribute,
scoot and move, Multiple wire bus
& edit component
Discussion about different types of Do practice of 2-d & 3-d drawing in cad software. Modify
commands and function keys. menu bar & draw menu bar, layer, text & dimensions.
Demonstrate of auto desk

electrical workspace awareness, tool Do the Reverse, flip, dash link components alignment
bars, tool pallets & insert like options in various projects.
component working with project
manager.
Demonstrate of different types of Identify Wire types, wire numbering, source &
Wire &ladders, trim, parent- child destination signal & mention it in the cad-design of
component discussion. panels.
Demonstrate of Schematic report Create Schematic report & insert plc module
& insert plc module.
Pass/Fail
Scoring more than 40% in written test will be declared as competent.
Title of Component: Basic Electronics

Demonstrate fundamental of Identify, sketch & assemble different electronic
electricity, electron theory, atom, components, accessories.
molecule, symbol of electronic
components.
Demonstrate diode and its Identify different diodes and draw its output
application. characteristic. Use rectifier to make circuit.
Demonstrate transistor and its Use transistor to make electronic circuits according to its
biasing biasing.
14
Demonstrate op-amp and its Use op-amp to design various electronic circuits, identify
application the pins of op-amp IC.
Demonstrate about Soldering Identify electronic components by visual appearance,
technique, active, Passive electronic code number and data reference.
components, measuring
instruments
Demonstrate the number system, Know the number system conversion and simplify
logic gates and K-Map expressions using K-Map.
Pass/Fail
competent.
Title of Component: Communication Skill

Demonstrate Communication Understand the Basics of Communication, Soft Skills, non-
Skills, use language as a tool of verbal communication – body language
communication
Demonstrate and improve the Read The Sounds of English – Vowels & Consonant. Word
participant’s English language Accent – Accent, Tone, Pitch
skills.
Demonstrate Personality Learn Presentation Skills, Newspaper reading, Body

Development Language – positive gestures, handshakes, eye contact,
smiles, styles of walking, hand movements, etc. Role
Plays and Situation Handling, Personal and Career
Development (Career Counseling)
Demonstrate Full Dress Rehearsal Learn to Present an effective cover letter,
resume/curriculum vitae, Group Discussion, Personal
Interview, Corporate Interface
Pass/Fail
Scoring more than 40% in written test will be declared as competent.
15
SECTION 2
Evidence of Level
Title/Name of the qualification/Component: Advanced Diploma in Machine Maintenance &
Automation Level-6
NSQF Outcomes of the How the job role relates to the NSQF
Domain Qualification/Component NSQF level descriptors Level
Process Advanced Diploma in Machine Job holder is expected to execute 6
Maintenance and Automation the study and analysis process
qualification identifies and required for various Electrical
exhibits wide range of well- Equipment, their working
developed skill set with clear principles in various type of load
knowledge required to study conditions which requires well
circuit diagram of Electrical developed knowledge in study
Equipment along with the and analysis under different
analyzing the fault of the conditions. The trainees also can
devices according to standard monitor the condition of
and non-standard requirements. electrical devices from a remote
Also the trainee is expected to location and solve the fault found
be well conversant with the if any which requires high depth
circuit design & implementation of skill in through this
automation of the industry. qualification. Hence the
qualification is kept at level 6 as
per the process is concerned.
Professional The curriculum of the Job holders needs to have in 6
Knowledge qualification Advanced Diploma depth knowledge and
in Machine Maintenance and understanding circuit design,
Automation covers wide range properties of individual
thorough understanding and elements/components, site
knowledge of different type of survey, Estimation and costing,
Electrical Equipment used in Indian Electricity Rules and
Industrial sectors, their working regulations etc. They also gain
principles, study of various adequate knowledge about the
components and sections automation process of industries
behaviour in different load through the theoretical input.
conditions and electrical supply Therefore this is pegged at level
input and output etc. along with 6.
inclusion of detailed study of
Circuit diagram
Advanced Diploma in Machine
Maintenance and Automation
qualification has thorough
knowledge of operations of
16
various modern measuring and

checking equipment and hand
tools to support the all these
activities.
Professional Advanced Diploma in Machine Job holder is engaged in tasks 6
Skill Maintenance and Automation such as studying, analyzing and
qualification have the ability to interpreting Circuit Drawing,
apply practical knowledge and Planning and executing the
understanding in interpreting maintenance work, using
the circuit diagram of the appropriate instruments within
equipment. the quality framework and norms.
These activities are variable in
Advanced Diploma in Machine nature due to the electricity
Maintenance and Automation supply conditions of the locality.
also have the ability to perform They will be accustomed to wide
various operations required for range of machine maintenance
analyzing and organizing the for any kind of fault like
maintenance works mechanical, electrical, Electronics
systematically. They should etc. These skills are at certain
have the capability to operate range of cognitive in Hence this is
machines to check the pegged at level 6.
functionality of the same after
maintenance work
Advanced Diploma in Machine

Maintenance and Automation
imparts detail in depth skill to
use different types of
instruments to maintain the
desired quality and durability.
Core Skill Advanced Diploma in Machine The job holder needs to have 6
Maintenance and Automation Generic Skills of writing, Oral and
curriculum is designed to have Communication Skills. Job holder
reasonable good numerical prepares Documents for
abilities, mathematical maintenance history and
calculations required for schedule requirements.
analyzing the diagram, Understand the maintenance
communication skills to receive, requirements/client requirement
provide, and transmit which requires reasonably good
information logically to the clarity in oral and the written
appropriate person or the group skills and while working on the
involved in the activities. content he needs to be aware of
the social, political and natural
17
Use of appropriate measuring environment.

techniques, units and number Also the job holder is competent
systems to express degree of enough to prepare the estimation
accuracy units and number and costing sheet by gathering
systems representing degree of analytical and logical data for the
accuracy. Should be able to successful maintenance
communicate to the appropriate execution. Therefore it is pegged
person in regards to health, at level 6.
safety, first aid etc.
Responsibility Check-up procedures to ensure Job holder is required to carry out 6
that maintenance objectives are functions such as circuit drawing
finished within specified time reading, operating electrical
frames are developed. measurement and checking
instruments, analyse the problem
Checkup procedures to ensure and find the solution to it within
that agreed ethical and legal specified requirement. In these
requirements are met are activities job holder is doing the
drawn. tasks independently and guiding
Advanced Diploma in Machine others as and when required.
Maintenance and Automation is He/she is responsible for his/her
responsible for own work and own learning and others learning
learning along with full during the execution of the task.
responsibility for other works Therefore it is pegged at level 6
and learning. The Job holder is
expected to have openness to
learning, ability to plan and
organize own work and identify
and solve problems in the
course of working with in the
team. Understanding the need
to take initiative and manage
him/herself and others and
work to improve efficiency and
effectiveness.
18
SECTION 3
Evidence of Need
What Evidence is there that the Qualification is needed:

 Decision of the management review meeting.
 Industry Requirements
What is the estimated uptake of this Qualification and what is the basis of this estimate?
 The estimated uptake of this qualification in the year of 2016-17 is 80.
 The basis of this estimation is the requirements of the industries and placement of
this qualification of last two years.
NO OF TRAINEES ADMITTED DURING

LAST 5 YEARS
No. of Trainees Admitted
800
524 583
600 413 454
400 209
200
0
2011-12 2012-13 2013-14 2014-15 2015-16
Year
NO OF TRAINEES
Trainees Trained/Trainees Opted for Placement/ Trainees placed in last five years.
NO OF TRAINEES PLACED DURING LAST 5 YEARS

160 145
140
120
120 110 108 110
No. of Trainees
100 86
75 69 75
80
58
60
40
20
0
2011-12 2012-13 2013-14 2014-15 2015-16
Year
OPTED PLACED
19
What steps were taken to ensure that the Qualification(s) does/do not duplicate already
existing or planned Qualifications in NSQF?
The qualification is originally designed by curriculum committee comprising the training

head, industrial expert, academic professional experts.
The work group under the guidance of curriculum development committee already
conducted desk search as well as refers the qualification packs for as a supporting document
for the mapping of curriculum.
As per the search it is found that, the advanced diploma course is not available for the skill
development of the candidates in Advanced Diploma in Machine Maintenance and
Automation Course of 6 month duration under the Capital Goods and Automotive Sector Skill
Council.
What arrangements are in the place to monitor and review the Qualification(s)?
What data will be used and at what point will the Qualification(s) be revised or updated?
 The curriculum committee meeting for review will be in the month of Jan 2018 which
comprising industrial expert, Training Head, Representative from existing employers.
 The data used for revision or update will be impact analysis (student and industries)
and new subject area opportunities, multiple entry and exits incorporated or RPL
strategy implementations.
 The curriculum review and updates, in consultation with industries and expert of
respective domain, NOS approved by NSDA will also be referred to from time to time.
SECTION 4
EVIDENCE OF RECOGNITION AND PROGRESSION
What steps have been taken in the design of this or other Qualifications to ensure that there
is a clear path to other Qualifications in this Sector?
While designing this qualification proper care is taken to linkup with the skill development in
the field of Electrical Engineering and other areas.
Qualifying trainee will obtain a CTTC, Bhubaneswar Certificate in ‘Advanced Diploma in

Machine Maintenance And Automation. After 2 year of experience give the opportunities to
the trainees to work as Maintenance Engineer as a career progression with this position and
experience of 3 years gives career scope of Service Engineer and 5 years’ experience leads to
Maintenance Supervisor. Also he/she can become an entrepreneur/consultant in this sector
after getting 3 year of experience. The below mention diagrams represent the vertical mobility
20
for the job holder as a job progression in Automobile/Manufacturing Sector.
VERTICAL PROGRESSION
Maintenance Manager
Engineer Maintenance
Service
Engineer
Technical
Assistant
HORIZONTAL PROGRESSION
Technical Maintenance Service

Assistant Assistant Assistant
SOME OF THE RECRUITERS FOR THE ADMMA TRAINEES
21
1 Greentin Solutions Pvt. Ltd, Rajiv Gandhi Infotech Park, Hinjewadi, Pune – 411057
2 Apollo Tyres Ltd,B-25, Sipcot Indl: Growth Centre, Oragadam, Sriperumbudur, Tamil
Nadu, India - 602105
3 Kohinoor Technical Institute. Sankar Cinema Road, Near ICICI Bank, Angul.
4 VE Commercial Vehicles Limited (A Volvo Group and Eicher Motors joint venture)|
78-86, Industrial Area No. III | A. B. Road | Dewas - 455001 | India |
5 Centum Electronics Limited, #44, K.H.B Industrial Area, Yelahanka, Bangalore - 560
106.
6 Innodust Techsolution Pvt. Ltd., Plot No-A/65 , Saheed Nagar, Bhubaneswar,

Odisha-751007
7 Planning Academy, Bhubaneswar,L3/122, Acharya Vihar, Bhubaneswar-13
8 Micromatic Machine Tools Pvt. Ltd., No. 240/241, 11th Main, 3rd Phase, Peenya
Industrial Area, Bangalore - 560 058
9 Sona BLW Precision Forgings Ltd., T-46, MIDC, Bhosari. Pune - 411026,
Maharashtra, INDIA
10 Parle Agro, I/4, Food Processing Park, Khurda Industrial Estate, Khurda. Odisha -
752055
11 ONergy Solar, Plot No-N4/6(Ground Floor), Swapneswar Temple road, IRC village,
Nayapalli, Bhubaneswar-751014, (In front of centre of diabetes & endocrinology.)
12 Genius Consultants Ltd, Synthesis Business Park Tower,1C, 1st Floor, CBD/1,Action
Area - II, New Town, Kolkata - 700157
13 Veezone Reach ,Plot No. 42, Anand Bhawan, 2nd Floor, Rasulgarh, Bhubaneswar -
751010
14 Fox Solutions , Mallick Commercial Complex,A-69 Kharavela Nagar Bhubaneswar-

751001 , India
15 M/s Corrosion Protection Pvt. Ltd, Plot No.103 & 105, Andeisahi, Bhairpur, Jagatpur,
Cuttack-754 021, Odisha, India.
16 Forth Right Services,118 Bharati Tower Forest Park, Bhubaneswar, Orissa
17 Corrtech Energy Limited, Hyderabad
18 Pirn Technologies I Level 2 I Oval Building I i-Labs Center I Plot No 18 I Madhapur I

Hyderabad I 500 081 I
19 VDEAL SYSTEM, Plot no.754/2, Jaydev Vihar, Near Pabitra Guest House,
22
Bhubaneswar, -751013
20 Group of Engineers services Pvt. Ltd,#418 | Manjeera Majestic | KPHB Phase I |

Hyderabad-72
23

14.Cttc Bhuvaneshwar Admma Qualfile

Uploaded by

Copyright:

Available Formats

14.Cttc Bhuvaneshwar Admma Qualfile

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

14.Cttc Bhuvaneshwar Admma Qualfile

Uploaded by

Copyright:

Available Formats

ADVANCED DIPLOMA IN MACHINE

MAINTENANCE AND AUTOMATION

Ministry of Micro, Small and Medium

CONTACT DETAILS OF THE AWARDING BODY FOR THE QUALIFICATION

Name and Contact Details of Individual dealing with submission:

List of documents submitted in support of the Qualification File:

Body/bodies which will award the Qualification:

Formal Structure of the Qualification:

Title of component Mandatory/ Estimated size

Body/Bodies which will carry out Assessment:

Will the Assessment Body be responsible for RPL Assessment?

3. ELIGIBILITY TO APPEAR IN THE EXAM:

Minimum Marks to pass practical exam – 60%

6. RESULTS AND CERTIFICATION:

Title of Component: Machine Operation

Outcome to be assessed Assessment criteria for the outcome

Demonstrate on measuring Use Vernier- caliper, micrometer, height gauge and

Title of Component: Electrical Hardware Logic Control

Outcome to be assessed Assessment criteria for the outcome

Title of Component: Electrical Machines

Outcome to be assessed Assessment criteria for the outcome

Title of Component: Hydraulic and pneumatics

Outcome to be assessed Assessment criteria for the outcome

Demonstrate Pneumatics, Make different control circuits by using Pneumatic

Title of Component: Machine Maintenance

Outcome To Be Assessed Assessment criteria for the outcome

Demonstrate to find Source, part Do Preventive and breakdown maintenance of other

Title of Component: Programmable logic controller

Outcome to be assessed Assessment criteria for the outcome

Title of Component: SCADA & HMI

Outcome to be assessed Assessment criteria for the outcome

Practice on mimic logic boards with logics.

Design PC-Based HMI Interface different field devices

Title of Component: TIA- Portal

Outcome to be assessed Assessment criteria for the outcome

Title of Component: AUTO-CAD Electrical

Outcome To Be Assessed Assessment criteria for the outcome

Demonstrate of auto desk

Title of Component: Basic Electronics

Outcome To Be Assessed Assessment criteria for the outcome

Title of Component: Communication Skill

Outcome to be assessed Assessment criteria for the outcome

Demonstrate Personality Learn Presentation Skills, Newspaper reading, Body

various modern measuring and

Advanced Diploma in Machine

Use of appropriate measuring environment.

What Evidence is there that the Qualification is needed:

NO OF TRAINEES ADMITTED DURING

NO OF TRAINEES PLACED DURING LAST 5 YEARS

The qualification is originally designed by curriculum committee comprising the training

Qualifying trainee will obtain a CTTC, Bhubaneswar Certificate in ‘Advanced Diploma in

for the job holder as a job progression in Automobile/Manufacturing Sector.

Technical Maintenance Service

SOME OF THE RECRUITERS FOR THE ADMMA TRAINEES

6 Innodust Techsolution Pvt. Ltd., Plot No-A/65 , Saheed Nagar, Bhubaneswar,

7 Planning Academy, Bhubaneswar,L3/122, Acharya Vihar, Bhubaneswar-13

14 Fox Solutions , Mallick Commercial Complex,A-69 Kharavela Nagar Bhubaneswar-

16 Forth Right Services,118 Bharati Tower Forest Park, Bhubaneswar, Orissa

17 Corrtech Energy Limited, Hyderabad