Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    EN Standard Welding Parameters

    Uploaded by

    alouis
    This Procedure Qualification Record documents the welding of a 12mm thick steel plate using E8016G filler metal and the shielded metal arc welding process in the 2G position. The welder used heat inputs between 0.56 and 1.91 kJ/mm across 11 passes with current between 126-129 amps and voltages of 23-25 volts at travel speeds of 78-263 mm/min. All parameters were within the standard welding procedure specification requirements.

    Copyright:

    © All Rights Reserved

    EN Standard Welding Parameters

    Uploaded by

    alouis
    46 views1 page
    This Procedure Qualification Record documents the welding of a 12mm thick steel plate using E8016G filler metal and the shielded metal arc welding process in the 2G position. The welder used heat inputs between 0.56 and 1.91 kJ/mm across 11 passes with current between 126-129 amps and voltages of 23-25 volts at travel speeds of 78-263 mm/min. All parameters were within the standard welding procedure specification requirements.

    Original Description:

    EN standard

    Original Title

    EN standard welding parameters

    Copyright

    © © All Rights Reserved

    Did you find this document useful?

    Is this content inappropriate?

    This Procedure Qualification Record documents the welding of a 12mm thick steel plate using E8016G filler metal and the shielded metal arc welding process in the 2G position. The welder used heat inputs between 0.56 and 1.91 kJ/mm across 11 passes with current between 126-129 amps and voltages of 23-25 volts at travel speeds of 78-263 mm/min. All parameters were within the standard welding procedure specification requirements.

    Copyright:

    © All Rights Reserved
    46 views1 page

    EN Standard Welding Parameters

    Uploaded by

    alouis
    This Procedure Qualification Record documents the welding of a 12mm thick steel plate using E8016G filler metal and the shielded metal arc welding process in the 2G position. The welder used heat inputs between 0.56 and 1.91 kJ/mm across 11 passes with current between 126-129 amps and voltages of 23-25 volts at travel speeds of 78-263 mm/min. All parameters were within the standard welding procedure specification requirements.

    Copyright:

    © All Rights Reserved
    of 1

    PROCEDURE QUALIFICATION RECORD (PQR)

    Pwps NO.: MM/S460/SV-B/001/2G

    Pre Heat temperature: Ambient Filler metal Designation and trade: E8016G
    Welder Name:HOSSAIN MD MAKBUL
    Welder IC No.: Lot No.:
    Date: 15.03.19
    Material : EN10025 S460M Thk: 12mm Length(mm) 350
    Welding position - 2G

    WELD DETAILS

    Heat Input: UxI U = Arc voltage


    x 0.001 xK
    (KJ/mm) Travel Speed (mm/s) I= Arc welding current

    Dia Travel Speed Heat Input (KJ/


    S.No. Pass Process Electrode Class Current (Amp) Voltage (Volts)
    (mm) (mm/min) mm)
    1 Root 111 E 8016 G 3.2 129 24 78 1.91
    2 Fill 111 E 8016 G 3.2 129 24 128 1.16
    3 Fill 111 E 8016 G 3.2 128 25 116 1.32
    4 Fill 111 E 8016 G 3.2 127 23 150 0.93
    5 Fill 111 E 8016 G 3.2 128 25 94 1.64
    6 Fill 111 E 8016 G 3.2 128 24 263 0.56
    7 Fill 111 E 8016 G 3.2 129 24 221 0.67
    8 Cap 111 E 8016 G 3.2 126 24 228 0.64
    9 Cap 111 E 8016 G 3.2 126 23 233 0.60
    10 Cap 111 E 8016 G 3.2 126 25 210 0.72
    11 Cap 111 E 8016 G 3.2 127 24 223 0.65

    A.Louis

    You might also like