Scribd
Upload
2K views1 page

General Tolerances - DIN - IsO - 2768

This document provides specifications for external thread dimensions for cap screws and bolts in accordance with ASME B1.1 standard. It lists the nominal size, designation, major diameter range, pitch diameter range, and tolerance for various screw sizes ranging from 4-40 to 3 inches. The major and pitch diameters are given in both maximum and minimum values to define the acceptable thread size ranges.

Uploaded by

Luis Eduardo García Maltos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

General Tolerances - DIN - IsO - 2768

This document provides specifications for external thread dimensions for cap screws and bolts in accordance with ASME B1.1 standard. It lists the nominal size, designation, major diameter range, pitch diameter range, and tolerance for various screw sizes ranging from 4-40 to 3 inches. The major and pitch diameters are given in both maximum and minimum values to define the acceptable thread size ranges.

Uploaded by

Luis Eduardo García Maltos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Cap Screws & Bolts External Thread Dimensions

E XTERNAL T HREADS - CLASS 2A ASME B1.1

Series Major Diameter Pitch Diameter


Nominal Size Allowance
Designation Max Min Max Min Tolerance

4-40 UNC 0.0008 0.1112 0.1061 0.0950 0.0925 0.0025

6-32 UNC 0.0008 0.1372 0.1312 0.1169 0.1141 0.0028

8-32 UNC 0.0009 0.1631 0.1571 0.1428 0.1399 0.0029

10-24 UNC 0.0010 0.1890 0.1818 0.1619 0.1586 0.0033

10-32 UNF 0.0009 0.1891 0.1831 0.1688 0.1658 0.0030

1/4-20 UNC 0.0011 0.2489 0.2408 0.2164 0.2127 0.0037

1/4-28 UNF 0.0010 0.2490 0.2425 0.2258 0.2225 0.0033

5/16-18 UNC 0.0012 0.3113 0.3026 0.2752 0.2712 0.0040

5/16-24 UNF 0.0011 0.3114 0.3042 0.2843 0.2806 0.0037

3/8-16 UNC 0.0013 0.3737 0.3643 0.3331 0.3287 0.0044

3/8-24 UNF 0.0011 0.3739 0.3667 0.3468 0.3430 0.0038

7/16-14 UNC 0.0014 0.4361 0.4258 0.3897 0.3850 0.0047

7/16-20 UNF 0.0013 0.4362 0.4281 0.4037 0.3995 0.0042

1/2-13 UNC 0.0015 0.4985 0.4876 0.4485 0.4435 0.0050

1/2-20 UNF 0.0013 0.4987 0.4906 0.4662 0.4619 0.0043

9/16-12 UNC 0.0016 0.5609 0.5495 0.5068 0.5016 0.0052

9/16-18 UNF 0.0014 0.5611 0.5524 0.5250 0.5205 0.0045

5/8-11 UNC 0.0016 0.6234 0.6113 0.5644 0.5589 0.0055

5/8-18 UNF 0.0014 0.6236 0.6149 0.5875 0.5828 0.0047

3/4-10 UNC 0.0018 0.7482 0.7353 0.6832 0.6773 0.0059

3/4-16 UNF 0.0015 0.7485 0.7391 0.7079 0.7029 0.0050

7/8-9 UNC 0.0019 0.8731 0.8592 0.8009 0.7946 0.0063

7/8-14 UNF 0.0016 0.8734 0.8631 0.8270 0.8216 0.0054

1-8 UNC 0.0020 0.9980 0.9830 0.9168 0.9100 0.0068

1-14 UNS 0.0017 0.9983 0.9880 0.9519 0.9463 0.0056

1 1/8-7 UNC 0.0022 1.1228 1.1064 1.0300 1.0228 0.0072

1 1/8-12 UNF 0.0018 1.1232 1.1118 1.0691 1.0631 0.0060

1 1/4-7 UNC 0.0022 1.2478 1.2314 1.1550 1.1476 0.0074

1 1/4-12 UNF 0.0018 1.2482 1.2368 1.1941 1.1879 0.0062

1 3/8-6 UNC 0.0024 1.3726 1.3544 1.2643 1.2563 0.0080

1 1/2-6 UNC 0.0024 1.4976 1.4794 1.3893 1.3812 0.0081

1 3/4-5 UNC 0.0027 1.7473 1.7268 1.6174 1.6085 0.0089

2-4.5 UNC 0.0029 1.9971 1.9751 1.8528 1.8433 0.0095

2 1/2-4 UNC 0.0031 2.4969 2.4731 2.3345 2.3241 0.0104

2 3/4-4 UNC 0.0032 2.7468 2.7230 2.5844 2.5739 0.0105

3-4 UNC 0.0032 2.9968 2.9730 2.8344 2.8237 0.0107

58 This page prints with a watermark

You might also like