W7 WATER LEVEL METER

Datasheet W7

Description
Water Level Meters are used to measure the depth of water in The meter is simple to use and being portable, can be used at many
standpipes, wells and boreholes. locations. The tape design prevents it from sticking to wet surfaces,
such as the lining of a borehole, ensuring accurate measurements.
The meter comprises a Stainless Steel probe fitted to a flexible
graduated cable which is wound on to a hand reel containing a There are two versions of the Water Level Meter; one with a small
transistorised switched circuit, audio (buzzer) and visual (LED light) diameter probe and one with a diameter standard probe.
indicators and a battery The standard probe version is also available with an optional
digital temperature indicator.

Features Benefits

One instrument reads at many locations Easily portable

Contoured tape for accurate readings Tape design prevents tape sticking to wet surfaces
Tape range; 30m–500m with 1mm divisions Economic water level monitoring
Lightweight Ideal for boreholes with small diameters
Simple, reliable and easy to operate
Audible (buzzer) and visual (light) water level alert signals
Sensitivity adjustment for variations in water conductivity
Digital temperature indicator option available
Non-stretch polyethylene coated steel tape
Ø12mm slimline probe available

Comprehensive information about this product and our full range is available at www.soilinstruments.com
If you would like to speak with someone directly please call +44 (0)1825 765044 or email [email protected]

IMPORTANT
INFORMATION PRECISELY MEASURED
instrumentation and monitoring
 Operation Handle

The sensor probe incorporates an insulating gap which acts as a

switch, the circuit being completed when contact is made with the
water.

The cable consists of a non-stretch contoured tape with stranded

steel conductors, graduated at one millimetre intervals. Reel

The probe is lowered down a borehole on the end of the tape.

When it makes contact with water a buzzer sounds and an LED
light comes on, both located on the reel. A reading can then be
taken from the tape at the top of the borehole to indicate the
water depth.

A sensitivity control is accessible inside the hand reel to enable

adjustment to suit the water conductivity.

Applications Tape

The Water Level Meter is ideal for site investigations such as:
• Water levels in open boreholes
• Control of de-watering and drainage operations
• Construction control and stability monitoring of dams,
reservoirs and embankments Standpipe
• Hydrological and hydrogeological investigations of
water resources
• Pollution and environmental studies
• In-situ permeability measurements and pumping tests
• Stability investigations of natural and cut slopes

Probe
Water level

Associated products

For details on: Catalogue code:

VW Standpipe Piezometer W1

View our full product range on www.soilinstruments.com

THE TECHNICAL RATING FOR THIS PRODUCT: INTERMEDIATE

As the correct installation of any monitoring sensor The installer is trained and experienced in the installation
or system is vital to maximise performance and ADVANCED of this type of instrument or systems, and is ideally a
accuracy, Soil Instruments makes the following specialist Instrumentation and Monitoring contractor.
recommendations, for the skill level of the installation
contractor.
The installer already has previous experience and/or
ADDITIONAL SUPPORT INTERMEDIATE training in the installation of this instrument or system.
We offer installation and monitoring services
to support this system. For more information As a minimum the installer has read and fully
please email : [email protected] BASIC comprehends the manual, and if possible has observed
or call : +44 (0) 1825 765044 these instruments or systems being installed by others.
 Specifications

Probe
Type Standard1 Slimline
Diameter 15mm 12mm
Length 230mm 170mm
Type Shrouded
Material Stainless Steel

Tape
Lengths 30m 50m 100m 150m 200m 300m 500m
Weights 1.7Kg 2Kg 3Kg 3.8Kg 4.6Kg 7Kg 11.5Kg
Type Contoured/Stranded conductors
Material Copper conductors/Steel tape/Polypropylene coated
Width 9.4mm
Graduations m | cm | mm
Resolution ±1mm

Reel
Indicators Audio and visual
Sensitivity control Internal
Battery type PP3/6LR61/MNI604
Battery life 12 hours’ continuous use
Reel material Steel frame/Polypropylene hub

1
The Standard Probe is also available with a Digital Temperature Indicator. Please contact Sales for further information

Soil Instruments Limited has an ongoing policy of design review and reserves the right to amend these specifications without notice.
W7 - Water Level Meter - DS1114 - Rev1.3.8
 Ordering information

Water Level Meter with a Slimline Probe – Metric

12mm diameter shrouded probe, metric graduated flat tape
W7-6.1-30 30m length tape
W7-6.1-50 50m length tape
W7-6.1-100 100m length tape
W7-6.1-150 150m length tape
W7-6.1-200 200m length tape
W7-6.1-300 300m length tape
W7-6.1-500 500m length tape

Water Level Meter with a Standard Probe – Metric

15mm diameter shrouded probe, metric graduated flat tape
W7-T-15-30 30m length tape
W7-T-15-50 50m length tape
W7-T-15-100 100m length tape
W7-T-15-150 150m length tape
W7-T-15-200 200m length tape
W7-T-15-300 300m length tape
W7-T-15-500 500m length tape

Manuals
MAN-52 Standpipe Piezometer
MAN-54 Water Level Meter

ISO
9001 Bell Lane, Uckfield, East Sussex
Quality
Management TN22 1QL United Kingdom t: +44 (0) 1825 765044 e: [email protected] w: www.soilinstruments.com
FM 611948 Soil Instruments Limited. Registered in England. Number: 07960087. Registered Office: 3rd Floor, 1 Ashley Road, Altrincham, Cheshire, WA14 2DT