Starex SD 0150

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Starex SD-0150

Acrylonitrile Butadiene Styrene www.ulprospector.com


LOTTE ADVANCED MATERIALS CO., LTD.
Technical Data
Product Description
Starex SD-0150 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America,
or North America. Typical application: Automotive. Primary characteristic: rohs compliant.
General
Material Status • Commercial: Active
• Processing (English)
Literature 1 • Technical Information - ASTM (English)
• Technical Information - ISO (English)
UL Yellow Card 2 • E115797-219558

Search for UL Yellow Card


• LOTTE ADVANCED MATERIALS CO., LTD.
• Starex
• Africa & Middle East • Europe
Availability • North America
• Asia Pacific • Latin America
RoHS Compliance • RoHS Compliant

Physical Nominal Value (English) Nominal Value (SI) Test Method


Density / Specific Gravity
Natural 1.04 1.04 g/cm³ ASTM D792
Natural 1.04 g/cm³ 1.04 g/cm³ ISO 1183
ASTM D1238
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) 2.0 g/10 min 2.0 g/10 min
ISO 1133
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus 4 319000 psi 2200 MPa ASTM D638
Tensile Strength
Yield 5 5950 psi 41.0 MPa ASTM D638
Yield 7400 psi 51.0 MPa ISO 527-2/50
Break 4 5950 psi 41.0 MPa ASTM D638
Tensile Elongation 4 (Break) 39 % 39 % ASTM D638
Flexural Modulus
-- 6 305000 psi 2100 MPa ASTM D790
-- 7 363000 psi 2500 MPa ISO 178
Flexural Strength
-- 6 8990 psi 62.0 MPa ASTM D790
-- 7 11000 psi 76.0 MPa ISO 178
Impact Nominal Value (English) Nominal Value (SI) Test Method
Charpy Notched Impact Strength 8 (73°F (23°C)) 11 ft·lb/in² 24 kJ/m² ISO 179/1eA
Notched Izod Impact
73°F (23°C), 0.125 in (3.18 mm) 6.4 ft·lb/in 340 J/m ASTM D256
73°F (23°C), 0.250 in (6.35 mm) 4.1 ft·lb/in 220 J/m ASTM D256
73°F (23°C) 8 10 ft·lb/in² 21 kJ/m² ISO 180/1A
Hardness Nominal Value (English) Nominal Value (SI) Test Method
ASTM D785
Rockwell Hardness (R-Scale) 109 109
ISO 2039-2
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Deflection Temperature Under Load ASTM D648
264 psi (1.8 MPa), Unannealed, 0.252 in (6.40
183 °F 84.0 °C
mm)
Vicat Softening Temperature 210 °F 99.0 °C ISO 306/B50

1 of 5 Form No. TDS-28339-en


UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved. Document Created: Tuesday, October 2, 2018
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: November 2000
Last Updated: 5/1/2018
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Starex SD-0150
Acrylonitrile Butadiene Styrene
LOTTE ADVANCED MATERIALS CO., LTD. www.ulprospector.com

Injection Nominal Value (English) Nominal Value (SI)


Drying Temperature
Desiccant Dryer 176 °F 80 °C
Hot Air Dryer 176 °F 80 °C
Drying Time
Desiccant Dryer 2.0 to 3.0 hr 2.0 to 3.0 hr
Hot Air Dryer 2.0 to 4.0 hr 2.0 to 4.0 hr
Suggested Max Moisture < 0.050 % < 0.050 %
Rear Temperature 320 to 356 °F 160 to 180 °C
Middle Temperature 374 to 392 °F 190 to 200 °C
Front Temperature 410 to 428 °F 210 to 220 °C
Nozzle Temperature 446 °F 230 °C
Mold Temperature 104 to 176 °F 40 to 80 °C
Injection Pressure 7110 to 21300 psi 49.0 to 147 MPa
Back Pressure 71.1 to 284 psi 0.490 to 1.96 MPa
Screw Speed 50 to 150 rpm 50 to 150 rpm
Injection Notes
Hot Runner Temperature: 230°C

Notes
1 These links provide you with access to supplier literature. We work hard to keep them up to date; however you may find the most current literature
from the supplier.
2 A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL Prospector continually works to link Yellow Cards to
individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the association
between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow Card Search.
3 Typical properties: these are not to be construed as specifications.
4 0.039 in/min (1.0 mm/min)
5 0.20 in/min (5.0 mm/min)
6 0.11 in/min (2.8 mm/min)
7 0.079 in/min (2.0 mm/min)
8 4mm

2 of 5 Form No. TDS-28339-en


UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved. Document Created: Tuesday, October 2, 2018
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: November 2000
Last Updated: 5/1/2018
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Starex SD-0150
Acrylonitrile Butadiene Styrene
LOTTE ADVANCED MATERIALS CO., LTD. www.ulprospector.com

Where to Buy

Supplier
LOTTE ADVANCED MATERIALS CO., LTD.
Seoul, South Korea
Telephone: +82-31-596-3408
Web: http://www.lotteadms.com/

3 of 5 Form No. TDS-28339-en


UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved. Document Created: Tuesday, October 2, 2018
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: November 2000
Last Updated: 5/1/2018
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Starex SD-0150
Acrylonitrile Butadiene Styrene
LOTTE ADVANCED MATERIALS CO., LTD. www.ulprospector.com

Distributor
Advanced Plastics, Inc
Telephone: 847-550-5556
Web: http://www.apikolon.com/
Availability: Mexico, North America, South America

ALBIS Plastic
ALBIS Plastic is a global distribution and compounding company. Contact ALBIS Plastic for availability of individual products per country.
Telephone: +49-40-78105-0
Web: http://www.albis.com/
Availability: Turkey

Amco Polymers
Telephone: 800-262-6685
Web: http://www.amcopolymers.com/
Availability: North America

Channel Prime Alliance


Telephone: 800-247-8038
Web: http://www.channelpa.com/
Availability: North America

ESSE International - OMYA


ESSE International - OMYA is a Pan European distribution company. Contact ESSE International - OMYA for availability of individual products
by country.
Telephone: +33-1-30-80-56-56
Web: http://www.omya.com
Availability: Europe

GAZECHIM PLASTIQUES
GAZECHIM PLASTIQUES is a Pan European distribution company. Contact GAZECHIM PLASTIQUES for availability of individual products
by country.
Telephone: +33-4-67-49-55-37
Web: http://www.gazechim.com/
Availability: Belgium, France, Netherlands, Romania, United Kingdom

M. Holland Canada Company


Telephone: 905-665-1168
Web: http://www.mholland.com/
Availability: Canada

M. Holland Company
Telephone: 855-497-1403
Web: http://www.mholland.com/
Availability: Mexico, United States

Osterman & Company


Telephone: 800-914-4437
Web: http://www.osterman-co.com/
Availability: North America

Telko Oy
Telko Oy is a Pan European distribution company. Contact Telko Oy for availability of individual products by country.
Telephone: +358-9-5211
Web: http://www.telko.com/
Availability: Denmark, Finland, Norway, Sweden

TER HELL PLASTIC GMBH


TER HELL PLASTIC is a Pan European distribution company. Contact TER HELL PLASTIC for availability of individual products by country.
Telephone: +49-232-3941-0
Web: http://www.terhell.de/
Availability: Germany

Tex-Co Resin Distribution, Inc.


Telephone: 877-908-3926
Web: http://www.texcoresin.com/
Availability: North America

4 of 5 Form No. TDS-28339-en


UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved. Document Created: Tuesday, October 2, 2018
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: November 2000
Last Updated: 5/1/2018
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Starex SD-0150
Acrylonitrile Butadiene Styrene
LOTTE ADVANCED MATERIALS CO., LTD. www.ulprospector.com

The Materials Group


Telephone: 616-863-6046
Web: http://thematerialsgroup.com/
Availability: North America

Ultrapolymers
Ultrapolymers is a Pan European distribution company. Contact Ultrapolymers for availability of individual products by country.
Telephone: +32-11-57-95-57
Web: http://www.ultrapolymers.com/
Availability: South Africa

5 of 5 Form No. TDS-28339-en


UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved. Document Created: Tuesday, October 2, 2018
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: November 2000
Last Updated: 5/1/2018
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.

You might also like