Plywood Material Safety Data Sheet For MR Plywood PDF

PLYWOOD MATERIAL SAFETY DATA SHEET
FOR MR PLYWOOD
Page 1 of 4
st
1 November 2011
SECTION 1 : PRODUCT AND COMPANY IDENTIFICATION
1.1 Product Details
Product Name : Moisture Resistant (MR) EN 636-1 Plywood

Chemical Name : -
Chemical Formula : -
Chemical Family : -
Manufacturer’s Code : -
Use : Residential, commercial, industrial, furniture and
fitments and/or general purpose building material.
1.2 Company Identification
Manufacturer’s Name : Besgrade Products Sdn. Bhd.

Manufacturer’s Address : Batu 10, Jalan Pokok Sena,
Mukim Jabi, 06400 Alor Star,
Kedah, Malaysia.
Telephone No. : (604) 7822936
Emergency Telephone No.: (604) 7822936
Website : www.besgrade.com
1.3 Contact Point
Designation : Marketing Manager

Telephone No. : (604) 7822936
SECTION 2 : COMPOSITION / INFORMATION ON INGREDIENT
Ingredients:
Substance/Chemical Entity CAS No. Properties by weight
Wood veneer None >88%
Urea formaldehyde resin None <12%
SECTION 3 : PHYSICAL AND CHEMICAL PROPERTIES
Appearance : The products are manufactured as pressed boards

ranging in standard thickness from 3.6mm to 25mm.
They are made from Malaysian Tropical Hardwood
veneers which are bonded together with resin.
FOR MR PLYWOOD
Page 2 of 4
st
1 November 2011
Odour : Dependent on wood species and time since dust was

generated.
Solubility : Insoluble on water
Boiling Point : Not applicable
Melting Point (°C) : Not applicable
Vapour Pressure : Not applicable
Percentage Volatiles : Not applicable
Evaporation Rate : Not applicable
Vapour Density : Not applicable
Specific Gravity : 0.50 - 1.00
Flash Point : Not applicable
Autoignition Temperature: -
Flammable in air : Fine airborne dust, generated when the product is
machined, can ignite spontaneously.
SECTION 4 : HAZARD IDENTIFICATION
Emergency Overview : The product may release small quantities of

formaldehyde in gaseous form. Emission will decrease
through time as the panel age. Manual or mechanical
cutting or abrasion processes performed on the product
may result in generation of wood dust.
Routes of entry : Inhalation and contact with skin and eyes.
SECTION 5 : FIRST AID MEASURES
Swallowed : Drink a glass of water.

Eye contact : Flush with flowing water for at least 15 minutes and if
symptoms persist seek immediate medical attention.
Skin contact : Wash with mild soap and running water.
Inhalation : Leave the dusty area.
Advice to Doctor : Treat symptomatically.
SECTION 6 : FIRE FIGHTING MEASURES
Fire fighting media : Water, Carbon dioxide (CO2), Powder, Foam.

Firefighter exposed for combustion products are
advised to use respiratory protection.
FOR MR PLYWOOD
Page 3 of 4
st
1 November 2011
SECTION 7 : ACCIDENTAL RELEASE MEASURE
Leak / Spill : Sweep or vacuum and avoid creating airborne dust

conditions.
Remove ignition source and provide good ventilation
where dust condition may occur.
Place recovered wood dust in container for proper
disposal.
SECTION 8 : HANDLING AND STORAGE
Handling : Avoid skin and eye contact. Avoid breathing dust.
Storage : Store in cool, dry, well ventilated place away from

source of heat, flames or sparks.
SECTION 9 : EXPOSURE CONTROL AND PERSONAL PROTECTION
Ventilation : Ensure ventilation is adequate and that air concentration

of components is controlled below quoted exposure
standards.
Personal Protection : Wear overalls, safety glasses, respiratory, impervious

gloves.
Always wash hand before eating and drinking.
SECTION 10 : STABILITY AND REACTIVITY
Stability : The product is stable.
SECTION 11 : TOXICOLOGICAL INFORMATION
Routes of Entry : Inhalation and contact with skin and eyes.
Skin contact : Causes irritations and sensitisation.
Skin Absorption : Not applicable.
Eye contact : Causes eye irritations.

FOR MR PLYWOOD
Page 4 of 4
st
1 November 2011
SECTION 12 : ECOLOGICAL INFORMATION
No Data Available
SECTION 13 : DISPOSAL INFORMATION
Disposal of waste to in accordance with Environmental Quality (Scheduled Waste)

Regulation 1989 and other guidelines issued by DOE and/or local authorities.
When cured, the resin may be disposed of on an ordinary landfill.
SECTION 14 : TRANSPORT INFORMATION
This product is not regulated.
SECTION 15 : REGULATORY INFORMATION
a. Proposed classification : N/A
b. Risk Phrase : N/A
c. Safety Phrase : N/A
SECTION 16 : OTHER INFORMATION
This information is furnished without warranty, expressed or implied, except that is

accurate to the best of our knowledge. The data on this sheet relate only to the specific
material designated herein. We assume no legal responsibility for injury or damage
arising from use or reliance upon these data. Precautions in this data sheet may not be
adequate for all individuals and/or situations. It is the user's obligation to evaluate and
use this product safely and to comply with all applicable laws and regulation.

Plywood Material Safety Data Sheet For MR Plywood PDF

Uploaded by

Copyright:

Available Formats

Plywood Material Safety Data Sheet For MR Plywood PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Plywood Material Safety Data Sheet For MR Plywood PDF

Uploaded by

Copyright:

Available Formats

PLYWOOD MATERIAL SAFETY DATA SHEET

SECTION 1 : PRODUCT AND COMPANY IDENTIFICATION

1.1 Product Details

Product Name : Moisture Resistant (MR) EN 636-1 Plywood

1.2 Company Identification

Manufacturer’s Name : Besgrade Products Sdn. Bhd.

1.3 Contact Point

Designation : Marketing Manager

SECTION 2 : COMPOSITION / INFORMATION ON INGREDIENT

Wood veneer None >88%

Urea formaldehyde resin None <12%

SECTION 3 : PHYSICAL AND CHEMICAL PROPERTIES

Appearance : The products are manufactured as pressed boards

Odour : Dependent on wood species and time since dust was

SECTION 4 : HAZARD IDENTIFICATION

Emergency Overview : The product may release small quantities of

SECTION 5 : FIRST AID MEASURES

Swallowed : Drink a glass of water.

SECTION 6 : FIRE FIGHTING MEASURES

Fire fighting media : Water, Carbon dioxide (CO2), Powder, Foam.

SECTION 7 : ACCIDENTAL RELEASE MEASURE

Leak / Spill : Sweep or vacuum and avoid creating airborne dust

SECTION 8 : HANDLING AND STORAGE

Handling : Avoid skin and eye contact. Avoid breathing dust.

Storage : Store in cool, dry, well ventilated place away from

SECTION 9 : EXPOSURE CONTROL AND PERSONAL PROTECTION

Ventilation : Ensure ventilation is adequate and that air concentration

Personal Protection : Wear overalls, safety glasses, respiratory, impervious

SECTION 10 : STABILITY AND REACTIVITY

Stability : The product is stable.

SECTION 11 : TOXICOLOGICAL INFORMATION

Routes of Entry : Inhalation and contact with skin and eyes.

Skin contact : Causes irritations and sensitisation.

Skin Absorption : Not applicable.

Eye contact : Causes eye irritations.

SECTION 12 : ECOLOGICAL INFORMATION

SECTION 13 : DISPOSAL INFORMATION

Disposal of waste to in accordance with Environmental Quality (Scheduled Waste)

SECTION 14 : TRANSPORT INFORMATION

This product is not regulated.

SECTION 15 : REGULATORY INFORMATION

a. Proposed classification : N/A

b. Risk Phrase : N/A

c. Safety Phrase : N/A

SECTION 16 : OTHER INFORMATION

This information is furnished without warranty, expressed or implied, except that is

You might also like