Scribd
Upload
26 views4 pages

Command

Uploaded by

Kenny Yeoh Kai Xiang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
26 views4 pages

Command

Uploaded by

Kenny Yeoh Kai Xiang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Command

Command: _box
Specify first corner or [Center]:
Specify other corner or [Cube/Length]: l
Specify length <300.0000>: 320
Specify width <25.0000>: 25
Specify height or [2Point] <-25.0000>: 150

Command: _cylinder
Specify center point of base or [3P/2P/Ttr/Elliptical]:
Specify base radius or [Diameter] <20.0000>: 20
Specify height or [2Point/Axis endpoint] <-150.0000>: 25
Command: 3DROTATE
Current positive angle in UCS: ANGDIR=counterclockwise
ANGBASE=0
Select objects: 1 found
Select objects:
Specify base point:
** ROTATE **
Specify rotation angle or [Base
point/Copy/Undo/Reference/eXit]: Regenerating model.
Command: Specify opposite corner or
[Fence/WPolygon/CPolygon]:
Copy cylinder to top of the box

Command: SUBTRACT
Select solids, surfaces, and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects: 1 found, 4 total
Select objects: 1 found, 5 total
Select objects: 1 found, 6 total
Select objects: 1 found, 7 total
Select objects: 1 found, 8 total
Select objects:
Command: Specify opposite corner or
[Fence/WPolygon/CPolygon]: Enter
Command: _cylinder
Specify center point of base or [3P/2P/Ttr/Elliptical]:
Specify base radius or [Diameter] <40.0000>:
Specify height or [2Point/Axis endpoint] <-25.0000>: 100
Cantumkan cylinder dengan box

Cantumkan lagi di bahagian belakang box

Cantumkan screw bersama dengan cylinder dan box


Command: ZOOM
Specify corner of window, enter a scale factor
(nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Wi
ndow/Object] <real time>: a
Regenerating model.

Lukisan Ortografik
Pergi ke halaman Layout 1
Select object : all
Command : delete <enter>
Command: SOLVIEW
Enter an option [Ucs/Ortho/Auxiliary/Section]: U
Enter an option [Named/World/?/Current]
<Current>: C
Enter view scale <1>: 1
Specify view center:
Specify view center <specify viewport>:
Specify first corner of viewport:
Specify opposite corner of viewport:
Enter view name: PELAN

Enter an option [Ucs/Ortho/Auxiliary/Section]: O


Specify side of viewport to project:
Specify view center:
Specify view center <specify viewport>:
Enter view name: HADAPAN

Enter an option [Ucs/Ortho/Auxiliary/Section]: O


Specify side of viewport to project:
Specify view center:
Specify first corner of viewport:
Specify opposite corner of viewport:
Enter view name: SISI

Command: soldraw
Select viewports to draw..
Select objects: Specify opposite corner: 3 found
Select objects:
21 solids selected.
Lukis Isometrik
Command: mview
Specify corner of viewport or
[ON/OFF/Fit/Shadeplot/Lock/Object/Polygonal/
Restore/LAyer/2/3/4] <Fit>:
Specify opposite corner: Regenerating model.
Melabelkan lukisan ortografik
Command: mtext
Labelkan semua lukisan ortografik dan satu
lukisan isometric.

Command: layer

You might also like