Scribd
Upload
214 views3 pages

Pile Cap Design 1

The document provides design requirements and dimensions for a pile cap including allowable soil bearing stress, surcharge details, materials properties, column and pile dimensions. It then summarizes the design of the pile cap involving: 1) Checking the pile cap dimension and determining it fails the minimum D/C ratio requirement. 2) Analyzing the pile cap thickness for punching shear and beam shear about the x and z axes, finding it sufficient. 3) Designing the pile cap reinforcements for bending about the x and z axes, determining the required bar spacing and number of bars meets requirements.

Uploaded by

Yisrael Ashkenazim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
214 views3 pages

Pile Cap Design 1

The document provides design requirements and dimensions for a pile cap including allowable soil bearing stress, surcharge details, materials properties, column and pile dimensions. It then summarizes the design of the pile cap involving: 1) Checking the pile cap dimension and determining it fails the minimum D/C ratio requirement. 2) Analyzing the pile cap thickness for punching shear and beam shear about the x and z axes, finding it sufficient. 3) Designing the pile cap reinforcements for bending about the x and z axes, determining the required bar spacing and number of bars meets requirements.

Uploaded by

Yisrael Ashkenazim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

PILE CAP DESIGN

DESIGN REQUIREMENTS
Reactions Allowable soil bearing stress = 300 kPa
Py = 1,800 kN Height of surcharge = 0.3 m
3
Vx = 60 kN Unit weight of surcharge = 17.3 kN/m
Vz = 10 kN Bar diameter = 16 mm
Mx = 50 kN-m Materials:
Mz = 300 kN-m fc' = 21 MPa
fy = 414 MPa
Column Dimensions: m= 23.193
bx = 0.5 m
bz = 0.5 m
Pile Dimensions
bx = 0.35 m
bz = 0.35 m

I. PILE CAP Dimension


Bx = 2m D/C Ratio = 1.916 (Fail!!!)
Bz = 2m (Ok! Within the kern region)
T= 0.6 m D/C Ratio = 1.546 (Fail!!!)

P' = 1894.032 kN
Mx' = 56 kN-m
Mz' = 336 kN-m
2
∑z = ∑z2 = m2
fmax = 574.81 kPa
Pcomp = 675.61 kPa D/C Ratio = 1.175363 (Fail!!!)
fmin = 182.81 kPa
Pten = 283.61 kPa D/C Ratio = 1.551403 (Fail!!!)

II. PILE CAP THICKNESS


Pu' = 1894.032 kN
Mux' = 56 kN-m
Muz' = 336 kN-m

A: Punching shear
Effective depth, d = 501 mm 3 bo
bc = 1 1. Corner column 20 1.501
bo = 4.004 m 2. Edge column 30 2.502
as = 40 3. Interior column 40 4.004

Vc = 4596.333 kN Therefore, Vc = 3064.222 kN


Vc = 5366.214 kN fVc = 2604.588 kN
Vc = 3064.222 kN

Punching Shear, Vu = 1823.555 kN D/C Ratio = 0.700132

B: Beam shear
B.1 Bending about the x-axis
d= 501 mm
fmax = 515.508 kPa
y1 = 0.751 m
f1 = 505.05 kPa
Beam Shear, Vu = 730.1565 kN
fVc = 650.49662 kN D/C Ratio = 1.12246

B.2 Bending about the z-axis


d= 501 mm
fmax = 725.508 kPa
y1 = 0.751 m
f1 = 662.76 kPa
Beam Shear, Vu = 1005.939 kN
fVc = 650.49662 kN D/C Ratio = 1.546417

III. DESIGN OF REINFORCEMENTS


smax = 186.17 mm rmax = 0.016264
b1 = 0.85 rmin = 0.003382

A. Bending about the x-axis


d= 501 mm
fmax = 515.508 kPa
y2 = 0.25 m
f2 = 484.008 kPa
L= 0.75 m
Mu = 270.84375 kN-m
X= 0.001448
Req'd r = 0.0014732 Thickness is ok!
Use r = 0.0019642
Req'd s = 204.31456 mm
Use s = 186.17 mm D/C Ratio = 0.95
Use s = 170 mm
no. of bars = 12 pcs
B. Bending about the z-axis
d= 501 mm
fmax = 725.508 kPa
y2 = 0.25 m
f2 = 536.508 kPa
L= 0.75 m
Mu = 359.4375 kN-m
X= 0.0019217
Req'd r = 0.0019665 Thickness is ok!
Use r = 0.002622
Req'd s = 153.05927 mm
Use s = 153.06 mm D/C Ratio = 0.95
Use s = 140 mm
no. of bars = 15 pcs

You might also like