Scribd
Upload
102 views1 page

Catalog Encoder MILE

This document provides specifications for the maxon Encoder MILE 512-6400 CPT, a 2-channel encoder integrated into a motor. It has 512-6400 counts per turn, operates at speeds up to 5000 rpm (4650 rpm for the 6400 CPT model), and provides signals with a phase shift of 90° between channels and a state length of 90°±<45° per signal. Connection and wiring details are provided for integrating the encoder with a motor and reading out the signals with line receivers.

Uploaded by

Lucas Suplino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views1 page

Catalog Encoder MILE

This document provides specifications for the maxon Encoder MILE 512-6400 CPT, a 2-channel encoder integrated into a motor. It has 512-6400 counts per turn, operates at speeds up to 5000 rpm (4650 rpm for the 6400 CPT model), and provides signals with a phase shift of 90° between channels and a state length of 90°±<45° per signal. Connection and wiring details are provided for integrating the encoder with a motor and reading out the signals with line receivers.

Uploaded by

Lucas Suplino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Encoder MILE  512–6400 CPT, 2 Channels, with Line Driver RS 422

Integrated into motor


Cycle C = 360°e
Pulse P = 180°e

maxon sensor
Channel A

Phase shift
90°e

Channel B

s3 s4 s1 s2 s 1..4 = 90°e
∆ s < 45°e
M 1:3
Direction of rotation cw (definition cw p. 150)

Stock program Part Numbers


Standard program
Special program (on request)
453234 409996 453233 411964 453232 411965 453231 411966
Type
Counts per turn 512 800 1024 1600 2048 3200 4096 6400
Number of channels 2 2 2 2 2 2 2 2
Max. operating frequency (kHz) 500 500 500 500 500 500 500 500
Max. speed (rpm) 5000 5000 5000 5000 5000 5000 5000 4650

overall length overall length

maxon Modular System


+ Motor Page + Gearhead Page + Brake Page Overall length [mm] / • see Gearhead
EC 90 flat 305 29.2 29.2 29.2 29.2 29.2 29.2 29.2 29.2
EC 90 flat 305 GP 52, 4 - 30 Nm 355 • • • • • • • •

Technical Data Pin Allocation Connection example


Supply voltage VCC  5 V ± 10% Connection motor Connection Encoder Line receiver
Encoder, Line Driver, AM26C31QD

VCC
Output signal EIA Standard RS422 Pin 1 Hall sensor 1* Pin   1 N.C. Recommended IC's:
Pin 2 Hall sensor 2* Pin   2 VCC GND - MC 3486
driver used: AM26C31QD - SN 75175
Pin 3 VHall 4.5...18 VDC Pin   3 GND
State length sn (500 rpm) 90°e ± <45°e Pin 4 Motor winding 3 Pin   4 N.C. - AM 26 LS 32

Signal rise and fall times Pin 5 Hall sensor 3* Pin   5 Channel A Channel A
(typically, at CL = 120 pF, RL = 100 Ω) 20 ns Pin 6 GND Pin   6 Channel A R
Pin 7 Motor winding 1 Pin   7 Channel B Channel A
Operating temperature range  -40…+100 °C Pin 8 Motor winding 2 Pin   8 Channel B
Moment of inertia of code wheel ≤ 65 gcm2 Pin   9 Do not connect
Channel B
Output current per channel min. -20 mA, max. 20 mA *Internal pull-up (10 kW) on pin 3 Pin 10 Do not connect
(VHall) R
Wiring diagram for Hall sensors see p. 37
Channel B

Connector:
39-28-1083 Molex
DIN 41651/EN 60603-13
Additional information can be found
under ‘Downloads’ in the maxon online shop. Opt. terminal resistance R = typical 120 Ω

May 2016 edition / subject to change maxon sensor 381

You might also like