Scribd
Upload
204 views4 pages

Compressed Air Production Using Vehicle Suspension

This document discusses a project to produce compressed air using a vehicle's suspension system. The system collects air from the air cylinder of the suspension and stores it in a compressor tank. It works by converting the kinetic energy of the vehicle's suspension into potential energy in the form of compressed air. The major components are an air cylinder, quick exhaust valve, non-return valve, and spring arrangement. The system has the advantages of not requiring fuel or electrical power input. It can produce compressed air simply by running the vehicle or driving over speed bumps. With widespread vehicle use, this presents a potential non-conventional method of producing compressed air on a large scale.

Uploaded by

Ajit Kalasait
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
204 views4 pages

Compressed Air Production Using Vehicle Suspension

This document discusses a project to produce compressed air using a vehicle's suspension system. The system collects air from the air cylinder of the suspension and stores it in a compressor tank. It works by converting the kinetic energy of the vehicle's suspension into potential energy in the form of compressed air. The major components are an air cylinder, quick exhaust valve, non-return valve, and spring arrangement. The system has the advantages of not requiring fuel or electrical power input. It can produce compressed air simply by running the vehicle or driving over speed bumps. With widespread vehicle use, this presents a potential non-conventional method of producing compressed air on a large scale.

Uploaded by

Ajit Kalasait
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

Synopsis

Title: Compressed air production using vehicle suspension


1. Introduction

In this project we are collecting air from the air cylinder and store this energy to

the compressor tank as non-conventional method by simply driving the vehicle. Non-

conventional energy system is very essential at this time to our nation. Compressed air

production using vehicle suspensor needs no fuel input power to produce the output of

the air.

For this project the conversion of the force energy in to air. The control

mechanism carries the air cylinder (vehicle suspensor), quick exhaust valve, non-return

valve and spring arrangement. We have discussed the various applications and further

extension also. The initial cost of this arrangement is high.

For this project the conversion of the force energy in to air. The control

mechanism carries the air cylinder, quick exhaust valve , non-return valve and cylinder

arrangement. We have discussed the various applications and further extension also. The

Indian road has high speed breaker so at that suspension can generate lot of air. It can be

incorporated at every vehicle where as number of cars are available. So this project is

implemented to all vehicles as well as for all cars, the air production is very high. The

initial cost of this arrangement is high.

2. Objectives of the Project


 Understand the construction and working of vehicle suspension
 Develop the demonstration model of Compressed air production using vehicle

suspension
3. Major parts used in Compressed air production using vehicle

 Foot operated or Speed breaker arrangement


 Pneumatic valve

 Tubing

 Dial gauge

 Pneumatic cylinder

 Non Return Valve

 Return cylinder

4. Working Compressed air production using vehicle


The flange, arrangement is fixed at the back shock absorber which is mounded

bellow the L-shapes window. The pressurized cylinder is used to return the inclined

vehicle boy in same position by releasing the load. The cylinder shaft is connected to the

supporter by bush. The larger shaft is also coupled with the cylinder, so that it is moving

in same time. The return cylinder is coupled to the low location as in operation there will

be no jerk will be experienced by the human which is seated on the vehicle this

arrangement.
The weight is used to transfer the force to the cylinder piston by movement of

suspension. The air is pressed in forward direction for the compressed air production .The

internal vale gives the air in cylinder in this motion till this cycle the valve is open when

the suspension gets to normal then the non return valve locks the air in from coming in

when the piston is going for its resting position. The compressed air at the non return

valve is generated .from this movement .the return pressurized cylinder take the

arrangement to its resting operation position smoothly


 Major types by Application of Compressed air production using vehicle
Vehicular (general)
 Automobile Powertrain
 Motorcycles
 Automobile non-Powertrain
5. Advantages Compressed air production using vehicle

Nowadays almost all the automobile vehicle is being atomized in order to product

the human being. The automobile vehicle is being atomized for the following reasons.

 Air production is simply running the vehicle

 Air also Produced by running the vehicle on speed breaker

 No need fuel input and Electrical Power input

 This is a Non-conventional system

6. Conclusion

In concluding the words of our project, since the air production using foot

arrangement give its energy requirements from the Non-renewable source of energy.
There is no need of power from the mains and there is less pollution in this source of

energy. It is very useful to the places and all roads.

It is able to extend this project by using changed arrangement and construct in the

footsteps/speed breaker so that increase the power production rate by fixing school and

colleges, highways etc.

You might also like