Scribd Logo
Upload

Welcome to Scribd!

  • 114 views

    Man Less Railway Gate Implementation Using Magnetic Sensor

    Uploaded by

    Ujjwal Kumar
    This document describes a project to implement a manless railway gate using a magnetic sensor. The magnetic sensor is fixed to the side of the train and activates the gate controller when a train passes over it. This causes the gate to close for at least 5 seconds to allow the entire train to pass through before reopening. Sensors are placed 1000 meters from the gate on both sides to detect approaching trains. The system uses a microcontroller, magnetic sensors, LEDs, motor drivers and motors to automatically open and close the gate as trains approach and pass to help prevent accidents at unattended railway crossings.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Man Less Railway Gate Implementation Using Magnetic Sensor

    Uploaded by

    Ujjwal Kumar
    114 views4 pages
    This document describes a project to implement a manless railway gate using a magnetic sensor. The magnetic sensor is fixed to the side of the train and activates the gate controller when a train passes over it. This causes the gate to close for at least 5 seconds to allow the entire train to pass through before reopening. Sensors are placed 1000 meters from the gate on both sides to detect approaching trains. The system uses a microcontroller, magnetic sensors, LEDs, motor drivers and motors to automatically open and close the gate as trains approach and pass to help prevent accidents at unattended railway crossings.

    Original Description:

    mini

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes a project to implement a manless railway gate using a magnetic sensor. The magnetic sensor is fixed to the side of the train and activates the gate controller when a train passes over it. This causes the gate to close for at least 5 seconds to allow the entire train to pass through before reopening. Sensors are placed 1000 meters from the gate on both sides to detect approaching trains. The system uses a microcontroller, magnetic sensors, LEDs, motor drivers and motors to automatically open and close the gate as trains approach and pass to help prevent accidents at unattended railway crossings.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    114 views4 pages

    Man Less Railway Gate Implementation Using Magnetic Sensor

    Uploaded by

    Ujjwal Kumar
    This document describes a project to implement a manless railway gate using a magnetic sensor. The magnetic sensor is fixed to the side of the train and activates the gate controller when a train passes over it. This causes the gate to close for at least 5 seconds to allow the entire train to pass through before reopening. Sensors are placed 1000 meters from the gate on both sides to detect approaching trains. The system uses a microcontroller, magnetic sensors, LEDs, motor drivers and motors to automatically open and close the gate as trains approach and pass to help prevent accidents at unattended railway crossings.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 4

    TECHNOFLY SOLUTIONS

    MAN LESS RAILWAY GATE IMPLEMENTATION USING


    MAGNETIC SENSOR

    ABSTRACT:

    Aim of this project is control the unmanned rail gate automatically using embedded
    platform. Today often we see news papers very often about the railway accidents happening
    at un-attended railway gates. Present project is designed to avoid such accidents if
    implemented in spirit. This project utilizes by powerful magnetic sensor, it is fixed at the side of
    the train and direction sensor activation time is so adjusted by calculating the time takenat a
    certain speed to cross at least one compartment of standard minimum size of
    theIndian railway, normally 5 seconds.

    The sensors are fixed at 1000 meters on both sides of the gate, When train cross the
    magnetic sensor it gives signal to the gatereceiver to close the gate. The buzzer is
    activated to clear the gate area for drivers about 5seconds. Gate motor is turned on in one
    direction and gate is closed, and stay closed tilltrain crosses the gate for time delay after
    that get activatedmotor turns in opposite direction and gate opens and motor stops .If there is
    any problem in the gate means it will operate red signal on both side from the driver
    indication.Train arrival and departure sensing can be achieved by means of Relaytechniques.
    When the wheels of the train moves over, both tracks are shorted to groundand this
    acts as a signal to microcontroller indicating train arrival. RED signalappears for
    the road user, once the train cuts the relay sensor placed before the 5Kms before the
    gate .A buzzer is made on as a pre cautionary measure for the road users

    www.technofly.in
    TECHNOFLY SOLUTIONS

    Magnetic
    Magnetic sensor
    Sensor

    MICRO

    CONTRO
    Red led
    LLER
    RESET
    AT89C52

    Green led

    CRYSTAL
    OSCILLAT
    Motor Motor
    OR
    driver

    STEP

    DOWN BRIDGE FILTER VOLTAGE


    REGULATOR
    TRANFORMER

    Power supply to all sections

    www.technofly.in
    TECHNOFLY SOLUTIONS

    SOFTWARE TOOLS:

    1. KEIL
    2. ORCAD
    3. AVR STUDIO
    4. RIDE
    5. WILPRO

    HARDWARE TOOLS:

    1. Micro controller
    2. Magnetic sensor
    3. Led
    4. Power supply
    5. Motor driver
    6. Motor

    ADVANTAGES :

    1. avoid man power


    2. reducing train accident
    3. more economic

    www.technofly.in
    TECHNOFLY SOLUTIONS

    APPLICATIONS:

    1. control stations
    2. industries

    www.technofly.in

    You might also like