Scribd Logo
Upload

Welcome to Scribd!

  • 209 views

    HB-1921-1091289 PCard QIAprepSpinMini 0215 WW PDF

    Uploaded by

    Marco Meraz

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    HB-1921-1091289 PCard QIAprepSpinMini 0215 WW PDF

    Uploaded by

    Marco Meraz
    209 views2 pages

    Original Title

    HB-1921-1091289_PCard_QIAprepSpinMini_0215_WW.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    209 views2 pages

    HB-1921-1091289 PCard QIAprepSpinMini 0215 WW PDF

    Uploaded by

    Marco Meraz

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Quick-Start Protocol February 2015

    QIAprep® Spin Miniprep Kit


    The QIAprep Spin Miniprep Kit (cat. nos. 27104 and 27106) can be stored at room
    temperature (15–25°C) for up to 12 months.

    For more information, please refer to the most recent version of the QIAprep Miniprep
    Handbook, which can be found at: www.qiagen.com/handbooks.

    For technical assistance, please call toll-free 00800-22-44-6000, or find regional phone
    numbers at: www.qiagen.com/contact.

    Notes before starting


     Optional: Add LyseBlue reagent to Buffer P1 at a ratio of 1 to 1000.
     Add the provided RNase A solution to Buffer P1, mix and store at 2–8°C.
     Add ethanol (96–100%) to Buffer PE before use (see bottle label for volume).
     All centrifugation steps are carried out at 13,000 rpm (~17,900 x g) in a conventional
    table-top microcentrifuge.

    1. Pellet 1–5 ml bacterial overnight culture by centrifugation at >8000 rpm (6800 x g) for 3
    min at room temperature (15–25°C).
    2. Resuspend pelleted bacterial cells in 250 μl Buffer P1 and transfer to a microcentrifuge
    tube.
    3. Add 250 μl Buffer P2 and mix thoroughly by inverting the tube 4–6 times until the
    solution becomes clear. Do not allow the lysis reaction to proceed for
    more than 5 min. If using LyseBlue reagent, the solution will turn blue.

    Sample to Insight__
    4. Add 350 μl Buffer N3 and mix immediately and thoroughly by inverting the tube 4–6
    times. If using LyseBlue reagent, the solution will turn colorless.
    5. Centrifuge for 10 min at 13,000 rpm (~17,900 x g) in a table-top microcentrifuge.
    6. Apply 800 μl supernatant from step 5 to the QIAprep 2.0 spin column by pipetting. For
    centrifuge processing, follow the instructions marked with a triangle (). For vacuum
    manifold processing, follow the instructions marked with a circle ().  Centrifuge for
    30–60 s and discard the flow-through, or  apply vacuum to the manifold to draw the
    solution through the QIAprep 2.0 spin column and switch off the vacuum source.
    7. Recommended: Wash the QIAprep 2.0 spin column by adding 0.5 ml Buffer PB. 
    Centrifuge for 30–60 s and discard the flow-through, or  apply vacuum to the manifold
    to draw the solution through the QIAprep 2.0 spin column and switch off the vacuum
    source.
    Note: This step is only required when using endA+ strains or other bacteria strains with
    high nuclease activity or carbohydrate content.
    8. Wash the QIAprep 2.0 spin column by adding 0.75 ml Buffer PE.  Centrifuge for
    30–60 s and discard the flow-through, or  apply vacuum to the manifold to draw the
    solution through the QIAprep 2.0 spin column and switch off the vacuum source. Transfer
    the QIAprep 2.0 spin column to the collection tube.
    9. Centrifuge for 1 min to remove residual wash buffer.
    10. Place the QIAprep 2.0 column in a clean 1.5 ml microcentrifuge tube. To elute DNA,
    add 50 μl Buffer EB (10 mM TrisCl, pH 8.5) or water to the center of the QIAprep 2.0
    spin column, let stand for 1 min, and centrifuge for 1 min.
    11. If the extracted DNA is to be analyzed on a gel, add 1 volume of Loading Dye to 5
    volumes of purified DNA. Mix the solution by pipetting up and down before loading the
    gel.

    For up-to-date licensing information and product-specific disclaimers, see the respective QIAGEN kit handbook or user manual. Trademarks: QIAGEN®, QIAprep®
    (QIAGEN Group). 1091289 02/2015 HB-1921-001 © 2015 QIAGEN, all rights reserved.

    You might also like