Scribd
Upload
134 views2 pages

Project Title: Exercise 1

1. The document describes the structural analysis of a beam-column element with design element 1 connecting nodes 1 and 2 over a length of 8 meters. 2. The analysis calculates bending moments, shears, axial force, and torsion on the member based on the material properties of S355 steel and cross-sectional properties of a UB610X305X149 I-beam. 3. The results indicate the member satisfies all relevant capacity checks against buckling and strength limits according to the HKSC 2011 design code.

Uploaded by

tfvnjy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
134 views2 pages

Project Title: Exercise 1

1. The document describes the structural analysis of a beam-column element with design element 1 connecting nodes 1 and 2 over a length of 8 meters. 2. The analysis calculates bending moments, shears, axial force, and torsion on the member based on the material properties of S355 steel and cross-sectional properties of a UB610X305X149 I-beam. 3. The results indicate the member satisfies all relevant capacity checks against buckling and strength limits according to the HKSC 2011 design code.

Uploaded by

tfvnjy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Project Title: Exercise 1

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[DESIGN ELEM.]= 1; [NODE1]= 1, [NODE2]= 2; [LENGTH]= 8.0000
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

<ANALYSIS CASE> : [SLS]LL <UNIT> : kN,m

[My1]= 0.0000E+00 [Mz1]= 0.0000E+00; [My2]= 0.0000E+00 [Mz2]= 0.0000E+00


[Vy1]= 0.1200E+03 [Vz1]= 0.0000E+00; [Vy2]=-0.1200E+03 [Vz2]= 0.0000E+00
[P ]= 0.0000E+00 (Tension); [Mt ]= 0.0000E+00 (Torsion)
Design Moments: [Myd]= 0.0000E+00 [Mzd]= 0.2400E+03 [ at]= 0.5000E+00
Design Type : "Beam-Column" Design Code : "HKSC[2011]"

<MATERIAL PROPERTIES> : S355

Elasticity Modulus, [E]= 0.2060E+09; Yield Strength, [py]= 0.3550E+06


Design Strength: [py1]= 0.3450E+06(Bending), [py2]= 0.3450E+06(Axial)

<SECTION PROPERTIES> : UB610X305X149

B = 0.3048E+00 D = 0.6124E+00 Tf = 0.1970E-01 tw = 0.1180E-01


-----------------------------------------------------------------------
Area = 0.1900E-01 Iz = 0.1259E-02 Iy = 0.9308E-04 J = 0.2000E-05
Zz(+)= 0.4112E-02 Zy(+)= 0.6108E-03 Zz(-)= 0.4112E-02 Zy(-)= 0.6108E-03
Sz = 0.4594E-02 Sy = 0.7330E-03 rz = 0.2574E+00 ry = 0.6999E-01
Avz = 0.1201E-01 Avy = 0.7226E-02 Tcz = 0.1015E-03 Tcy = 0.1695E-03
Note: The plastic moduli are limited to Sy = 1.20 Zy, Sz = 1.20 Zz.

<SECTION CLASSIFICATION> : Rolled; I/H-Section

Mat. Coeff.[e]= 0.8928 [ =SQRT(275/py) ]


Web : [d/t]= 48.5593 <= 80e/(1+r1) = 71.4244
Flange : [b/T]= 7.7360 <= 9e = 8.0352
Section Class = [ 1 ] "Plastic"
Strength Reduction Factor for Slender Section = 1.0000
NOTE: PLASTIC MODULUS IS USED IN DESIGN.

<WEB SHEAR BUCKLING & SHEAR RESISTANCE>

Web : [d/t]= 48.5593 <= 70e = 62.4964 O.K.


This member is NOT susceptible to shear buckling.

Shear Strength : [pv] = SQRT(1/3)*py1 = 0.1992E+06


Shear Buckling : [qw] = 0.1992E+06
Stress : Shear Vy|z Shear(Torsion) Total Stress 0.6*MIN(pv,qw)
-------------------------------------------------------------------
Along y: 0.1661E+05 0.0000E+00 0.1661E+05 0.1195E+06 (LOW SHEAR)
Along z: 0.0000E+00 0.0000E+00 0.0000E+00 0.1195E+06 (LOW SHEAR)

Reduction Factor Due to High Shear : p(Vy) p(Vz)


0.0000 0.0000

<BEAM BUCKLING PARAMETERS>

Beam Buckling Length Factor, Le(b)/L = 1.2000


u = 0.8861 ; v = 0.8540 ; x = 32.6974 ; Bw = 1.0000
Lamda-Beam (Le/ry) = 137.1576 ; Lamda-LT =103.7932
Perry Factor (PERRY-ROBERTSON FORMULA), nLT = 0.5116
Beam Equivalent Uniform Moment Factor, mLT = 0.9250
Col. Eqv. Uniform Moment Factor(Minor-Axis),m = 1.0000
Loading Condition : Normal Load
Beam Buckling Reduction Factor (y,z) = 1.000 0.377
Beam Buckling Strength&Resistance,pb = 0.1302E+06 ; Mb = 0.5981E+03

<COLUMN BUCKLING PARAMETERS>

Column Buckling Curve: Curve(y) = "b " ; Curve(z) = "a "


Column Effective Length Factor, Le(y,z)/L = 1.000 1.000
Column Slenderness Ratio, Le(y,z)/r = 114.298 31.078
Equivalent Uniform Moment Factor,m(y,z) = 1.000 1.000
My Amp. Factor = 1/[1-Fc.Ley^2/(Pi^2EIy)] = 1.000
Mz Amp. Factor = 1/[1-Fc.Lez^2/(Pi^2EIz)] = 1.000
Column Buckling Reduction Factor (y,z) = 1.000 1.000
Tensile Strength & Resistance, pt = 0.3450E+06 ; Pt = 0.6555E+04
Project Title: Exercise 1

<SECTION CAPACITY & BUCKLING RESISTANCE CHECK>


( First-Order Linear Design : Indirect Analysis )

[EQ(8.78)]: Fc/(Ag.py)+Mz/Mcz+My/Mcy =
0.00( 0.0%) "+" -0.15( 100.0%) "+" 0.00( 0.0%) = 0.151 <=1 O.K.

[EQ(8.79)]: Fc/Pc+(mz.Mz)/Mcz+(my.My)/Mcy =
0.00( 0.0%) "+" -0.15( 100.0%) "+" 0.00( 0.0%) = 0.151 <=1 O.K.

[EQ(8.80)]: Fc/Pc`+(mz.Mz`)/Mcz+(my.My`)/Mcy=
0.00( 0.0%) "+" -0.15( 100.0%) "+" 0.00( 0.0%) = 0.151 <=1 O.K.

[EQ(8.81)]: Fc/Pcy+(mLT.MLT)/Mb+(my.My)/Mcy =
0.00( 0.0%) "+" -0.37( 100.0%) "+" 0.00( 0.0%) = 0.371 <=1 O.K.

[ SHEAR ]: Vy/Vcy = 0.083 ; Vz/Vcz = 0.000

[ Torsion]: Mt/Mtc = 0.000

<DEFLECTION CHECK>

(1) Relative deflection between two ends: [P-D]


DX = 0.0000E+00 DX/L = << 0
DY = 0.0000E+00 DY/L = << 0
DZ = 0.0000E+00 DZ/L = << 0
DR = 0.0000E+00 DR/L = << 0
NOTE: DR=SQRT(DX^2 + DY^2 + DZ^2)

(2) Local deflection along member: [P-d]


dy = -.6169E-02 dy/L = 1/ 1296 [ at ] = 0.5000
dz = 0.0000E+00 dz/L = << 0

You might also like