Scribd
Upload
23 views2 pages

Radar Problem

The document asks three questions: 1) What is the peak power of a radar with 200W average power, 1μs pulse width, and 1000Hz pulse repetition frequency? 2) What is the range of this radar to detect a 2m^2 target at 2.9GHz using a 5m x 2.7m antenna with 60% efficiency and a minimum detectable signal of 10^-12W? 3) Sketch the receiver echo power vs range from 10-80nmi for this radar.

Uploaded by

bhaswati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
23 views2 pages

Radar Problem

The document asks three questions: 1) What is the peak power of a radar with 200W average power, 1μs pulse width, and 1000Hz pulse repetition frequency? 2) What is the range of this radar to detect a 2m^2 target at 2.9GHz using a 5m x 2.7m antenna with 60% efficiency and a minimum detectable signal of 10^-12W? 3) Sketch the receiver echo power vs range from 10-80nmi for this radar.

Uploaded by

bhaswati
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

PROBLEM 2

a) What is the peak power of a radar whose average transmitter power is 200 W, pulse
width of 1 μs, and a pulse repetition frequency of 1000 Hz?
b) What is the range (nmi) of this ground-based air surveillance radar if it has todettect a
targer with a radar coss section of 2 m2 when it operates at a frequency of2.9 GHz (S
band), with a rectangular-shaped antenna that is 5 m wide , 2.7m high, antenna
aperture efficiency ρa= 0.6, and minimum detectable signal equal to Smin =10-12 W
(based on Pt in the radar equation being the peak power)?
c) Sketch the receiver echo signal power as a function of range from 10 to 80 nmi.

You might also like