Scribd Logo
Upload

Welcome to Scribd!

  • 129 views

    M J251 Spec

    Uploaded by

    jiaozhongxing
    The J-251-LS single boom jumbo drill carrier is designed for efficient drilling of large limestone mine headings up to 50 feet wide and 35 feet high. It carries fuel and water to operate for a full 10-hour shift without service. The self-contained diesel hydraulic machine has four stabilizers that lift it 1 foot off the ground and optional stabilizers that lift it 3.5 feet. It has an articulated operator cab for improved visibility and controls that are conveniently located. The machine is designed for maximum serviceability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    M J251 Spec

    Uploaded by

    jiaozhongxing
    129 views2 pages
    The J-251-LS single boom jumbo drill carrier is designed for efficient drilling of large limestone mine headings up to 50 feet wide and 35 feet high. It carries fuel and water to operate for a full 10-hour shift without service. The self-contained diesel hydraulic machine has four stabilizers that lift it 1 foot off the ground and optional stabilizers that lift it 3.5 feet. It has an articulated operator cab for improved visibility and controls that are conveniently located. The machine is designed for maximum serviceability.

    Original Description:

    mJ251spec

    Original Title

    mJ251spec

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The J-251-LS single boom jumbo drill carrier is designed for efficient drilling of large limestone mine headings up to 50 feet wide and 35 feet high. It carries fuel and water to operate for a full 10-hour shift without service. The self-contained diesel hydraulic machine has four stabilizers that lift it 1 foot off the ground and optional stabilizers that lift it 3.5 feet. It has an articulated operator cab for improved visibility and controls that are conveniently located. The machine is designed for maximum serviceability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    129 views2 pages

    M J251 Spec

    Uploaded by

    jiaozhongxing
    The J-251-LS single boom jumbo drill carrier is designed for efficient drilling of large limestone mine headings up to 50 feet wide and 35 feet high. It carries fuel and water to operate for a full 10-hour shift without service. The self-contained diesel hydraulic machine has four stabilizers that lift it 1 foot off the ground and optional stabilizers that lift it 3.5 feet. It has an articulated operator cab for improved visibility and controls that are conveniently located. The machine is designed for maximum serviceability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    FLETCHER

    Model J-251-LS Single Boom Jumbo Drill Carrier

    Specifications
    Single boom jumbo is designed specifically for All operator controls for drilling and tramming are
    limestone mines and efficient drilling of headings as either pilot operated of 24vdc solenoid controlled,
    large as 50 ft. wide and 35 ft. high in one set up. minimizing the noise and heat generated in the cab.
    All controls are conveniently located for comfortable
    Self contained, diesel hydraulic jumbo drill, provides operation from the standard “captains” style seat.
    the flexibility required to handle face, bench and roof
    bolt drilling requirements. J-251-LS carries all fuel All hydraulic, infinitely variable, rock responsive drill
    and pelletizing water necessary to operate a full 10 hydraulic system allows the machine to be matched
    hour shift without service. to your drilling requirements. All drill system valves
    are leak free replaceable cartridges in manifolds and
    Four ram type stabilizers (two each front and rear) lift are in readily accessible cabinets.
    the complete machine 1 ft. off ground. Optional
    stabilizers lift machine 3.5 ft. Front stabilizers extend Flushing air is provided by an onboard hydraulic driven
    out to a 14 ft. wide stance for the improved stability screw air compressor with high pressure output for
    required for full width hole locations. better hole cleaning and more efficient drilling. A
    horizontal 200 gallon water tank carries the water
    Tram drive is provided by an engine driven closed loop required for pelletizing.
    hydrostatic system driving through a two-speed drop
    box and drive shafts to both axles. A single joystick Engine compartment covers are hinged and are easily
    controls tram speed, direction and steering. opened for improved maintenance access. An
    optional enclosed engine compartment with hinged
    Optional exclusive “articulated” operator cab tilts and doors reduces noise levels.
    swings providing unparalleled comfort and visibility for
    hard to see rib and roof holes. Cab includes a Engine radiator and hydraulic/air compressor coolers
    standard air conditioner/heater with filtered pressurizer are remote mounted at the back of the machine and
    and designed to achieve an 80 dba noise level. swing open for complete access for cleaning.

    Complete machine design and component location to


    maximize serviceability.
    Model J-251-LS

    General Specifications
    Engine Cummins QSB5.9 Water Tank 200 gallons
    Height 9’11” Hydraulic Tank 45 gallons
    Overall Width 8’6” Filters - Suction magnetic & 100 mesh
    Length - Chassis 21’3” Filters - Return 3 micron
    Length - Overall 43’ Filters - Pressure 3 micron
    Weight (complete) 50,000 lbs. Air Filters Donaldson
    Wheel Base 136” Precleaners Turbinair
    Articulation 80 degrees Compressor 150cfm @ 150psi
    Axle Oscillation 10 degrees Electrics 24vdc
    Gradeability 40 percent Tires 14.00x20 SXMH, 20 ply
    Maximum Speed 5 mph Operator Cab 80 dba, heater/air conditioner
    Fuel Tank 80 gallons with filtered pressurizer

    Fletcher Options
    PERB175 Boom Wireless angle indicator for feed tilt
    Boom Soft Ride Wireless angle indicator for feed swing and feed tilt
    Single lever boom control system Hole depth system
    Ansul fire suppression Greasing system
    Articulated operators cab High output marine drill lights
    Operator cab for low height Filled tires
    High lift stabilizers to lift machine 3.5 ft Exhaust purifier
    Dual output air compressor 210 Exhaust particulate filter
    cfm@125psi/150 cfm@150 psi Caterpillar, Deere or Deutz diesel engine
    Engine compartment side doors Electric powered drill hydraulic system with or without cable reel.

    J. H. Fletcher & Co. cannot anticipate every Specifically engineered for each customer’s needs.
    mine hazard that may develop during use of
    these products. A roof control plan must be
    approved by MSHA before use of these prod- J. H. Fletcher & Co.
    ucts begins. Proper use, maintenance and
    continued use of (OEM) original equipment
    402 High St. P.O. Box 2187
    parts will be essential for maximum Huntington, WV 25702-2187
    operating results.
    [email protected]
    C 12/2003 J. H. Fletcher & Co. (rev 9/2009) 304-525-7811

    You might also like