Scribd
Upload
71 views7 pages

Condition 1: Maximum Axial (Compression) Capacity: Input

The document provides calculations to determine the maximum axial and tension capacity of a hollow circular steel section. It first provides input parameters such as member properties, applied forces, and buckling lengths. It then calculates the section properties and determines the member is class 1. The maximum compression capacity is determined to be 3424.65 kN. Flexural and lateral buckling are also checked. The maximum tension capacity is then calculated as 275 kN. Combined bending and axial effects are checked against interaction equations. The member passes all checks for the given loading.

Uploaded by

Chuksbozment
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
71 views7 pages

Condition 1: Maximum Axial (Compression) Capacity: Input

The document provides calculations to determine the maximum axial and tension capacity of a hollow circular steel section. It first provides input parameters such as member properties, applied forces, and buckling lengths. It then calculates the section properties and determines the member is class 1. The maximum compression capacity is determined to be 3424.65 kN. Flexural and lateral buckling are also checked. The maximum tension capacity is then calculated as 275 kN. Combined bending and axial effects are checked against interaction equations. The member passes all checks for the given loading.

Uploaded by

Chuksbozment
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

CONDITION 1: MAXIMUM AXIAL (COMPRESSION) CAPACITY

Input

Section : 406.4x10.0 HF-CHS fy = 275 N/mm2.
NEd = 1402.86 kN. Compression
VyEd = 1.75 kN. Vertical shear
MyEd = 18.84 kN.m. Vertical moment
VzEd = 3.81 kN. Horizontal shear
MzEd = 3.33 kN.m. Horizontal moment
Lcr = 9.21 m. Flexural buckling length
Lcr,T = 6.00 m. Buckling length for torsional buckling
L = 9.21 m. for lateral-torsional buckling

Classification - Bending or compression Clause 5.5 and Table 5.2 (sheet 3 of 3)



2 = 0.855
= Class 1 d/t = 40.64

Properties

A = 124.5 cm2.
W pl,y = 1572 cm3. (6.13)
W pl,z = 1572 cm3. (6.13)

Shift in centroidal axis 6.2.2.5(4) and 6.2.9.3(2) Compression only


eNy = 0.0 mm.
eNz = 0.0 mm.

Compression

Nc,Rd = A fy/ = 3424.65 kN. (6.10)

NEd
 = 0.41 Pass (6.9)
Nc,Rd

Moment capacity - Y axis



My,Rd = W pl,y fy /  (6.13)

= 432.21 kN.m.
My,Ed
  = 0.04 Pass (6.12)
My,Rd

Plastic shear capacity - Y axis



Avy = 79.28 cm2 Clause 6.2.6(3)

Vc,y,Rd = Avy(fy/3)/ = 1258.74 kN. (6.18)

Vy,Ed
  = 0.00 Pass (6.17) < 0.5 Low shear
Vc,y,Rd
Bending and axial - Y axis 6.2.9.1(5)

MN,y,Rd = 345.78 kN.m. From first principals

My,Ed
  = 0.05 Pass
MN,y,Rd

Moment capacity - Z axis



Mz,Rd = W pl,z fy /  (6.13)

= 432.21 kN.m.
Mz,Ed
  = 0.01 Pass (6.12)
Mz,Rd

Plastic shear capacity - Z axis



Avz = 79.28 cm2 Clause 6.2.6(3)

Vc,z,Rd = Avz(fy/3)/ = 1258.74 kN. (6.18)

Vz,Ed
  = 0.00 Pass (6.17) < 0.5 Low shear
Vc,z,Rd

Bending and axial - Z axis 6.2.9.1(5)



MN,z,Rd = 345.78 kN.m. From first principals

Mz,Ed
  = 0.01 Pass
MN,z,Rd

Combined capacity 6.2.9.1(6) (6.41)



    2.00 2.00
 My,Ed Mz,Ed 18.84 3.33
  =  = 0.00 Pass
 MN,y,Rd MN,z,Rd 345.78 345.78

Flexural buckling 6.3.1.3



Ncr = 2 E.I/Lcr2 = 2 210 x 24480 x 104/ 92052 = 5986.99 kN.
_
  = (A.fy /Ncr) = ( 125 x 275 x 0.1 / 5986.99) = 0.76
_
From Figure 6.4 using: = 0.76 and buckling curve 'a' (see Table 6.2)
  = 0.820

Nb,Rd = A.fy/ = 0.820 x 125 x 275 x 0.1 / = 2807.18 kN. 


NEd
 = 0.50 Pass (6.46)
Nb,Rd

Lateral torsional buckling




Iy > Ix Lateral torsional buckling not critical

Combined bending and axial compression



NEd My,Ed + My,Ed Mz,Ed + Mz,Ed
 + kyy  + kyz < 1.00 (6.61)
y.Nrk /   LT.My.Rk /  Mz.Rk / 

NEd My,Ed + My,Ed Mz,Ed + Mz,Ed


 + kzy  + kzz < 1.00 (6.62)
z.Nrk /   LT.My.Rk /  Mz.Rk / 

Where:
NEd = 1402.86 kN.
My,Ed + NEd eNy = 18.84 + 1402.86 x 0.0000 = 18.84 kN.m.
Mz,Ed + NEd eNz = 3.33 + 1402.86 x 0.0000 = 3.33 kN.m.
NRk = A fy = 124.5 x 275 x 0.1 = 3424.65 kN.
My,Rk = W pl,y fy = 1572 x 275 x 0.001 = 432.21 kN.m.
Mz,Rk = W pl,z fy = 1572 x 275 x 0.001 = 432.21 kN.m.
y = 0.820 
 z = 0.820
 LT = 1.000
From Annex A Use Factors Kij button
kyy = 0.637
kyz = 0.297
kzy = 0.389
kzz = 0.489

1402.86 18.84 3.33


 + 0.64  + 0.30 = 0.53 Pass
0.82 x 3424.65 / 1.00 1.00 x 432.21 / 1.00 432.21 / 1.00

1402.86 18.84 3.33


 + 0.39  + 0.49 = 0.52 Pass
0.82 x 3424.65 / 1.00 1.00 x 432.21 / 1.00 432.21 / 1.00
CONDITION 2: MAXIMUM TENSION CAPACITY

Input

Section : 406.4x10.0 HF-CHS fy = 275 N/mm2.
NEd = -413.91 kN. Tension
VyEd = 127.87 kN. Vertical shear
MyEd = 59.32 kN.m. Vertical moment
VzEd = 26.73 kN. Horizontal shear
MzEd = 83.24 kN.m. Horizontal moment
Aholes = 0.00 cm2. Total area of holes to be deducted
L = 9.21 m. for lateral-torsional buckling

Classification - Bending or compression Clause 5.5 and Table 5.2 (sheet 3 of 3)



2 = 0.855
= Class 1 d/t = 40.64

Properties

W pl,y = 1572 cm3. (6.13)
W pl,z = 1572 cm3. (6.13)

Tension

Anet = A - Aholes = 124.53 cm2.

Nt,Rd is the smaller of:


Npl,Rd = A fy/ = 3424.65 kN. (6.6)
Nu,Rd = 0.9 Anet fu/ = 3676.21 kN. (6.7)

NEd
 = 0.12 Pass (6.5)
Nt,Rd

Moment capacity - Y axis



My,Rd = W pl,y fy /  (6.13)

= 432.21 kN.m.
My,Ed
  = 0.14 Pass (6.12)
My,Rd

Plastic shear capacity - Y axis



Avy = 79.28 cm2 Clause 6.2.6(3)

Vc,y,Rd = Avy(fy/3)/ = 1258.74 kN. (6.18)

Vy,Ed
  = 0.10 Pass (6.17) < 0.5 Low shear
Vc,y,Rd
Bending and axial - Y axis 6.2.9.1(5)

MN,y,Rd = 424.44 kN.m. From first principals

My,Ed
  = 0.14 Pass
MN,y,Rd

Moment capacity - Z axis



Mz,Rd = W pl,z fy /  (6.13)

= 432.21 kN.m.
Mz,Ed
  = 0.19 Pass (6.12)
Mz,Rd

Plastic shear capacity - Z axis



Avz = 79.28 cm2 Clause 6.2.6(3)

Vc,z,Rd = Avz(fy/3)/ = 1258.74 kN. (6.18)

Vz,Ed
  = 0.02 Pass (6.17) < 0.5 Low shear
Vc,z,Rd

Bending and axial - Z axis 6.2.9.1(5)



MN,z,Rd = 424.44 kN.m. From first principals

Mz,Ed
  = 0.20 Pass
MN,z,Rd

Combined capacity 6.2.9.1(6) (6.41)



    2.00 2.00
 My,Ed Mz,Ed 59.32 83.24
  =  = 0.06 Pass
 MN,y,Rd MN,z,Rd 424.44 424.44

Section is in tension

Lateral torsional buckling




Iy > Ix Lateral torsional buckling not critical

Combined bending and axial compression



NEd My,Ed + My,Ed Mz,Ed + Mz,Ed
 + kyy  + kyz < 1.00 (6.61)
y.Nrk /   LT.My.Rk /  Mz.Rk / 
NEd My,Ed + My,Ed Mz,Ed + Mz,Ed
 + kzy  + kzz < 1.00 (6.62)
z.Nrk /   LT.My.Rk /  Mz.Rk / 

Where:
NEd = 0.00 kN.
My,Ed + NEd eNy = 59.32 + 413.91 x 0.0000 = 59.32 kN.m.
Mz,Ed + NEd eNz = 83.24 + 413.91 x 0.0000 = 83.24 kN.m.
NRk = A fy = 124.5 x 275 x 0.1 = 3424.65 kN.
My,Rk = W pl,y fy = 1572 x 275 x 0.001 = 432.21 kN.m.
Mz,Rk = W pl,z fy = 1572 x 275 x 0.001 = 432.21 kN.m.
y = 0.820 
 z = 0.820
 LT = 1.000
From Annex A Use Factors Kij button
kyy = 0.678
kyz = 0.351
kzy = 0.407
kzz = 0.585

0.00 59.32 83.24


 + 0.68  + 0.35 = 0.16 Pass
0.82 x 3424.65 / 1.00 1.00 x 432.21 / 1.00 432.21 / 1.00

0.00 59.32 83.24


 + 0.41  + 0.59 = 0.17 Pass
0.82 x 3424.65 / 1.00 1.00 x 432.21 / 1.00 432.21 / 1.00

You might also like