D_XL XLA XLB XLC_GB_05 ‘15

Hydraulic diaphragm
process metering pumps

API 675 XL XL A XL B XL C
䉴 䉴 䉴

The ultimate diaphragm process metering pump!

FLUID & METERING

 API 675
Hydraulic diaphragm process metering pumps

XL - XLA - XLB - XLC

XL pumps series (hydraulic diaphragm positive return) since they were launched on the market achieved
a great deal of success thanks to the incredible price/quality ratio. They were further developed and
improved with the XLB and XLC pumps. These pumps, with cast iron casing, designed and manufactured
in full conformity with API 675 STD and ATEX 94/9/CE, zone of danger 1/21 e 2/22, are suitable for 24/7
demanding industrial applications.
As all OBL hydraulic diaphragm, these pumps come with built-in relief valve, air purge valve and
mechanically actuated re-plenishing (smart diaphragm).
This valve guarantees at all times a constant hydraulic balance that overcomes all suction problems
(suction valve closing, decreasing of NPSH available).
In case of worsening of the NPSH available, though volumetric efficiency would decrease,
pump would still deliver chemical.
In case of complete closing of suction isolating valve, pump would not over-replenish oil
and diaphragm would not be over-stretched.
Once operating condition are restored, pump automatically starts delivering with no
damage whatsoever.

Constructional data
• Hydraulic diaphragm pump (single or double), with rupture detector Applications field:
both visual as well as remote (via pressure switch or pressure • OIL&GAS
transmitter for both safe and hazardous areas). • CHEMICAL AND PETRO-CHEMICAL
• Design fully conforming with API 675 STD. • POWER GENERATION
• Performances conforming to API 675 STD: • WATER TREATMENT
±1% steady state accuracy between 10 and 100% of rated capacity;
± 3% linearity between 10 and 100% of rated capacity;
• PULP & PAPER
± 3% repeatability between 10 and 100% of rated capacity. • DEMINERALISATION AND RO PLANTS

• Thanks to unique design, pump head can be dismantled and diaph

ragm checked, with no oil loss.

• Zero flow rate when pressure is zero and adjustment being set to “0%.

• Reduced maintenance; sealess oil-bathed plunger that guarantees

as-new volumetric efficiency even after 50000 working hours.
Diaphragm, protected by built-in relief valve and mechanical repleni
sher has working life in excess of 50000 working hours.

• Multiple pumps arrangement on demand (each pump can have

different pump size, strokes/1’ and wetted materials). These series can
be ganged with other positive return pumps (L or X9 series);
adjustment can be either independent or common.

• Standard automatic adjustment is via 0,1% steps knob.

2 • Pumps can be supplied with either electrical or pneumatic actuators
(for both safe and hazardous areas) as well as with VSD rated motors.

• Wetted materials are: AISI 316L, PP, PVC and PVDF. On demand exotic
Five headed XLB metering pump with
materials (alloy 20, Hastelloy C 276, Titanium) can be supplied. independent manual adjustments. AISI 316L wetted
parts pump head with double diaphragm and visual rupture detector.
• IEC as standard but NEMA motors can be supplied too. Pump conforms to ATEX 94/9/CE, suitable, thanks to the double hydraulic diaph-
ragm system, fo dosing of flammable, toxic and explosive chemicals.
 Control systems
Z type electrical actuator >
XL/XLB/XLC can be equipped with Z type electri-
cal actuator, with following characteristics:
XLB double hydraulic diaphragm
• IP 66 STD
metering pump with PVDF wetted
parts. Diaphragm rupture detector
• Manual emergency override
via ATEX II 2 G Ex-d IIC T6. pressu- • Anticondensation heater (on demand)
re switch. Because of the pH of the • Non standard voltages and frequencies
dosed chemical pressure switch had • External automatic/manual selector
to be protected by a PTFE diaph-
ragm fitted into two in Hastelloy C Flow rate is adjusted according to following
276 © backing rings. input signals:
Because of the weight of the pres-
sure switch and its protection • 4-20 mA, 0-20 A, 20-4 mA e 0-10 V
system they are both supported • Pulses (0÷2 Hz - 0÷30 Hz)
by a bar made of AISI 316 bar. • RS 485 protocol
Same material is used for the base-
• PROFIBUS DP - VØ
Automatic adjustments

plate to comply with stringent

project specifications. >
Electrical actuator >

• ATEX II 2GD EEx-d IIB T4 IP6X

• 115/230V - 1 - 50/60 Hz
• 230/400V - 3 - 50/60 Hz
• 4-20 mA signal and feedback
• Manual emergency override
• Anticondensation heater (on demand)

W type pneumatic actuator >

• ATEX II 2G c IIC T6
• Pneumatic actuator type WA.
• Air instrument 3÷15 PSI
• Air supply 4-6 bar
• Emergency manual override

Knob >
Manual adjustment

• Micrometer control reading 0-100%.

• 0,1% steps sealed magnifying lens indicator.

XL pump with single diaphragm and

3
PVDF wetted parts. Automatic adjust-
ment of the flow rate via OBL-designed
electrical actuator that being IP66 and
thanks to the anticondensation heater,
turns out to be suitable for installation
in harsh environments such as saline
and/or desertic areas with high humidity
and wide temperature variation.
 XL
Pump : • Single and multiple up to 6 heads

Max flow rate : • 480 L/h

Max pressure : • 15 bar

Motors : • Threephase 0,37 kW - 0,75 kW - 1,5 kW

230/400 V - 50/60Hz - 4 poles
IP55 - CLF - IEC38

Stroke : • 15/25mm

Materials : • Cast iron pump body

We i g t h : • 60÷70 Kgs

480 l/h 15 bar API 675

XL pump technically advanced hydraulic diaphragm positive return pump, low
cost, due to reduced number of components; can be used in both process and ser-
vice applications.
• Hydraulic diaphragm metering pump both single and double
• Threaded (BSP female) or flanged connections (both DIN or ANSI)
• Fully conforming with API 675 STD
• Fully conforming with ATEX 94/9/CE, 1/21 and 2/22 zone of danger. Suitable for flammable chemicals
thanks to the double diaphragm system
• PP wetted parts (single diaphragm only), AISI 316L, PVC e PVDF (with single and double diaphragm design)
• With PP, AISI 316L and PVDF wetted parts up to 60 °C pumping temperature
• With PVC wetted parts up to 40 °C pumping temperature

< Two-headed XL.

Each pump can have different number
of strokes/1’ and different wetted
materials.
 Technical characteristics
MAX PVS SET PRESS. bar g CONNECTIONS
< XL single hydraulic diaphragm TYPE STROKES/1’ FLOW RATE
l/H FLANGED
pump head with injection moulded WORK PRES. PVS kW THREADED UNI ANSI
glass filled PP and threaded connec-
tions. Max pressure up to 15 bar g.
50 Hz
PP-PP11-PP32
XL 15.50 40 63 12 15 0,37 1/2” BSPF DN15-PN16 1/2” 150
XL 25.50 40 105 12 15 0,37 1/2” BSPF DN15-PN16 1/2” 150
XL 25.50 60 155 12 15 0,37 1/2” BSPF DN20-PN16 3/4” 150
XL 25.50 82 215 12 15 0,75 1/2” BSPF DN20-PN16 3/4” 150
XL 25.50 100 260 12 15 0,75 3/4” BSPF DN20-PN16 3/4” 150
XL 25.50 123 320 12 15 0,75 3/4” BSPF DN20-PN16 3/4” 150
XL 25.50 140 370 11 14 0,75 1” BSPF DN25-PN16 1” 150
XL 25.50 160 430 10 13 0,75 1” BSPF DN25-PN16 1” 150
XL 25.50 185 480 8 10 0,75 1” BSPF DN25-PN16 1” 150
MA-MMA
XL 15.50 40 63 12 15 0,37 1/2” BSPF DN15-PN16 1/2” 150
XL 25.50 40 105 12 15 0,37 1/2” BSPF DN15-PN16 1/2” 150
XL 25.50 60 155 12 15 0,37 1/2” BSPF DN20-PN16 3/4” 150
XL 25.50 82 215 12 15 0,75 1/2” BSPF DN20-PN16 3/4” 150
XL 25.50 100 260 12 15 0,75 3/4” BSPF DN20-PN16 3/4” 150
XL 25.50 123 320 12 15 0,75 3/4” BSPF DN20-PN16 3/4” 150
XL 25.50 140 370 11 14 0,75 1” BSPF DN25-PN16 1” 150
XL 25.50 160 430 10 13 0,75 1” BSPF DN25-PN16 1” 150
XL 25.50 185 480 8 10 0,75 1” BSPF DN25-PN16 1” 150
MP-MMP/MS-MMS
XL 15.50 40 63 12 15 0,37 - DN15-PN16 1/2” 150
XL 25.50 40 105 12 15 0,37 - DN15-PN16 1/2” 150
XL 25.50 60 155 12 15 0,37 - DN20-PN16 3/4” 150
XL 25.50 82 215 12 15 0,75 - DN20-PN16 3/4” 150
XL 25.50 100 260 12 15 0,75 - DN25-PN16 1” 150
XL 25.50 123 320 12 15 0,75 - DN25-PN16 1” 150
XL 25.50 140 370 11 14 0,75 - DN25-PN16 1” 150
XL 25.50 160 430 10 13 0,75 - DN25-PN16 1” 150
XL 25.50 185 480 8 10 0,75 - DN25-PN16 1” 150

60 Hz
PP-PP11-PP32
XL 15.50 48 76 12 15 0,37 1/2” BSPF DN15-PN16 1/2” 150
XL 25.50 48 126 12 15 0,37 1/2” BSPF DN15-PN16 1/2” 150
XL 25.50 72 186 12 15 0,75 1/2” BSPF DN20-PN16 3/4” 150
XL 25.50 96 258 12 15 0,75 3/4” BSPF DN20-PN16 3/4” 150
XL 25.50 121 312 12 15 0,75 3/4” BSPF DN20-PN16 3/4” 150
XL 25.50 144 384 11 14 0,75 1” BSPF DN25-PN16 1” 150
XL 25.50 168 444 10 13 0,75 1” BSPF DN25-PN16 1” 150
MA-MMA
XL 15.50 48 76 12 15 0,37 1/2” BSPF DN15-PN16 1/2” 150
XL 25.50 48 126 12 15 0,37 1/2” BSPF DN15-PN16 1/2” 150
XL 25.50 72 186 12 15 0,75 1/2” BSPF DN20-PN16 3/4” 150
XL 25.50 96 258 12 15 0,75 3/4” BSPF DN20-PN16 3/4” 150
XL 25.50 121 312 12 15 0,75 3/4” BSPF DN20-PN16 3/4” 150
XL 25.50 144 384 11 14 0,75 1” BSPF DN25-PN16 1” 150
XL 25.50 168 444 10 13 0,75 1” BSPF DN25-PN16 1” 150
< XL pump with single diaphragm MP-MMP/MS-MMS
XL 15.50 48 76 12 15 0,37 -. DN15-PN16 1/2” 150
and moulded glass fibre reinforced XL 25.50 48 126 12 15 0,37 - DN15-PN16 1/2” 150
XL 25.50 72 186 12 15 0,75 - DN20-PN16 3/4” 150
PP wetted parts. Automatic adjust- XL 25.50 96 258 12 15 0,75 - DN25-PN16 1” 150
ment of the flow rate via OBL-desi- XL 25.50 121 312 12 15 0,75 - DN25-PN16 1” 150
XL 25.50 144 384 11 14 0,75 - DN25-PN16 1” 150
gned electrical (IP66 as STD). The XL 25.50 168 444 10 13 0,75 - DN25-PN16 1” 150
robustness of the PP wetted parts
allows dosing of any chemicals where
AISI 316L would be unsuitable, at a OVERALL DIMENSIONS M ATERIALS OF CONSTRUCTION
working pressure up to 12 bar g.
With the same pump head, combi- MA MP MS
PARTS PP PP11 PP32 MMA MMP MMS
ning metallic seats and balls (AISI
316L, incoloy 825, Hastelloy C 276
®), it is possible to offer premium LIQUID END PP PP PP AISI 316L PVC PVDF
quality/price versions for dosing pro- DIAPHRAGM PTFE PTFE PTFE PTFE PTFE PTFE
blematic chemicals such as 50% cau- VALVE SEAT PVC AISI 316L INCOLOY 825 AISI 316L PVC PVDF
stic, viscous polymers and concentra-
VALVE GUIDE PP PP PP AISI 316L PP PVDF
ted sulphuric acid.
VALVE PIREX AISI 316L HASTELLOY C 276 AISI 316L PIREX PIREX
VALVE HOUSING PP PP PP AISI 316L PVC PVDF
VALVE SEAL FPM FPM FPM FPM FPM FPM
FLANGE PVC PVC PVC AISI 316L PVC PVDF

MODEL NUMBER
KEY TO SYMBOL
PUMP TYPE
ø PLUNGER
PP PP EXECUTION
5
PP11 PP+AISI-316L VALVE & VALVE SEAT
Z 4÷20 mA OBL ELECTRIC ACTUATOR
XL 25 50 PP 120 F Z W 0,2-1 BAR PNEUMATIC ACTUATOR
... THREADED CONNECTIONS
F UNI-DIN FLANGED CONNECTIONS
FA ANSI FLANGED CONNECTIONS
N° STROKES PER MINUTE
STROKE mm.
 XL A 䉴

Pump : • Single and multiple up to14 heads

Max flow rate : • 20 L/h

Max pressure : • 200 bar

Motors : • Threephase 0,37 kW (size 71-B14)

0,75 kW (size 80-B14) 50/60Hz-230/480 V
Unel Mec STD-4 poles-IP55-CLF-IEC34-1

Stroke : • 6 mm

Materials : • Cast iron casing

We i g t h : • 35 Kgs

20 l/h 200 bar API 675

XLA pump is a low flow-high pressure hydraulically balanced diaphragm metering pump.
Like the XL series includes a dependable stroke adjustment mechanism that generates true mechanical full motion
performance over a 10:1 turndown. The API675 compliant design includes double diaphragm leak detection as standard.

Diaphragn metering pumps deliver more than you expect

• PRECISION FLOW CONTROL
The rugged full motion variable eccentric offers 0-100% adjustment with a +/- 1% accuracy
over a 10:1turndown. An advanced hydraulic management system assures consistent
performanceand rapid recovery from system upsets.

• CHEMICAL DUTY
The double PTFE leak detection diaphragm and component check ceramic seats and
ruby balls offers outsanding chemical durability for your most
demanding applications.

• LONG LIFE
Full casting iron/steel drive end with rolling element bearing and
bronze worm gearing ensures the long life and worry free operation.
Oil bath lubrification with level sight glass makes preventative
maintenance checks easy.

• STANDARDS
Designed and tested to API675 standards. Fully CE and ATEX
compliant. Close coupled motor frames of 71-B14 Unel Mec
6 (and 56C Nema available).
Small footprint and modular multiplexing provide predictable footprint
requirements.
 Technical characteristics
MAX FLOW RATE L/H MAX CONNECTIONS

PER MIN.

NPSH-R
STROKES
MIN FLOW RATE L/H PRESSURE
< XLA single hydraulic diaphragm PUMP BAR THREADED FLANGED
WORKING PRESSURE BAR
pump head flanged connections. 200 175 150 130 100 80 60 40 20 10 WORK PSV A UNI ANSI

50 Hz
XLA.12 100 1,25 1,6 1,8 2,1 2,35 2,55 2,8 3 3,2 10 210 250 1/4"NPT f DN15 1/2"ANSI
0,2 0,2 0,2 0,2 0,2 0,3 0,3 0,3 0,3
XLA.12 118 1,55 1,9 2,2 2,5 2,8 3,1 3,35 3,65 3,9 10 210 250 1/4"NPT f DN15 1/2"ANSI
0,2 0,2 0,2 0,3 0,3 0,3 0,3 0,4 0,4
XLA.12 145 2 2,3 2,7 3,1 3,4 3,7 4 4,3 4,6 10 210 250 1/4"NPT f DN15 1/2"ANSI
0,2 0,25 0,3 0,3 0,3 0,4 0,4 0,4 0,45
XLA.12 182 2,5 3 3,4 3,8 4,2 4,9 5,3 5,7 6,1 10 210 250 1/4"NPT f DN15 1/2"ANSI
0,25 0,3 0,3 0,4 0,4 0,5 0,5 0,6 0,6
XLA.15 25 - - - 1,1 1,15 1,15 1,2 1,25 1,3 1,35 10 130 155 1/4"NPT f DN15 1/2"ANSI
- - - 0,15 0,15 0,15 0,15 0,15 0,15 0,15
XLA.15 36 - - - 1,6 1,65 1,7 1,75 1,8 1,85 1,9 10 130 155 1/4"NPT f DN15 1/2"ANSI
- - - 0,2 0,2 0,2 0,2 0,2 0,2 0,2
XLA.15 50 - - - 2,2 2,3 2,35 2,4 2,5 2,55 2,6 10 130 155 1/4"NPT f DN15 1/2"ANSI
- - - 0,3 0.3 0,3 0,3 0,3 0,3 0,3
XLA.15 70 - - - 3,1 3,2 3,3 3,4 3,5 3,6 3,65 10 130 155 1/4"NPT f DN15 1/2"ANSI
- - - 0,35 0,35 0,35 0,35 0,35 0,35 0,35
XLA.15 100 - - - 4,2 4,4 4,5 4,6 4,8 4,85 4,9 10 130 155 1/4"NPT f DN15 1/2"ANSI
- - - 0,4 0,4 0,4 0,4 0,4 0,4 0,4
XLA.15 118 - - - 5,1 5,2 5,4 5,6 5,8 5,9 5,95 10 130 155 1/4"NPT f DN15 1/2"ANSI
- - - 0,5 0,5 0,5 0,5 0,5 0,5 0,5
XLA.15 145 - - - 6,5 6,6 6,8 7 7,3 7,4 7,5 10 130 155 1/4"NPT f DN15 1/2"ANSI
- - - 0,6 0,6 0,7 0,8 0,8 0,8 0,9
XLA.15 182 - - - 8,1 8,3 8,5 8,8 9,2 9,3 9,4 10 130 155 1/4"NPT f DN15 1/2"ANSI
- - - 0,7 0,8 0,8 0,9 1 1 1
XLA.18 118 - - - - 8,2 8,5 8,8 9,1 9,2 9,3 10 100 120 1/4"NPT f DN15 1/2"ANSI
- - - - 0,7 0,7 0,7 0,7 0,7 0,7
XLA.18 145 - - - - 10,3 10,7 11,9 11,5 11,6 11,7 10 100 120 1/4"NPT f DN15 1/2"ANSI
- - - - 1 1 1 1,2 1,2 1,2
XLA.20 118 - - - - - 10,6 11 11,4 11,5 11,6 9,5 80 96 1/4"NPT f DN15 1/2"ANSI
- - - - - 1,2 1,2 1,2 1,2 1,2
XLA.20 145 - - - - - 13,4 13,8 14,4 14,5 14,6 9,5 80 96 1/4"NPT f DN15 1/2"ANSI
- - - - - 1,3 1,3 1,4 1,5 1,5
XLA.25 100 - - - - - - *12,9 14,1 11,6 11,7 9 *50 60 1/4"NPT f DN15 1/2"ANSI
- - - - - - 1,2 1,2 1,2 1,2
XLA.25 118 - - - - - - *15,6 17,1 17,8 17,9 9 *50 60 1/4"NPT f DN15 1/2"ANSI
- - - - - - 1,5 1,7 1,8 1,8
XLA.25 145 - - - - - - *19,7 21,5 22,5 22,6 9 *50 60 1/4"NPT f DN15 1/2"ANSI
- - - - - - 2 2,2 2,3 2,3

60 Hz
XLA.12 84 1,5 1,92 2,16 2,52 2,82 3,6 3,36 3,6 3,84 10 210 250 1/4"NPT f DN15 1/2"ANSI
0,2 0,2 0,2 0,2 0,2 0,4 0,4 0,4 0,4
XLA.12 119 1,86 2,28 2,64 3 3,36 3,72 4,02 4,38 4,68 10 210 250 1/4"NPT f DN15 1/2"ANSI
0,2 0,2 0,2 0,4 0,4 0,4 0,4 0,5 0,5
XLA.12 138 2,4 2,76 3,24 3,72 4,08 4,44 4,8 5,16 5,52 10 210 250 1/4"NPT f DN15 1/2"ANSI
0,2 0,2 0,4 0,4 0,4 0,5 0,5 0,5 0,5
XLA.12 175 3 3,6 4,08 4,56 5,04 5,88 6,36 6,84 7,32 10 210 250 1/4"NPT f DN15 1/2"ANSI
0,3 0,4 0,4 0,5 0,5 0,6 0,6 0,7 0,7
XLA.15 30 - - - 1,3 1,35 1,4 1,45 1,5 1,55 1,6 10 130 150 1/4"NPT f DN15 1/2"ANSI
- - - 0,15 0,15 0,15 0,15 0,15 0,15 0,15
XLA.15 43 - - - 1,9 1,95 2 2,1 2,15 2,2 2,25 10 130 150 1/4"NPT f DN15 1/2"ANSI
- - - 0,2 0,2 0,2 0,2 0,2 0,2 0,2
XLA.15 60 - - - 2,7 2,75 2,8 2,9 3 3,05 3,1 10 130 150 1/4"NPT f DN15 1/2"ANSI
- - - 0,3 0.3 0,3 0,3 0,3 0,3 0,3
XLA.15 84 - - - 3,75 3,9 4 4,1 4,2 4,3 4,35 10 130 150 1/4"NPT f DN15 1/2"ANSI
- - - 0,35 0,35 0,35 0,35 0,35 0,35 0,35
XLA.15 119 - - - 5,3 5,4 5,6 5,8 6 6,1 6,15 10 130 150 1/4"NPT f DN15 1/2"ANSI
- - - 0,4 0,4 0,4 0,4 0,4 0,4 0,4
XLA.15 138 - - - 6,2 6,3 6,4 6,7 6,9 7 7,1 10 130 150 1/4"NPT f DN15 1/2"ANSI
- - - 0,5 0,5 0,5 0,5 0,5 0,5 0,5
XLA.15 175 - - - 7,8 8 8,2 8,5 8,8 8,9 9 10 130 150 1/4"NPT f DN15 1/2"ANSI
- - - 0,6 0,6 0,7 0,8 0,8 0,8 0,9
XLA.18 138 - - - - 9,8 10,2 10,5 10,9 11 11,1 10 100 120 1/4"NPT f DN15 1/2"ANSI
- - - - 1 1 1 1 1,2 1,2
XLA.18 175 - - - - 12,4 13 13,4 13,9 14 14,1 10 100 120 1/4"NPT f DN15 1/2"ANSI
- - - - 1,3 1,3 1,4 1,5 1,5 1,5
XLA.20 138 - - - - - 12,8 13,2 13,7 13,8 13,9 9,5 80 96 1/4"NPT f DN15 1/2"ANSI
- - - - - 1,5 1,5 1,5 1,5 1,5
XLA.20 175 - - - - - 16,2 16,7 17,3 17,5 17,6 9,5 80 96 1/4"NPT f DN15 1/2"ANSI
- - - - - 1,5 1,5 1,5 1,5 1,5
XLA.25 119 - - - - - - *16,2 16,9 18,4 18,6 9 *50 60 1/4"NPT f DN15 1/2"ANSI
- - - - - - 1,5 1,5 1,5 1,5
XLA.25 138 - - - - - - *18,7 19,6 21,4 21,5 9 *50 60 1/4"NPT f DN15 1/2"ANSI
- - - - - - 1,5 1,5 1,5 1,5

< Two-headed XLA.

Each pump can have different number OVERALL DIMENSIONS M ATERIALS OF CONSTRUCTION
of strokes/1’ and different wetted
materials.
PARTS A P
45°

LIQUID END AISI 316L PVC

~375 mm.

DIAPHRAGM PTFE PTFE

05
~1

VALVE SEAT CERAMIC CERAMIC

VALVE GUIDE AISI 316L PVC

VALVE (BALL) RUBY RUBY

~385 mm. ~420 mm.
VALVE SEAL FPM FPM

MODEL NUMBER 7
KEY TO SYMBOL
PUMP TYPE

ø PLUNGER
XLA 15 A 84 FA ANSI FLANGED CONNECTIONS (if equipped)

N° STROKES PER MINUTE

AISI 316L PUMP HEAD

 XL B 䉴

Pump : • Single and multiple up to 6 heads

Max flow rate : • 430 L/h

Max pressure : • 40 bar

Motors : • Threephase 0,75 kW - 1,5 kW

230/400 V - 50/60Hz - 4 poles
IP55 - CLF - IEC38

Stroke : • 15/25mm

Materials : • Cast iron pump body

We i g t h : • 60÷70 Kgs

430 l/h 40 bar API 675

XLB hydraulic diaphragm positive return pump, suitable for industrial process
applications; heavy duty mechanism for operating pressures up to 35 bar, suitable
for 24h/7 duties.
• Hydraulic diaphragm metering pump both single and double
• Threaded (BSP female) or flanged connections (both DIN or ANSI)
• Fully conforming with API 675 STD
• Fully conforming with ATEX 94/9/CE, 1/21 and 2/22 zone of danger. Suitable for flammable
chemicals thanks to the double diaphragm system
• AISI 316L, PVC e PVDF wetted parts (with single and double diaphragm design)
• With AISI 316L and PVDF wetted parts up to 60 °C pumping temperature
• With PVC wetted parts up to 40 °C pumping temperature

< Three-headed XLB pump

with AISI 316L wetted parts.
 Technical characteristics
MAX PVS SET PRESS. bar g CONNECTIONS
< XLB single hydraulic diaphragm TYPE STROKES/1’ FLOW RATE
l/H 0,37 kW 0,75 kW 1,5 kW FLANGED
pump head with AISI 316L wetted W.PRES PSV W.PRES PSV W.PRES PSV
THREADED UNI ANSI
parts and ANSI # 300 RF flanged
connections.
50 Hz
MA - MMA
Max pressure up to 30 bar g. XLB 15.50 40 63 12 15 35 40 - - 11/2” BSPF DN15-PN40 1/2” 300
XLB 25.50 40 105 12 15 35 40 - - 11/2” BSPF DN15-PN40 1/2” 300
XLB 25.50 60 155 12 15 25 30 - - 11/2” BSPF DN20-PN40 3/4” 300
XLB 25.50 82 215 8 10 16 20 25 30 11/2” BSPF DN20-PN40 3/4” 300
XLB 25.50 100 260 - - 15 18 25 30 3/4” BSPF DN20-PN40 3/4” 300
XLB 25.50 123 320 - - 12 15 25 30 3/4” BSPF DN20-PN40 3/4” 300
XLB 25.50 140 370 - - 11 14 20 25 1” BSPF DN25-PN40 1” 300
XLB 25.50 160 430 - - 10 13 16 20 1” BSPF DN25-PN40 1” 300

MS - MMS
XLB 15.50 40 63 12 15 15 18,5 - - - DN15-PN25 1/2” 150
XLB 25.50 40 105 12 15 15 18,8 - - - DN15-PN25 1/2” 150
XLB 25.50 60 155 12 15 15 18,5 - - - DN20-PN25 3/4” 150
XLB 25.50 82 215 8 10 15 18,5 - - - DN20-PN25 3/4” 150
XLB 25.50 100 260 - - 15 18,5 - - - DN25-PN25 1” 300
XLB 25.50 123 320 - - 12 15 15 18,5 - DN25-PN25 1” 300
XLB 25.50 140 370 - - 11 14 15 18,5 - DN25-PN25 1” 300
XLB 25.50 160 430 - - 10 13 15 18,5 - DN25-PN25 1” 300

60 Hz
MA - MMA
XLB 15.50 48 76 12 15 35 40 - - 11/2” BSPF DN15-PN40 1/2” 300
XLB 25.50 48 126 12 15 35 40 - - 11/2” BSPF DN15-PN40 1/2” 300
XLB 25.50 72 186 12 15 18 22 25 30 11/2” BSPF DN20-PN40 3/4” 300
XLB 25.50 96 258 - - 15 18 25 30 3/4” BSPF DN20-PN40 3/4” 300
XLB 25.50 121 312 - - 12 15 25 30 3/4” BSPF DN20-PN40 3/4” 300
XLB 25.50 144 384 - - 11 14 20 25 1” BSPF DN25-PN40 1” 300
XLB 25.50 168 444 - - 10 12 16 20 1” BSPF DN25-PN40 1” 300

MS - MMS
XLB 15.50 48 76 12 15 15 18,5 - - - DN15-PN25 1/2” 150
XLB 25.50 48 126 12 15 15 18,5 - - - DN15-PN25 1/2” 150
XLB 25.50 72 186 12 15 15 18,5 - - - DN20-PN25 3/4” 150
XLB 25.50 96 258 - - 15 18,5 - - - DN25-PN25 1” 150
XLB 25.50 121 312 - - 12 15 15 18,5 - DN25-PN25 1” 150
XLB 25.50 144 384 - - 11 14 15 18,5 - DN25-PN25 1” 150
XLB 25.50 168 444 - - 10 12 15 18,5 - DN25-PN25 1” 150

< XLB metering pump with ANSI # OVERALL DIMENSIONS M ATERIALS OF CONSTRUCTION
300 RF flanged connections (max
pressure up to 30 bar g), double
hydraulic diaphragm, AISI 316L wet- PARTS MA/MMA MS/MMS
ted parts and visual rupture detector
via pressure gauge. Pump fully LIQUID END AISI 316L PVDF
conforms to ATEX 94/9/CE and API
DIAPHRAGM PTFE PTFE
STD 675.
VALVE SEAT AISI 316L PVDF
VALVE GUIDE AISI 316L PVDF
VALVE AISI 316L PIREX
VALVE HOUSING AISI 316L PVDF
VALVE SEAL FPM FPM
FLANGE AISI 316L PVDF

MODEL NUMBER
KEY TO SYMBOL
PUMP TYPE
ø PLUNGER
MA AISI 316L EXECUTION
9
MS PVDF EXECUTION
Z 4÷20 mA OBL ELECTRIC ACTUATOR
XLB 25 50 MA 120 FA Z W 0,2-1 BAR PNEUMATIC ACTUATOR
... THREADED CONNECTIONS
F UNI-DIN FLANGED CONNECTIONS
FA ANSI FLANGED CONNECTIONS
N° STROKES PER MINUTE
STROKE mm.
 XL C 䉴

Pump : • Single and multiple up to 6 heads

Max flow rate : • 1500 L/h

Max pressure : • 20 bar

Motors : • Trifase 0,75 kW - 1,5 kW - 2,2 kW

230/400 V - 50/60Hz - 4 poli
IP55 - CLF - IEC38

Stroke : • 44,5 mm

Materials : • Cast iron pump body

We i g t h : • 170 Kgs

1500 l/h 20 bar API 675

XLC pumps have high STD basic version: flanged connections and double diaphragm with
local visual rupture detection via pressure gauge, suitable for dangerous toxic, flammable
and even explosive chemicals. XLC pumps are suitable for 24/7 industrial applications.
• Double hydraulic diaphragm metering pumps
• Flanged connections only (either DIN or ANSI)
• Fully conforming with API 675 STD
• Fully conforming with ATEX 94/9/CE, 1/21 and 2/22 zone of danger. Suitable for flammable
chemicals thanks to the double diaphragm system
• AISI 316L, PVC e PVDF wetted parts
• With AISI 316L and PVDF wetted parts up to 75 °C pumping temperature
• With PVC wetted parts up to 40 °C pumping temperature

10
< XLC PVC basic version with:
double diaphragm with local visual
rupture detector and flanged con-
nections.
 Technical characteristics
MAX MAX PRESSURE - PVS SET PRESS. bar g FLANGED CONNECTIONS
< XLC pump with double hydraulic TYPE STROKES/1’ FLOW RATE
diaphragm, rupture detector via both l/H 0,75 kW 1,5 kW 2,2 kW UNI ANSI
pressure gauge and pressure switch
(local/remote).
50 Hz
AISI 316L
AISI 316L/PTFE wetted materials only XLC A 40 350 14 20 20 DN 25 1” 300RF
and threaded connection to DIN XLC A 60 550 10 20 20 DN 25 1” 300RF
XLC A 82 750 8 17 20 DN 40 1 1/ 2” 300RF
11851. XLC A 100 920 6 12 17 DN 40 1 1/ 2” 150RF
XLC A 123 1150 - 10 15 DN 40 1 1/ 2” 150RF
XLC A 140 1300 - 8 12 DN 40 1 1/ 2” 150RF
XLC A 160 1500 - 6 12 DN 40 1 1/ 2” 150RF
PVC
XLC P 40 350 12 12 - DN 25 1” 150RF
XLC P 60 550 10 12 - DN 25 1” 150RF
XLC P 82 750 8 12 - DN 40 2” 150RF
XLC P 100 920 6 12 12 DN 40 2” 150RF
XLC P 123 1150 - 10 12 DN 40 2” 150RF
XLC P 140 1300 - 8 12 DN 40 2” 150RF
XLC P 160 1500 - 6 12 DN 40 2” 150RF
PVDF
XLC S 40 350 14 18,5 - DN 25 1” 150RF
XLC S 60 550 10 18,5 - DN 25 1” 150RF
XLC S 82 750 8 17 18,5 DN 40 2” 150RF
XLC S 100 920 6 12 17 DN 40 2” 150RF
XLC S 123 1150 - 10 15 DN 40 2” 150RF
XLC S 140 1300 - 8 12 DN 40 2” 150RF
XLC S 160 1500 - 6 12 DN 40 2” 150RF

60 Hz
AISI 316L
XLC A 48 420 13 20 20 DN 25 1” 300RF
XLC A 72 660 10 17 20 DN 25 1” 300RF
XLC A 96 900 6 12 17 DN 40 1 1/ 2” 300RF
XLC A 121 1150 - 10 15 DN 40 1 1/ 2” 150RF
XLC A 144 1300 - 8 12 DN 40 1 1/ 2” 150RF
XLC A 165 1540 - 6 12 DN 40 1 1/ 2” 150RF
PVC
XLC P 48 420 12 12 - DN 25 1” 150RF
XLC P 72 660 10 12 - DN 25 1” 150RF
XLC P 96 900 6 12 12 DN 40 2” 150RF
XLC P 121 1150 - 10 12 DN 40 2” 150RF
XLC P 144 1300 - 8 12 DN 40 2” 150RF
XLC P 165 1540 - 6 12 DN 40 2” 150RF
PVDF
XLC S 48 420 12 18,5 - DN 25 1” 150RF
XLC S 72 660 10 18,5 - DN 25 1” 150RF
XLC S 96 900 6 12 17 DN 40 2” 150RF
XLC S 121 1150 - 10 15 DN 40 2” 150RF
XLC S 144 1300 - 8 12 DN 40 2” 150RF
XLC S 165 1540 - 6 12 DN 40 2” 150RF

< XLC AISI 316L basic version with: OVERALL DIMENSIONS M ATERIALS OF CONSTRUCTION
double diaphragm with local visual
rupture detector and flanged con-
nections. PARTS A P S

LIQUID END AISI 316L PVC PVDF

DIAPHRAGM PTFE PTFE PTFE

VALVE SEAT AISI 316L PVC PVDF

VALVE GUIDE AISI 316L PP PVDF

VALVE AISI 316L PIREX PIREX

VALVE HOUSING AISI 316L PVC PVDF

VALVE SEAL FPM FPM FPM

FLANGE AISI 316L PVC PVDF

MODEL NUMBER
KEY TO SYMBOL
PUMP TYPE
A AISI 316L EXECUTION
P PVC EXECUTION
11
S PVDF EXECUTION
Z 4÷20 mA OBL ELECTRIC ACTUATOR
XLC A 123 S. . . FA Z W 0,2-1 BAR PNEUMATIC ACTUATOR
... UNI/DIN FLANGED CONNECTIONS
FA ANSI FLANGED CONNECTIONS
MEMBRANE RUPTURE DETECTOR
N° STROKES PER MINUTE
 > > Studio_SCAFIDI_ComunicAzioni_Visive
Worldwide

Technical data are subject to modifications without prior notice.

America Middle East Asia

IDEX Latin America Commercial Operations IDEX MECO / IDEX MIDDLE EAST IDEX Asia Commercial Operations
IDEX Mexico de S.A. de C.V, DUBAI AIRPORT FREE ZONE IDEX Asia Pacific Pte Ltd
a unit of IDEX Corporation PO BOX 293825 18 Boon Lay Way #09-97/98
Mario Pani 400, Piso 1, Oficina 111 DUBAI Tradehub 21
Col. Lomas de Santa Fe, UNITED ARAB EMIRATES (UAE) Singapore 609966
Cuajimalpa de Morelos Phone:+ 97142257978 Tel: +65 66847304
C.P 05300, México, D.F. Fax: + 97142259796 Email : [email protected]
Tel: +52-55-4738-4124 Email : [email protected]
Email: [email protected] IDEX Asia Commercial Operations
India IDEX Trading (Shanghai) Co., LTD
Address: Rm3502-3505,
IDEX India Commercial Operations Zhaofeng Plaza, No. 1027
S-14, First floor Changning Road, Shanghai 200050, P.R.C.
Solitaire Corporate Park, Tel: +86-21-5241 5599
167, Guru HargovindjiMarg, Chakala, Email : [email protected]
Andheri (East), Mumbai 400 093
Tel: +91-22 6643-5555
Email: [email protected]

OBL s.r.l.
20090 Segrate - MILANO
Via Kennedy, 12
Tel. +39-02.269191
Fax +39-02.2133893
www.oblpumps.it
[email protected]

FLUID & METERING