Senographe Essential

AWS Application Software

ADS version 55.40 June 2014
DVD-ROM Part Number: 5261380-9 rev. 1
System software version for Senographe Essential is 54.20
Senographe Essential 的系统软件版本号是 54.20
Including "AWS S/W Installation Guide" Booklet 5426228-4-1EN rev. 1

© 2010-2014 by General Electric Company

All Rights Reserved
 Senographe Essential AWS S/W Installation Guide
Note:
System software version displayed in the Browser for Senographe Es-
sential is not ADS software version.
From Vitality system version, the one displayed in the Browser will be:
• "Senographe Essential 54.20" for Core system
• "Senographe Essential 54.20 / CESM 1" for system with CESM
option activated

1. PREPARE INSTALLATION - PERIPHERAL FEATURING

CAUTION
If you install the ADS Software from another ADS version, a full instal-
lation from scratch is required.
A complete AWS software installation (from scratch) takes about 90
minutes.
A version update (installation from warm) takes between 40 and 90
minutes.
Before installing software, please check out the peripheral featuring delivered
with your system according to references listed below, and set the correct
peripheral on OS and software installing.
• Monitors
- 18" LCD monitor FRU: 2403952-4, original reference: 2403951-4
- 19" LCD monitor, original reference: 5148720-4
- 21" LCD monitor, original reference: 5350390

5426228-4-1EN rev. 1 Page 2

 Senographe Essential AWS S/W Installation Guide
• Keyboards

FRU For HP Z400 For Kontron R2

US (default) 5394524 5535634
German 5394524-2 5394524-2
Swedish 5394524-3 5394524-3
Finnish 5394524-3 5394524-3
Norwegian 5394524-4 5394524-4
Spanish 5394524-5 5394524-5
French 5394524-6 5394524-6
Portuguese 5394524-7 5394524-7
Italian 5394524-8 5394524-8
Danish 5394524-9 5394524-9
Dutch 5394524-10 5394524-10

Table 1:

5426228-4-1EN rev. 1 Page 3

 Senographe Essential AWS S/W Installation Guide

2. INSTALL FROM SCRATCH

CAUTION
Installing from scratch will erase all data. Before starting, make sure all
images have been safely backed-up or archived.
Note down the ADS parameters as indicated in chapter System Identi-
fication and Follow-up of the Service Information and Procedures man-
ual
Note:
Material needed:
• AWS Operating System DVD-ROM,
• AWS Application DVD-ROM,
• Current IDC software CD-ROM
2-1. Operating System Installation
There are two possibilities:
1. If system is on:
• Load Solaris DVD-ROM into the ADS DVD drive.
• Shut down system
• Once system is OFF
• Switch cart power ON
2. If system is off:
• Switch cart power ON
• Insert quickly Solaris DVD-ROM into the ADS DVD drive
A first screen with "Jumpstart Installation" should appear.
If the "jumpstart installation" message is not displayed on the first screen,
5426228-4-1EN rev. 1 Page 4
 Senographe Essential AWS S/W Installation Guide
wait for the login or grub prompt. Then, redo the procedure from step 3.
If the installation still does not start, follow the troubleshooting procedure in
section 5, Troubleshooting.
3. Press <Enter> to start installation.
Solaris installation starts.
2-2. Keyboard layout configuration
1. Use the arrow keys to move the cursor and the spacebar to select an item.
2. Select the installed keyboard conforming with the P/N list on page 2, then
press F2.
3. To select English language, type "0" and then press <Enter>.
! Notice:
Do not select anything else but US English. This is the Operating Sys-
tem installation language, not the application language.
Note:
In order to be able to type, the mouse must be inside the window.
4. To begin the installation process, click Next in the window.
2-3. Network parameters configuration
1. Select Networked for network connection (even if the system is not con-
nected to a network). Click Next.
2. Select e1000g0 as the primary network interface.
3. Select No for DHCP. Click Next.

5426228-4-1EN rev. 1 Page 5

 Senographe Essential AWS S/W Installation Guide
4. Enter system Hostname (as given by your network administrator). Click
Next.
Note:
Make sure the hostname length you enter is shorter than 12 charac-
ters. Using hostnames longer than 12 characters will cause DICOM
connectivity problems. Contact your network administrator if needed.
5. Enter AWS primary IP address (as given by your network administrator).
Click Next.
6. Enter your Netmask value (do not guess, ask your network administrator)
and click Next.
7. Select No for Enable Ipv6. Click Next.
8. Select none as the default route for e1000g0. Click Next.
9. Select No for Kerebos Security. Click Next.
10. Select None for the Name Service and click Next.
11. Select Use the NFSv4 domain derived by the system. Click Next.
2-4. Date and time configuration
1. Select Offset from GMT to set date and time zone. Click on Next.
2. Set a 0-hour GMT offset and click Next.
3. Change dates and time if required and click Next.
4. Enter the root password twice and click Next.
5. Deselect the option "I would like to register using My Oracle Support Infor-
mation". Click Next.
6. Click Next without filling in the fields.
7. Check the accuracy of the information, then click Confirm.

5426228-4-1EN rev. 1 Page 6

 Senographe Essential AWS S/W Installation Guide
2-5. OS installation finalization
Note:
No action is required at this point of the installation
1. Wait for the following messages to appear:
Starting Solaris installation program
Searching for JumpStart directory
rules.ok found on CDROM
Using Profile: profile
Installing 64 bit Solaris packages
Verifying disk Configuration
Verifying space allocation
.......
Remove the DVD and press <Enter> to reboot the system
The installation is complete.
2. Remove the ADS DVD-ROM from the DVD-ROM drive of the ADS Com-
puter, then press <Enter>.
The system reboots.
3. After the complete reboot of the system, wait until the following message
appears and invites you to continue:
*************************************************
* OS installation of ADS performed successfully *
* now log as root and type *
* /install_ads_appli *
*************************************************

2-6. Application Software Installation

1. Follow the instruction as displayed in the previous message:
• Log in as root, then enter the corresponding password.
• Type
{Hostname}/install_ads_appli↵
Hit <Enter> ↵ to install from CD-ROM,
or type “net” to install from network:
2. Press <Enter> for installation from the DVD.
5426228-4-1EN rev. 1 Page 7
 Senographe Essential AWS S/W Installation Guide
Insert ADS Application CD in drive.
Hit <Enter> ↵ when CD inserted or q to quit
3. Insert the ADS Application Software DVD into the DVD drive of the ADS
Computer, then press <Enter>.
The installation starts automatically. When the installation is completed, do
not follow the on screen instructions for removing the cdrom or floppy from
the station. Press <Enter>. The system reboots twice. Do not login as sdc
after the first reboot. It takes about one minute for the second reboot to
start. After the second reboot is completed, you can remove the DVD from
the optical device.
4. Log in as sdc. In the displayed window, enter:
User: clinical↵
(and corresponding password clinical)↵

2-7. Monitor resolution configuration

1. From behind the Browser, right click on the background, and from the
Root menu, select Service Tools > Command window.
A Command window appears with an ADS prompt.
2. Change to the ~sdc/senovision/scripts directory, by entering:
cd ~sdc/senovision/scripts
3. Specify the monitor resolution and pitch, by entering:
SetMonitorConfig.sh RESOLUTION PITCH
where the RESOLUTION and PITCH vary according to the list provided in
Table 2 below.

5426228-4-1EN rev. 1 Page 8

 Senographe Essential AWS S/W Installation Guide
For example, if you have the 18” monitor (2403951-4), enter:
SetMonitorConfig.sh 1MP 90

Model Size (inch) Resolution Pitch (dpi) Part Number

EIZO 18 1MP 90 2403951-4

EIZO 19 1MP 86 5148720-4

EIZO 21 3MP 120 5350390

Table 2:
4. The systems asks for the root password twice, enter it.
5. Reboot the system, by entering:
reboot
Note:
The system does not reboot automatically.
The ADS software is now installed. The CD tools and IDC files now
need to be updated on the AWS.
2-8. Post-installation steps
1. On the AWS screen background, right click to open the Root Menu. Select
Service Tools, then Command Window.
2. In the window, type:
su - root↵
and then enter root password
Then type:
{Hostname} cd ~sdc/install↵
{Hostname} install.cdr↵
Remove CDROM if asked by the script, then press "Return"
3. On the AWS background screen, right click to open the Root Menu. Select
Restart Browser.
5426228-4-1EN rev. 1 Page 9
 Senographe Essential AWS S/W Installation Guide
4. If the command window has been closed, right click to open the Root
Menu. Select Service Tools, then Command Window.
5. Login as root by typing:
su - root↵
and then enter root password.
6. At the prompt, type:
{Hostname} cd ~sdc/senovision/scripts↵
{Hostname} Update_IDC_Files↵
7. Follow instructions: Load IDC application CD-ROM on AWS DVD drive.
When End of script is displayed and CD-ROM automatically ejected,
files are updated.
If an error message appears, the loading has failed.
8. Do not forget to connect the bar code reader if necessary and perform its
installation according to the SIP.
9. Reboot the system.
10. Verify Installation as described in section 4, Verify Installation.

3. UPDATE FROM CD-ROM

Note:
Only the AWS Application DVD-ROM and the current IDC Software
CD-ROM are needed.
A version update without OS installation can only be performed when
the ADS SW version is the same as the previously installed.

CAUTION
First note down the ADS parameters as indicated in chapter System
Identification and Follow-up of the Service Information and Procedures
manual.
5426228-4-1EN rev. 1 Page 10
 Senographe Essential AWS S/W Installation Guide
1. Shut down and reboot the AWS workstation.
2. At the login prompt log in as root.
3. Load the AWS Application DVD-ROM into the drive, then enter:
{Hostname} cd /cdrom/cdrom0/jumpstart↵
{Hostname} update.ads↵
4. The Console and AWS Installation windows are displayed:
Note:
AWS installation will take between 40 and 90 minutes.
Date : starting AWS installation [UPDATE] for [Ffdm]
----------------------------------------------------
- Hit <Enter> to install from cdrom or type “net” to install from the
network:
5. Press <Enter>
- Press <Enter> when CD inserted or [q/Q] to quit
6. Press <Enter>
7. Wait about one minute; messages indicating the following actions are dis-
played.
Verify CD...ADS application CD found
Installation directory is /cdrom/adsXX.XX
Software will be updated
ads packages de-installation
ads packages installation
Verify that all operations are "successful”.
Note:
GEMSiop package installation can take about an hour, according to the
number of images
Note:
If some packages installation are not “successful”, wait until the end of
the update and start again at the beginning of section 3, Update from
CD-ROM.
Clean ADS installation files.
5426228-4-1EN rev. 1 Page 11
 Senographe Essential AWS S/W Installation Guide
“Workstation will reboot in 1 minute. Please wait”
After ADS installation, the system reboots automatically:
8. Log in as sdc.
9. In the displayed window, enter:
User: clinical↵
(and corresponding password clinical)↵
10. From behind the Browser, right click on the background, and from the
Root menu, select Service Tools > Command window.
A Command window appears with an ADS prompt.
11. Change to the ~sdc/senovision/scripts directory, by entering:
cd ~sdc/senovision/scripts
12. Specify the monitor resolution and pitch, by entering:
SetMonitorConfig.sh RESOLUTION PITCH
where the RESOLUTION and PITCH vary according to the list provided in
Table 3 below.
For example, if you have the 18” monitor (2403951-4), enter:
SetMonitorConfig.sh 1MP 90

Model Size (inch) Resolution Pitch (dpi) Part Number

EIZO 18 1MP 90 2403951-4

EIZO 19 1MP 86 5148720-4

EIZO 21 3MP 120 5350390

Table 3:
13. The systems asks for the root password twice, enter it.
14. Reboot the system, by entering:
reboot

5426228-4-1EN rev. 1 Page 12

 Senographe Essential AWS S/W Installation Guide
The ADS software is now installed. The CD tools and IDC files now
need to be updated on the AWS.
15. On the AWS screen background, right click to open the Root Menu. Select
Service Tools, then Command Window.
16. In the window, type:
su - root↵
and then enter root password
{Hostname} cd ~sdc/install↵
{Hostname} install.cdr↵
Remove CDROM if asked by the script, then press "Return"
17. Restart Browser.
After restarting the browser, the CDR read/write icon appears in the
Browser.
18. If the command window has been closed, open a new command window
and login as root:
type:
su - root↵
and then enter root password.
19. At the prompt, type:
{Hostname} cd ~sdc/senovision/scripts ↵
{Hostname} Update_IDC_Files ↵
20. Follow instructions: Load IDC application CD-ROM on the ADS DVD drive.
When End of script is displayed and CD-ROM automatically ejected,
files are updated.
If an error message appears, the loading has failed.
21. Do not forget to connect the bar code reader if necessary.
22. Reboot the system.
23. Verify Installation as described in section 4, Verify Installation.

5426228-4-1EN rev. 1 Page 13

 Senographe Essential AWS S/W Installation Guide
Note:
When starting the application, if the number of the release is not dis-
played on the browser and buttons have text instead of icon, the update
procedure must be done again from beginning of section 3, Update
from CD-ROM.

4. VERIFY INSTALLATION
In order to check proper installation or update, you shall launch the AWS
dr_ads utility, by following the steps below:
1. Reboot the system.
2. Login as sdc
User: clinical↵
(and corresponding password clinical)↵
3. On the AWS background screen, right click to open the Root Menu. Select
Service Tools, then Command Window.
4. From this window, login as root:
su - root↵
(and corresponding password when asked) ↵
5. Move to the dr ADS directory:
cd /export/home/install/jumpstart/DoctorAds↵
6. Start dr_ads, launching all tests in a row:
./dr_ads ↵
dr_ads main menu is displayed.
--------------------- Doctor ADS Tests -------------------------
0 - Perform all tests [1-17] 10 - Check IPC setting
1 - Perform visual check 11 - Check run level
2 - Check RAM size 12 - Check software key
3 - Check PCI boards 13 - Check hostname
4 - Check cdrom 14 - Check network
5 - Check disks 15 - Check users accounts
6 - Check ttys 16 - Check vital files
7 - Check packages/revisions 17 - Check optional CD-R drive
5426228-4-1EN rev. 1 Page 14
 Senographe Essential AWS S/W Installation Guide
8 - Check partitions 18 - Perform Software tests
9 - Check patches 19 - Perform hardware tests
------------------------- Reports ------------------------------
80 - Display ADS configuration 83 - Display latest report
81 - Display customer data sheet
82 - Display latest errors
--------------------------- Tools ------------------------------
98 - Reset devices path.
99 - Reboot ADS
----------------------------------------------------------------
e - Exit
Your choice :
7. Select 0 - Perform all tests [1-17] to launch all tests. Press [RETURN] to
the first two questions.
Check Security Label is fixed as specified............................[ OK ]
Check HLB Label is fixed as specified.................................[ OK ]
Checking RAM size.....................................................[ OK ]
Checking Ethernet board...............................................[ OK ]
Checking Serial board.................................................[ OK ]
Checking Graphic board................................................[ OK ]
Checking Resolution...................................................[ OK ]
Checking CDROM drive..................................................[ OK ]
Checking disk.........................................................[ OK ]
Compare disk size.....................................................[ OK ]
Compare disk model....................................................[ OK ]
Checking serial ports settings........................................[ OK ]
Checking S/W Package installation.....................................[ OK ]
Checking disks partitions.............................................[ OK ]
Patches are no longer required for Sun U20............................[ OK ]
Checking IPC settings.................................................[ OK ]
Checking ADS run level................................................[ OK ]
Checking ADS mandatory S/W key........................................[ OK ]
Validating hostname settings..........................................[ OK ]
Checking /etc/hosts...................................................[ OK ]
Pinging remote nodes..................................................[ OK ]
Checking network interfaces...........................................[ OK ]
Checking users account................................................[ OK ]
Checking existence/permissions of ADS directories.....................[ OK ]
Checking existence/permissions of ADS executable files................[ OK ]
Checking existence/permissions of ADS script files....................[ OK ]
Checking existence/permissions of ADS configuration files.............[ OK ]
Checking existence/permissions of ADS Uptine/IQ files.................[ OK ]
Checking existence/permissions of ADS locale-specific files...........[ OK ]
Checking permissions of the /dev/null device..........................[ OK ]
Checking /export/home/sdc/.SdCrc sanity...............................[ OK ]
Checking $DISPLAY environment variable................................[ OK ]
Checking CD-R drive model.............................................[ OK ]
Checking CD-R Partition...............................................[ OK ]
5426228-4-1EN rev. 1 Page 15
 Senographe Essential AWS S/W Installation Guide
---------------------------------------------------------------------
Dr ADS Results 11/04/2006 12:30:07: 0 ERROR(s) XX WARNING(s)
8. No errors should be listed. Warnings are acceptable.
Error and warning summaries are displayed by selecting option 82 -
Display latest errors from dr_ads main menu.
Note:

a. If the following error is listed:

Checking existence/permissions of ADS script files..................[ ERROR ]
then check in error and warning summaries that the corresponding
error is the following:
ERROR : /export/home/sdc/senovision/scripts/br/idc/. does not exist.
If so, redo steps 1 to 3 of section 2-8, Post-installation steps or
steps 15 to 17 of section 3, Update from CD-ROM.
b. If the following error is listed:
Checking Resolution.................................................[ ERROR ]
then check in error and warning summaries that the corresponding
error is the following:
ERROR : It appears the NVIDIA graphic board resolution is not set to 1280 x
1024.
If so, re-install the OS and ADS software as described in section 2,
Install FROM SCRATCH.
c. If the following error is listed:
ERROR : Your external network interface e1000g currently runs at 100Mbps.
then the issue can come from the external network or from the Kon-
tron R2 network card.
You need to confirm that the Kontron R2 network card works properly.
With an ethernet cable, connect the two ADS' ethernet ports together.
Then, on the screen background, right click to open the Root menu.
Select Service Tool, then Command window.
In the window, type:
5426228-4-1EN rev. 1 Page 16
 Senographe Essential AWS S/W Installation Guide
su - root↵
and then enter root password.
Type the command:
dladm show-dev
If the Kontron R2 network card works properly, it should be displayed:
e1000g0 link: up speed: 1000 Mbps duplex: full
e1000g1 link: up speed: 1000 Mbps duplex: full
This means that the issue comes from the hospital network. See with
the hospital network's representative to manage it.
Else, the issue can come from both Kontron R2 network card or/and
the external network of the hospital.
9. Press the <CR> key to have access to the Dr ADS menu. Then, press <e>
to exit.
10. After an installation from scratch. In the browser, check the Demo Patient
images are listed:
• If they are present (patient list is not empty), the check is complete.
• ONLY if they are NOT present (patient list is empty), follow steps 11
to 16. Wait for ALL Demo Patient images to be listed (8 Demo Patient
images with 6 processing eContrast1 to eContrast6) before proceed-
ing with the next step.
11. On the AWS screen background, right click to open the Root Menu. Select
Service Tools, then Command Window.
12. In the window, type the following command (as sdc):
kill.sdc ↵
The browser is not displayed any more.
13. Insert the AWS Application Software DVD in ADS DVD drive.
14. Create a new directory by entering:
mkdir demoexams ↵
cd demoexams ↵
15. Mount the DVD and check it is correctly mounted:
cdromMount ↵
5426228-4-1EN rev. 1 Page 17
 Senographe Essential AWS S/W Installation Guide
ls /cdrom/cdrom0 ↵
list of GEMSxxxx packages is displayed
16. Since your system is a Senographe Essential, type the following com-
mand:
cp /cdrom/cdrom0/DemoExams/ESS/*Z . ↵
17. Restart the Browser, the Demo Patient images should appear after less
than 5 minutes. Wait for ALL Demo Patient images to be listed (8 Demo
Patient images with 6 processing eContrast1 to eContrast6) before pro-
ceeding with the next step.
18. If the Stereotaxy positioner is installed, perform the image plane to carbon
cover distance calibration as described in Job Card JC-CAL-A002 of the
Stereotaxy Service Manual.

5426228-4-1EN rev. 1 Page 18

 Senographe Essential AWS S/W Installation Guide

5. TROUBLESHOOTING
Note:
When executing the troubleshooting procedure, do not modify anything
else but what is described in this procedure.
Make sure "NUMLOCK" is not enabled on the keyboard.
1. Shutdown and reboot the system.
2. Press Delete to enter the BIOS.
3. Press F3 (Defaults optimized), then press Yes.
4. Press F4 (Save and Exit), then press Yes.

5426228-4-1EN rev. 1 Page 19

 Senographe Essential AWS S/W Installation Guide
Revision History

Date Reference Revision Main modifications

July 2014 5426228-4-1EN 1 Update to ADS 55.40

Resolved SPR: HCSDM00255487

July 2013 5426228-3-1EN 1 Update to ADS 55.30, incl. SPR

HCSDM00196200

January 2012 5391279-2-1EN 1 Update to ADS 55.20

August 2010 5391279-1-1EN 1 Update to Gemini

May 2010 5180412-12-1EN 1 Update to LFOV2

5426228-4-1EN rev. 1 Page 20