Scribd
Upload
38 views4 pages

PCIC 2015 Final Color

RFCTs can be placed around motor power conduits and generator stator neutral conduits to collect EMI and partial discharge (PD) data. EMI data can also be collected from motor frame grounds, generator frame safety grounds, isolated phase bus support grounds, and transformer tank or bushing grounds. These locations are typically used to collect EMI and PD monitoring data from equipment.

Uploaded by

Elias Gabriel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views4 pages

PCIC 2015 Final Color

RFCTs can be placed around motor power conduits and generator stator neutral conduits to collect EMI and partial discharge (PD) data. EMI data can also be collected from motor frame grounds, generator frame safety grounds, isolated phase bus support grounds, and transformer tank or bushing grounds. These locations are typically used to collect EMI and PD monitoring data from equipment.

Uploaded by

Elias Gabriel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Typical Equipment

RFCT Placement Locations

RFCT can be placed around the motor power conduit. (EMI)

EMI data can also be collected from the motor frame ground. (EMI)
Typical
RFCT Placements

RFCT preferred location to collect generator data is from the stator neutral conduit
(EMI & PD)
A generator frame safety ground is also often used for data collection. (EMI)

Isolated phase bus data is usually collected from a support ground.


(EMI)
RFCT placed around one of the transformer tank safety grounds or the H0 or X0
bushing ground.
(EMI & PD)

You might also like