Project Report on

GSM Signals Jammer

Department of Computer and Information
Technology Batch 2017
Project Advisor
Engr. Nabeela Maham
AIT
Submitted by
Twaha Shah GR-70
Farwa Bint-e-Abbas GR-29
M. Abeer Khan GR-09
Adeel Ahmed GR-12

DEPARTMENT OF COMPUTER AND INFORMATION TECHNOLOGY

Aligarh Institute of Technology University Road, Karachi – 75300
January 2019
1
 Department of Computer and Information
Technology Batch 2017
Aligarh Institute of Technology

Certificate
This is to be certified that Twaha Shah, Farwa Bint-e-Abbas, M. Abeer
Khan, and Adeel Ahmed students of 2nd year C.I.T of Computer and
Information Technology Department have completed their major project
entitled

GSM Signal Jammer

In the area of Microprocessor and Architecture under the guidance and

supervision provided at Aligarh Institute of Technology

Supervision :
Engr. Nabeela Maham Sir: Shahid Jamil
Junior Instructor ,C.I.T H.O.D , C.I.T

Signature Signature
2
 Abstract

This report presents the design, implementation, and testing of a cell-phone

jammer. This jammer works at GSM 900 and thus jams the all well-known
carriers in Pakistan (Mobilink, Warid-tel, UFone, Telenor, and Zong). The
designed jammer was successful in jamming the various carriers in India as will
be shown at the end of this report. Nowadays, mobile (or cell) phones are
becoming essential tools in our daily life. Here in Pakistan, for example, with a
rather low population (around 197 million), various cell phone carriers are
available. Needless to say, the wide use of mobile phones could create some
problems as the sound of ringing becomes annoying or disrupting. This could
happen in some places like conference rooms, law courts, libraries, lecture
rooms and mosques. One way to stop these disrupting ringing is to install a
device in such places which will inhibit the use of mobiles, i.e., make them
obsolete. Such a device is known as cell phone jammer or “GSM jammer”,
which is basically some kind of electronic countermeasure device. The
technology behind cell phone jamming is very simple. The jamming device
broadcasts an RF signal in the frequency range reserved for cell phones that
interferes with the cell phone signal, which results in a “no network available”
display on the cell phone screen.
However, recently, there has been an increasing demand for portable cell phone
jammers. In this project, a device that will jam GSM 900 services is designed,
built, and tested. 3
 Project Report

Introduction/Background
Jamming devices were first put into use by the military and armed forces’
technical department. This interest comes from the fundamental objective of
denying the successful transport of information from the sender (tactical
commanders) to the receiver (the army personnel), and vice-versa. That being
said, nowadays, mobile phones have become an essential tool in our daily life.
Here in Pakistan, for example, with a rather High population (around 197
million), a large number of mobile network carriers are available such as
Mobilink, Warid-tel, UFone, Telenor, and Zong etc, which operate at Gsm 900
frequency bands. Needless to say, the wide use of mobile phones could create
various problems, but the sound of a ringing phone becomes annoying at certain
times. This could happen in some in some really important public places
thereby putting you in the limelight.
Hence one simple way to stop this annoyance at some really important places is
to install a device in such places which will inhibit the use of mobiles, i.e., make
them obsolete. Such a device is known as cell phone signal jammer, which is
basically some kind of electronic countermeasure device. The technology
behind cell phone jamming is very simple. The jamming device broadcasts an
RF signal in the frequency range reserved for cell phones that interferes with the
cell phone signal, which results in a "no network available" display on the cell
phone screen. All phones within the effective radius of the jammer are silenced.
It should be mentioned that cell phone jammers are illegal devices in most
countries.
According to the Federal Communications Commission (FCC) in the USA:
"The manufacture, importation, sale, or offer for sale, of devices designed to
block or jam wireless transmissions is prohibited". However, recently, there has
been an increasing demand for portable cell phone jammers across the globe,
with that being said one should note that what we are presenting is totally with
respect to gaining knowledge and mainly for educational purposes only and that
there is no intention for us to manufacture or sell these devices in India, or
elsewhere. In this project, using the device causes extensive disruption and
4
involvement in mobile signal operation, by affecting coverage and a
degradation of service for customers. In some cases, mobile users may not be
aware of the blockade of its terminals as the above may not be evident until you
make a call, case in which receive a warning network is not available, seeing
thus affected their rights to access services, while not receive any
communication on their mobile until they depart from the affected area.
Considering the serious damage generated in the network and the allocation of
user rights, it is understood critical control and restrict the supply of these
teams, as well as limiting its sole use and exceptionally for public security cases
such as in prisons.
However, we believe that in this particular case, the real solution is that the
controls should be increased and that the prison authorities in each country take
necessary measures to prevent the introduction and use of cell phones in those
precincts measures. On the other hand, it has been an increasingly widespread
of these teams by private use, generating direct damage to mobile users and
companies have acquired and paid millions of dollars for the use, development
and exploitation a valuable and finite well as radio spectrum and network
deployment. It will also be important to establish in a timely manner far the
responsibility of dealer’s telecommunication solution for the damages to the
signal arrives.

Explanation
Hence one simple way to stop this annoyance at some really important places is
to install a device in such places which will inhibit the use of mobiles, i.e., make
them obsolete. Such a device is known as cell phone signal jammer, which is
basically some kind of electronic countermeasure device. The technology
behind cell phone jamming is very simple. The jamming device broadcasts an
RF signal in the frequency range reserved for cell phones that interferes with the
cell phone signal, which results in a "no network available" display on the cell
phone screen. All phones within the effective radius of the jammer are silenced.
It should be mentioned that cell phone jammers are illegal devices in most
countries.
5
Software Section
Visual Basic 6.0
MS Access

Hardware Section
HARDWARE:
 # NE555 Timer
 # BF495 Transistor
 # 2PF Ceramic Capacitor
 # 4.7PF Ceramic Capacitor
 # 3.3PF Ceramic Capacitor
 # 47PF Ceramic Capacitor
 # 30PF Variable / Trimmer Capacitor
 # 1uF 63V Electrolytic Capacitor
 # 10K Resistor
 # 6.8K Resistor
 # 82K Resistor
 # 220E Resistor
 # 5.6K Resistor
 # 24 AWG Copper Wire
 # 3 Pin Mini Slide Switch (SPDT)
 # 3mm LED (Green)
 # 2Pin Male Header Connector
 # 9V Battery Connector
 # 9V Battery
 #PCB
6
CIRCUIT DIAGRAM

Features /Application
Gas stations, the air entrainment station, the fuel depot and the flammable
Explosive chemical warehouse, the refinery, the petrified factory and so on
Need safely to protect place: May avoid changing suddenly the detonation
which the signal radioactive generation Static electricity spark but causes, the
fire. Posts the prohibition to dial the handset sign, does not have the initiative,
this kind of accident all has the appearance in national many gas stations, in
order to safeguard these important situations the security to be supposed to take
the precautionary measure.

2. Governments, enterprise's each kind of conference room: May avoid the

hand setting disturbs and answers when the telephone breaking the leader to
speak but interrupts its person to hold a meeting.

3. Armies, public security department's important conference rooms: Might

avoid the attending personnel divulging the military and the government using
the handset is secret, at present the new spy science and technology, already
used the handset interception, the monitor environment sound, therefore to
7
important conference place, it is necessary to take effective also of security the
initiative.

4. Hospitals: Might avoid the goon machine-hour but causing doctor to the
hospital precision instrument equipment disturbance to misdiagnose, has
delayed the rescue patient, as well as was surgery doctor to answer the handset
telephone disturbance attention, underwent the surgery to doctor to the patient
to be extremely disadvantageous.

5. Courts: May avoid the handset ting the disturbance, maintains the court
conference site the dignity and the sacredness.

6. Libraries, New Bookstore: May avoid the handset ting and answer the
telephone the noise, builds to study the study peaceful environment.
7. Theatres: As the upscale recreation area, eliminates the handset ting noise to
be possible to maintain the audience to appreciate the program the interest.

8. Tests places, examination centre: May cease the examinee, monitor an exam
the personnel to cheat using the modern communication facilities.

9. Schools classrooms and training organization classroom: May avoid the hand
Setting and answers when the handset telephone to attending class student's
Disturbance.

10. Instead fears the unit: Locking goal of tendency by handset telecontrolled
bomb.

11. Coast defences unit: May prevent the seacoast smuggling member discloses
secret information using the handset, effectively attacks smuggling criminal
offender's smuggling.

12. The jail, detains the place: Prevented the criminal, the news media, the visit
Personnel, the prison tube does not collude with according to the stipulation
inside and outside, forms conspires to get the story straight.

13. Temples, Mosques and Churches: May eliminate the handset signal noise,
by maintains the religious place solemn and respectful.
8
System Requirement

Hardware Requirements:
Processor : X86 Compatible processor with 1.7 GHz Clock speed
RAM : 512 MB or more
Hard disk : 20 GB or more
Monitor : VGA/SVGA

Software Requirements:
Operating System : Windows 2000/XP
Front end : Visual Basic 6.0
Back end : MS Access

9
Feedback Table

10