Software Up gradation
Process in DDB LCD / LED
through USB
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
DDB Software‘s (Brand,Chipset & Model wise)
DDB Software’s Structure
VIDEOCON SANSUI PHILLIPS
Chipset wise
7510 7512 7525
Panel size wise Panel size wise Panel size wise
LCD LED LCD LED 3D
32” 40” 32” 42” 32” 40” 32” 42” 42” 46” 58”
7510 Chipset Models 7512 Chipset Models 7525 Chipset Models
VAD32FF-VXA VJE42FH-V0A VAD32FF-KXA VJE42FH-K1A VJF42PA-XSA VJE42PH-XXA
VAF32FI-VXA VJE32FH-VXA VJA32FH-K0A VJF32FA-KXA VJF46PA-XSA VJH32PA-XSA
VAD40FF-VXA VJE42FH-VXA
VJE32FH-K0A VJF58PA-XSA VJH46PA-XSA
VJE32FH-V0A VJH32FA-VXA
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Purpose & Types of Software to be Uploaded in DDB
NANAD NAND is the Application Software which will be Loaded at Factory (Needs to be
Upload in the filed with respect to New updates)
NAND SW will Automatically update through OTA also
STB SW Functionality (STB /LCD OSD can be modified)
A3W_16_010F for 7510 Chassis,
A3W_12_128 for 7512 Chassis,
A3W_17_011B for 7525 Chassis
E2P is the Erasable Software which will be Loaded at Factory (Needs to be
E2P
Upload in the filed while replacing Panel & Chassis irrespective of Existing)
Version will be depends upon the Panel & Model (Ex:- 10.2 Version for 7510 Chassis)
All types of Panels have different E2P file for their design data
E2P file needs to be load in LCD / LED whenever we change the Main PCB and panel
E2P software file is used to change the design data of DVBS LCD / LED TV
Panel wise Design data information like White balance, Audio Video setting, panels
settings are stored in E2P Software file
E2P file can be loaded from USB drive through USB port on LCDs
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Process of Software Upgrading in DDB LCD/LED’s
E2P file needs to be load in LCD / LED whenever we change the Main PCB and panel
but before Loading E2P SW we need to check Application & Loader Software's are for Latest ,
If not then 1st Load Application & Loader Software's and then Upload E2P file (Refer given Chart)
1 2
If “Application SW” is Old Application Production E2P
then follow 2 Steps Software to be Software to be
Installed Installed
1
Production E2P
If “Application SW” is Latest then Directly Upgrade E2P SW Software to be
Installed
Please Refer in Below Chart
Chassis S/W Ver. Date
Old Before 30th Jun’12
Freeman 7510
New 30-Jun-12
Old Before 11th Jun’12
Freeman 7512
New 11-Jun-12
Old Before 26th Jul’12
Freeman 7525
New 26-Jul-12
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Chipset wise Latest Soft wares in DDB TV for Reference
7510 Videocon model matrix
Model No LED/LCD Cabinet Loader Application (Build date) Chassis SAP Code E2P Panels Dimming Control Speakers
1200052004 10_0 SAM HM02 DC Strata
VAD32FF-VXA LCD S12 1200054261 10_0 AUO VD DC Strata
1200056111 10_0 AUO V4 DC Strata
VAF32FI-VXA LCD MAG 1200056111 10_0 AUO V4 DC Strata
VAD40FF-VXA LCD S12 1200054673 10_4 HM01 -R DC Strata
A3W_16_010F_L1_S0
Ver 1.6 1200052003 10_0 AUO V8 PWM Old
VJE32FH-V0A LED CON1 (30-JUNE -2012)
1200052003 10_0 AUO V8 PWM New
VJE42FH-V0A LED CON1 1200055124 10_4 AUO V1 PWM New
VJE32FH-VXA LED CON1 1200051357 10_2 AUO V8 PWM Strata
VJE42FH-VXA LED CON1 1200054904 10_4 AUO V1 PWM Strata
VJH32FA-VXA LED MET-I 1200057074 10_7 LG SEM2 PWM Strata -MET
7512 Videocon model matrix
Model No LED/LCD Cabinet Loader Application (Build date) Chassis SAP Code E2P Panels Dimming Control Speakers
1200053243 10_0 SAM HM02 DC Strata
VAD32FF-KXA LCD S12 1200049948 10_1 AUO VD DC Strata
1200056110 10_1 AUO V4 DC Strata
VJA32FH-K0A LED CON1 1200053245 10_0 AUO V2 DC Old
A3W_12_0128
1_10 1200050538 10_1 AUO V8 DC Old
VJE32FH-K0A LED CON1 11June 2012
1200050538 10_1 AUO V8 DC New
1200049929 10_1 AUO HW8 V0 DC Old
VJE42FH-K1A LED CON1
1200049929 10_1 AUO HW8 V0 DC New
VJF32FA-KXA LED MET-C 1200046319 10_1 AUO V8 DC Strata
7525 Videocon model matrix
Model No LED/LCD Cabinet Loader Application (Build date) Chassis SAP Code E2P Panels Dimming Control Speakers
VJF42PA-XSA LED MET-C 1200056588 10_1 AUO HB01_V1 PWM
VJF46PA-XSA LED MET-C 1200056589 10_1 AUO HVD01.0 PWM
Current Ver 25 Sep
VJF58PA-XSA LED MET-C 1200056163 10_3 AUO HVDC01 PWM
0_5 Final Ver will be released Strata
VJE42PH-XXA LED CON1 by 15 Oct 1200056591 TBD AUO HB01_V1 PWM
VJH32PA-XSA LED MET-I 1200056589 TBD LG SEF2 PWM
VJH46PA-XSA LED MET-I 1200056589 TBD AUO HVD01.0 PWM
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Application (NAND) Software
Upgradation Process
In DDB TV
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Purpose of NAND (Application) Software in DDB-TV
NAND is the Application Software which will be Pre Loaded at Factory (Needs to be
Upload in the filed with respect to New updates)
NAND SW will Automatically update through OTA
STB / LCD OSD’s (On Screen Display’s) can be modified with this Software
a) Firmware Version :- A3W_16_010F for 7510 Chassis,
b) Firmware Version :- A3W_12_128 for 7512 Chassis,
c) Firmware Version :- A3W_17_011B for 7525 Chassis
Note :- Application / Loader will remain common for all models (Brand & Chipset wise)
Before Updating this Software we need to check Existing NAND Software in DDB TV
If it is with Latest Software as shown in the Chart then, not required to Install Application Software
Directly Upgrade Production E2P Software (Process is given in next Slides)
If the Software is Old Version then we need to Upgrade Application Software for New Version
Chassis S/W Ver. Date
Old Before 30th Jun’12
Freeman 7510
New 30-Jun-12
Old Before 11th Jun’12
Freeman 7512
New 11-Jun-12
Old Before 26th Jul’12
Freeman 7525
New 26-Jul-12
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
How to Identify NAND (Application) Software in DDB-TV
Press “QUICK C” Key (for 7510 &7512 Models) and “ATV Menu” Key
7510 & 7512 7525
(for 7525 Model)” Key on Remote
Select “Install” from Menu using Down Navigation Key
, it’s border will highlight in Yellow Color when selected
Press “OK” Key to enter into Install Menu
Select S/W Version Option Using Down Navigation Key
, it’s border will highlight in Yellow Color when selected
Press Press “TV
Press “OK” Key / Right Navigation Key to Check SW Version “Quick-C” Key Menu ” Key
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
How to Identify NAND (Application) Software in DDB-TV
Once the S/W (Software) Version Option is Selected 7510 & 7512 7525
Use Right Navigation Key / Press OK Key to check Existing SW Version
Existing Firmware Version, EEProm Version , Loader Version and Build
Date will be displayed
We need to check the Build date as per the Chart
If it is Latest Software then Not Required to Install Application Software
Press Right Press Right
Press Exit Key to Return Back to TV Screen.
Navigation Key Navigation Key
Note:- If the Existing SW is not Latest then Upgrade
Application Software as shown Process
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step1 :- Receive “DDB TV – Application & Loader SW” folder from Factory and Store in D/E Drive of PC/ Laptop
Step 2 :- Choose the folder with Respect to Brand of LCD/LED like Videocon, Sansui & Phillips
Step3 :- Select the Chipset Category of LCD/LED like 7510 Chassis , 7512 Chassis & 7525 Chassis
Step4 :- Copy Selected files in Pen drive (File Name should be as a Videocon & Factory)
(and Ensure Videocon Folder should Contains .sdl file)
Note :- Application /Loader will remain common for all models (Brand & Chipset wise)
Step 1 :- Select “DDB TV – Application & Loader SW” folder from the stored Location ( D / E Drive) and Open for Sub folders
Select DDB TV – Application &
Loader SW folder and Double click
for Sub folders
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 2 :- Select the Brand of the DDB LCD /LED (Videocon / Sansui / Phillips)
In which Software needs to be Updated
Brand Can be Identified with Front Brand Name
Select Brand (Videocon / Sansui /
Phillips) in the folder and Double
click for Sub folders
Step 3 :- Select the Chip Set of the DDB LCD /LED (7510 / 7512 / 7525)
in which Software needs to be Updated
Chip Set Can be Identified with Rear View Ports of the DDB LCD /LED or from the Nomenclature of Set
Select Chip set (7510 / 7512
/7525) in the folder and Double
click for Sub folders
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 4 :- Copy the Videocon folder and Factory Folder and Store to Pen Drive
Copy two folders
Step 5 :- Insert Pen drive in the Laptop / Computer CPU
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 6 :- Double Click on “My Computer” Icon on your Computer below Screen will be Displayed
Select Removable Device and Double Click on It (Like Pen Drive as shown in the Picture)
Videocon & Factory Folders are Copied in Pen drive (Videocon Folder will Contain .sdl file
Cross Check the Videocon Folder Should
Contain .sdl file
Note :- Please Ensure folder Name Should be “Videocon” & Factory
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 7:- Insert USB in the USB Slot of DDB TV for
Software Upgradation (Ensure DDB Should be “OFF”) Insert Power Plug in to Power Socket
Step 8 - Press the Power key of remote control and Once it is Releasing Stand by Mode Immediately
Press Navigation “UP” and Navigation ‘Down” 2 Times
During boot up first Red LED will glow and
then OFF after 3 to 4 Second.
Then Immediately Press the Remote Control
Sequence as
Press the Power key >> Navigation UP >>
Press “Power” Key Navigation Down >> Navigation Down
And It starts Down Loading Software
Automatically
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Automatically It Starts Upgrading Application Software Software Upgrade is Under Progress
It Indicates Fusing into Flash Ensure TV should not be Off It Showing Software Upgrade Successfully Completed
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 9 :- Once the Application Software Upgrade is Completed
It Showing Software Upgrade Successfully Completed
Press “Power Key” on Remote to Reboot the DDB TV
Press Power Key”
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Upgrader and Loader
Upgradation Process
In DDB TV
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 1:- Press the QUICK-C key of remote control Step 2:- Press Numeric Keys “8533” on remote control
Select Audio Option using Navigation Key USB Based Upgrade Menu will be displayed
Press
Press
“Quick C ” Key
“8533” Key
Step 3:- Selected “Upgrader” using Navigation Keys and Press Right Navigation Key or “OK” Key to Upgrade “Upgrader”.
Press Press
“Right” Key “Right” Key
Note : Please ensure Set should not be switched off during the process
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 4:- Selected “Loader” using Navigation Keys and Press Right Navigation Key or “OK” Key to Upgrade “Loader”.
Press Press
“Right” Key “Right” Key
Step 5:- Selected “Reboot the TV “ using Navigation Keys and Press Right Navigation Key or “OK” Key to Restart the DDB TV.
Press
“Right” Key
Note : Please ensure Set should not be switched off during the process
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Cross Check the Upgraded Application Software in DDB-TV
Press “QUICK C” Key (for 7510 &7512 Models) and “ATV Menu” Key
7510 & 7512 7525
(for 7525 Model)” Key on Remote
Select “Install” from Menu using Down Navigation Key
Press “OK” Key to enter into Install Menu
Select S/W Version Option Using Down Navigation Key
Press “OK” Key / Right Navigation Key to Check SW Version
Existing Firmware Version, EEProm Version , Loader Version and Build
Press Press “TV
Date will be displayed “Quick -C” Key Menu ” Key
We need to check the Build date as per the Chart >> Press Exit Key to Return Back to TV Screen
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Production E2P Software
Upgradation Process
In DDB TV
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step1 :- Receive “DDB E2P SW- All Models”folder from Factory and Store in D/E Drive of PC/ Laptop
Step2 :- Choose the folder with Respect to Brand of LCD/LED like Videocon, Sansui & Phillips
Step3 :- Select the Chipset Category of LCD/LED like 7510 Chassis , 7512 Chassis & 7525 Chassis
Step4 :- Select the Panel Size of LCD/LED like 32” , 42”, 46” & 58”
Step5 :- Select the Model of LCD/LED like VJF42PA-XSA, VJF46PA-XSA , etc….
Step6 :- Copy Selected file in Pen drive & Change the File Name as shown in the Process
(Ex:- “e2p_dump.bin” in USB Pen drive for the particular Panel)
Step 1 :- Select “DDB E2P SW for All Models” folder from the stored Location ( D / E Drive) and Open for Sub folders
Select DDB E2PSW for All Models
folder and Double click for Sub
folders
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 2 :- Select the Brand of the DDB LCD /LED (Videocon / Sansui / Phillips)
In which Software needs to be Updated
Brand Can be Identified with Front Brand Name
Select Brand (Videocon / Sansui /
Phillips) in the folder and Double
click for Sub folders
Step 3 :- Select the Chip Set of the DDB LCD /LED (7510 / 7512 / 7525)
in which Software needs to be Updated
Chip Set Can be Identified with Rear View Ports of the DDB LCD /LED or from the Nomenclature of Set
Select Chip set (7510 / 7512
/7525) in the folder and Double
click for Sub folders
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 4 :- Select the Model of the DDB LCD /LED (Videocon / Sansui / Phillips)
In which Software needs to be Updated
Model Can be Identified with the Sticker Pasted on the Back Cover of Set
Select Model of the DDB
(Videocon / Sansui / Phillips) in
the folder and Double click for
Sub folders
Step 5 :- This Folder Contains two .bin files
Now Select the Production E2P file and Copy to Pen Drive (Ex:- AUOHW07_V8_53_2_2_PRO_V10p4)
“PRO” Means Production E2P file
Select Production E2P file and Copy
to Pen drive
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 6 :- Copy the Production E2P file and Store to Pen Drive (Ex:- AUOHW07_V8_53_2_2_PRO_V10p4)
Copy PRO.e2p file
Step 7 :- Insert Pendrive in the Laptop / Computer CPU
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 8 :- Double Click on “My Computer” Icon on your Computer below Screen will be Displayed
Select Removable Device and Double Click on It (Like PenDrive as shown in the Picture)
Production E2P File is Copied in Pen drive
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 9 :- Select Stored file Right Click on the file to Rename
File Renamed as a e2p_dump (always this file Should be .bin format)
Note :- Please Ensure there Should not be any Other .bin files in the Pen drive
.bin file should be stored / pasted on the Prime Location, it should not be in Sub Folders in
the pen Drive
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 10 :- Cross Check the Renamed file is .bin / not
Select the Renamed file and Right Click on it
Select the Properties and Click on it as shown Below
Properties Shows the Type of File BIN File
Disconnect and Remove USB from Laptop /Computer CPU
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 11:- Insert USB in the USB Slot of DDB TV for
Software Upgradation (Ensure DDB Should be “OFF”) Switch ON the DDB TV
Step 12:- Press the QUICK-C key of remote control Step 13:- Press Numeric Keys “8532” on remote
Select Audio Option using Navigation Key control Factory Menu will be displayed
Press
“Quick C ” Key Press
“8532” Key
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 14:- Selected Setup in Service Menu (Factory Menu) using Navigation Keys
Use Right Navigation Key or “OK” Key to Enter in to the “Setup Sub Menu”
Ensure M_Mode Should be “ON” use Right / Left Navigation Keys to select M_ Mode ON /OFF
Select E2P Setting’s using Down Navigation Key
Press Press
“Right” Key “Right” Key
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 15:- Selected E2P Settings in Service Menu (Factory Menu) using Navigation Keys
Use Right Navigation Key or “OK” Key to Enter in to the “E2P Settings Sub Menu”
Select “Full Erase Option” Using Down Navigation Key
Press Use “Down
“Right” Key Navigation” Key
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 16:- Selected E2P Full Erase settings in Service Menu using Navigation Keys
Use Right Navigation Key or “OK” Key to Erase the Existing E2P Development Software
Once it is Erased POP UP will be Displayed as “E2P ERASE SUCCESS”
Press
“Right” Key
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 17:- Selected E2P Upgrade settings in Service Menu using Navigation Keys
Use Right Navigation Key or “OK” Key to Upgrade E2P Software
Once it is Upgraded POP UP will be Displayed as “E2P UPGRADE COMPLETED”
Use Up Press
Navigation” Key “Right” Key
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 18:- Once the E2P Upgrade is Completed
Press Exit Key on Remote to Main Screen from Service Menu
Switch OFF DDB TV Directly Remove Power Plug from mains Supply Board
Press Exit Key”
Key
Step 19:- Remove USB from the DDB TV USB Port
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 20:- Press Power Key on the Remote to Switch on the DDB TV 7510 & 7512 7525
Press Press “TV
Press Power Key” “Quick -C” Key Menu ” Key
Step 21 :- Press the QUICK-C key of remote control Step 22:- Press Numeric Keys “8532” on remote control
Select Audio Option using Navigation Key Factory Menu will be displayed
Press
“Quick C ” Key Press
“8532” Key
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 23:- Selected Setup in Service Menu (Factory Menu) using Navigation Keys
Use Right Navigation Key or “OK” Key to Enter in to the “Setup Sub Menu”
Select Shipping Option using Down Navigation Key
Select E2P Setting’s using Down Navigation Key
Press Press
“Right” Key “Right” Key
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Software Upgradation process for DDB-TV through USB
Step 24:- Selected Shipping Option in Service Menu (Factory Menu) using Navigation Keys
Use Right Navigation Key or “OK” Key for “Shipping (Set for Default Settings)”
Pop up will be Displayed “Set Default Successful”
Use Navigation
Keys
Note :- Once the Shipping is Completed Set will Reboot
and Automatically will go to Stand by Mode
Red will LED will glow in Stand by Mode
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Cross Check the Updated E2P Production Software
Step 25:- Press Power Key on the Remote to Switch on the DDB TV 7510 & 7512 7525
Press Press “TV
“Quick -C” Key Menu ” Key
Press Power Key”
Step 26:- Press the QUICK-C key of remote control Step 27:- Press Numeric Keys “8532” on remote
Select Audio Option using Navigation Key control Factory Menu will be displayed
Press
“Quick C ” Key Press
“8532” Key
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Cross Check the Updated E2P Production Software
Step 28:- Select “Secure Boot Status” Option in Service Menu (Factory Menu) using Navigation Keys
Use Right Navigation Key or “OK” Key to Enter in to the “Secure Boot Status”
Ensure E2P Key Status Should show ‘s as “Customer Key – 241”
(this means Production E2P is Upgraded Successfully)
Use Navigation”
Key’s
Note :- If Customer Key show’s as 199 then we have upgrade Production E2P Once again.
If Production E2P is Not Upgraded Properly then OTA software will not take Automatically .
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
Thank You
DIGITIZATION – CHANGE IS INEVITABLE, MOVE ON…..
