Scribd Logo
Upload

Welcome to Scribd!

  • 177 views

    QAP Flexible Hose Template

    Uploaded by

    sjk_akol
    This document provides specifications for a turbo blower including: - General information such as customer, manufacturer, model number, quantity, and operating conditions including air flow rate, pressure, temperature, and ambient conditions. - Construction details for components like piping, impeller, shaft, bearings, and seals. - Performance metrics including rated power, power consumption, weight, dimensions, flow tolerance and noise level. - Motor specifications including type, starting method, speed, voltage, and insulation class. - Description of an inverter panel, PLC, enclosure material and painting, and included accessories. - Guarantee of ±5% maximum air flow tolerance under normal operating conditions.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    QAP Flexible Hose Template

    Uploaded by

    sjk_akol
    177 views2 pages
    This document provides specifications for a turbo blower including: - General information such as customer, manufacturer, model number, quantity, and operating conditions including air flow rate, pressure, temperature, and ambient conditions. - Construction details for components like piping, impeller, shaft, bearings, and seals. - Performance metrics including rated power, power consumption, weight, dimensions, flow tolerance and noise level. - Motor specifications including type, starting method, speed, voltage, and insulation class. - Description of an inverter panel, PLC, enclosure material and painting, and included accessories. - Guarantee of ±5% maximum air flow tolerance under normal operating conditions.

    Original Description:

    This document provide reference to QAP for a Metallic Flexible Hose.

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a turbo blower including: - General information such as customer, manufacturer, model number, quantity, and operating conditions including air flow rate, pressure, temperature, and ambient conditions. - Construction details for components like piping, impeller, shaft, bearings, and seals. - Performance metrics including rated power, power consumption, weight, dimensions, flow tolerance and noise level. - Motor specifications including type, starting method, speed, voltage, and insulation class. - Description of an inverter panel, PLC, enclosure material and painting, and included accessories. - Guarantee of ±5% maximum air flow tolerance under normal operating conditions.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    177 views2 pages

    QAP Flexible Hose Template

    Uploaded by

    sjk_akol
    This document provides specifications for a turbo blower including: - General information such as customer, manufacturer, model number, quantity, and operating conditions including air flow rate, pressure, temperature, and ambient conditions. - Construction details for components like piping, impeller, shaft, bearings, and seals. - Performance metrics including rated power, power consumption, weight, dimensions, flow tolerance and noise level. - Motor specifications including type, starting method, speed, voltage, and insulation class. - Description of an inverter panel, PLC, enclosure material and painting, and included accessories. - Guarantee of ±5% maximum air flow tolerance under normal operating conditions.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    Turbo blower datasheet

    General Information
    Customer : M/S GONDWANA ENGINEERS LTD. Manufacturer: TurboMax Co. Ltd.

    End User : Suplied by: SFC Environmental Technologies Pvt. Ltd.


    CIDCO OF MAHARSHTRA LIMITED
    Date: 11/11/2014 Revision No : R0

    MAX100-C060S1 (Separate Enclosure for


    Service: Air Model No: Blower and Control Panel)
    Description: Turbo blower Quantity: 3 Set
    Installation: Indoor
    Operating conditions

    Air Flow Rate: 3500 Nm3/hr Altitude: 9 meter from mean sea level
    Pressure - disacharge(guage): 0.62 kg/cm2 Electricity: 415V 50Hz 3ph
    Suction(Abs): 10332 mmAq Voltage Range: 415V +/- 10%
    Temp. at suction: Ambient Ambient Temperature : 10-450 C
    Specific weight at suction: 1.2 kg/m3 Design Ambient Temperature : 500 C
    Operation Method: Local / Remote
    Construction
    Description Specifications Bearing Type : Air Bearing
    Piping Dia(A) Rating Facing Lubricant: N/A
    Discharge 300 (12") ANSI150 Flange f Shaft Seal : Labyrinth
    Blow Of Valve 150 ANSI150 Flange f Suction Filter: Electrostatic type filter
    No. of
    Impeller Type stages
    Max. Speed Drive Type: Direct
    Centrifugal 1 31450 Direction of Rotation: CCW
    Performance
    Rated power of motor : 100 HP Noise (at 1 m from blower) : Less than 80db
    Power consumption at 100% Design Capacity : 76 kW Vibration : Under 1mm/sec.
    Weight of Blower: kg Balancing grade(impeller and Rotor): G2.5
    Diamentions: L mm X W mm X H mm Flow Tolerance : ± 5% of Maximum flow

    Motor
    Cooling: Air & Water (Radiator & Coolant Circulation
    Manufactured by : Turbomax Co. Ltd. System)
    Type: PMSM Phase: 3
    Starting Method: Soft starting via Inverter Voltage: 415V
    Rated Speed: RPM Insulation class: H
    Inverter Panel Cooling
    Qty : 1 No per Unit
    Radiator and Coolant Circulation System
    Description: Inverter Panel Location Inside A.C Room
    PLC
    Micrologix 1400 (Allen Bradely) with Qty : 1 Set / blower
    Description: Conformal Coating
    Enclosure
    SS400 / 2.3 mm thick Painting: Munsell #0.9GY8.2/0.5, Ivory
    Material of
    Construction:
    Material
    Casting AC4C Impeller AL7075 Shaf Ti Alloy Bearing Inconel
    ACCESSORIES
    ✘ Check Valve ✘ Expansion Joint ✘ Discharge Silencer ✘ Bellow
    GUARANTEE
    Flow Tolerance : ±5% of Maximum Air Flow at Normal
    QUALITY ASSURANCE PLAN FOR FLEXIBLE HOSE
    PROJECT : QAP NO :

    CLIENT/END USER : REV :0


    CONTRACTOR : DATE :
    CONSULTANT : PAGE : 1 of 1

    SUPPLIER :
    THIRD PARTY
    INSPECTION AGENCY :
    (TPIA) :
    ITEM : Stainless Steel 304 Flexible Hose – Fixed Flanged End Connection Both Sides
    MFGR. NAME &
    :
    LOCATION
    QTY : 56 Nos.
    SL. COMPONENT CHARACTERISTICS TYPE OF QUANTUM REFERENCE ACCEPTANCE FORMAT INSPECTION REMARKS
    No. AND CHECK OF DOCUMENTS NORMS OF MFGR SFC TPIA
    OPERATION CHECK RECORD

    A
    MATERIALS

    Flanges SS 304 100% ASTM A182 F304 MTC P R R


    Documentry
    Inside corrugation SS 304 100% ASTM A240 TP304 MTC P R R
    Evidence
    Single Wire Braiding SS 304 100% ASTM A240 TP304 MTC P R R
    B
    VISUAL CHECK Flexible Hose Data sheet
    and GA
    General Checks Overall Dimensions Measurement Random (+/- 5 mm) TPIR P R W

    Flange Dimensions Measurement Random ANSI B 16.5 TPIR P R W


    Hydro test 100% TPIR P R W
    Documentry Flexible Hose Data
    Performance Checks PMI testing Random TPIR P R W
    Evidence sheet and GA
    Die penetration Test Random TPIR P R W
    DOCUMENT REVIEW & ISSUE
    C - - - - - - - H P
    OF INSPN REPORT

    LEGEND: REMARKS:
    P = Perform H = Hold Point MFGR = Manufacturer 1) Manufacturing strictly as per approved drawing.
    R = Review V=Verification IR = Inspection Report 2) Final inspection and document review by Client
    W = Witness TP IR: THIRD PARTY INSPECTION REPORT
    Prepared by Supplier TPIA / CONSULTANT

    ** Manufacturer Name ** **Purchaser Name ** ** End User/ Client/ TPI Name **

    Page 2 of 2

    You might also like