Scribd Logo
Upload

Welcome to Scribd!

  • 98 views

    Pressure-Relief Damper

    Uploaded by

    Kumar sssss
    The Halton BRD pressure-relief damper is used in offshore and marine applications to regulate pressure in ductwork systems. It does not require an actuator as it opens passively in response to pressure changes. The opening pressure can be adjusted by positioning counterweights and is usually between 30-150 Pa. It has a leakage class up to 2 and can be installed horizontally or vertically in rectangular or circular ducts with dimensions up to 2400x2800 mm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pressure-Relief Damper

    Uploaded by

    Kumar sssss
    98 views4 pages
    The Halton BRD pressure-relief damper is used in offshore and marine applications to regulate pressure in ductwork systems. It does not require an actuator as it opens passively in response to pressure changes. The opening pressure can be adjusted by positioning counterweights and is usually between 30-150 Pa. It has a leakage class up to 2 and can be installed horizontally or vertically in rectangular or circular ducts with dimensions up to 2400x2800 mm.

    Original Description:

    35rt2rt

    Original Title

    BRD-2015

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Halton BRD pressure-relief damper is used in offshore and marine applications to regulate pressure in ductwork systems. It does not require an actuator as it opens passively in response to pressure changes. The opening pressure can be adjusted by positioning counterweights and is usually between 30-150 Pa. It has a leakage class up to 2 and can be installed horizontally or vertically in rectangular or circular ducts with dimensions up to 2400x2800 mm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    98 views4 pages

    Pressure-Relief Damper

    Uploaded by

    Kumar sssss
    The Halton BRD pressure-relief damper is used in offshore and marine applications to regulate pressure in ductwork systems. It does not require an actuator as it opens passively in response to pressure changes. The opening pressure can be adjusted by positioning counterweights and is usually between 30-150 Pa. It has a leakage class up to 2 and can be installed horizontally or vertically in rectangular or circular ducts with dimensions up to 2400x2800 mm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    BRD

    Pressure-Relief Damper

    Halton BRD pressure-relief dampers are used in offshore • Leakage class of closed damper up to class 2.
    and marine applications to regulate the pressure in the Contact Halton for more details.
    ductwork system. The Halton pressure relief dampers • Blades linked and open in parallel
    do not need an actuator or motor. The BRD dampers can • Opening pressure adjusted by changing the position
    be installed in rectangular or circular ducts horizontally of counterweight(s)
    or vertically. The damper is in closed position when • Opening pressure range between 30 Pa and 150 Pa
    the pressure in the duct is lower than the adjusted (up to 300 Pa optional)
    opening pressure. Opening pressure can easily be set • Counterweights included
    by adjusting weight of each damper/installation. Weights • Standard construction places weights on the right
    are included in the delivery. Pressure relief dampers can hand side, weights on the left hand side available as
    be supplied with non-standard dimensions on request. an option
    • Fixed frame in painted, galvanized or stainless steel. • Final adjustment of counterweights carried out
    Blades of galvanized or stainless steel. during commissioning
    • Models for horizontal or vertical installation • Maximum duct pressure for damper construction
    • Blades contain silicone seal to lower the leakage 5000 Pa and maximum air velocity 15 m/s. In case of
    through blades high duct pressure, contact Halton Marine for finding
    • Available as ATEX approved the most suitable solution.

    PART MATERIAL FINISHING

    Frame Carbon steel Painted or galvanised


    Frame Stainless steel EN 1.4301 (AISI304), EN 1.4404 (AISI316L), EN 1.4432 (AISI316L) -
    Blades Steel Galvanized
    Blades Stainless steel EN 1.4301 (AISI304), EN 1.4404 (AISI316L), EN 1.4432 (AISI316L) -
    Maintenance-free bearings Stainless steel EN 1.4404 (AISI316L) -
    Shafts Stainless steel EN 1.4404 (AISI316L) -

    BRD - Pressure-Relief Damper


    57
    BRD DIMENSIONS AND MATERIAL THICKNESS
    BRD pressure relief dampers meet international stan- Standard flange width 27 mm. Flanges and drilling also
    dards for both rectangular (width B 200-1200 mm available according to ISO 15138 standards. Modular
    and height H 200-1400 mm, 1 mm division) and circular construction sizes up to 2400x2800 mm are available.
    ducts (Ø100 - 1250 mm). Non-standard dimensions are Standard frame material thickness 3 mm. Blades are
    available on request. made of two sheets, each of being 0.8 mm thick.

    GENERAL BRD DRAWING BRD DRAWING TOP


    150
    WIDTH+58

    185 IF H=200
    20 IF H>200
    WIDTH+4 130
    nx150 nx150 Min 50

    27
    nx150 Min 50
    HEIGHT+58

    HEIGHT+58
    HEIGHT+4

    HEIGHT+4
    AIRFLOW
    nx150150

    252 (442)*
    10

    ALL BOLT HOLES Ø12 190


    * THIS DIMENSION AS OPTION
    BOLTS M10x30 WHEN ACTUATING MECHANISM
    NEEDS TO BE INSIDE DAMPER
    DEPTH

    BRD DRAWING, CIRCULAR CONNECTIONS BRD DRAWING, CIRCULAR CONNECTIONS

    150
    185 IF H=200

    185 IF H=200
    20 IF H>200

    20 IF H>200
    WIDTH+58 130
    nx150 nx150 Min 50
    Min 50

    DIAMETER-2
    HEIGHT+58
    nx150

    AIRFLOW AIRFLOW
    DIAMETER-2
    HEIGHT+58

    nx150

    364 (454*) 358 (448*)


    190 * THIS DIMENSION AS OPTION 190 * THIS DIMENSION AS OPTION
    WHEN ACTUATING MECHANISM WHEN ACTUATING MECHANISM
    10

    NEEDS TO BE INSIDE DAMPER NEEDS TO BE INSIDE DAMPER


    DEPTH DEPTH

    ALL BOLT HOLES Ø12


    BOLTS M10x30 BRD CIRCULAR, WITH CONNECTION FLANGES

    operation area
    185 IF H=200
    20 IF H>200

    AIRFLOW

    364 (454*)
    190 * THIS DIMENSION AS OPTION 190
    WHEN ACTUATING MECHANISM
    NEEDS TO BE INSIDE DAMPER
    DEPTH

    BRD - Pressure-Relief Damper


    58
    BRD PRODUCT MODELS AND ACCESSORIES OPERATION PRINCIPLE

    V6M09Y2015/Halton Marine reserves the right to alter products without notice.


    Models for horizontal and vertical installation Pressure-relief damper will allow one-way pressure relief
    available. Circular connection pieces are available. in the ductwork. This feature is based on imbalanced
    Standard construction places weights on the right hand blades. When the pressure in the duct rises above
    side. Weights on the left hand side available as an option. selected value (from 30 Pa to 150 Pa, up to 300 Pa
    optionally) the damper blades open to allow pressure
    relief. The minimum opening force can be adjusted with
    weights. When the pressure in the ductwork drops
    below minimum opening force required, the blades
    close and seal the duct.

    WEIGHTS OF HALTON MARINE BRD DAMPERS (KG)

    H/Height B / Width (mm)


    mm 200 300 400 500 600 700 800 900 1000 1100 1200 D2 ØD Weight
    200 12 12 14 16 19 20 22 24 26 28 29 mm kg
    300 13 15 18 20 21 24 26 29 31 34 35 200 15
    400 15 18 20 23 25 28 30 33 36 37 40 250 17
    500 17 21 24 27 29 32 35 37 40 43 45 315 21
    600 20 24 26 29 32 36 39 42 45 47 51 400 26
    700 23 26 30 33 37 40 43 47 50 53 57 500 36
    800 24 27 33 36 40 43 47 51 54 58 62 630 45
    900 28 32 36 39 44 48 52 56 60 63 67 800 63
    1000 30 34 39 43 48 51 55 60 64 68 72 1000 87
    1100 33 38 42 47 51 56 60 65 70 72 78 1250 116
    1200 35 40 45 50 54 59 64 69 74 78 84
    1300 38 44 48 53 58 64 69 74 79 83 89
    1400 40 46 51 56 62 67 73 78 83 88 94

    Weights include counter weights

    BRD - Pressure-Relief Damper


    59
    BRD - Pressure-Relief Damper
    60

    You might also like