Scribd
Upload
89 views6 pages

Trafo HVOC Testing Protocol

This document summarizes the inspection and testing of an HV overcurrent and earth fault relay of Transformer-1 at a substation. It provides details of [1] checks performed on the relay itself, [2] measurement checks by injecting currents at different levels, [3] pick up and time tests for overcurrent and earth fault protections, and [4] equipment used for testing with its specifications. The tests were conducted to verify correct functioning of the relay's protection features.

Uploaded by

Yahya Dar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
89 views6 pages

Trafo HVOC Testing Protocol

This document summarizes the inspection and testing of an HV overcurrent and earth fault relay of Transformer-1 at a substation. It provides details of [1] checks performed on the relay itself, [2] measurement checks by injecting currents at different levels, [3] pick up and time tests for overcurrent and earth fault protections, and [4] equipment used for testing with its specifications. The tests were conducted to verify correct functioning of the relay's protection features.

Uploaded by

Yahya Dar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Project No.: RIT No.

:
Project Name:
Document Description:
Location: Substation
Equipment Description: HV Over Current & Earth Fault Relay of Transformer - 1

INSPECTION [ √ ] TEST [ √ ] DATE:


QIP Item
Description of Inspection / Test Activities Ref. Doc. No.
No.

(viii) Testing of Over Current Protection Relay Testing

Document1 Page 1 of 6
General Data:

Line/Feeder Power Transformer T-1 Serial Number

Relay Type HV Over Current & Earth Relay Model/Make


Fault

CT Ratio System Voltage

Relay Checks:

Items Status
Visual Inspection
Relay Damaged
Rating Information
Case Earth Installed
Test Block connection checked

Relay Energized

Relay Auxiliary Supply

Relay Healthy LED Working

Alarm LED Working

Trip LED Working

Measurement Checks
Input CT Ratio Injected Current (A) Calculated Current (A) Measured Current (A)

Document1 Page 2 of 6
B

Over Current (Low Set) I >


Curve: IEC S Inverse

Pick Up Test

Phase Set Pick Up Current (A) Observed Pick Up (A) Drop Off Current (A)

AB

BC

CA

ABC

Trip Time Test (2X)


TMS =

Phase Injected Current (A) Calculated Time (Sec) Observed Time (Sec)

AB

BC

CA

ABC

Document1 Page 3 of 6
Over Current (High Set) I >>
Curve Type: Instantaneous Trip

Trip Time Test (x1.2)

Phase Set Pick Up Current (A) Injected Current (A) Set Trip Time Observed Time (Sec)
AB

BC

CA

ABC

Earth Fault (Low Set) Ie >


Curve: IEC S Inverse

Pick Up Test
Phase Set Pick Up Current (A) Observed Pick Up (A) Drop Off Current (A)

Trip Time Test (X2)


TMS =

Phase Injected Current (A) Calculated Time (Sec) Observed Time (Sec)

Document1 Page 4 of 6
A

Earth Fault (High Set) Ie >>


Curve Type: Instantaneous trip

Trip Time Test (x1.25)

Phase Set Pick Up Current (A) Injected Current (A) Set Trip Time Observed Time (Sec)

Testing Equipment Data:


Name of Equipment:

Model/ Type:

Manufacturer:

Serial No:

Calibration Expiry Date:

Document1 Page 5 of 6
Document1 Page 6 of 6

You might also like