Catalogus 2010 ENGELS

built stronger to last longer
catalogue 2010
Company profile 21-05-2010
Brouwers is a leading Dutch designer and manufacturer of high-quality

livestock housing systems, which are widely used in all stock farming sec-
tors. Its structural innovation has resulted in a large number of patented
products with unique characteristics.
Experience
Brouwers Equipment was founded in 1919 and has quickly developed
into the specialist in equipment for housing livestock. Brouwers is working
cooperatively with stock breeders, researchers, governmental agencies
and scientific centres. Through the company’s longstanding commitment
to the sector and its excellend record in product development, Brouwers is
het complete outfitter for the forward-looking stockbreeder.
Research and Development

Brouwers allocates a substantial part of its budget to Research and
Development. New designs are thorougly put to the test at pilot farms.
Independant researchers are called on to perfect designs. In all this the
user of our products is always essential.
Critical stock farmers

In addition to breeding the most awarded cattle in the world, the Dutch
have built up a reputation for excellence in the field of innovation in stock
breeding and the resultant introduction of new products and techniques.
A measure of the company’s product quality are the orders received from
Dutch farmers who settled abroad.
Growing share in the world market

Brouwers operates on the basis of an extensive dealer network. Maxi-
mum service and good advise are key words in our vocabulary. For effici-
ency reasons, products are manufactured in series. Deliveries are usually
made from stock, so that our customers can be served fast.
Sales Department
We are open from Monday through Friday from 8.00 - 12.00 h and 12.30 -
16.30 h. You are always welcome for a visit to our company. Also outside
office hours we will be glad of service to you.
Sales Department External Area Sales Managers Direct dial no.

North-West Netherlands Klaes Gerbrandy 0031-651-349729
North-East Netherlands Ap van der Bas 0031-651-349732
South Netherlands Robert Couperus 0031-651-852021
Germany Jan Roost 0049-1608-459684
Denmark, Norway, Sweden, Marcel Groot Boerle 0045-218-25189
Finland 0031-646-721231
Sales Department Internal Project Managers
Netherlands Jan Steensma 0031-58-2911120
Netherlands Edwin Pot 0031-58-2911160
Germany, other countries Frans Nauta 0031-58-2911150
Parts Netherlands, export Cor de Vries 0031-58-2911161
Frans Nauta, Edwin Pot, Cor de Vries, Jan Steensma
Klaes Gerbrandy Ap van der Bas Robert Couperus Marcel Groot Boerle Jan Roost
2 Tel. 0031-58-2911129
01-05-2010
Preface
Growing bigger
Scaling-up and cost price reduction
are the important issues on today’s
agenda. Because the milk price is
under pressure, something has to
be done. Companies become more
professional, production means are
being used increasingly intensive
and redundant luxury is dropped.
In this respect it is very important

to make the right decisions as
investments are being made for
the long term. Production means
should therefore be designed for
long-lasting and intensive use, in
the course of which a good bargain
could soon become a pickpurse.
This is no different for livestock

equipment. Large buildings, in
which the cows stay year-round,
demand a lot from the inventory. In
this respect quality will pay off and
be translated to “no more looking
after”.
That is why Brouwers Equipment

delivers livestock equipment of
the highest quality standard, so
you don’t have to worry about that
anymore!
Address
Brouwers Equipment B.V.
Address : Vestaweg 5, 8938 AV Leeuwarden, Holland
Mail : Postbus 203, 8901 BA Leeuwarden, Holland
Tel. : +31 (0)58 - 2911129
Fax : +31 (0)58 - 2911100
Internet : www.brouwersequipment.com
E-mail : [email protected]
Postbank : 83.20.02
ING bank : 67.02.22.305
IBAN : NL48INGB0670222305
BIC : INGBNL2A
VAT nr. : NL810809400B01

CoC nr. : 01046043
www.brouwersequipment.com 3
Index 01-05-2010
Cantilever model-R cubicles ��5

Space Tube ��6
R-flex ��6
Brisket concrete cubicle concept ��7
Model-R cubicle partitions ��8
Cantilever cubicle partitions ��9
Accessories for cubicle partitions ��10
Tube clamps ��12
Cubicle floor covering ��14
Locks® feed barriers ��16
Classic Locks ��18
Feed barriers for young stock ��19
Swedisch feed barriers ��20
Diagonal bar feed barriers ��21
Feed barriers for fattening stock ��22
Accessories for feed barriers ��23
Grouping area barriers ��23
Housing systems for horses ��26
Calf pens ��27
Partitions for tying stalls ��28
Suspended chains and nylon ties ��29
Water troughs ��30
Spare parts for drinking bowls ��32
Drinking bowls ��33
Grid scraper system ��34
Folding scrapers ��36
Rubber flooring for walking alleys ��38
Auger mixers ��39
Submersible agitators ��40
Vertical pumps ��42
Lobe rotor pumps ��43
Electric pumps ��44
Biogas installations ��45
Fastening items ��46
E-brush® ��47
Cattle crush ��47
Livestock care ��48
E-fan ��50
Ventilation ��51
The cantilever model-R cubicle partitions for large stock are made from 2”
tubing (ø 60,3 mm, wall thickness 3,65 mm). The large head opening from
The information in this catalogue is only a the bedding allows the animals to stand up a great deal easier. The shape
of the partition provides support and guidance to the animals allowing
picture at a given moment in time. As we are them to lie straight in the cubicles. This in turn makes for cleaner cubicles.
continuously busy with new developments, you
can find the complete catalogue digitally on our New!
website www.brouwersequipment.com. We keep The cubicle partitions for large stock are higher, which gives your dairy
cows even more space.
this digital catalogue up-to-date, so you can
always check this site for the correct and latest The advantages in a row
information. Large head opening. The cows stand up easily. Excellent guidance. The
animals lie straight in the cubicle. Hygienic. Very comfortable. Extra heavy
tubing. Hot-dip galvanised.
Terms of delivery and payment

Wilaard conditions Deliveries
All our offers, all orders to us and all contracts entered into with us are The cost of freight to foreign countries depend on the invoice value and
subject to the Wilaard terms and conditions. We also declare the law dstination. A survey can be sent on demand.
of the Netherlands to be applicable. The Wilaard terms and conditions
contain an arbitration clause and a limitation of liability. The terms and Payment
conditions are on file with the Chamber of Commerce in Leeuwarden, 14 days from date of invoice. Unknown clients on submission of referen-
under number 01067746. A copy is available free of charge on request. ces or collect on delivery.
General
All rights reserved. No part of this publication may be reproduced. Exclusi-
vely current and new materials may, subject to our explicit permission, be
returned free of charge; handling costs will be charged. Complaints about
goods deliverd must be submitted within 14 days from date of invoice.
Prices
Exclusive of VAT. Prices, as well as designs are subject to alteration
without notice.
4 Tel. 0031-58-2911129
01-05-2010
Cantilever model-R cubicle partitions
B C
Requirements model-R cubicle partitons

> 18 months Model Number
E Single row 5510-8535-016 1 per stand
5510-8549-004 1 per 2 stands and 1 per row
F
5510-8567-002 1 per support post
5510-1250-000 1 per partition
Measurements cantilever model-R cubicle partitions
5510-8535-019 5510-8535-016 5510-8535-000 5510-6040-001 2,2 - 2,4 m per stand
A 120 cm 120 cm 100 cm 5510-8511-003 1,1 - 1,2 m per stand
B 200 cm 190 cm 170 cm Double row 5510-8535-016 1 per stand
C 25 cm 25 cm 20 cm 5510-8549-004 1 per 4 stands and 1 per row
D 50 - 60 cm 50 - 60 cm 45 cm 5510-1966-001 1 per 2 partitions
E 221 cm 211 cm 186 cm 5510-1252-000 1 per 2 partitions
F 230-240 cm 220-230 cm 200 cm 5510-9629-006 1 per support post
5510-6040-001 2,2 - 2,4 m per stand
5510-8511-003 1,1 - 1,2 m per stand
12-18 months
Single row 5510-8535-000 1 per stand
5510-8549-004 1 per 2½ stands and 1 per row
5510-6040-001 1,8 - 2,0 m per stand
5510-8511-003 0,9 - 1,0 m per stand
Cubicle partitions Model

2” cubicle partition with mounting plate
dim. 115 x 200 cm 5510-8535-019
dim. 115 x 190 cm 5510-8535-016
2” cubicle partition, dim. 100 x 170 cm 5510-8535-000
Support posts
Support post 2½”
with PVC sleeve, length 148 cm 5510-8548-000
with foot plate, length 129 cm 5510-8549-004
Allignment plate with 4 anchors M12 and protective caps (1 per
support post with foot plate) 5510-8567-002
Concrete anchor M12 x 111 (3 per support post with foot plate)
5580-1219-009
Clamps and tubing
Tee-clamp, cast iron, 2” x 2” 5510-1250-000
Cross clamp 2” x 2” (double row) 5510-1966-001
Cross clamp, cast iron 5510-1252-000
Tee-clamp 2” x 2” 5500-9618-002
Clamp with spacer 2” x 1½” 5510-9625-002
Cross clamp 2½” x 2” 5510-9629-006
Meter tube 2” 5510-6040-001
Meter tube 1½” with thread and socket 5510-8511-003
Adjustable knee retainer
Adjustable knee bar support (1 per partition)
1½” 5510-7112-001
2” 5510-7112-002
Adjustable knee board support (1 per partition) 5510-7112-005
Space Tube 01-05-2010
New! 229,5
Leaves room in your budget for other things and even more important,
gives you dairy cattle space. At the front the cows have so much space
as if they were lying in the pasture. Because the partition has a horizontal
part underneath, it ensures a clear guiding effect.
Space Tube Model

Space Tube cubicle partition for cubicle beds with a length of 200-215
230 cm and a width of 115-125 cm, extra high model, 127 cm 127
underneath the shoulder bar
with mounting plate 5510-8539-024
without mounting plate 5510-8539-008
Space Tube cubicle partition for short cubicle beds of 220 cm
with mounting plate
5510-8539-007
Space Tube cubicle partition for fitting to horizontal tubes
met montageplaat, 107 x 190 cm 5510-8539-011
zonder montageplaat, 107 x 190 cm 5510-8539-000
met montageplaat, 107 x 200 cm 5510-8539-013 205
zonder montageplaat, 107 x 200 cm 5510-8539-001 230
Clamps and tubing
Mounting clamp 2” with 4 holes 5510-9629-000
Mounting clamp 2” with 2 holes 6630-9630-003
Clamp with seperate spacer 2” x 1½” 5510-9625-002
Tee-clamp 2” x 2” 5500-9618-002
Cross clamp (double row) 2” x 2” 5510-1966-001
195 25
Meter 1½” tube with thread and socket 5510-8511-003
Meter 2” tube with thread and socket 5589-2000-015
Middle clamping plate for double rows from 480-500 cm 5510-8539-029
Support posts and accessories
Support post 2½”
192
Concrete anchor M12 x 111 5580-1219-009 117
Cross clamp (double row) 2½” x 2” 5510-1231-002

Tee-clamp 2½” x 2” 5510-9618-000
Cross clamp 2½” x 2” 5510-9629-006
Meter 2” tube 5510-6040-001
Accessories
Adjustable knee bar support 5510-7110-004 18
Meter of nylon band 5580-2019-000
Clamping plate 2” for nylon band incl. threaded straps
middle 5510-8512-016
end 5510-8512-017 175
Knee bars see page 11 220
6 Tel. 0031-58-2911129
01-05-2010
Brisket concrete cubicle concept
The importance of the well-being of cows is getting more and more clear.
The positive effects will not only increase the health, but also the results.
The most important feature required from the “ironwork” on the cubicles
is that the cows are being guided as good as possible. In such a way that
they will lie down properly next to each other “like cigars in a box”. And
preferably with their behind slightly over the rear edge. Furthermore we
would like to offer the animals freedom as much as possible. Especially
towards the front there should not be any obstacles. And not too expen-
sive please. The brisket concrete cubicle concept intends to satisfy those
demands by letting the floor and the cubicle partition work together.
By applying the brisket concrete elements a rounded cow-friendly thres-

hold will prevent cows from sliding too much to the front. As the concrete
elements are completely closed, it will not be a breeding place for bacteria
as a result of saliva. The co-operation between the brisket concrete and
the cubicle partition can also be found in the fact that the reised concrete
is an ideal foundation for the ironwork. As a result of this the support posts
and mounting tubes, which are commonly used to fasten the cubicle
partitions, are no longer needed. On the one hand this results in a price
advantage, because we need less tubing, on the other hand the cows now
get a completely free headspace, as in a pasture.
Partition Model
Cubicle partition, with 1 vertical hole for direct mounting on
concrete
length 195 cm 5510-8538-002
length 205 cm 5510-8538-003
2” clamp with 4 holes diameter 14 mm 5510-9629-000
2” tube with thread and socket, on lengths of 6 meters, per meter 5589-2000-015
T-clamp 2” x 2” with 2 bolts 5500-9618-002
Meter of nylonband 5580-2019-000
Clamping plate (middle) incl. 2” threaded straps 5510-8512-016
Clamping plate (end) incl. 2” threaded straps (2 per row) 5510-8512-017
Accessories brisket concrete
Concrete threaded achor M12 x 111 5580-1219-009
Anchor bolt M12, with nut (to be used in formwork if so desired) 5510-8566-002
Template with 8 anchors to be placed during casting 5510-8538-040
R-flex
R-Flex Model The cantilever R-cubicle partition, known and praised for its excellent stee-
Cubicle partition with 1 vertical hole for direct mounting on ring and the straight lying position of the cows, now bent from one piece
concrete and equipped with an animal-friendly nylon band. To the front this partition
length 195 cm 5510-8535-011 is fully open, so the cows can freely stand up and lie down. To the side the
length 205 cm 5510-8535-002 partition is closed, so the cows will lie straight. And ... flexible: the partition
2” clamp with 4 holes diameter 14 mm 5510-9629-000 that follows the cow when lying down and standing up. As an option it can
2” clamp with 2 holes 5530-9630-003 be equipped with a high knee board.
2” tube with thread and socket, on lengths of 6 meters, per meter
5589-2000-015
T-clamp 2” x 2” with 2 bolts 5500-9618-002
Meter of nylonband 5580-2019-000
Clamping plate (middle) incl. 2” threaded straps 5510-8512-016
Clamping plate (end) incl. 2” threaded straps (2 per row) 5510-8512-017
Concrete anchor M12 x 111 5580-1219-009
Extras
Cross clamp for retaining bar 2” x 1½ 5510-9618-010
Meter of 1½” tube with thread and socket 5510-8511-003
Knee bar support 5510-7109-003
Concrete anchor M10 x 90 5580-1219-000
Meter of hardwood 205 x 33 mm, rounded 5580-3300-001
Model-R cubicle partitions 01-05-2010
B A The model-R cubicle partitions are

suitable for the heaviest cows and
they are supplied with a large head
opening. The rear leg is placed far
towards the front, minimising the
risk of corrosion through the action
of manure. The model-R cubicle
partitions have a foot plate with
holes in triangular arrangement
C
for extra stability. European patent
D number 0057490.
Measurements model-R cubicle partitions The cubicle partitions for large

5510- 8530-004 8530-002 8530-001 8530-000 3199-000
stock are made from 2” tubing (ø
60,3 mm, wall thickness 3,65 mm).
A 190 cm 180 cm 165 cm 135 cm 155 cm
The mounting plate is mounted
B 25 cn 22 cm 8 cm 14 cm 20 - 30 cm
with use of threaded straps, which
C 110 cm 103 cm 95 cm 75 cm 100 cm makes the shoulder bar adjustable.
D 80 cm 75 cm 60 cm 50 cm not applicable. With cross holes for fitting to hori-
E 50 - 60 cm 50 cm 40 cm 30 cm 50 - 60 cm zontal tubes or support posts.
F 115 cm 107 cm 90 cm 80 cm 110 - 120 cm
G 220 cm 210 cm 180 cm 160 cm 165 - 180 cm New!
The cubicle partitions for large
stock are higher, which gives your
dairy cows even more space.
Requirements model-R cubicle partitions

> 22 months Model Number
5510-8530-004 1 per stand
New!
5510-6065-000 2,2 - 2,4 m per stand
15-22 months
5510-8530-002 1 per stand
5580-1219-002 3 per partition 5510-8530-000
5510-6065-000 2,0 - 2,2 m per stand
12-15 months
Model-R cubicle partitions Model
5510-8530-001 1 per stand
Model-R cubicle partition
entirely 2”, dim. 110 x 190 cm 5510-8530-005
dim. 110 x 190 cm 5510-8530-004
5510-6065-000 1,8 - 2,0 m per stand
for short stand, dim. 117 x 185 cm 5510-8530-003
5-12 months dim. 103 x 180 cm 5510-8530-002
5510-8530-001 1 per stand dim. 95 x 165 cm 5510-8530-001
5580-1219-002 3 per partition new model, dim. 75 x 135 cm 5510-8530-000
5510-9622-001 2 per partition Accessories
5510-6065-000 1,6 - 1,8 m per stand
Concrete threaded anchor
2-6 months M12 x 78 5580-1219-002
5510-8530-000 1 per stand M12 x 111 5580-1219-009
5580-1219-002 3 per partition Cross clamp 1½” x 1½” 5510-9622-001
Meter of 1½” tube, with coupling 5510-5065-000
5510-6065-000 1,4 - 1,6 m per stand
Feed cubicle partition
Feed cubicle partition
Feed cubicle partition with foot plate and straight front leg
5510-3199-000 1 per stand
5510-3199-000
5510-3091-000 1 per stand
5580-1219-009 3 per partition Neck bow for 105 - 120 cm from centre to centre 5510-3091-000
5510-9622-001 2 per partition Tube clamp 57 mm x 48 mm 5510-9624-003
8 Tel. 0031-58-2911129
01-05-2010
Cantilever cubicle partitions
B C
Cantilever cubicle partitions Model Measurements cantilever cubicle partitions (in cm)
Cubicle partition 2”, with mounting plate 5510- 8538-005 8538-004 8538-001 8538-000 3316-000 3313-000
dim. 100 x 200 cm 5510-8538-028 A 120 120 110 100 100 80
cim. 100 x 190 cm 5510-8538-026
B 200 190 180 170 155 135
(short stand) dim. 90 x 180 cm 5510-8538-019
dim. 80 x 170 cm 5510-8538-017 C 25 25 25 20 15 15
D 50 - 60 50 - 60 50 - 60 45
Cubicle partition 2”, without mounting plate
dim. 100 x 200 cm 5510-8538-005 E 20 20 20 20 25 20
dim. 100 x 190 cm 5510-8538-004 F 221 211 201 186 167 147
(short stand) dim. 90 x 180 cm 5510-8538-001 G 220 - 230 210 - 220 210 - 220 200 180 160
dim. 80 x 170 cm 5510-8538-000
Cantilver cubicle partition
dim. 70 x 155 cm 5510-3316-000
dim. 57 x 130 cm 5510-3313-000
Support posts
Support post 2½
5510-8512-014 5510-8512-017 5510-3316-000 / 5510-3313-000
Support post 2”, with foot plate, length 125 cm 5510-8549-001
Support post 1½”, with foot plate, length 85 cm 5510-8549-006 Requirements cantilever cubicle partitions
Alignment template with 4 anchors M12 and protective caps (1 > 18 months Model Number
per support post with foot plate) 5510-8567-002 5510-8538-026 1 per stand
Concrete anchor M12 x 111 (3 per post with cast-in foot) 5580-1219-009 5510-8549-004 1 per 2 stands and 1 per row
Clamps and tubing
Tee-clamp 1½” x 1½” 5510-1230-007 5510-9629-006 2 per support post
5510-6040-001 2,2 - 2,4 m per stand
Cross clamp (double row)
5510-8511-003 1,1 - 1,2 m per stand
2” x 2” 5510-1966-001
2½” x 2” 5510-1231-002 12-18 months
Tee-clamp 5510-8538-017 1 per stand
2” x 2” 5500-9618-002 5510-8549-004 1 per 2½ stands and 1 per row
2½” x 2” 5510-9618-000 5510-8567-002 1 per support post
Heavy-duty corner clamp incl. threaded straps 5510-9619-001 5510-9625-002 1 per partition
Cross clamp 1½” x 1½” 5510-9622-001 5510-9629-006 2 per support post
5510-6040-001 1,8 - 2,0 m per stand
Cross clamp 2½” x 1½” 5510-9623-002
5510-8511-003 0,9 - 1,0 m per stand
Clamp with seperate spacer 2” x 1½” 5510-9625-002 5-12 months
Cross clamp 2½” x 2” 5510-9629-006 5510-3316-000 1 per stand
Meter of 2” tube 5510-6040-001 5510-8549-004 1 per 3 stands
Meter of 1½” tube with thread and socket 5510-8511-003 5510-1230-007 2 per partition
Accessories 5510-9622-001 1 per partition
Adjustable knee bar support 5510-7110-004
5510-8511-003 2,4 - 2,7 m per stand
Meter of nylon band 5580-2019-000 2-6 months
Clamping plate for nylon band incl. threaded straps 5510-3313-000 1 per stand
centre, 1½” 5510-8512-014 5510-8549-006 1 per 3 stands
centre, 2” 5510-8512-016 5510-8567-002 1 per support post
centre, 2½” 5510-8512-018 5510-1230-007 2 per partition
end, 1½” 5510-8512-015 5510-9622-001 1 per partition and 1 per support post
end, 2” 5510-8512-017 5510-8511-003 2,1 - 2,4 m per stand
Fittings for cubicle partitions 01-05-2010
Stoppers Model
PVCU tube stopper
1½” 5580-8007-000
2” 5500-8007-002
2½” 5500-8007-000
3” 5500-8007-001
Fitting retaining board
5550-5201 5510-7107 5550-4285 5510-8885
Angle foot plaat, dim. L x W x H = 10 x 5 x 13 cm
without fittings 5550-5201-000
incl. croncrete anchor and nut bolt 5510-8565-001
Accessories for fitting tubes
Bowl-shaped fastener for fitting shoulder bar and retaining bar to
end walls and trusses
1½”, incl. nut bolt 8 x 70 5510-7107-002
2”, incl. nut bolt 8 x 80 5510-7107-004
End coupler 1½”, length 52 cm, for flexible fitting of shoulder bar
to end walls
without clamp 5510-8885-000
A incl. clamp 9622 5510-8885-003
Foot for fixing tube to wall
for 1½” tube 5550-4285-000
for 2” tube 5550-4285-001
5510-8887 Set of 2 adapters for fitting nos bar to truss leg, without threaded
straps and bolts
5510-8515 size A = 6,5 cm 5510-8887-003
size A = 10,0 cm 5510-8887-005
size A = 14,0 cm 5510-8887-007
Threaded strap, hot dip galvanised
M12 x 82 mm (1½” tube) 5540-9660-003
5510-6065-000 5510-8511-003 M12 x 95 mm (2” tube) 5540-9660-005
Heightening shoulder bar
Heightening shoulder bar complete
25,0 cm, 1½” 5510-8515-004
17,5 cm, 2” 5513-8515-001
incl. clamp 9625, 17,5 cm, 2” 5510-8515-005
5510-8548 5510-8549 5510-8550
Shoulder bar and retaining bar Model

Shoulder bar and retaining bar 1½”, with smooth ends, incl.
couplers, lengths of 6 meters, per meter 5510-6065-000
Retaining bar 2”, with smooth ends, lengths of 6 meters, per
meter 5510-6040-001
Retaining bar 1½”, with thread and socket, lengths of 6 meters,
per meter 5510-8511-003
Neck bar 2” with thread and socket 5589-2000-015
Support posts
Cement-in support post with stopper and PVCU sleeve
2”, length 148 cm 5510-8548-001
2½”, length 148 cm 5510-8548-000
3”, length 195 cm 5530-7801-003
Floor-mounted support post with stopper and foot plate
1½”, length 85 cm 5510-8549-006
2”, length 125 cm 5510-8549-001
2½”, length 129 cm 5510-8549-004
Alignment template with 4 anchors M12 and 4 protective caps (1
per support post) 5510-8567-002
Floor-mounted support post 2½” (76 mm ø), with cap and cast-in
foot 24 x 18 x 9 cm, length 107 cm, with 3 holes M12 5510-8550-000
Floor-mounted support post 2½” (76 mm ø) with foot plate and
shore, length 150 cm, with 3 holes 5530-7824-001
Galvanised concrete threaded anchor with nut, M12 x 111 (3 per
support post) 5580-1219-009
10 Tel. 0031-58-2911129
01-05-2010
Accessories for cubicle partitions
In order to increase the well-being of cows, there are several accesso-
ries available. The synthetic partition wall is particularly suited to serve
as an end wall in a row of cubicles. Thus, drafts in the first stands can
be drastically reduced and also when the cubicles are situated next to a
water reservoir the beddings keep perfectly dry. With its smooth finish, the
synthetic wall can be cleaned adequately and fast. This synthetic material
is resistant to slurry and moisture. When using stand retainers the cows
will lie down in the right way. This will increase comfort and hygiene.
5550-1932-001 5550-1932-000 5510-9622-001

5510-8510-006 5530-9630-002
Synthetic partition wall Model

Complete synthetic end wall for single row, consisting of: 6
5530-9630-002
boards, 2 clamping strips, 2 single U-sections, 2 mounting
clamps, 4 bolts and 1 tube 5510-8886-015
cast-in 5510-8888-025
floor-mounted 5510-8888-026
Complete synthetic end wall for double row, consisting of: 12
boards, 4 clamping strips, 2 single U-sections, 1 double U-section,
4 mounting clamps, 8 bolts and 2 tubes
cast-in 5510-8888-023
floor-mounted 5510-8888-024
Grey double-walled synthetic board with groove and tongue,
covered width 20 cm, 4 cm thick, length 230 cm 5550-1932-000
PVC clamping strip, length 120 cm, colour black 5550-1932-001
Mounting clamp for 1½” tube 5530-9630-002 5510-8886-019 5510-8886-018 5510-8886-020
Hexagon-head bolt M12 x 80 mm 5500-1210-100
Tube 1½”, length 240 cm 5510-8510-006
U-section for fitting the synthetic partition wall
cast-in double, length 149 cm 5510-8886-021
cast-in single, length 149 cm 5510-8886-015
floor-mounted double, length 120 cm 5510-8886-018
floor-mounted single left, length 120 cm 5510-8886-019
floor-mounted single right, length 120 cm 5510-8886-020 Rear edge retainer for cubicle partitions Model
Rear edge retainer, hot dip galvanised, incl. couplers and rubber
end piece, per length of 250 cm 5510-7180-003
Cover plate for rear edge retainer (required when using cubicle
foor covering), per length of 250 cm 5510-7181-001
Concrete threaded anchor bolt M12 x 78 mm (5 per plate) 5580-1219-002
Rear tube - knee bar
Support for fitting rear bar
(1 per box) for 1½” tube 5510-7108-000
(1 per 2 boxes) for 2” tube 5510-7108-003
(1 per 3 boxes) for 2½” tube 5510-7108-001
Rear edge retainer
Support for fitting knee bar, for 1½” tube (1 per box)
5510-7109-001
Retaining bar with thread and socket, in lengths of 6 meters
1½”, per meter 5510-8511-003
2”, per meter 5589-2000-015
2½”, per meter 5589-8511-001
Rear tube Knee bar

Adjustable knee retainer
Adjustable knee bar support, incl. mounting clamps (1 per
partition)
for use with cubicle partitions 8538, 1½“ 5510-7110-000
170-180 for use with cubicle partitions 8538, 2” 5510-7110-001
for use with cubicle partitions 8535, 1½” 5510-7112-001
for use with cubicle partitions 8535, 2” 5510-7112-002
Meter of 2” mounting tube with two-part clamp coupling (1,1
meters per partition) 5510-6040-001
Adjustable knee board support
for cubicle partitions 8538 5510-7110-004
for cubicle partitions 8535 5510-7112-005
Knee bar support Polyround knee bar
Meter of hardwood 205 x 33 mm, rounded 5580-3300-001
Polyround knee bar
Knee bar Polyround, length 290 cm (effective length 284 cm),
height 15 cm, width 24 cm 5550-0506-000
Screw / hammer plug, length 80 mm, with 8 mm plug (20 per
Knee bar Knee board
length of knee bar) 5520-0503-005
Polyethylene knee bar
New! Knee bar ø 110 mm, length 600cm 5510-3511-001
Coupling tube, length 25 cm 5510-7111-001
Mounting set to end wall 5510-7111-005
Centre part for fitting to 8539.ST 5510-7111-006
Polyethylene knee bar End hood for polyethylene knee bar 5510-7111-007
Tube clamps 01-05-2010
Brouwers delivers a wide range of Tube diameters Description Dimensions Model

tube clamps for the fitting of tubes. ¾” ( 27 mm)
We have the right clamp for every 1” ( 34 mm)
situation available. In the descripti- 1¼” ( 42 mm)
on the size of the vertical (standing) 1½” ( 48 mm)
tube is mentioned first and then the 2” ( 60 mm)
size of the horizontal (lying) tube. 2½” ( 76 mm)
3” ( 89 mm)
3½” (101 mm)
4” (114 mm)
Tee-clamp cast iron 2” x 2” 5510-1250-000

Description Dimensions Model
½” x ½” 5510-1230-000
¾” x ¾” 5510-1230-001
1” x 1” 5510-1230-002
1¼” x 1” 5510-1230-003
1¼” x 1¼” 5510-1230-004
1½” x 1” 5510-1230-005
1½” x 1¼” 5510-1230-006
1½” x 1½” 5510-1230-007
1½” x 2” 5510-1230-008
2” x 1½” 5510-1230-009
Tee-clamp with 1 bolt 2” x 2” 5510-1230-010
Tee-clamp with 2 bolts 2½” x 1½” 5510-1230-011 Cross clamp cast iron 2” x 2” 5510-1252-000
1½” x 1¼” x 1½” 5510-1945-001

1½” x 1½” x 1½” 5510-1231-005
2” x 1½” x 1½” 5510-1231-006
2” x 2” x 2” 5510-1966-001
Cross clamp with 2 bolts 2½” x 2” x 2” 5510-1231-002
Cross clamp with 4 bolts 2½” x 1½” x 1½” 5510-1231-001 1½” 5510-3450-000
2½” x 2” x 2” 5510-1231-003 Double locking clamp 2” 5510-3450-001
Three-way clamp 1½”x1¼”x1¼”x1¼ 5510-1232-000 1½” 5510-3455-000

Corner clamp (not shown) 1½”x 1¼”x 1½” 5510-1233-000 Single locking clamp 2” 5510-3455-001
2” x 1½” 5510-9616-000
3” x 1½” 5510-9616-001
3” x 2” 5510-9616-002
Two-piece clamp coupling with car- 1½ 5510-1235-000 3½” x 1½” 5510-9616-003
riage bolt 2” 5510-6031-004 Cross clamp 3½” x 2” 5510-9616-004
1½” x 1½” 5510-9618-006

1½” x 2” 5510-9618-008
1¼” x 1¼” 5510-1245-000 2” x 1½” 5510-9618-010
1½” x 1½” 5510-1245-002 2” x 2” 5500-9618-002
Tee-clamp with 2 bolts 2” x 1½” 5510-1245-004 Tee-clamp 2½” x 2” 5510-9618-000
12 Tel. 0031-58-2911129
01-05-2010
Tube clamps
Description Dimensions Model Description Dimensions Model
Corner clamp cast iron 2” x 2” 5510-9619-001 Tube clamp with seperate spacer 2” x 1½” 5510-9625-002
1½” x 1½” 5510-9626-005

1” x 1” 5510-9620-000 2” x 1½” 5510-9626-006
1¼” x 1¼” 5510-9620-001 2” x 2” 5510-9626-007
1½” x 1” 5510-9620-002 2½” x 1½” 5510-9626-009
1½” x 1¼” 5510-9620-003 2½” x 2” 5510-9626-010
Tube clamp 1½” x 1½” 5510-9620-004 Tube clamp 2½” x 2½” 5510-9626-008
1” x 1” 5510-9621-005
1¼” x 1” 5510-2434-000
1¼” x 1¼” 5510-9621-007
1½” x 1” 5510-9621-009
1½” x 1¼” 5510-9621-010 1” x 1” 5510-9627-002
1½” x 1½” 5510-9621-001 1¼” x 1” 5510-9627-003
1½” x 2” 5510-9621-012 1½” x 1¼” 5510-9627-004
1½” x 2½” 5510-9621-008 1½” x 1” 5510-9627-005
Tube clamp 2” x 2” 5510-9621-017 1½” x 1¼” 5510-9627-006
Tube clamp with duplex coating 2” x 1½” 5510-9621-013 Adjustable parallel clamp 1½” x 1½” 5510-9627-007
1½” x 1½” 5510-9628-003

2” x 1½” 5510-9628-005
2” x 2” 5510-9628-006
2½” x 1½” 5510-9628-009
2½” x 2” 5510-9628-010
Cross clamp 1½” x 1½” 5510-9622-001 Corner clamp 2½” x 2½” 5510-9628-008
2½” x 1½” 5510-9629-005

2” x 1½” 5510-9623-001 2½” x 2” 5510-9629-006
Cross clamp 2½” x 1½” 5510-9623-002 Cross clamp 2½” x 2½” 5510-9629-004
¾” 5530-9630-000
1” 5530-9630-001
1¼” 5530-9630-011
1½” 5530-9630-002
2” 5530-9630-003
2½” 5530-9630-004
3” 5530-9630-005
3½” 5530-9630-006
Tube clamp with 6 cm spacer 1½” x 1½” 5510-9624-001 Mounting clamp, without carriage bolts 4” 5530-9630-007
Gummysoft 01-05-2010
Gummysoft Model A good floor covering helps you to

Reinforced rubber top cover, 180 cm wide maximise the performance of your
8 mm thick, per linear metre 5520-0328-000 cows. Research has shown that
10 mm thick, per linear metre 5520-0328-002 cows appreciate the comfort of a
Rubber underlay strip, 10 mm thick, per linear metre soft bedding. They stay longer in
(front and sides) 100 mm wide 5520-3508-000 the cubicles and use less phy-
(back) 200 mm wide 5520-3508-002 sical energy. As their well-being
Wooden underlay strip, 26 mm thick, 100 mm wide (front and improves, they are less susceptible
sides), per linear metre 5520-3508-019 to stress and are more resistant to
Polyurethane foam mattress, dimentions 150 x 100 cm, 25 mm infections and thus are healthier.
thick, density 160 kg/m³ 5520-3506-004 And, after all, a healthy cow is a
Stainless steel mounting strip, 45 mm wide, 3 metres long, with profitable cow.
11 holes 5520-3524-000
Stainless steel drive-in screw with 8 mm plug, length 80 mm 5520-0503-005 Practice has learned that cows
Stainless steel carriage bolt 6 mm rest on these mattresses for as
length 40 mm 5500-1212-001 much as up to 16 hours per day.
length 60 mm 5500-1212-003 Ruminating in a lying position is
Roll of 0,2 mm foil, dimension 50 x 4 metres 5520-3506-000 more effective, it stimulates the
Roll of tape for sealing the foil, 50 mm x 60 metres 5520-3506-003 blood circulation in the udder and
the legs will be relieved when the
cows are lying. The cop cover is a
thick rubber mat supplied on a roll.
It is strong, it retains moisture and
it is easy to clean. The underlay is
a mattress of 100% polyurethane
foam. Independent research by the
German DLG has shown that this
material best keeps its flexibility.
Cow have excellent grip on the
mattress system. They can easily
stand up and lie down, thus redu-
cing worn patches on the joints. Cross-section Polysoft mattress
Set for connecting two top mats
Burled rubber
This burled rubber mat is deliverd on rolls, provided with a fabric inlay and
made of new rubber with only a small percentage of regenerate. The mat
can be fixed with hammer screws incl. washer, to be mounted each 25 cm,
with a minimal distance of 10 cm from the front of the mat. A more luxuri-
ous way of fixing is the stainless steel corner strip, with which you fasten
the mat and at the same time seal it a the front.
Specific advantages
• Delivery on rolls, also no puzzling with joints.
• The closed top layer is clean and hygienic.
• Rubber with a fabric inlay remains stable and flat.
• New rubber with only a small percentage of regenerate.
• Wear-resistant (10 years of guarantee).
• Easy to lay and to fix.
• Stable because of its large own weight.
Burled rubber Model

Meter of burled rubber mat
20 mm thick, 160 cm wide 5520-0336-000
20 mm thick, 170 cm wide 5520-0337-000
20 mm thick, 180 cm wide 5520-0338-000
25 mm thick, 180 cm wide 5520-0348-000
Stainless steel corner strip, length 3 m, with 11 holes
for burled rubber N20 5520-0758-001
for burled rubber N25 5520-3508-013
Stainl. steel hammer screw + plug 8 mm, length 80 mm 5520-0503-005
stainless steel washer 8,4 x 25 5500-8000-154
14 Tel. 0031-58-2911129
01-05-2010
Polysoft cubicle floor covering system
Polysoft cubicle floor covering system Model
Mattress from polyurethane foam, density 180 kg/m³, dimensions
100 x 175 cm
3 cm thick 5520-3506-005
4 cm thick 5520-3506-006
Polysoft cover mat on roll, width 2 meters, per linear metre
smooth design 5520-3507-001
lightly profiled design 5520-3507-002
Polyfleece cover mat on roll, width 2 metres, incl. 140 cm of
fleece, per linear metre 5520-3507-006
Roll with 0,2 mm plastic foil 5520-3506-000
Roll of tape for sealing the foil, 50 mm x 60 metres 5520-3506-003
The well-being of cows is fortunately getting more and more attention. The
advantages, socially as well as economically, are evident. Prolongation of
the daily lying duration of cows will increase the efficiency of the rumina-
ting process and relieve the legs and claws, with an increase in recovering
time. Floor covering should furthermore give grip to the cows, without
being rough in the sense of sandpaper. The use of saw dust appears to
lead to drier cubicles and cows. In order to keep the use of saw dust within
limits, some structure on the surface is desirable. This list of demands is
perfectly filled in by the Polysoft floor covering system.
A 100% polyurethane foam, with a density geared for the properties of

Fastening items Model
the top mat, takes care of the suspension, flexibility and grip. The foam is
being wrapped up in a heavy-duty foil, in order to prevent the absorbing of
Synthetic fastening strip, length 2 metres
with stainless steel drive-in screws 5520-3502-005
condensation fluid, especially from underneath.
with drive-in pins 5520-3502-004
Aluminium fastening strip, length 2 metres
The 100% moisture-resistant top mat composes of an extremely dense
with stainless steel drive-in screws 5520-3522-024 woven polyester reinforcement. This tissue combines great strength with
with drive-in pins 5520-3522-023 a certain amount of elasticity. This enables peak loads to be spread over
Set for connecting two top mats, consisting of a synthetic strip, a larger surface. The biggest enemy of synthetics is ageing. The PVC
an aluminium strip and 4 concrete anchors 5520-3503-000 coating which we use on this tissue is 100% PVC. Also no filling materials,
Stainless steel drive-in screw with plug 8 mm, length 80 mm 5520-0503-005 that would help to make the top mat cheaper on the one hand, but on the
Drive-in pin 5520-0503-004
other hand would speed up the ageing process and diminish the flexibility.
Synthetic clamping disc 5520-0507-002
The Polysoft mattresses can also be delivered for young stock. Ask for the
Drift for drive-in pin (included in the supply) 5520-3523-000
possibilities!
Polysoft calve mattress

New!
The bottom in a calve stall mostly consists of straw, sans or saw dust.
Cleaning takes a lot of time and is therefore done not often and/or not
good enough, with all risks of infection. It is very miportant to maintain a
high level of hygiene with new born calves. In order to achieve this goal
Brouwers Equipment presents a new solution: the Polysoft calve mattress.
This layer gives the new born calve the best possible start and makes
cleaning the calve box a piece of cake.
The advantages: optimal animal well being, soft layer, gives grip to the
animals, quick and easy cleaning, prevents infection diseases.
In short: before every birth you will quickly have a comfortable calve stall.
A unique product which was tested far best in an independent Danish
university test.
Polysoft calve mattress Model

Polysoft cover mat, available in lengths up to 6 metres
width 395 cm, per linear metre 5520-3507-003
widt 590 cm, per linear metre 5520-3507-004
Mattress from polyurethane foam, density 180 kg/m³, dimensions
100 x 175 cm
3 cm thick 5520-3506-005
4 cm thick 5520-3506-006
Synthetic fastening strip, length 2 metres, with the double amount
of drive-in screws 5520-3502-006
Locks® feed barriers 01-05-2010
Why doesn’t the feed barrier watch each cow to be kept standing for an equal length of time? Why can’t the feed
barrier lock an individual cow that needs treatment, without disturbing the rest of the herd? Why doesn’t the feed
barrier tell every day how long an how often each individual cow took its roughage? Why doesn’t the feed barrier,
or part of it, help to feed certain amounts of extra nourishment to selected cows?
Brouwers Equipment and Nedap from Groenlo have found the answer to all these questions and are introducing
a completely new generation of feed barrier systems. The basic model is a mechanical safety barrier. In E-locks®
the operating system communicates with every single feed opening.
M-locks®
The basic model is a mechanical safety barrier. Individual manual two-sided unlocking is standard. Extremely
light operation, which makes it possible to operate a great length of barrier from one point. Safety means that
when a cow accidentally falls, the head can be easily freed from the feed opening. The barrier is noiseless by
using maintenance free synthetic components instead of steel to steel.
E-locks® general
The system consists of a certain amount of feed openings, each provided with an individual electrical actuator
for the bolt slide. The bolt slide determines the position of the bolts. Underneath each actuator box is a surveyor
(reed-contact) within the upper operating bar. With help of this surveyor and a permanent magnet in the catch
bar buffer, the operating system can see when the catch bar is fully opened. Each actuator unit is individually
secured. Each controller can manage 120 feed openings (actuators). These 120 feed openings can be devided
into 6 groups, for which separate settings are possible. The operating system will always be overruled in case of
individual unlocking by hand.
Mastitis prevention
This E-locks® function will take care that cows, who are eating at the feeding barrier after leaving the milking
parlour, will be held for a preset time. This will keep each individual cow standing for an equal amount of time,
independent of the time of locking-in, thus giving the udders time to dry and close under hygienic circumstances.
7355
16 Tel. 0031-58-2911129
01-05-2010
Locks® feed barriers
19,5 65
155-160
106
55-60
+5
Anti-gorge function M-locks® Model

With this function you can “stack” the cows at the feed barrier. With help of M-locks® safety feed barrier
the controller you can set this function for the desired group of feed ope- with 2 feed openings, 130 cm c.t.c., 65 cm per cow 5530-7300-018
nings and close the concerning catch bars. The first feed opening, where with 2 feed openings, 140 cm c.t.c., 70 cm per cow 5530-7300-021
the cows have to start eating, will be left ope by the system. Only after the with 2 feed openings, 150 cm c.t.c., 75 cm per cow 5530-7300-023
first cow leaves the milking parlour and closes the catch bar with its head, with 3 feed openings, 195 cm c.t.c., 65 cm per cow 5530-7300-025
with 3 feed openings, 210 cm c.t.c., 70 cm per cow 5530-7300-028
the next feed opening will be unlocked etc. with 3 feed openings, 225 cm c.t.c., 75 cm per cow 5530-7300-030
Of course it is best to start at a place where jams from the milking parlour with 4 feed openings, 280 cm c.t.c., 70 cm per cow 5530-7300-035
can be prevented as much as possible. In this way E-locks® also helps with 4 feed openings, 300 cm c.t.c., 75 cm per cow 5530-7300-038
the cow routing. As a result of this function each cow has less opportunity with 5 feed openings, 325 cm c.t.c., 65 cm per cow 5530-7300-040
to select the tasty bites from the adjacent forage. with 7 feed openings, 440 cm c.t.c., 63 cm per cow 5530-7300-043
Separating cows Operating lever 5530-7355-005

From the catch position you can order certain feed openings to hold the Operating lever foor 7300.280 5530-7355-013
cows concerned with help of the controller. The feed openings set in this E-locks®
way can be made visible on the controller, showing whether this is a single E-locks® safety feed barrier
manual setting or an automatic setting. with 2 feed openings, 130 cm centre to centre
with 3 feed openings, 195 cm centre to centre
Feed openings that have the instruction to lock in a cow for a longer with 4 feed openings, 260 cm centre to centre 5530-7300-068
with 5 feed openings, 325 cm centre to centre 5530-7300-070
period will be skipped with the anti-gorge function or the normal E-locks®
mastitis prevention as mentioned before. Controller for 120 of E-locks® feed openings, to be divided into 6
groups at the most 5530-7300-055
Fastening materials
Centrally in catching position
Cement-in support post 2½” with PVC sleeve and stopper,
With the controller ou can centrally set the feed barrier in catching posi-
length 175 cm 5530-7801-001
tion. You can choose to set all feed openings, a group of feed openings, or
Cement-in support post 2½” with PVC sleeve, foot plate for
a single feed opening in this position. This function can be handy to lock in
prefab floor and stopper
certain animals. If you see a cow in a certain feed opening, it is also pos- length 175 cm 5530-7823-006
sible to lock only this individual feed opening on the controller. length 162 cm 5530-7823-005
length 152 cm 5530-7823-004
Unlocking groups of feed opening Mounting clamp 2½”, for fitting board below feed barrier, without
You can unlock each group of feed openings from the closed position bolts 5530-9630-004
(all catch bars closed) at a set time. With this function you can prepare Standard set of mounting brackets (upper and lower mounting
energetic forage at the feed barrier and automatically admit cows after bracket) 325 cm centre to centre
they have had their portion of albuminous grass. Or you can automatically for mounting to tube 2” ( 60 mm ø) 5530-7702-025
unlock groups of feed openings at certain times of the day with fresh or for mounting to tube 2½” ( 76 mm ø) 5530-7702-001
for mounting to tube 3” ( 89 mm ø) 5530-7702-035
other kinds of forage.
for mounting to tube 3½” (102 mm ø) 5530-7702-041
for mounting to a level surface 5530-7702-059
Set of middle mounting brackets for 2½” tube 5530-7702-033
Set of end mounting brackets for 2½” tube 5530-7702-000
Set of extended mounting brackets for 2½” tube
c.t.c. distance + 5 cm
Universal truss mounting set for 7300.500 5530-7360-019
Hardware without support wheel 5530-7706-017
Support wheel for gates from 195 cm centre to centre 5530-7333-001
End post at extended mounting bracket 5530-7707-000
Walk-through gate
Walk-through gate incl. fastening items, internal walk-through
width 35 cm, internal walk-through height 116 cm, overall walk-
through height approx. 175 cm, overall width 65 cm (as 1 feed
opening) 5550-7200-015
Classic Locks feed barriers 01-05-2010
19,5 65
New!
Solid and spacious feed barrier.
155-160
Simple and extremely light opera-
tion in the upper profile, large lenth
with one operating lever possible.
Noiseless because of the synthetic
cap on the catch bar. Easier to in-
104
stall than its predecessor because
of the fastening to mounting brac-
kets. Can be built on to Locks®
55-60 feed barriers.
+5
Classic Locks Model

Classic Locks self-locking feed barrier
Operating lever 5530-7455-004
Fastening materials
Cement-in support post 2½” with PVC sleeve and stopper, length
175 cm 5530-7801-001
Cement-in support post 2½” with PVC sleeve, foot plate for
prefab floor and stopper
length 175 cm 5530-7823-006
length 162 cm 5530-7823-005
length 152 cm 5530-7823-004
Mounting clamp 2½”, for fitting board below feed barrier, without
bolts 5530-9630-004
Standard set op mounting brackets (upper and lower mounting
bracket), 325 cm centre to centre
for mounting to tube 2½” ( 76 mm ø) 5530-7702-001
Set of extended mounting brackets for 2½” tube
Hardware without support wheel 5530-7706-017
Support wheel for gates from 195 centre to centre 5530-7333-001
End post at extended mounting bracket 5530-7707-000
18 Tel. 0031-58-2911129
01-05-2010
Feed barriers for young stock
C B The self-locking feed barriers
for young stock have a multiple
D operating system (opened centrally,
in catch position centrally, in free
in-out position centrally and every
feed opening can be opened indi-
A vidually). With the internal locking
system being integrated in the
upper operating bar, the feed bar-
E riers are finished smoothly, without
projections. Because of the use of
synthetic parts, the feed barriers
are ear(tag)-friendly. An adjustable
neck width is standard.
+5
Measurements feed barriers for young stock

A B C D E
12 - 22 months 93 cm 54 cm 15 - 22 cm 143 cm 56 cm
Mounting brackets Model

standard set of mounting brackets (upper and lower bracket) 325
7305
cm centre to centre
for mounting to tube 2½” ( 76 mm ø) 5530-7702-001
Stock from 12 - 22 months Model
Barrier element
Set of end mounting brackets for 2½” tube 5530-7702-000 with 3 feed openings, 171 cm centre to centre 5530-7340-008
Set of extended mounting brackets for 2½” tube with 4 feed openings, 222 cm centre to centre 5530-7340-010
c.t.c. distance + 5 cm with 5 feed openings, 274 cm centre to centre 5530-7340-012
Stock from 6 - 15 months
Barrier element
Stock from 2-6 months (also suitable for goats)
Barrier element
Operating lever
Operating lever (up to approx. 25 feed openings) 5530-7305-004
Hardware
Hardware without support wheel
for barriers 7340 and 7350 5530-7706-016
for barriers hekken 7360 5530-7706-015
Support wheel for gates from 195 centre to centre 5530-7733-003
Support posts
Cement-in support post with PVC sleeve and stopper
for 7340 and 7350, length 165 cm, 2½” 5530-7801-000
for 7360, length 145 cm, 2” 5530-7801-004
Cement-in support post with PVC sleeve, foot plate for prefab
floor and stopper
for 7340, length 145 cm, 2½” 5530-7823-003
for 7350, length 132 cm, 2½” 5530-7823-001
for 7360, length 122 cm, 2” 5530-7823-000
Mounting clamp for fitting board below feed barrier, without bolts
2½” 5530-9630-004
2” 5530-9630-003
Self-locking Swedish feed barriers 01-05-2010
This self-locking Swedish feed barrier is specially designed for large stock.
The partitions are made from ø 57 mm tubing and have round “angles”,
which makes it easy to get in and out of the feed barrier, even for smaller
cows. The catch bar is made from 1¼” (ø 42 mm) tubing and is provided
with an individual unlocking possibility and collar protection underneath.
The turning point has a bronze bearing (unnecessary to grease!). The
lower profile is 70 x 70 mm square, which makes it additionally strong.
At gates from 440 cm an additional 2½” support post has to be placed.

Special mounting parts are included in the supply. The Swedish feed bar-
riers can also be delivered without locking bar (not self-locking).
Measurements self-locking Swedish feed barriers (in cm)

A B C D E F G H K
Large stock 86 49-54 ± 65 20 ø 5,7 1¼” □ 7x7 135-140 max. 150
Young stock 74 41-46 ± 45 17 1½” 1” □ 6x6 115-120 120
length centre to centre
E D C
F A
H
K
+5/+10 G
P=0
∆
∆ B
Self-locking Swedish feed barriers Model

Self-locking Swedish feed barrier for large stock
with 1 feed opening , 65 cm centre to centre 5530-7900-000
Self-locking Swedish feed barrier for young stock from 6-18
months
Accessories
Support post with protective sleeve
2½” x 175 cm 5530-7801-001
2” x 145 cm 5530-7801-004
Support post with cement-in foot plate and prot. sleeve
2½” x 162 cm 5530-7823-005
2½” x 152 cm 5530-7823-004
2½” x 142 cm 5530-7823-003
Self-locking door set
for large stock barriers up to max. 325 cm 5530-7926-000
for young stock barriers 5530-7926-001
Support wheel
for large stock barriers from 195 cm 5530-7833-002
for young stock barriers from 237 cm 5530-7833-003
Set of mounting parts 2½” 0-5 cm 5530-7902-000
Locking lever 5530-7905-018
Set of wall brackets 5530-7914-001
Mounting bracket 2½” without bolts 5530-9630-004
20 Tel. 0031-58-2911129
01-05-2010
Diagonal bar feed barriers
Diagonal bar feed barriers are C
suitable only for dehorned stock.
Upper and lower tubes 1½”, ver-
B
ticals 1”. Because the barriers of A
B
440 cm have a 2” upper and lower
tube (7870) or a strengthened
1½” upper and lower tube (7880 D
and 7890) no extra support post is
necessary anymore.
+5
Measurements diagonal bar feed barriers

A B C D
> 18 months 88 cm 30 cm 145 cm 62 cm
8-18 months 88 cm 26 cm 135 cm 52 cm
2-6 months 80 cm 23 cm 110 cm 45 cm
0-10 weeks 80 cm 19 cm 110 cm 45 cm
Stock from 18 months Model

Barrier element
Stock from 8-18 months
Barrier element
Stock from 2-6 months
Barrier element
Stock from 0-10 weeks
Barrier element
Hardware
Hardware for turning barrier elements into gate elements
for 7870H and 7870 5530-7876-008
for 7880 and 7890 5530-7876-007
Support wheel for barriers from 250 cm 5530-7883-001
Support posts
Cement-in support post with PVC sleeve and stopper
for 7870H, length 175 cm, 2½” 5530-7801-001
for 7870, length 165 cm, 2½” 5530-7801-000
for 7880-7890, length 145 cm, 2” 5530-7801-004
Cement-in support post with PVC sleeve, foot plate for prefab
floor and stopper
for 7870H, length 152 cm, 2½” 5530-7823-004
for 7870, length 142 cm, 2½” 5530-7823-003
for 7880-7890, length 122 cm, 2” 5530-7823-000
Mounting bracket for fastening board below feed barrier, without
bolts
2½” 5530-9630-004
2” 5530-9630-003
Mounting brackets
Standard set of mounting brackets (upper and lower bracket) 325
cm centre to centre
for 2” tube 5530-7822-000
for 2½” tube 5530-7822-003
for 3” tube 5530-7872-010
Feed barriers for fattening stock and bulls 01-05-2010
The feed barrier bars of the English feed barrier have been designed so
that they cannot turn in the H-sections and can be shortened on site to the
indicated minimum length. A simple securing system ensures that the feed
barrier bars can be easily installed and removed.
H-sections
The H-sections have been pre-treated to accomodate:
• A height-adjustable lower bar, neck bar and retaining bar.
• (Pivoted) intermediate barriers.
• A drinker. Hinge at tthe top Hinge at the bottom Lock at the top Lock at the bottom
Self-locking feed barrier

For catching cows, which are usually accommodated in stalls, a self-loc-
king feed barrier is required, also and in particular for safe treatment. The
heavy-duty, large self-locking feed barrier has been developed to be used
for a wide variety of breeds and ages.
Prices on demand.
Hinge Lock support post Lock wall
Double lock Hinge and lock Double hinge
Single lock Single hinge
Portable sliding grouping barrier
Double routing gate
Screw-on support post Routing gate element
22 Tel. 0031-58-2911129
01-05-2010
Accessories for feed barriers
Hinges and locks Model
Hardware set for Locks® feed barriers, consisting of hinge
elements, locking pieces and locking pin, including board fitting
brackets
for Locks® barriers 5530-7706-017
for 7340 and 7350 5530-7706-016
for 7360 5530-7702-015
Support wheel
for Locks® barriers 5530-7333-001
for 7360 5530-7733-003
Hardware set for self-locking feed barriers model 7800, consis-
ting of two hinges and two locks at choice, including board fitting
brackets, without support wheel Support post extension Clamping sleeve Folding-up head bar
5530-7806-001
Set of universal hardware for feed barriers
double lock to support post Renovation support posts Model
hinge and lock to support post Support post extension, 15 cm long, without bolt, hot-dip galva-
double hinge to support post nised
single lock to support post for flat upper side 5530-7185-002
single hinge to support post 5530-7838-010 (not shown) for round upper side 5530-7185-001
Set of two clamping brackets with hinge plate for 2½” support Thick-walled clamping sleeve to repair support posts attacked
post by rust
complete with hinge part and pin 5550-7212-019 length 42 cm, for 2” buis 5530-1990-002
without hinge part and pin 5550-7727-000 length 60 cm, for 2½” buis 5530-1990-000
Cross-over lockers
Cross-over lockers Cross-over locker for easily locking gates across the feed alley
single, for 7800 and 7212 5550-7113-000
double, for 7800 and 7212 5550-7113-001
single, for 7300 5550-7114-000
single double, for 7300 5550-7114-002
Folding-up head bar
Hinge bracket for head bar (1 per 3 feed openings and 1 per
row, for fitting gate elements 2 hinge brackets are required)
for 7800/40/50/60, 1”
(2 per 325 cm) for 7300, ½” 5530-7802-003
double 5530-7802-002
Set of clamping brackets
1” head bar, per length of 600 cm 5510-8511-001
Grouping area barriers

Grouping area barriers Model The grouping area barriers model 7200 are suitable for a grid scraper.
Provided standard with walk-through opening. Hinged and quickly mova-
Portable sliding grouping barrier, with lock and hinge, for interme-
diate spaces of 260-325 cm ble.
to cubicle - cubicle, 1½” 5550-7200-010
to cubicle - cubicle, 2” 5550-7200-011 The routing gate which serves to prevent stock from walking back is espe-
to cubicle - self-locking feed barrier 5550-7200-012 cially suited to create a closed off space for an automatic milking system,
to cubicle - diagonal bar feed barrier 5550-7200-013 which can only be exited via the robot milker. Provided with double, noise-
to cubicle - Tip-Top barrier 5550-7200-014 reducing sound-damping gate turning bars.
Portable sliding grouping barrier, with lock and hinge, for interme-
diate spaces of 300-355 cm A self-locking gate locks the return passage in the milking parlour. The
to cubicle - cubicle, 1½” 5550-7200-021
wall hinge strip is screwed to the wall slightly inclined by means of through
to cubicle - cubicle, 2” 5550-7200-022
to cubicle - self-locking feed barrier 5550-7200-023 bolts. The special, inclined position of the hinges ensures that when ope-
to cubicle - diagonal bar feed barrier 5550-7200-024 ned the gate automatically closes again.
to cubicle - Tip-Top feed barrier 5550-7200-025
Routing gate
Self-locking gate
Double routing gate, for a manure passage width from 200 to 250
cm, incl. length-adjustable side fastenings
for fastening to 1½” tube 5550-7230-010
for fastening to 2” tube 5550-7230-011
Routing gate element, incl. threaded straps, for fitting to 2½”
support post 5550-7230-004
Screw-on support posts
Srew-on support post 2½” (76 mm ø) with foot plate, counter
profiles and cap screws, for fitting support posts on grid floor, 150
cm long 85 cm
without grid lockers 5550-7822-002
with grid lockers 5550-7822-008
Separate counter profile, 150 cm long 5550-1925-001
Cap screw 12 mm, 200 mm long 5500-1213-004
Self-locking gate
Self-locking gate, suitable for passages up to 110 cm wide 5550-7240-000
Grouping area barriers 01-05-2010
The model 7213 grouping area barriers are available, with the application
of extension and attaching parts, in various versions. For a hold area bar-
rier you need one grouping barrier, one hinge and one lock. A tilting gate
consists of one grouping barrier, one tilting unit short and one tilting unit
long with counter weight (for barriers up to and including 345 cm long). For
a slidinig barrier you need two grouping barriers (at least 100 cm overlap),
one set of guiding brackets, one hinge and two locks. The portable sliding
barriers consist of one grouping barrier and one set of grid lockers.
Grouping barriers 98 cm high Model Grouping barriers 79 cm high Model

Grouping barrier 98 cm high, hot dip galvanised, for stock from Grouping barrier 79 cm high, hot dip galvanised, for dairy cattle,
approx. 8 months, can be shortened 45 cm maximally can be shortened 45 cm maximally, suited for barns with manure
removing robots
length 140 cm 5550-4295-000 length 140 cm
with additional vertical, length 370 cm 5550-4295-007 with additional vertical, length 370 cm
Hinges and locks for 98 cm barrier height Hinges and lock for 79 cm barrier height
Hinge for 98 cm barrier height Hinge for 79 cm barrier height
to wall 5550-7213-048 to wall
to front of cubicle (1½” tube) 5550-7213-071 to front of cubicle (1½” tube)
to front of cubicle (2'’ tube) 5550-7213-073 to front of cubicle (2'’ tube)
to rear of cubicle (1½” tube) 5550-7213-074 to rear of cubicle (1½” tube)
to rear of cubicle (2” tube) to rear of cubicle (2” tube)
Hinge set by means of clamp 9628 with bolt 5510-9628-011 Hinge set by means of clamp 9628 with bolt
Lock for 98 cm barrier height Lock for 79 cm barrier height
to self-locking feed barrier (wall) 5550-7213-051 to self-locking feed barrier (wall)
to self-locking feed barrier (boards 5550-7213-052 to self-locking feed barrier (boards)
to wall 5550-7213-053 to wall)
to rear of cubicle (2” tube) 5550-7213-076 to rear of cubicle (2” tube)
to front of cubicle (2” tube) 5550-7213-078 to front of cubicle (2” tube)
Set of universal hardware for grouping area barriers Set of universal hardware for grouping area barriers
single lock to support post 5550-7213-014 single lock to support post
double lock to support post 5550-7213-015 double lock to support post
hinge and lock to support post 5550-7213-016 hinge and lock to support post
double hinge to support post 5550-7213-017 double hinge to support post
single hinge to support post 5550-7213-018 single hinge to support post
Accessories tilting gate for 98 cm barrier height Accessories tilting gate for 79 cm barrier height
Tilting unit short Tilting unit short
to front of cubicle, 2” 5550-7213-054 to front of cubicle, 2”
to wall and support post, 2½” 5550-7213-060 to wall and support post, 2½”
to rear of cubicle, 1½” 5550-7213-063 to rear of cubicle, 1½”
to rear of cubicle, 2” 5550-7213-064 to rear of cubicle, 2”
Tilting unit long, with counter weight Tilting unit long, with counter weight
to feed barrier 7300 5550-7213-055 to feed barrier 7300
to self-locking feed barrier (wall) 5550-7213-056 to self-locking feed barrier (wall)
to self-locking feed barrier (boards) 5550-7213-057 to self-locking feed barrier (boards)
to diagonal bar feed barrier (boards) 5550-7213-059 to diagonal bar feed barrier (boards)
to wall and support post, 2½” 5550-7213-061 to wall and support post, 2½”
to rear of cubicle, 1½” 5550-7213-065 to rear of cubicle, 1½”
to rear of cubicle, 2” 5550-7213-066 to rear of cubicle, 2”
24 Tel. 0031-58-2911129
01-05-2010
Grouping area barriers
Telescopic grouping area barriers Model
Telescopic barrier, height 98 cm, with adjustable hinge, 7213.08,
incl. pen lock and locking loop
telescopic from 200 to 300 cm 5550-7213-021
Pen locks
Pen lock for grouping area barriers of 98 cm high
lock for 2½” tube 5550-7213-041
New! lock for 3” tube 5550-7213-042
hinge for 2½” tube 5550-7213-043
hinge for 3” tube 5550-7213-044
locking loop wihout parts 5550-7212-005
Telescopic grouping area barrier Pen lock for seperating barriers 7665, 109 cm high
lock for 2½” tube 5550-7675-016
hinge to wall 5550-7675-021
Support wheel
Universal support wheel with pneumatic tyre (specifically for sup-
New! port over a slatted floor) 5550-7219-006
Separating barriers
Separating barrier, 109 cm high, space between the verticals 9,8
cm (12,5 cm centre to centre), upper and lower bar 1½” (48 mm
ø), verticals ¾” (27 mm ø)
without drinker opening, 150 cm 5550-4294-004
Hinge pen lock without drinker opening, 275 cm 5550-4294-007
with drinker opening, 250 cm 5550-4294-006
Lock pen lock Support wheel with drinker opening, 350 cm 5550-4294-011
5550-7213-014 5550-7213-015 5550-7213-016 5500-7213-017 5500-7213-018
Housing systems for horses 01-05-2010
Brouwers Equipment supplies a wide range of horse boxes, outside

stables, jumping materials, drinking systems and accessories. As for the
horse boxes we notice a trend in using synthetic materials, especially for
the new series of horse boxes. The used material almost looks natural, as
wooden planks, but the difference is that thes planks are made of mainte-
nance free synthetic.
Horse boxes
The standard horse boxes can be equipped with synthetic or hardwood
planks. The boxes are galvanised an/or provided with an additional pow-
der coating. The grating is made of vertical bars c/c 80 mm and is 1050
mm high. The finishing is galvanised. Besides the standard horse boxes,
Brouwers Equipment also delivers made-to-measure horse boxes.
Horse box panels

Can be supplied with a front panel with sliding door. The sliding doors can
be equipped with filling planks from hardwood or synthetic material, in
the colours brown, green or black. They are equipped with vertical bars,
lockable feed opening, revolving door or entirely closed. The intermediate
panels can be equipped with filling planks from hardwood or synthetic ma-
terial, in the colours brown, green or black. You can choose between an
entirely closed intermediate panel or a panel partly equipped with fencing.
Measurements horse boxes

• Total height boxes: 2250 mm.
• Height synthetic or woord: 1500 mm.
• Height grating: 1050 mm.
• Width door: 1300 mm.
• Total height door at top of grating: 2250 mm.
•
Prices, extra accessories and/or special boxes on demand.
Euro calf pens
Drinking systems Model

Drinker for fitting to wall, bottom-connected, without coupling
0066.HZKSY
Feeders
Feeder, wall model 4070.VBWA
Hayrack
Hayrack, wall mounted, hot dip galvanised, dim. 85 x 48 x 59 cm
4071.HR083
The Brouwers Euro calf pens are available with two different kinds of
partitions: solid impact-proof PVCU (18 mm thick) or waterproof lami-
nated wood with an aluminium frame. Both pens have a removable and
revolving front barrier and a hardwood slatted floor. Equipped with a wheel
assembly, the pens can be wheeled out individually so that the livestock
dealer and carrier do not have to get inside. The version with roof is a
good alternative to the igloo hut. The calf then has a comfortable, dry
Drinker Feeder, wall model Hayrack straw bedding, because the liquid manure is drained off through the floor.
26 Tel. 0031-58-2911129
01-05-2010
Euro calf pens
Euro calf pens Model

Revolving front barrier, width 86 cm 5550-7685-001
Upright for rear panel 5550-7684-000
Partition
end partition PVCU 5550-7686-005
central partition PVCU 5550-7686-006
end partition laminated wood 5550-7656-002
central partition laminated woord 5550-7656-003
Rear panel including fastening items
PVCU 5550-7687-007
laminated wood 5550-7657-001
Hardwood slatted floor of planed Azobe 5550-7659-000
Angle iron with bolts, for fixing partition to wall 5550-7658-002
Sliding roof
Polyester sliding roof, 160 cm long, with top extension for rear
panel 5550-7675-018
Top extension for partition, including guides
for end partition PVCU 5550-7690-005
for central partition PVCU 5550-7690-006
for end partition laminated wood 5550-7677-005
for central partition laminated wood 5550-7677-006
Mobile underframe
Wheel assembly, for making one calf pen movable 5550-7682-004
Dolly for moving one calf pen 5550-7682-000
Accessories for feeding
Double bucket holder with bucket clamp for fixing on top or
underneath 5550-7681-000
PVCU 12 litre calf bucket 5580-2755-000
Stainless steel concentrates bowl 5530-2223-000
PVCU self-feeder
with plate for wall-mounting 5530-2225-000
for placement in bucket holder 5530-2225-001
Separate teat 5580-2748-000
Hayrack
for PVCU partition 5550-7652-001
Self-feeder Calf bucket Concentrates bowl
for woorden partition 5550-7652-000
Partitions for tying stalls 01-05-2010
All partitions are hot-dip galvanised. The lengths mentioned include 20

cm cement-in. For the height of she stall you should subtract 20 cm of the
linear measurement.
The neck bows give freedom of movement to the cows when lying down
and standing up. Standing cows are forced to place their hind legs on the
edge of the dung channel, which prevents the stands from being fouled.
The neck bows can be individually adjusted for each cow.
Support posts and h-partitions Model

Support post 2”, with PVC sleeve, 230 cm long 5550-8702-001
h-partition, 2” x 1½”, wit PVC sleevesk dim. 220 x 110 x 60 cm 5550-1200-004
End-h-partition 2” x 1½”, with PVC sleeves, dim. 230 x 110 x 100
cm 5550-8752-000
Universal beam fork for 2” tube 5550-8735-000
Separate end-plate 5550-8736-000
Stall partition
U-partition 110 x 60 cm, with PVC sleeves 5550-3106-000
Beam fork End-plate End partition 110 x 100 cm, with intermediate tube, with PVC
sleeves 5550-3111-000
Hairpin partition 110 x 33 cm, with intermediate bars and rings,
with PVC sleeves 5550-8861-000
Tube bushes
Tube bush
for 1½” tube, 22 cm long 5550-8780-000
for 2” tube, 22 cm long 5550-8784-000
for 2½” tube, 32 cm long 5550-8785-000
Neck bows
Neck bow complete 5550-9600-001
Neck bow 1½”, hot-dip galvanised, for cows 5550-3173-000
Support post 2”, with PVC sleeve (2 per stand) 5550-9605-000
Support post h-partition End-h-partition Tube clamp 2” x 1½” (2 per stand) 5510-9625-002
Nylon cow collar 135 cm 5510-2017-002
Hot-dip galvanised link buckle 5580-2045-000
Double cow chain, 40 cm long 5580-2025-000
Ring 10 x 80 mm (2 per stand) 5500-8000-181
Bow shackle 10 mm (2 per stand) 5580-4110-004
Chain positioner 2” (2 per stand) 5550-2028-000
PVC stopper 2” (2 per stand) 5500-8007-002
Dung grids
Dung grid 12 mm ø patterned steel, hot-dip galvanised, with
U-partition End partition Hairpin partition recessed bars, supports 33 cm between centres, dung passage
width 36-38 mm, grid height 40 mm
dimensions 149,5 x 79,5 cm 5510-3535-008
Neck bow dimensions 99,5 x 79,5 cm 5510-3535-006
dimensions 49,5 x 79,5 cm 5510-3535-016
dimensions 99,5 x 99,5 cm 5510-3535-007
Cow collar dimensions 49,5 x 99,5 cm 5510-3535-005
PVC stopper Dung grid with five rubber-coated bars
dimensions 99,5 x 79,5 cm 5510-3535-010
dimensions 49,5 x 79,5 cm 5510-3535-021
Tube clamp dimensions 99,5 x 99,5 cm 5510-3535-011
dimensions 49,5 x 99,5 cm 5510-3535-022
Cow chain Rubber mats
100 Dung grid
Rubber mat with straight continuous antiskid profile, 17 mm thick,
Ring weitht approx. 20 kg/m² (delivery ex works)
width 110 cm, length 200 cm 5520-0021-000
Chain positioner
Support post width 100 cm, length 200 cm 5520-0020-000
69 width 100 cm, length 150 cm 5520-0015-000
Coach screw 8 x 60 mm (3 per mat) 5500-1211-005
Plastic plug (3 per mat) 5500-1218-003
Neck bow Rubber mat Stainless steel washer (3 per mat) 5500-1221-004
28 Tel. 0031-58-2911129
01-05-2010
Suspended chains and nylon strap ties
15 15 The Brouwers suspended chains and nylon strap ties all are of an excel-
3 3
lent quality. the green nylon bands are tightly woven and have wear-
resistant sides of even stronger white nylon. There is a large choice of
stanchions. The tying systems can be delivered in each desired length. In
order to determine the necessary length, you measure the height of the
Adjustable ceiling fasteners
stall and add 10 cm.
Nylon strap ties and syspended chains Model

Green nylon band with white wear-resistant sides, above a
triangle with 7 links, under a ring with 2 links
length 170 cm 5510-9066-000
Stanchion Single floor anchor Adjustable floor anchor length 182 cm 5510-6010-000
length 190 cm 5510-9066-002
length 200 cm 5510-9066-003
Suspended cahain with straight links, length 182 cm 5510-6080-000
Stanchions
Stanchion for 9060, for cows 5580-9093-000
Stanchion with nine rings and flat connecting links, for fattening
stock 5510-9099-001
Fastening material
Adjustable ceiling fastener
with bow shackle 5510-9200-001
wit C-hook 5550-5120-000
Single floor anchor, material above hole 27 x 17 mm, height 14
cm 5580-4153-000
9143 9143.6
Adjustable floor anchor, material above holes 28 x 18 mm,
height 14 cm 5580-4153-001
Safety fastener 5510-9143-000
Safety fastener for tubes
1½” 5510-9143-002
2” 5510-9143-007
C-hook 5510-9141-000
Upper chain 7 mm, per metre 5510-9144-000
Bow shackle 10 mm 5580-4110-004
9066 Stanchion for fattening stock C-hook Bow shackle
Water troughs 01-05-2010
There are several options to connect the water troughs. The troughs can
be connected directly to the water by means of a 3/8” float valve. When
using a communicating system a main reservoir with float valve in the mil-
king parlour is connected to the water mains. The troughs are connected
to the main reservoir by means of a service pipe. In a circulation system
the troughs are additionally interconnected through return pipes, while the
last trough is connected directly to the main reservoir. A circulation pump
is placed at the end of the return pipe before the main reservoir.
On trough of 200 cm is sufficient for approx. 25 cows, a trough of 100 cm

for approx. 15 cows, while a round drinker will do for approx. 10 cows.
Float valve for waterworks Float valve for own water supply
Straight troughs Model

Straight drinking trough with PVC screw cap for draining and
guard
with float valve 2910.K, length 100 cm 5540-2900-002
with float valve 2910.K, length 200 cm 5540-2900-006
with float valve 2910.B, length 100 cm 5540-2900-003
with float valve 2910.B, length 200 cm 5540-2900-007
Straight drinking trough without float valve, with PVC screw cap
for draining and 50 mm hose socket
length 100 cm 5540-2901-000
Splash screen length 200 cm 5540-2901-002
half-open
Straight main reservoir with PVC screw cap for draining and 50
mm hose socket, length 100 cm
with KIWA-aproved float valve 3/8” 5540-2902-000
with float valve 3/4” 5540-2902-001
Additional charge per reservoir for extra 50 mm PVC hose socket
instead of screw cap for draining
Hot-dip galvanised splash screen (in the troughs six holes must
Straight drinking trough be drilled for fitting)
with half-open sides, 100 cm 5540-2908-008
with fully closed sides, 100 cm 5540-2908-009
with half-open sides, 200 cm 5540-2908-010
with fully closed sides, 200 cm 5540-2908-011
Splash screen Inclined troughs
fully closed Hot-dip galvanised inclined drinking trough including splash
screen, without float valve, with 50 mm PVC hose socket and
drain, length 85 cm, width 42 cm, depth 33 cm, to be fitted to/
between cubicle partitions of 100 to 120 cm c.t.c.
for fitting to model-R cubicle partitions
for fitting to English cubicle partitions 5540-2905-003
5540-2905-001
Round drinkers
Hot-dip galvanised round drinker with reinforced rounded edge,
without float valve, with 50 mm PVC hose socket and drain,
height 40 cm, to be fitted to front of feed barrier, cubicle or wall
without brackets, for fitting to wall 5540-2904-001
with 1½” brackets 5540-2904-002
with 2” brackets 5540-2904-003
with 2½” brackets 5540-2904-004
Polypropylene troughs
Polypropylene main reservoir with 3/8” KIWA-approved float
valve, 50 mm PVC hose socket and cover
Inclined drinking trough Round drinker 80 x 40 x 41 cm, capacity 100 litres 5540-2906-009
80 x 60 x 55 cm, capacity 200 litres 5540-2906-010
Separate components Model Polypropylene reservoir as central float chamber in pig houses,
with 1” gas thread outlet, 3/8” KIWA-approved float valve and
3/8” KIWA-approved float valve (capacity 450 litres per hour),
cover
only for connection to waterworks 5540-2910-003
80 x 40 x 41 cm, capacity 100 liter 5540-2906-011
3/8” float valva (capacity 1.500 litres per hour), for own water supply, 80 x 60 x 55 cm, capacity 200 liter 5540-2906-012
including plastic float valve ball 130 x 165 cm 5540-2910-000
Set of brackets for polypropylene trough 100 or 200 litres 5540-2906-005
Guard for 3/8” float valve 5540-2913-000
1/2” float valve with protective cover, for round drinkers 5540-3101-007
3/4” float valve with PVC float
with mounting plate 5540-2911-008
1” low-pressure float valve for connection to precooler, including
mounting plate 5540-2912-003
50 mm PVC hose socket 5540-2913-003
PVC screw cap for drain 5540-2913-010
Hot-dip galvanised tube clamp 1½” x 1½”, for fitting drinkers to
tubes (horizontal or vertical) or to wall 5510-9624-001
PVC spriral hose, internal diameter 50 mm, per metre 5540-2915-000
Hose clip 60 mm, for PVC hose 5540-2916-000
Polypropylene trough
30 Tel. 0031-58-2911129
01-05-2010
Quick Fresh drinker
• Drinker declining towards the outlet for an efficient discharge of dirty
water.
• Large outlet with manually operated slide seal for dry operation.
• Provided with an anti-slop edge all-around.
• With a float valve 40 litres/min, connection R ¾”.
Quick Fresh drinker Model

Quick Fresh drinker stainless steel 1 metre
fixed to stands 5540-2940-003
New! fixed to a wall 5540-2940-002
fixed between support posts 5540-2940-010
Quick Fresh drinker stainless steel 2 metres
fixed to stands 5540-2940-007
fixed to a wall 5540-2940-005
fixed between support posts 5540-2940-006
Thermo drinkers
The thermo drinkers for cattle keep the water cool in summer and flowing
in winter, without using electricity. Their simple construction, with few
moving parts and extra insulation, reduces the risk of defects and freeze-
ups. The thermo drinkers are made from strong polyethylene, preventing
leakage and keeping the water fresh and free-flowing also under extreme
weather conditions.
Thermo drinkers Model

Thero drinker for cattle
with 1 shut-off baal, dim. 70 x 50 x 48 cm 5540-2909-002
with 2 shut-off balls, dim. 107 x 63 x 48 cm 5540-2909-055
Thermo watermaster
Durable construction of double-walled UV-resistant polyethylene, filled
with urethane foam for insulation. Equipped with large-capacity float valve
(4.500 litres/hour at 3,5 bar). Supplies the water faster than the cows can
drink it. Fast emptying opening. Float chamber sealed off by means of a
patented sealing system, without using rubber seals subject to wear. Long
life, no corrosion.
Thermo watermaster Model

Thermo watermaster with float valve 5.000 litres/hour
dim. 137 x 84 x 56 cm 5540-2909-063
dim. 229 x 84 x 56 cm 5540-2909-065
dim. 183 x 61 x 61 cm 5540-2909-064
dim. 366 x 61 x 61 cm 5540-2909-032
Thermo watermatic with float valve 1.300 litres/hour
dim. 85 x 46 x 56 cm 5540-2909-001
dim. 91 x 55 x 66 cm 5540-2909-057
Heating element 250 Watt, with built-in thermostat, for all models 5540-2909-058
Spare parts for drinking bowls 01-05-2010
On this page you will find spare Spare parts for cattle drinkers Model
parts of the present generation Valve casing 5500-0121-000
of drinking bowls. For most of the
Valve pin with rubber and nut length 88 mm, bag 10 pieces 5540-0122-000
older models there are also still
Valve rubber, bag with 10 pieces 5540-0123-000
spare parts available. The model
numbers of the Brouwers drinking Valve spring, bag with 10 pieces 5540-0124-000
bowls are cast in the bowls. Always Spring tightening nut
check the model number before high pressure 5540-0126-000
low pressure 5540-0127-000
ordering spare parts.
Gasket ring 5500-0131-000
Don’t drive the spring tightening nut Synthetic seal cap for valve hole in drinking bowl 5500-0145-000
too deep into the valve. The upper Complete valve 5540-0113-001
turn should just be visible. Complete valve with synthetic pusher and coupling
for bottom connecting 5540-0113-006
for top connection 5540-0114-002
Valve spanner 5540-0140-000
0131-000 0116-001
Pusher with axle
synthetic 5540-0143-000
0126-000
0127-000
(only for bottom connecting) cast-iron 5540-0081-001
0116-000 Axle complete, length 60 mm 5505-0156-001
Spare parts for pig drinkers
0124-000 Valve casing including brass coupling piece ¾” 5540-0116-002
O-ring 5500-0116-004
0116-002 Pushing pin
length 55 mm, for model 45 5500-0116-007
0123-000 length 85 mm, for model 46 5500-0116-003
Stainless steel pushing spring, length 50 mm 5500-0116-002
0116-007 Dirt catcher 5505-0116-000
0116-003
Regulator for adjustment of the water pressure 5500-0116-001
Complete valve
0122-000 with short pin, for model 45 5540-0116-000
with long pin, for model 46 5540-0116-001
0116-004
Complete valve with coupling
with short pin, for model 45 5540-0116-012
with long pin, for model 46 5540-0116-014
Fastening items and couplings
Fastening nut 5500-0132-000
Sealing ring, bag with 10 pieces 5540-0133-000
S-shaped coupling, incl. sealing ring
15 mm 5540-0134-000
0121-000 0116-002 ½” 5540-0138-002
Cattle drinker
Straight coupling, incl. sealing ring
frog 15 mm + swivel nut ¾” 5540-0158-000
frog ½” + swivel nut ¾” 5540-0159-000
Cattle drinkers Pig drinkersl
thylene 16 mm + swivel nut ¾” 5540-0120-003
Frog incl. sealing ring
15 mm 5540-0136-000
½” 5540-0135-000
Swivel nut ¾” 5500-0137-000
0143-000 0081-001
Pushers
0134-000
0137-000 Drinking bowls and nipple drinkers Pig drinker Piglet drinker
0138-002
The Brouwers drinking bowls are made from solid cast-iron, enamelled
twice. The form of the bowls prevents spilling of water. The inside of the
0135-000 0136-000
bowl is smoothly finished, which reduces the possibility of dirt deposition.
0133-000
Following a process of research and regular checks by KIWA, the Brou-
0132-000 wers automatic drinkers comply with the KIWA assessment guideline 634
Fastening items and couplings “cattle drinkers”. Each drinker is tested before delivery.
Valve for building in
Drinker with float valve
32 Tel. 0031-58-2911129
01-05-2010
Roll-over stainless steel drinking troughs
Cows produce more milk when they can drink plenty of tasty water. Their
trough should therefore be free of alga and other polution. The trough
has to be cleaned on a regular basis, which is quite easy to do with a
stainless steel roll-over drinking trough. The water connections are not
liable to wear, which reduces the possibility of leakage. The arms are
charged equally during emptying, operation without effort. The troughs are
easily adjustable in height, by means of two bolts. No hinge points, but an
always freely rolling movement. A circulation system is possible by means
of two connections.
Roll-over stainless steel drinking troughs Model

Roll-over drinking trough for communicating system
capacity 100 litres 5540-2921-003
for connection to a wall, capacity 100 litres 5540-2921-004
Roll-over drinking trough with float valve
between posts 123 cm c.t.c., capacity 100 litres 5540-2920-012
between posts 223 cm c.t.c., capacity 200 litres 5540-2920-008
Frost protector
Additional price for frost protector 5540-2925-015
Drinking bowls and nipple drinkers

Cattle drinkers Model
Cattle drinker for fitting to wall, with synthetic pusher
½” thread, top-connected 5540-0066-012
15 mm copper, top-connected 5540-0066-008
16 mm thylene, top-connected 5540-0066-011
½” thread, bottom-connected 5540-0066-000
15 mm copper, bottom-connected 5540-0066-009
Additional charge cast-iron pusher for horses (only suitable for
connection at the bottom)
Set of drinker brackets for fitting cattle drinkers to a tube Stainless steel drinker Stainless steel duo-drinker
1½” (ø 48,0 mm) 5540-0082-013
2” (ø 60,3 mm) 5540-0082-000
2½” (ø 76,0 mm) 5540-0082-005
3” (ø 89,0 mm) 5540-0082-006 Circulation unit
3½” (ø 101,0 mm) 5540-0082-008
4” (ø 114,0 mm) 5540-0082-011
Pig drinkers Stainless steel drinker Model
Drinking bowl with synthetic valve, high or low pressure, incl. ½” Stainless steel drinker with weight-operated seal, max. capacity
coupling (also available with 15 mm copper coupling or 16 mm 30 l/min at 5 bar (15 to 20 milk cows per drinker) 5540-2918-000
thylene coupling) Stainless steel duo-drinker with pushers and weight-operated
for pigs, depth 16 cm 5540-0045-003 seal (30 to 40 milk cows per drinker) 5540-2918-004
for piglets, depth 11 cm 5540-0046-002
Threaded strap M10 x 84 for pipe connection 1½” or 2” (4
Valve for building in, high or low pressure, without lock nut and pieces per drinker) 5500-9660-032
coupling, for fitting in existing drinkers model 40, with stainless
Circulation unit with additional heating, consisting of: circulation
steel cover 5540-0100-001
pump (3 positions) approx. maximum pipe length 200 metres,
Drinker with float valve heating spiral, thermostat, on/off switch, overflow valve and 1
Drinker with float valve, black enamelled cast-iron with stainless meter of connection cable, the whole mounted on a stainless
steel cover and ½” connection at the right 5540-3684-000 steel plate
Fastening bracket 3000 Watt, 230 V 5540-3166-000
for 1½” tube 5540-0083-000 3000 Watt, 400 V 5540-2919-001
for 2” tube 5540-0083-001 Nipple drinkers
Stainless steel bite nipple, with adjustable water flow
for pigs < 25 kg, 3/8”, connection ½” 5540-2182-000
for pigs < 75 kg, 1/2”, connecting ½” 5540-2182-001
for pigs > 50 kg, 3/4”, connection ¾” 5540-2182-002
2182 Hot-dip galvanised cast-iron fastening support, holes 62 mm
centre to centre, ½” threaded top connection
for nipples 1/2” to wall 5540-2188-001
2183 for nipples 3/4” to wall 5540-2188-000
for nipples 3/4” to 1¼” or 1½” tube 5540-2188-002
Push nipple ½” for wet feeder 5540-2184-000
Spraying nipple ½” for fattening hogs and sows, with adjustable
2184 water flow 5540-2183-000
Nipple drinker for cattle, high pressure, with adjustable water
flow
for calves from 0-6 months, ½” 5540-2185-000
2185
for young stock and fattening stock, ¾” 5540-2185-001
Grid scraper system 01-05-2010
The grid scraper consists of a fully closed hot-dip galvanised frame with
a soft rubber cleaning strip (vertical PU-rubber 6 mm, projecting ± 3 cm),
which automatically adjusts to the right operating position for both directi-
ons. The system operates like a large squeegee and is self-cleaning. The
extra scrapers for the rear edge of the cubicles are fully width-adjustable.
Advantages Brouwers grid scrapers

• Flexible side scrapers, ensuring that less manure is carried along the
end of the passage.
• Self-cleaning construction.
• Flexible rubber cleaning strips.
• Works as a “squeegee”.
• Hot-dip galvanised.
There are various drive systems, which ensure a clever solution for all
barns.
Steel cable
This system is inexpensive, easy to build in and very compact. Normally to
be used for two passages with two grid scrapers.
Chain - steel cable combination

This system is especially interesting for facilities where more than three
scrapers are to be driven (for example when using a robot milker dividing
the passages in the centre). Then only a chain will be used for the section
that has to run via the drive, while a plastic-coated steel cable is used
along the back.
Polyester rope
This system is pre-eminently suited for passages of different length or
even three passages. Application of the rope-based system has the fol-
lowing important advantages:
• The long service life of the rope (18 mm polyester compound, with a
breaking strength of 5.500 kg), together with the good repair and shorte-
ning possibilities.
• Exceptionally cow-friendly.
• Self-adjusting, no tightening necessary, so less maintenance.
• Motors only 0,37 kW, geared to the actual load, which makes adjuste-
ment safer.
• Low scraper speed. For 1 45-metre barn 3,5 meter per minute maxi-
mally.
Hydraulic sliding rod

These systems can be relatively simple built-in in existing facilities, without
requiring drastic structural alterations. The hydraulic sliding rod system is
ideally suited for facilities with many relatively short passages, no matter
whether there is an even or uneven number of passages. This system has
the following outstanding advantages:
• Well-rounded off rail, double-bent, for increased stiffness.
• Standard with switching off timer.
• Cleaning frequency adjustable per passage.
• Number of cylinder strokes adjustable per passage (maximum protec-
tion or only stroke setting).
• Failure detection per passage. In the event of a scraper failure in a pas-
sage, the scrapers in the other passages continue to operate normally.
• Short damped cylinders.
• Few electronic components in cylinder assembly.
34 Tel. 0031-58-2911129
01-05-2010
Grid scraper system
corner wheel scraper
Grid scraper system with steel cable drive Model
300
Drive unit on vertical frame, to be supported to the wall, incl.
level=0 guard, fully closed three-phase motor 0,25 kW, 230/400 V, 50 hz,
440
220
attached gear box, traction sheave, two steel cable sheaves and
automatic tensioned 5505-5504-015
drive system fitted to mounting post 220
Switch box, to be connected to 3 x 400 V, 50 hz, automatic start
Steel cable by means of a built-in timer, built-in working hours counter, to be
shut of by a special current measuring relay with a digital reading
of the absorbed current, so you can read out how heavy the
installation is running and adjust the shut down value somewhat
drive system including tensioner 220
higher 5560-5513-001
chain 220
Grid scraper of hot-dip galvanised steel, incl. anti-swing profile,
level=0 220
pulling block for steel cable, tensioner and rubber side scrapers
cable 300
for manure passage 200 cm 5560-5515-016
300
level=0 220
220
220 for manure passage 375 cm 5560-5515-037
Chain - steel cable combination
Corner wheel in frame, with steel cable sheave 5560-5508-001
Guide profile to be placed at crossings etc. including fastening
corner wheel
scraper
items 5560-5520-002 Drive unit steel cable
Meter of 9 mm steel cable, with coating, flexible version, with
high breaking strength
made to measure 5560-5525-002
scraper reel drive on a roll of 500 metres 5560-5525-003
Mounting set for fastening steel cable to universal pulling block
5560-5515-000
Polyester rope
Drive pulley 5589-5430-003
switch box + hydraulic pump

sliding rod scraper
300
level=0
440
220
cylinder assembly on grid floor 220
Hydraulic sliding rod
Grid scraper system with rope drive Model

Hot-dip galvanised reel-type drive unit fitted to mounting post,
frame to be supported to wall, incl. guards and 0,37 kW motor 125
with chain drive
with square corner wheel (as shown) 5560-5550-045
with corner wheel parallel to wall (not illustrated) 5560-5550-052
30
Rear plate for drive unit (in situations where the drive unit cannot
be placed against a sufficiently high wall) Drive unit chain - steel cable
top plate, height 137 cm 5560-5550-010 Section grid scraper
bottom plate, height 125 cm 5560-5550-014
Switch box of synthetic material, control through current measu-
ring relay with automatic switch for automatic control with timer,
including main switch, thermal cut-out and manual operation
for rope driven scrapers on grid floors
for rope driven scrapers on solid floors 5560-5513-008
5560-5513-014
Grid scraper of hot-dip galvanised steel, incl. anti-swing profile,
pulling block for polyethylene rope and rubber side scrapers
Drive unit hydraulic sliding rod
Guiding profile, to be placed at crossings etc., including fastening
items 5560-5520-002
Meter of 18 mm polyethylene rope 5560-5554-000
Corner wheel in frame for rope, incl. fasteners 5560-5553-005
Separate corner wheel
for rope drive 5589-5412-007
for steel cable drive 5589-5412-003 Drive unit polyester rope
Manure removal systems 01-05-2010
We provide a high-quality and efficient manure removal system for every

kind of cubicle stall or feed cubicle stall. The heart of the system is the
specially designed drive group. The cast steel corner wheels are provi-
ded with double waterproof and greased ball bearings. The highly wear
resistant 10 mm steel chain has a breaking strength of 5.800 kg. For every
installation you can count on ample advice and detailed drawings.
Investing in Brouwers manure removing equipment is opting for reliability

based on 30 years’experience. Advantages:
• No slurry storage in the barn (better barn climate).
• Slurry mixed outside the barn.
• Lower building costs.
• Cows can be given straw beddings.
• Possibility of separate slurry storage.
Features folding scrapers

• Smoothly running.
• Adequate cleaning through pinching and scraping effect.
• Capable of handling straw of any size.
• Less disturbance for cattle, because the scraper blades are placed at
an angle and practically fully fold up in the return run.
• Optional with rubber strips for even better cleaning.
• Blades follow the floor independently of each other.
Features combi scrapers

• Operating run starts immediately.
• Hinged side blades ensure optimum cleaning of sides of passage.
• Tilting blades follow the floor independently of each other.
• Suitable for flat as well as sloping floors.
• Standard with soft rubber cleaning strips.
• Effective and efficient cleaning.
• Not for unchopped straw.
Low-emission grooved floor system

Den Boer Beton and Brouwers Equipment have, in co-operation with
IMAG-DLO, developed a low-emission floor manure scraper system.
With this grooved floor system, emission reductions of up to 50% can be
achieved. The grooved floor system consists of a closed, flat floor provi-
ded with grooves and an adapted manure scraper. The newly developed
floor elements are provided with grooves running parallel with the feed
alley. The liquid manure is removed to the underlying slurry pit via the
grooves and the discharge holes. The solid manure is carried off to the
ends of the passages by means of a manure scraper. The scraper blade
of the manure scraper is adapted to clean the grooves. Because the slurry
pit is closed and the liquid manure is being quickly removed, the emission
of ammonia reduces substantially. Detailled information on application.
Chain manure removal system

Day after day, the circular chain manure removal systems prove their
reliability, not only in cow houses but also in pig farming, slaughterhouses,
the horse breeding industry etc. Prices and technical specifications on
application.
Advantages
• Advice and guidance, templates, drawings etc.
• Parts subject to wear are replaceable.
• Low-maintenance.
• Long life.
• Reliable.
• User-friendly.
36 Tel. 0031-58-2911129
01-05-2010
Manure removal systems
Components drive system Model
Drive group on vertical frame, to be supported to wall, motor
reductor 0,55 kW, 3 x 400 V, 50 Hz, incl. pocketed sheave, frame
hot-dip galvanised, with two guide wheels, of which one turned
90º including tensioner
Suppl. for steel guide wheels with slide bearings and shafts
Drive group with three-phased motor 0,55 kW, 220/380 V, 50
Hz, reduction gearbox, pocketed sheave, on hot-dip galvanised
frame, with guide wheels and foundation plate for fitting to floor 5505-5489-038
Switch box, to be connected to 3 x 400 V, 50 Hz, Automatic start
by means of a built-in timer, built-in working hours counter, to be
shut off by a special current measuring relay 5560-5513-004
Manually operated control box 3 x 400 V, 50 Hz, automatic swit-
chin over/off by means of current measuring relay 5560-5494-000
Timer for folding scraper system 5560-5493-000
Heavy-duty corner wheel in frame, on foundation plate with
anchor bolts, including hot-dip galvanised guard
with spring housing, left 5560-5480-018
without spring housing, left 5560-5482-004
with spring housing, right 5560-5481-005
without spring housing, right 5560-5482-006
Suppl. for steel guide wheel with slide bearing and shaft
Meter of highly wear-resistant 10 mm chain, specially hardened
for this application 5505-0310-000
Junction link with bush bolt 5560-5497-001
Guide profile iron 50 x 50 x 3, with welded-on concrete anchors
and coupling pieces, to be cast-in in passages, serving as chain
guide, in lengths of 6 metres 5560-5478-008
Tensioning equipment, for tensioning chain 5560-5492-000
Meter of covering strip, hot-dip galvanised steel, for chain guide
profile 5560-5478-006
Folding scrapers
Sheet steel folding scraper with PVC guide wheels, pulling block
including chain tensioner for U-section
manure passage width 200 to 218 cm 5560-5495-036
Additional charge for rubber cleaning strip, incl. clamping plate,
for existing scrapers, with mounting plate
manure passage width 200 to 262 cm
Additional charge for rubber cleaning strip, incl. clamping plate,
for new scrapers
Combi scrapers
Combi scraper with self-adjusting blades, side flaps proveded
with rubber cleaning strips, scraper hot-dip galvanised, including
pulling block for U-section
manure passage width 200 cm 5560-5496-058
Additional charge pulling block with anti-swing profile
Spare parts
Dive (pocketed) sheave 10 mm. In case 30 links have a length of
less than 92 cm you use a standard sheave. With a length of 92
to 97 cm you use an oversized sheave
standard 5505-5489-001
oversized 5505-0118-000
Guide wheel including bearings
for corner wheel, with 90 mm bolt 5560-5487-005
for drive, with 160 mm bolt 5560-5487-006
Steel guide wheel including slide bearing, shaft and bearing discs 5560-5487-009
Rubber flooring for walking alleys 01-05-201008
Research shows that claw and leg injuries are very common with milking
cows. From the economical point of view, concrete is an attractive flooring
material. However, it does not seem to offer a cow much in the sense of
well-being. It appears that cows prefer a floor which gives them grip if the
claws can impress the material.
Het loopgangrubber is opgebouwd rondom een ingevulkaniseerd weef-

sel. The rubber flooring has a built-in texture. Together with the specially
formed burls underneath, the total thickness of the flooring is 18 mm. Be-
cause of those burls, the mat can be well impressed by the cow’s claws.
The weight is 14 kilo per square metre. The used rubber is 90% rubber,
only up to 10% is regenerate. This guarantees the mechanical strength
and conservation of the flexibility.
The rubber flooring is available in widths from 1 m up to 3 m increasing by

10 cm.
A large advantage of the mat is that it can be supplied on rolls up to a

width of 3 metres and a total length per roll of approx. 50 metres. This
makes it easy to keep the mat in place and it prevents the scraper from
getting stuck. In practice it is very easy to fasten. The surface ot the mat
Rubber flooring for walking alleys Model
has a profile that has been developed in practice. Its purpose is to let the
Meter of burled rubber for walking alleys, supplied on rolls,
grid scraper installation and the rubber flooring work together optimally.
thickness 18 mm (13 mm of mat with built-in texture and 5 mm
of burls), with hammer-blow surface
width 100 cm 5520-3509-009 Soft rubber
width 200 cm 5520-3509-027 Experiences, especially in the United States and Canada, are very po-
Fastening materials sitive about soft walking rubber. Rubber mats that are too hard seem to
Stainless steel hammer screw with plug 8 mm, length 80 mm 5520-0503-005 have even an inverted effect. The possibility to impress the mat demands
stainless steel washer 8,4 x 25 5500-8000-154 special features as to the construction and materials. The desired softness
may not lead to a decrease in durability. A way to lower the price level is
Stainless steel fastening strip, width 45 mm, length 3 m 5520-3524-000
the use of recycled rubber, by wich there often have to be made conces-
Fastening strip complete with plug/screw 5520-3524-007
sions concerning the mechanical strength.
Fastening
Fastening in length direction, only at the side where the two mats are
coming to lay against each other. Always keep 1 cm of dilatation space
on the sides with regard to the concrete. Middle fastenings every 1 metre
centre to centre by means of a hammer screw and washer. Keep the
screws at least 15 cm from the edge. At the ends of the walking rubber the
burls have to be grinded off over a width of 6 mm. Then fasten the rubber
with a stainless steel strip, in such a way that scrapers can run freely,
without stucking at the edges.
Eisele auger mixers

In view of its many advantages, the auger principle has been consciously
opted for. The auger rotates in a tunnel through the casing, thus producing
even more thrust. Unlike a screw mixer, the auger mixer can never get
blocked by forage residues. The mixer operates on the priming principle,
pullinig itself fast in the opening of the retaining wall. The mixer can be
adjusted for operation in two directions of rotation by means of an easy to
fit gearbox. This may be the right solution in difficult situations.
Mixer provided standard with auger positioning system
Double acting gearbox model 5802.D
38 Tel. 0031-58-2911129
01-05-2010
Eisele auger mixers
Advantages Eisele auger mixers
• Larger pumping action.
• Higher output.
• Cannot get blocked.
• Requires less power.
• Provided with ball bearings.
• Drive shaft runs in oil bath.
• Wear-resistant oil bath sliding ring sealing.
• Hot-dip galvanised mixer frame and auger tunnel.
• Tiltable in adjustable three-point linkage.
• May run dry.
Tiltable in three-point linkage

Owing to the tiltable suspension in the three-point linkage the mixer can
be easily slid into the mixer frame. When the mixer is hung over the guide
rails, the locking device can be easily released, allowing the mixer to tilt
into the guide rails. The tractor can then slide the mixer into the frame wit-
hout any further operation being required. The stock farmer even doesn’t
have to leave the tractor. Removing the mixer from the pit can be done
equally easy.
Slalom system
The huge pumping acting of our auger mixer makes it pre-eminently suited
to be used in a slalom system. However, as certain drawbacks attach to
the application of these systems, we would like to advise you per indivi-
Mixer for pits without channels, model 5800.60R
dual case.
PTO-driven auger mixers Model

Auger mixer 450 cm, 45 kW (60 hp)
standard 5560-5800-018
double-acting 5560-5800-026
without mixer tunnel, with thrust auger 5560-5800-029
without lifting frame 5560-5800-030
Auger mixer 500 cm, 45 kW (60 hp)
standard 5560-5800-019
without lifting frame 5560-5800-021
Electrically-driven auger mixers
Auger mixer with 15 kW (20 hp) electric motor, including V-belt
transmission and guard, excluding support
length mixer tube 500 cm 5560-5800-002
length mixer tube 550 cm 5560-5800-004
Star-delta switch 20 hp, hand-operated, excluding connectinig
cable 5560-5803-044
Automatic switch box with timer, excluding connecting cable 5560-5803-046
Fitting for auger mixers
Steel frame, dimensions 70 x 70 cm
Electrically-drive thrust mixer for setting in brick retaining wall 5560-5801-000
for casting in between formwork 20 cm 5560-5801-010
Set of guide rails
for pits up to 200 cm, length 340 cm 5560-5801-018
for pits deeper than 200 cm, length 450 cm 5560-5801-011
Mounting bracket for guide rails
for pits up to 200 cm 5560-5801-003
for pits deeper than 200 cm 5560-5801-004
Support permanently placed mixer 5560-5802-000
Double-acting gearbox, for pulling and pushing 5560-5802-001
Mechanical seal Couple shaft on one side adjustable at wide angle 5560-5851-000
Eisele electric submersible agitators 01-05-2010
The submersible agitators have been designed for mixing any kind of
manure, of cattle, pigs as well as poultry, in manure pits, channels and
silos and deal with straw and feed residues without problems. It derives
its impressive mixing power from the specially constructed propeller. The
propeller has been designed so that at a relatively low speed it keeps
Agitator 4 kW the manure moving. Priming, pressing and agitating all at the same time,
the submersible agitator turns the manure into a swirling mass. In a short
time, an enormous amount of manure can be agitated and mixed.
Advantages of silo agitators

• Fast and easy mixing.
• No need for using tractor or pump.
• Suitable for all types of manure (also poultry manure).
• Adjustable agitating direction (horizontal and vertical).
Agitator 5,5 - 7,5 kW • No structural measures required.
• Can be built-in in silos that already contain manure.
Thermal protection
The 3-phase motors are protected thermally against overloads by means
of “klixon” switches. Therefore, overloading for a short time does not
present any problems. The agitator can be restarted when it has cooled
down, when the cause of the overload has been traced.
Electric submersible agitators in roofed silos

When using submersible agitators in roofed silos, it is advisable to keep
Agitator 11 - 15 kW
the opening in the roof sufficiently large. The recommended dimensions of
the opening have been specified below:
• 2,2 up to 4,0 kW, width 140 cm, length from edge of silo 90 cm.
Mobile submersible agitators

The mobile submersible agitators have a compact frame and only need a
minimal pit opening. The models 5800.V03 and 5800.V55 are particularly
suitable to mix pig manure in hard to reach pits. Model 5800.V55 can also
be used for cattle manure.
• Submersible agitator 2,2 kW, minimal pit opening 50 x 30 cm, pit depth
up to approx. 1,1 metres, extendable up to max. 2,2 metres.
• Submersible agitator 4,0 kW, minimal pit opening 50 x 50 cm, pit depth
up to approx. 2,6 metres, extendable up to max. 4,8 metres.
Channel systems
Submersible agitators can be compactly built-in in channel systems,
without needing mixing pits. Mixing on a regular basis is prerequisite in
these systems.
Hydraulic agitators
On application we can also supply agitators for building on a hydraulic
cranes. The hydraulic agitators have a specially designed blade ensuring
a large driving power.
Agitator for vertical building-in
Technical specifications electric submersible agitators

Model Capacity Blade speed Propeller Thrust Nominal Weight Fuse Oil check
diameter current cartridges probe
5560-5800-062 4,0 kW 600 rpm 370 mm ap. 700 N 7,8 A ap. 85 kg 16 A +
5560-5800-070 5,5 kW 470 rpm 460 mm ap. 1.100 N 10,9 A ap. 160 kg 25 A +
The data are based on measurements in water. Standard connected to the electric system by means of a five-core cable. Four-
core cable on application. Direct switching up to 4 kW.
40 Tel. 0031-58-2911129
01-05-2010
Eisele electric submersible agitators
Submersible agitators without accessories Model
Electric submersible agitator with 8 metres of cable, switch box
incl. CEE socket and safety
4,0 kW 5560-5800-062
5,5 kW 5560-5800-070
7,5 kW 5560-5800-035
11,0 kW 5560-5800-053
15,0 kW 5560-5800-057
Heavy-duty electric submersible agitator, 7,5 kW, with special
seal, oil checking device, two-component coating and 8 metres
of cable, exclusive of switch box, with stainless steel anti winding
blade 5560-5800-041
Agitator on guide rails
Switch box with star-delta switch, motor protection relay, mini-
mum voltage protection, oil level indicator lamp, CEE socket, 32
Amp. (five-pole) 5560-5803-041
Submersible agitators for building in silos
Electric submersible agitator on carrier, complete for building in
in a silo 500 cm high, including bottom bearing, vertical guide, at-
tachment with lock, lifting mechanism with self-locking winch and
stainless steel cable, 8 metres of cable, switch box and guard
5,5 kW 5560-5800-106
7,5 kW 5560-5800-107
11,0 kW 5560-5800-108
15,0 kW 5560-5800-109
Additional or discount charge per 50 cm for higher or lower silos

for D55, D75 and D10
for D15 and D20
Agitators with stainless steel components
Electric submersible agitator for a silo of 500 cm, with stainless
steel guide and carrier
Mobile submersible agitators
Mobile submersible agitator
pit depth up to 1,1 metres, 2,2 kW 5560-5800-085
pit depth up to 2,6 metres, 4,0 kW 5560-5800-086
Extension piece, length 1,1 metres
for agitator 2,2 kW (max. 1 piece ) 5560-5803-073
for agitator 4,0 kW (max. 2 pieces) 5560-5803-074
Submersible agitators for channel systems
Agitator for building-in on guide rails, on drum carriage, for frame
70 x 70 cm, including lock, 8 metres of cable and manually opera-
ted switch box, without frame, guiding rails and mounting bracket 5560-5800-000 Mobile agitator 7,5 kW
Agitator for vertical building-in, on drum carriage, max. pit depth

250 cm, incl. vertical guide frame, 8 m of cable and manually
operated switch box
7,5 kW, for mixer opening 70 x 70 cm 5560-5800-088
15,0 kW, for mixer opening 90 x 90 cm 5560-5800-092
Seperate manually operated switch box 5560-5803-041
Switch box with seal controller, timer and automatic star-delta
switch (manually operated box lapses) 5560-5803-060
Steel frame, dimensions 70 x 70 cm
for setting in brick retaining wall 5560-5801-000
for casting in between formwork 20 cm 5560-5801-010
Set of guide rails
for pits op to 200 cm, length 340 cm 5560-5801-018
Mounting bracket for guide rails
for pits up to 200 cm 5560-5801-003
for pits deeper than 200 cm 5560-5801-004
Mobile agitator 2,2 kW
Eisele vertical slurry pumps 01-05-2010
Complete vertical slurry pumps Model

Vertical slurry pump, without coupling shaft, for pit depths from
150 to 200 cm
PTO driven, 33 kW (45 hp), capacity 4.500 l/min
PTO driven, 52 kW (70 hp), capacity 8.000 l/min 5560-5815-010
electric motor, 11 kW (15 hp), capacity 2.700 l/min 5560-5810-007
electric motor, 15 kW (20 hp), capacity 3.300 l/min 5560-5810-009
Additional charge per 50 cm pit depth
Separate vertical slurry pump
Vertical slurry pump, without gear box and accessories, for pit
depths from 150 to 200 cm
55 kW (75 hp), capacity 8.000 l/min 5560-5817-001
Drive units
Gear box, 540 rpm 5560-5813-000
Accessories
Movable underframe, suitable for all pumps mentioned, with
hand-operated winch and take-off frame, suitable for the three-
point hitch of the tractor 5560-5850-000
Pump mounting bracket on pit cover 5560-5856-001
Coupling shaft with break pin protection 5560-5851-003
Three-way cock
The ideal pump for total slurry handling. Designed for the toughest and
most difficult conditions. This pump mixes, chops and pumps the thickest
slurry containing straw and forage residues. Ideally suited for large-scale
slurry handling in cubicle houses and in facilities where thick manure is
produced, for example in the bulle fattening industry and in accommoda-
tions for young stock. Whthout circulation pipes, if desired mounted on a
movable frame, also widely applied in large open or closed slurry pits and
pits for storing poultry manure, of laying hens as well as table poultry with
heavy feathering. Pump house with chopping mechanism
Advantages Eisele vertical slurry pumps

• May run dry.
• Can cope with stones, pieces of iron, etc.
• Provided with a reliable chopping mechanism.
• Supplying high pressure, up to 4,5 bar.
• Impeller infeed from the top.
• Large capacity and exceptionally long service life.
• Suitable for pit depths up to 500 cm.
• Rise tube and operator in stainless steel.
Spray-agitating system
An essential element of the pump is the attached spray-agitating system.
This makes it possible to homogenise the slurry up to a distance of ap-
prox. 15 metres from the pump, ensuring that all slurry can drift to the
pump. The cast-iron three-way cock is easy to operate, enabling you to
switch from agitating to pumping rapidly.
Auger
The heart of the pump is the cast-iron heavy-duty impeller, which is inte-
60 60
graged into the auger. The auger is equipped with a welded-on Widia-staal
cutting blade. Between the auger and the extra high cast-iron counter ring,
all straw and forage residues are chopped. When the pump is running,
the cutting blade passes the counter ring one hundred times per second. 80
This makes the slurry injection process a great deal easier, faster and, 80
consequently, cheaper!
42 Tel. 0031-58-2911129
01-05-2010
Eisele lobe rotor pumps
Solidly constructed and easily detachable, the Brouwers-Eisele lobe rotor
pump can be used for a wide range of applications. It can be used in vari-
ous locations. Special access pits are not required. It is perfectly suited for
pumping over large distances and also for raining manure. Incorporating
many advanced technical features, this pump is built to run for hours on
end.
Advantages Eisele lobe rotor pumps

• Quiet, vibration-free, stable operation, owing to the application of three-
lobe rotors.
• Constant output, also when handling thick manure.
• Rotors provided with highly flexible coat. The toughness and film thick-
ness of this coat reduce damage to a minimum.
• Large ball passage and this minimising blocking risk.
• Quickly detachable pump house. Low-maintenance and user-friendly.
• The pump house and the front cover are provided standard with re-
placeable wearing plates.
• Quickly removable rotors; bearings and seals are kept in place.
• Owing to the heavy-duty one-sided bearing system only two instead of
four seals are required.
• Shaft sealing by means of labyrinth rings, with oil-lubricated hard metal
sliding ring seals. This construction makes for a long service life.
Slurry raining
Especially the lobe rotor pump model 5855.DK12 is very suitable for
raining slurry. Pumping slurry under high pressure over large distances is
precisely the area of application this model caters for. At very high pressu-
res, the three-lobe rotors provide less pulsation and ensure a quiet pump
operation, which are the determining factors for the service life of seals,
couplings, pipes and the raining system.
Lobe rotor pump for slurry tankers
Lobe rotor pumps Model

PTO-drive lobe rotor pump, complete with hot-dip galvanised
lifting frame, replaceable wearing plates, coupling shaft (Walter- 3
scheid) with break pin protection, suction and delivery bend with 2
M-parts or F-parts, inspection glass and membrane diaphragm Cross-section lobe rotor pump
manometer 1 1 = draw/press side
1 2 = rotors with a thick flexible coat
48 kW, max. capacity 240 m³/h
3 = pump house
33 kW, max. capacity 150 m³/h 5560-5855-014
PTO-driven lobe rotor pump, without under-frame and acces-
sories, for slurry tankers 2
Electrically driven lobe rotor pump on foundation frame, with
coupling, guard, suction and delivery bends, inspection glass,
manometer and motor reductor /660 Volt 50 Hz
7,5 kW, max. cap. 36,0 m³/h at max. 4 bar pressure
11,0 kW, max. cap. 38,5 m³/h at max. 8 bar pessure
Lobe rotor pump 48 kW
Eisele electric pumps 01-05-2010
Eisele electric immersion pumps

Besides pumping all kinds of manure, this kind of pump is suitable for various industrial applications. The pumps
with chopping mechanism prevent blockages. The pumps are sturdy and amply dimensioned, thanks to the own
fabrication of the built-in electrical motors. Thermally protected by means of built-in micro switches. This is the
best protection, allowing the pump to be maximally overloaded. Motors 380/660 Volt, 50 hz, IP68, 1.450 tpm.
Eisele elctric immersion pumps Model

Immersion pump with electric motor, with 8 metres of acid-
resistant cable, without accessoires
3,0 kW
4,0 kW 5560-5880-012
5,5 kW 5560-5880-013
7,5 kW
with chopping mechanism, 5,5 kW 5560-5880-006
with chopping mechanism, 7,5 kW 5560-5880-000
Pump base 5560-5880-007
Switch box for direct switching-on, with motor safety relay, low
voltage protection, oil level indicator lamp and CEE socket (five
pole), for 3 and 4 kW pumps 5560-5803-043
E-pump
E-pump
An immersion pump for the removal of rinse water from milking parlours.
Pump and impeller made from stainless steel. Large ball drain (35 mm).
Shaft sealing by means of a double mechanical seal. Motor with built-in
overload protection. A pump hole of 60 x 60 cm with a depth of 48 cm is
optimal.
E-pump Model
Water-jet pump with electric motor 230 Volt, capacity 240 l/min,
complete with float valve, 5 metres of cable incl. plug, knee with
worm pipe and hose clip 5560-5885-002
Accessories for slurry pump

Hoses Model
Flat rollable hos, per metre
rubber delivery hose, 125 mm 5560-5862-001
synthetic transport hose, 125 mm 5560-5862-002
rubber delivery hose, 153 mm 5560-5862-006
Suction hose
length 300 cm, 125 mm 5560-5862-003
length 400 cm, 125 mm 5560-5862-004 F-part Sliding cut-off valve End-dose cut-off valve Brass sliding cut-off valve
length 400 cm, 152 mm 5560-5862-007
Connection piece for suction pipe 125 mm 5560-5867-000
Hose clips
Heavy-duty hose clip
131-140, for delivery hose 125 mm 5560-5863-002
134-148, for suction hose 125 mm 5560-5863-004
148-162, for delivery hose 152 mm 5560-5863-006 F-parts Model
162-176, for suction hose 152 mm 5560-5863-007 Straight F-part
threaded ring 125, 333 5560-5870-000
PVC-connection 160, 159 5560-5871-000
PVC-connection 160, 133 5560-5872-001
Cut-off valves
Sliding cut-off valve
with spindle and hand-wheel 5560-5888-009
with lever 5560-5888-010
Extension piece for spindle
100 cm 5560-5889-001
150 cm 5560-5889-002
200 cm
End-dose cut-off valve, diameter 315 mm 5560-5890-001
Operating bars for end-dose cut-off valve, 150 cm 5560-5892-000
Brass sliding cut-off valve 6” incl. flanges, PVC brushes and
sealing rings 5560-5893-002
Pull bar for sliding cut-off valve 5560-5893-006
Handle for sliding cut-off valve 5560-5893-004
44 Tel. 0031-58-2911129
01-05-2010
Biogas installations
Together with sister organisation Brouwers Equipment, Brouwers

Eisele self-drawing pumps BioEnergy is a part of the Wilaard group. Brouwers BioEnergy BV has
been active as a “turn-key” builder of biogas installations for a couple of
years now. This has resulted in a number of innovative biogas installations
in the Netherlands and Belgium, with capacities varying between 340 and
1450 kWel.
Brouwers BioEnergy BV realises those installation in co-operation with

a number of partners, each of them specialist with a large amount of
experience in their own field. Brouwers BioEnergy BV combines its own
knowledge an experience in the agricultural field with this specific techni-
cal knowledge of its partners. Some of them already built complete biogas
installations in for instance Germany for a large number of years.
If you consider to invest in a biogas installation, Brouwers BioEnergy

would like to put this knowledge and experience to your disposal, in
order to make a well balanced judgement if and in what way this will be
a suitable and profitable solution in your specific situation. Even after
delivery Brouwers BioEnergy stays concerned, in order to ensure an
optimal result of your installation. Our process technologist will be happy
to contribute.
Should you be interested to evaluate the possibilities for your farm,

together with our specialist, please contact us.
Eisele self-drawing pumps
Self-drawing pump without chopping mechanism, particularly suitable for
thin pig manure, liquid manure or dirty water. Double ceramic seals in oil
bath, may run dry. Clog-free open impeller. Built-on manually operated
one-way valve, including built-on motor switch.
Eisele self-drawing pumps model

Self-drawing pump incl. star-delta switch (5,5 and 11,0 kW), CEE
connector, plug and 3 metres of suction pipe
4” F-part, 2.100 l/min, 5,5 kW
4” F-part, 2.660 l/min, 11,0 kW 5560-5840-000
Fastening items 01-05-2010
Mounting clamps Model

Mounting clamp
¾” 5530-9630-000
1” 5530-9630-001
1¼” 5530-9630-011
1½” 5530-9630-002
2” 5530-9630-003
2½” 5530-9630-004
3” 5530-9630-005
3½” 5530-9630-006
4” 5530-9630-007
Threaded straps
Threaded strap (A x B x C)
Hexagon bolt Coach screw Carriage bolt Wedge bolt
1” , 70 x 10 x 34 mm 5500-9660-013
1¼”, 80 x 10 x 42 mm 5500-9660-021
1½”, 71 x 10 x 48 mm 5500-9660-025
Bolts Model
2'’, 102 x 10 x 60 mm 5500-9660-038
Galvanised hexagon bolt with nut 2½”, 112 x 12 x 78 mm 5540-9660-007
ø 10 mm, L = 30 mm 5500-1210-042 3”, 125 x 12 x 98 mm 5500-9660-044
ø 10 mm, L = 40 mm 5500-1210-046 3½”, 135 x 12 x 101 mm 5500-9660-047
ø 10 mm, L = 50 mm 5500-1210-048
ø 10 mm, L = 60 mm 5500-1210-001
ø 12 mm. L = 35 mm 5500-1210-088
ø 12 mm, L = 40 mm 5500-1210-091
ø 12 mm, L = 50 mm 5500-1210-093 9660 9660
ø 12 mm, L = 60 mm 5500-1210-095
A A
ø 12 mm, L = 70 mm 5500-1210-097 C C
ø 12 mm, L = 80 mm 5500-1210-100
ø 12 mm, L = 90 mm 5500-1210-104
ø 12 mm, L = 100 mm 5500-1210-108
ø 12 mm, L = 120 mm 5500-1210-110
ø 12 mm, L = 140 mm 5500-1210-115 9630 B B
ø 12 mm, L = 160 mm 5500-1210-119
ø 16 mm, L = 90 mm 5500-1210-135 Concrete anchors
Hot-dip galvanised coach screw The grade of concrete determines the type and size of anchors to be
ø 8 mm, L = 50 mm 5500-8000-126 used. If the concrete grade cannot be established and/or at a limited edge
ø 8 mm, L = 60 mm 5500-1211-005 distance (15 cm) injection achoring is most reliable. When using a torque
ø 10 mm, L = 70 mm 5500-1211-009
spanner, you ensure that the maximum torque is not exceeded. Always
Galvanised carriage bolt with hexagon nut reed and follow the instructions on the packaging.
ø 6 mm, L = 50 mm 5500-1212-001
ø 6 mm, L = 70 mm 5500-1212-003
ø 8 mm, L = 30 mm 5500-1212-009
ø 8 mm, L = 50 mm 5500-1212-014
ø 10 mm, L = 35 mm 5500-1212-026
ø 10 mm, L = 50 mm 5500-1212-030
ø 10 mm, L = 70 mm 5500-1212-034 Concrete anchor bolt Applicator
Wedge bolt
dim. 10 x 80 x 50 mm 5500-1214-000
dim. 12 x 120 x 80 mm 5500-1214-001
Washers Wedge anchor bolt
Large hot-dip galvanised washer

13 x 50 mm ø 5500-1217-001
19 x 56 mm ø 5500-1217-000
Nylon plug Trough-feed anchor Threaded rod
Nylon plug
8 mm 5500-1218-001
10 mm 5500-1000-206
Concrete anchors Model
12 mm 5500-1218-003
Galvanised concrete anchor bolt with nut
Studs
dim. M10 x 90 mm 5580-1219-000
Stainless steel stud dim. M12 x 78 mm 5580-1219-002
10 mm 5500-1208-005 dim. M12 X 111 mm 5580-1219-009
12 mm 5500-1208-006
Galvanised wedge anchor bolt with nut
Stainless steel hexagon nut dim. M10 x 109 mm 5580-1219-001
10 mm 5500-1000-129 dim. M12 x 120 mm 5580-1219-011
12 mm 5500-1200-076
Corrosion-resistant through-feed anchor
hole 12 mm, L = 115 mm 5580-1219-018
hole 16 mm, L = 110 mm 5580-1219-019
hole 18 mm, L = 120 mm
Injection anchoring
Tube two-component synthetic resin mortar, contents 345 ml, incl.
2 mixing sprouts with adapter 5580-1219-022
Heavy-duty applicator for mortar cartridges, also suitable foruse
of standard cartridges (single) 5580-1219-020
Mixing sprout with adapter 5580-1219-021
Bellows for making holes dust-free 5580-1219-017
Threaded rod with washer and nut, zincrolyte
M12 x 160 5580-4502-002
M16 x 190 5580-1219-014
46 Tel. 0031-58-2911129
01-05-2010
E-brush®
The E-brush® makes it easy for cows to clean themselves and release
them from dirt and parasites. It will make cows feel good. As their well-
being improves, they are less susceptible to stress and are more resistant
to infections and thus are healthier. And, after all, a healthy cow is a pro-
fitable cow. By using the E-brush® the blood circulation will improve and
give cows a healthier skin. The E-brush® is ideal for hard to reach places,
such as head, back and tail implant.
New
The familiar Brouwers Equipment E-brush® has ben adjusted at several
points. The most radical change concerns the adjustment of the drive.
Where the old brush was driven by a chain transmission, we chose a
direct drive of the brush in the new construction. The brush is now directly
fixed to the shaft of the drive. However this is done in such a way that only
the drive forces find their way to the brush-shaft fastening. The oblique
forces the cows exercise to the brush normally don’t reach the fastening.
In the new construction the brush can be tilted upward. The basic position
has also been kept horizontal, with reason, to be able to efficiently clean
the back of the cows. The brush has a new starting mechanism that con-
stantly changes the sense of rotation. Because the brush hairs are now
being charged evenly on both sides, the brushes will last much longer as
the hairs stay upright.
The drive part now leaves the factory completely mounted. When placing
the E-brush® in the barn you only have to slide the brushes onto the shaft
and secure them. The brush set is delivered in two boxes. One box with
the complete drive part and the brushes plus manual in the second box.
During mounting in the factory each brush drive gets a trial run and also
the rotation mechanism is being tested.
The drive motor is only 120 W, which makes it quite simply securable
against overloads. Connection tenstion European 1 x 230 V, 50 hz. Other
tensions on demand. The motor is supplied with a temperature protection.
Switching on is completely electronic without mechanical contacts. The
brush will start when it is being touched by the cows and will switch off
automatically when it is not being movoed for a certain period of time.
Part of the standard delivery are two cross profiles that can be fixed on the
upper and lower side of the back frame for additional stability. The back
plate has a broad hole pattern, which makes it possible to fix the brush to
vertical tubes of different measurements (2”, 2½”, 3”, 3½” en 4”) by using E-brush® Model €
threaded straps (not included). E-brush® complete, for wall fixing, 230 V / 50 Hz 5580-2201-002 1.380,00
Cattle crush
Next to claw care, the cattle crush can be used for the other recurring
treatments. With the cattle crush you can treat a larger amount of animals
quickly and effectively or efficiently and safely treat individual animals.
The cattle crush is standard equipped with:
• Slowing winding tool for the hind legs as well as the belt, secured
against moving back.
• Roller running in bearings for the rope around the hind legs.
• Chain to lock the cow in from behind.
• Nylon heel strap to wind up the hind leg.
• Wooden floor.
• Frame hot-dip galvanised.
Cattle crush Model

Cattle crush, without front leg supports
standard model 5580-6480-002
walk-through model 5580-6480-004
Set of two front leg supports
standard set 5580-8695-011
luxury set with winch 5580-6482-001
Set of rubber wheels for internal transport 5580-6481-003
Front leg support 8695.BR06 Standard front leg support Auxiliary axle with large wheels (incl. fastening items) 5580-8695-007
Livestock care 01-05-2010
Allflex ear tags Model

Unnumbered ear tag (white, yellow, organe, blue or green), in maxi
series of 20 pairs, price per pari
small-small 2611
(not in white) sheep-sheep 2621 Applicator Total Tagger
small-junior 2643 senior
junior-junior 2641
small-senior 2663
senior-senior 2661 junior
(only in yellow) small-maxi 2673
Numbered eart tag (yellow with black figures), in series of 20
sheep
paris, price per pair (junior till no. 1.000 on stock, the others on
demand)
small-junior 2642
Automatic applicator
junior-junior 2640
small-senior 2662 small
senior-senior 2660
small-maxi 2672
Applicator total tagger, for all ear tag sizes, with additional
perforating pin 5580-2695-000
Automatic applicator, for all ear tag sizes 5580-2694-000
Separate perforating pin
for total-tagger 5580-2697-000
for automatic applicator 5580-2697-001
Black marker for Allflex ear tags
with broad tip 5580-2696-000
with fine tip 5580-2696-001
Floor scrapers
Bowed floor scraper, width 66 cm, with supple, wear-resistant
and two-sided useable rubber strip, galvanised finish, with clam-
Nylon ribbons Cow chains Sow girth tether
ping bush to attach to a handle (not included) 5580-2396-000
Single rubber strip with holes, width 66 cm, for bowed floor
scraper 5580-2394-004
Straight floor scraper, with supple, wear-resistant and exchange-
able rubber strip, hot-dip galvanised, without handle
width 40 cm 5580-2389-000
width 54 cm 5580-2390-000 Bowed floor scraper Straight floor scraper
Single rubber strip, with holes, for straight floor scraper
width 40 cm 5580-2391-000
width 54 cm 5580-2391-001
Nylon ribbons and cow chains
Heavy duty nylon ribbon with hot-dip galvanised link buckle
length 110 cm 5510-2015-000
length 135 cm 5510-2015-001
Heavy duty nylon ribbon with sewed-on grey leather and hot-dip
galvanised round pin buckle
length 110 cm 5510-6620-000
length 135 cm 5510-2017-002 Feeder
length 165 cm 5510-2017-003
Hot-dip galvanised double cow chain, with 3 swivels
length 86 cm 5580-2020-001
length 40 cm 5580-2025-000
Hot-dip galvanised single cow chain, with swivel, length 70 cm
5580-2030-000
Fitting for use of nylon ribbons on sows
Hot-dip galvanised chain, length 40 cm, thick 7 mm, with trian-
gular swivel 5500-2040-000
Stainless steel safety link for fixing chain to tether 5580-2046-000
Bow shackle 10 mm, hot-dip galvanised 5580-4110-004
Single floor anchor, wear-resistant cast iron, hot-dip galvanised
5580-4153-000
Link buckle, hot-dip galvanised 5580-2045-000
Feeders
Hot-dip galvanised feeding trough, internal width 27 cm, height
10 cm
length 50 cm 5580-2930-000
length 100 cm 5580-2930-001
length 150 cm 5580-2930-002
length 200 cm 5580-2930-003
length 250 cm 5580-2930-004
length 300 cm 5580-2930-005
48 Tel. 0031-58-2911129
01-05-2010
Livestock care
Fastening items Model
Hot-dip galvanised pigsty bolt 5580-3104-000
Eyebolt with swivel
for half-brick wall 5580-1215-001 3104 1215
for nine-inch wall 5580-1215-002
Galvanised emergency lock, length 100 mm 5580-2126-000
Hot-dip galvanised link buckle 5580-2045-000 2230

Hot-dip galvanised steel C-hook 5510-9141-000 2126
Bow shackle
stainless steel, 5 mm 5580-4110-001
stainless steel, 6 mm 5580-4110-002
hot-dip galvanised, 8 mm 5580-4110-003
2045 9141 4110
Ring with swivel, 100 mm on the inside 5580-2140-000
Hot-dip galvanised swivel
7 mm 5580-9225-000
10 mm 5580-9225-001
Hot-dip galvanised triangular swivel 5580-9226-000
disinfecting foot-bath
Disinfecting foot-bath in polyethylene, with rounded corners, 2140 9225 9226
easy to empty, stackable, width 85 cm, length 210 cm, height 17
2235
cm, weight 20 kg, maximum contents 200 litres, with graduation 5580-3000-000
Brush sets
Hinged holder with two brushes
fixing to wall 5580-2230-000
fixing to feed barrier 7800 series 5580-2230-001
Springy holder with two brushes

fixing to wall 5580-2235-000
fixing to cubicle partition 5580-2235-004
fixing to feed barrier 7800 series 5580-2235-006
Single brush 5580-2232-000 2199
Salt lick holder
Salt lick holder, hot-dip galvanised (we advise to paint all iron in
the direct surroundings with a good adhesive paint) 5426
for fixing to wall 5580-4320-000
for fixing to 1½” tube 5580-2199-001
for fixing to 2” tube 5580-2199-002
for fixing to 2½” tube 5580-2199-003
Cow immobilizers
Cow immobilizer, solid construction 5580-5426-000
Separate cap for cow immobilizer 5580-2073-000
Separate spring for cow immobilizer 5580-2073-001 2072
Aluminium cow immobilizer, freely adjustable 5580-2072-001

3000
E-fan 01-05-2010
Ventilators without accessories Model
Circulation ventilator, 3 x 400 V, 50 Hz, motor 1,10 kW, 3,2 A,

cap. 44.500 m³/h, weight 80 kg, dim. 140 x 140 cm 5570-2211-000


Accesssories for circulation ventilators
Motor safety switch in synthetic casing, to be placed close to the

ventilator, amperage adjustable from 2,5 - 4,0 A, for 1,10 kW, 3
x 400 V 5570-6995-002
Motor safety switch in synthetic casing, to be placed close to the

ventilator, amperage adjustable from 1,6 - 2,5 A, for 0,55 kW, 3
x 400 V 5570-6995-001
Suspension set, suitable for a height from truss to upper side of

ventilator of approx. 5 metres, consisting of: 2 pieces of chain
of 5,5 metres each, 2 triangular plates each with 3 pieces of M8
bolts incl. spring rings, 2 bow shackles and 2 pieces of M10 bolts
incl. security bolts and washers for fastening the chain to the
triangular plates
Because of the use of milking robots and the rising milk productions we for ventilator 107 x 107 cm 5570-6940-000
are seeing more and more farmers who keep their herd inside year-round. for ventilator 140 x 140 cm 5570-2212-008
In order to increase the well being of the cows and te keep up the food
consumption during the warmer days in summer, the use of large air- Separate galvanised eye bolt M8 5570-6994-003
circulation ventilators is very effective.
Metre of chain 42,5 x 15 x 7 mm, hot-dip galvanised 5510-9144-000
The E-fan circulation ventilators for use in cubicle stalls for milking cattle
are standard equipped with a V-belt transmission. This reduces the num- Bow shackle 8 mm, hot-dip galvanised 5580-4110-003
ber of revolutions of the blade, which makes the ventilators highly efficient
and it will also keep the noise production within limits. For model 2211 it Transformers for revolution control
only amounts up to 65 dBA at a distance of 7 metres and for the models
2208 and 2209 only 64 dBA at 7 metres distance. Manually operated 5 phased transformer, built in a spot-proff
steel casing (IP54), transformer winding provided with clixons
with disconnection relay in the casing, tension 3 x 400 V, 50 hZ
At the front and the back the ventilators are standard equipped with a grid. (neutral wire not necessary)
The casing is made of galvanised steel, the blades of stainless steel. The maximum current 7 ampere 5570-6920-007
used rotary motors are specially designed, in order to make them suitable maximum current 11 ampere 5570-6920-010
for revolution control by a transformer. maximum current 14 ampere 5570-6920-013
maximum current 17 ampere 5570-6920-014
Control thermostat in separate casing, 5 positions, mechanical,

to regulate the capacity automatically, to be connected to a
specially designed transformer, in which the manually operated
switch is replaced by an electronic switch relay 5570-6921-000
Automatic 5-phased transformer, as described above under

2212.05, however with electronic switch relay instead of manu-
ally operated. Provided with a rotary switch off-hand-automatic.
In the automatic position the ventilator basically rotates at the
lowest level as long as the measured temperature stays beneath
the set temperature. If the temperature rises 1,5ºC above the
set temperature, the automatic transformer switches to level 2.
At another temperature rise of 1,5ºC it switches to level 3 and so
on upward
For use in cubicle stalls, we recommend the largest model with the highest maximum current 14 ampere 5570-6920-002
capacity. An intermediate space of 15 up to 18 metres max. is usual for maximum current 17 ampere 5571-6920-003
this model. Room underneath the ventilators min. 250 cm. In order to keep maximum current 21 ampere 5570-6920-003
the cows active at the feed barrier for as long as possible, the best place
for the ventilator is above the walking alley, next to the feed barrier. The Automatic switching on/off ventilators
smaller models can be applied in lower stalls, hold areas or at milking
switchbox with 1 or 2 magnetic relays (second with delayed
installations.
switching), with swivels for 3 or 6 connections and switch hand-
off-automatic. Including separate thermostat box for 2-wired
To determine the size of the transformer you should reckon 3,5 amp. per connection with rotary switch for temperature adjustment. If the
ventilator for model 2211. For the models 2208 and 2209 2,2 amp. per set temperature is being reached in the automatic position, the
ventilator. connected ventilators will start and turn on full power. As soon as
the temperature falls under the set value the ventilators will stop.
For extra cooling or humididying the E-fan can be equipped with a water For ventilators of 1,1 kW, 400 V, 3,5 A each
for 1 up to 3 ventilators
atomiser with a capacity of 15 up to 30 l/h. The atomiser can be easily
for 4 op to 6 ventilators 5570-2212-009
installed and it operates without any nozzles, there are no risks of clogging for 7 up to 9 ventilators 5570-6930-001
with impurities or limestone.
50 Tel. 0031-58-2911129
01-05-2010
Ventilation
Brouwers Equipment BV can supply a wide ringe of ventilation systems.

Underneath you will find a small part of our products. Complete extensive
information and prices on application.
Ventilation ridge
The RFV-system ventilation ridge is specially developed for agriculatural
buildings. The system is based on natural ventilation according tot the
“Venturi” principle. This principle quickens the airflow over the roof by
means of narrowing, by which an absorbin action arises (the so-called
chimney effect). The RFV-system ventilation ridge is composed of high-
quality materials, very solidly constructed and tested on functionality and
quality in several agricultural buildings. The RFV-system ventilation ridge
is easily and quickly to assemble. Useable for new buildings as well as for
renovation of existing ridge systems. Unique are the optinal ridge pieces,
useable on different kinds of corrugated plates. The RFV-system venti-
lation ridge is available with non-transparent or crystal-clear corrugated
plates.
Cow house curtains

We supply a wide range of ventilation cloths, varying rom opaque cloth to
bird netting. The cloth can be fixed, if desired with a tightening device. It is
also possible to apply several sorts of cloth moveable. The systems can
be more or less automated.
• Single tube system: opens from the bottom upward. The cloth rolls
around a tube, which is lifted up by means of a winch.
• Double tube system: opens from the top downward. The curtain is kept
tight by means of a tube that is freely laid in the cloth.
Agridoors
The Agridoors are a flexible solution to close frequently used entrance
openings. Because of the horizontal strengthening profiles large free
spans (max. 6 metres) are possible. During assembly the door can easily
be shortened in width with help of the instructions. Underneath the cloth
has a grey sealing flap of 140 mm high. There are several kinds of cur-
tains available. It is also possible to use different kinds of curtain between
the profiles. The maximum height is 6,1 metres. The curtain runs up to
the sidelong guiding rails. This results in less draught and makes it closed
for birds. The winding tube is provided with a packet of springs in order to
make the operation easier. The lower tube and the winding tube are made
from alumiinium. The vertical rails are made from galvanised steel.
Variable Ventilation System

This roll-up sidewall ventilation system provides a minimum of draught, a
maximum of fresh air and protection against all weather conditions. The
standard version can be applied in large openings up to 3 metres high and
even 60 metres long. Different kinds of durtains can be integrated in this
system, if desired also in combination. An extra bird net can be fixed in
sections. The system can be operated manually or by means of electrical
motors. Climate controlled operation by means of sensors is also possible.
Your dealer:
Brouwers Equipment B.V.

Vestaweg 5
Postbus 203
8901 BA Leeuwarden
Holland
Tel. 0031 - 58 - 2911129
Fax 0031 - 58 - 2911100
www.brouwersequipment.com
[email protected]
built stronger to last longer
catalogue 2010

Catalogus 2010 ENGELS

Uploaded by

Copyright:

Available Formats

Catalogus 2010 ENGELS

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogus 2010 ENGELS

Uploaded by

Copyright:

Available Formats

built stronger to last longer

Brouwers is a leading Dutch designer and manufacturer of high-quality

Research and Development

Critical stock farmers

Growing share in the world market

Sales Department External Area Sales Managers Direct dial no.

In this respect it is very important

This is no different for livestock

That is why Brouwers Equipment

VAT nr. : NL810809400B01

Cantilever model-R cubicles ����������������5

Terms of delivery and payment

Requirements model-R cubicle partitons

Cubicle partitions Model

Space Tube Model

Cross clamp (double row) 2½” x 2” 5510-1231-002

Knee bars see page 11 220

By applying the brisket concrete elements a rounded cow-friendly thres-

B A The model-R cubicle partitions are

Measurements model-R cubicle partitions The cubicle partitions for large

Requirements model-R cubicle partitions

5510-8548 5510-8549 5510-8550

Shoulder bar and retaining bar Model

5550-1932-001 5550-1932-000 5510-9622-001

Synthetic partition wall Model

Rear tube Knee bar

Brouwers delivers a wide range of Tube diameters Description Dimensions Model

Tee-clamp cast iron 2” x 2” 5510-1250-000

1½” x 1¼” x 1½” 5510-1945-001

Three-way clamp 1½”x1¼”x1¼”x1¼ 5510-1232-000 1½” 5510-3455-000

1½” x 1½” 5510-9618-006

1½” x 1½” 5510-9626-005

1½” x 1½” 5510-9628-003

2½” x 1½” 5510-9629-005

Gummysoft Model A good floor covering helps you to

Set for connecting two top mats

Burled rubber Model

A 100% polyurethane foam, with a density geared for the properties of

Polysoft calve mattress

Polysoft calve mattress Model

Anti-gorge function M-locks® Model

Separating cows Operating lever 5530-7355-005

Classic Locks Model

Measurements feed barriers for young stock

Mounting brackets Model

At gates from 440 cm an additional 2½” support post has to be placed.

Measurements self-locking Swedish feed barriers (in cm)

length centre to centre

Self-locking Swedish feed barriers Model

Measurements diagonal bar feed barriers

Stock from 18 months Model

Self-locking feed barrier

Hinge Lock support post Lock wall

Double lock Hinge and lock Double hinge

Single lock Single hinge

Portable sliding grouping barrier

Double routing gate

Screw-on support post Routing gate element

Grouping area barriers

Grouping barriers 98 cm high Model Grouping barriers 79 cm high Model

Cantilever model-R cubicles ��5