This document provides technical specifications for an N2XY power cable that is VDE approved and has a higher current carrying capacity. It includes details on the cable structure, materials used, properties, testing standards met, operating temperatures and voltages, applications, and available core sizes and part numbers.
This document provides technical specifications for an N2XY power cable that is VDE approved and has a higher current carrying capacity. It includes details on the cable structure, materials used, properties, testing standards met, operating temperatures and voltages, applications, and available core sizes and part numbers.
This document provides technical specifications for an N2XY power cable that is VDE approved and has a higher current carrying capacity. It includes details on the cable structure, materials used, properties, testing standards met, operating temperatures and voltages, applications, and available core sizes and part numbers.
This document provides technical specifications for an N2XY power cable that is VDE approved and has a higher current carrying capacity. It includes details on the cable structure, materials used, properties, testing standards met, operating temperatures and voltages, applications, and available core sizes and part numbers.
N2XY power cable, 0,6/1kV, VDE approved, higher current carrying capacity
Technical data Cable structure Properties
● Power and control cable to ● Bare copper-conductor, to ● The materials used in manufacture are DIN VDE 0276 part 603, DIN VDE 0295 cl.1 or cl.2, single-wire cadmium-free and contain no silicone HD 603 S1 and IEC 60502 or multi-wire, BS 6360 cl.1 or cl.2, and free from substances harmful to ● Temperature range IEC 60228 cl.1 or cl.2 the wetting properties of lacquers flexing -5°C to +50°C ● Core insulation of cross-linked Tests fixed installation -40°C to +70°C polyethylene (XLPE) ● self-extinguishing and flame retardant ● Permissible operating temperature compound type DIX3 acc. to DIN VDE 0482-332-1-2, at conductor +90°C to HD 603 S1 DIN EN 60332-1-2, IEC 60332-1 (equivalent ● Permissible short circuit temperature ● Core identification to DIN VDE 0472 part 804 Test method B) (short circuit duration max. 5 s) DIN VDE 0293-308, 0276 part 603 Highest permissible voltage +250°C ● Cores stranded in concentric layers ● Direct current systems 1,8 kV ● Nominal voltage U0/U 0,6/1 kV ● Outer sheath of PVC ● Alternating current systems ● Test voltage 4 kV compound type DMV6/DMP2 • Single-phase systems Max. permissible tensile stress to HD 603 S1 both outer conductors insulated 1,4 kV with cable grip at comductor ● Sheath colour black • Single-phase systems 50 N/mm² one outer conductor earthed 0,7 kV ● Minimum bending radius ● Three-phase systems 1,2 kV single-core 15x cable Ø multi-core 12x cable Ø Note ● re = round conductor, single-wire rm = round conductor, multi-wire sm = sectional conductor, multi-wire ● J-version = with GN-YE conductor O-version = without GN-YE conductor ● AWG sizes are approximate equivalent values. The actual cross-section is in mm².
Application Power distribution cables for use in underground, in water, outdoors, in concrete, indoors, in cable ducts, for power stations, industrial applications and switching systems, as well as in local networks if no mechanical damage is expected. Respecting the permissible operating temperature at the conductor of +90°C permits a higher current carrying capacity than PVC insulated power distribution cables. = The product is conformed with the EC Low-Voltage Directive 2006/95/EC.
No.cores x Outer Ø Cop. Weight J type AWG-No. O type AWG-No. cross-sec. app. mm weight app. kg / km Part no. Part no. mm² kg / km 1 x 16 re 11,5 154,0 242,0 32850 6 - 32862 6 - 1 x 25 rm 12,5 240,0 362,0 32851 4 - 32863 4 -
