Scribd
Upload
149 views1 page

CMGPS 588 Technical Data ENU

The CMGPS 588 is an antenna-integrated GPS synchronization unit optimized for outdoor use. It functions as a PTP Grandmaster Clock and is ready for operation within a short time after connecting to power via PoE. It can synchronize output signals to GPS atomic clocks for distributed synchronized testing up to 95 meters away using extension cables. Compatible devices include various CMC test sets. Applications include synchronizing distributed tests and UTC/TAI recordings.

Uploaded by

Anonymous s8riflD
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
149 views1 page

CMGPS 588 Technical Data ENU

The CMGPS 588 is an antenna-integrated GPS synchronization unit optimized for outdoor use. It functions as a PTP Grandmaster Clock and is ready for operation within a short time after connecting to power via PoE. It can synchronize output signals to GPS atomic clocks for distributed synchronized testing up to 95 meters away using extension cables. Compatible devices include various CMC test sets. Applications include synchronizing distributed tests and UTC/TAI recordings.

Uploaded by

Anonymous s8riflD
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
You are on page 1/ 1

CMGPS 588

CMGPS 588 Synchronization Unit

The CMGPS 588 synchronization unit is an antenna-integrated GPS controlled time reference


optimized for outdoor usage. It works as a Precision Time Protocol (PTP) Grandmaster Clock and
does not require any configuration work. It is automatically ready for operation within a very
short time after providing power supply via Power over Ethernet (PoE). The distance between
the CMGPS 588 and the CMC can be extended up to 95 m (312 ft) by using extension cables.

Compatible test sets


>> CMC 356, CMC 353, CMC 850, CMC 256plus and CMC 256-6 with NET-1B, NET-1C or NET-2
and Test Universe 3.0 or later
>> DANEO 400

Applications
>> Synchronizing output signals to the atomic clocks of the GPS system for distributed
synchronized tests
>> Starting distributed tests synchronously at a configurable time (for example, for performing
end-to-end tests of line protection schemes)
>> UTC or TAI synchronized recordings

Specifications
GPS data
Timing accuracy ±100 ns to reference time (TAI/UTC)
Supported timing protocols PTP Power Profile
GPS performance 12 channel GPS receiver, Frequency: 1575.42 MHz, L1 band
Power supply
Power supply Power over Ethernet (PoE), class 1 powered device according to IEEE 802.3af
Power consumption < 2 W
Environmental conditions
Operating temperature -40 °C ... +70 °C (-40 °F ... +158 °F)
Storage temperature -40 °C ... +85 °C (-40 °F ... +185 °F)
Degree of protection Robust and waterproof, IP67 according to IEC 60529
Vibration IEC 60068-2-6, Test Fc, sinusoidal vibration, 6 mm at 5 – 9 Hz, 2 g at 9 – 200 Hz
Shock IEC 60068-2-27, Test Ea, 15 g/11 ms half sine
Safety standards, electromagnetic compatibility
EMC The product adheres to the electromagnetic compatibility (EMC) Directive 2004/108/EC
(CE conform).
Emission EN 55022:2010 class B, EN 61326-1:2006
Immunity EN 55024:2010, EN 61326-1:2006, EN 62305-4:2010
Safety IEC 60950-1:2005 2 Ed. +A1:2009, IEC 60950-22:2005
General
Weight 500 g (1.1 lbs)
Dimensions Height (without connector and tripod): 106 mm (4.2 in)
Diameter: 116 mm (4.6 in)
Ethernet port Waterproof Ethernet connector according to IEC 61076-3-106 (variant 4),
10Base-T/100 Base-TX
Certifications TÜV
Delivery contents
CMGPS 588 synchronization unit with integrated antenna and timing receiver, hardtop case, 15 m (49 ft) rugged
ethernet cable with waterproof connector, tripod

Ordering Information
Order number Delivery contents
VEHZ3004 CMGPS 588 Synchronization Unit
VEHK0303 40 m (131 ft) rugged ethernet cable reel as extension (2 extensions possible)

You might also like