Scribd Logo
Upload

Welcome to Scribd!

  • 78 views

    EST Question

    Uploaded by

    ash
    This document appears to be an end semester examination for an electrical engineering course. It contains 5 questions assessing various electrical engineering concepts. Question 1 has two parts assessing node voltage analysis and maximum power transfer. Question 2 has two parts assessing series resonance and RLC circuit analysis. Question 3 has two parts assessing star connected impedances and power measurement using wattmeters. Question 4 has two parts assessing DC generator parameters and mutual inductance. Question 5 has two parts assessing transformer phasor diagrams and open/short circuit tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    EST Question

    Uploaded by

    ash
    78 views3 pages
    This document appears to be an end semester examination for an electrical engineering course. It contains 5 questions assessing various electrical engineering concepts. Question 1 has two parts assessing node voltage analysis and maximum power transfer. Question 2 has two parts assessing series resonance and RLC circuit analysis. Question 3 has two parts assessing star connected impedances and power measurement using wattmeters. Question 4 has two parts assessing DC generator parameters and mutual inductance. Question 5 has two parts assessing transformer phasor diagrams and open/short circuit tests.

    Original Description:

    questions

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document appears to be an end semester examination for an electrical engineering course. It contains 5 questions assessing various electrical engineering concepts. Question 1 has two parts assessing node voltage analysis and maximum power transfer. Question 2 has two parts assessing series resonance and RLC circuit analysis. Question 3 has two parts assessing star connected impedances and power measurement using wattmeters. Question 4 has two parts assessing DC generator parameters and mutual inductance. Question 5 has two parts assessing transformer phasor diagrams and open/short circuit tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    78 views3 pages

    EST Question

    Uploaded by

    ash
    This document appears to be an end semester examination for an electrical engineering course. It contains 5 questions assessing various electrical engineering concepts. Question 1 has two parts assessing node voltage analysis and maximum power transfer. Question 2 has two parts assessing series resonance and RLC circuit analysis. Question 3 has two parts assessing star connected impedances and power measurement using wattmeters. Question 4 has two parts assessing DC generator parameters and mutual inductance. Question 5 has two parts assessing transformer phasor diagrams and open/short circuit tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Roll Number:__________________________

    Thapar University, Patiala


    Department of Electrical and Instrumentation Engineering
    END SEMESTER EXAMINATION
    B.E. (First Year): Semester–II (2016-2017) Course Code: UEE001
    Course Name: Electrical Engineering
    16/05/2017 Tuesday, 14:00 PM– 17:00 PM
    Time: 3 Hours, M. Marks: 100 (36%) Name of Faculty:
    SG,SUM,NK,AS,SS,PBK,SP,MK,SKA

    Note: Attempt all questions sequentially. All parts of any question should be answered in
    the same place.

    Q1. (a) Determine the voltages at nodes B and C of the network shown in Figure 1. [10]

    0.2Ω 0.3Ω 0.1Ω


    B C D
    A
    30A 20A
    120V 116 V

    H E
    G F
    Figure 1

    (b) Find the value of RL of the network shown in Figure 2 for maximum power [10]
    2Ω
    transfer. Also calculate the maximum value of power transfer.

    1Ω 1Ω

    10V 2Ω RL
    2A

    Figure 2
    Q2. (a) Describe the sharpness of series resonance with suitable diagram and derive [12]
    the necessary expression of bandwidth. Also derive the expression for
    quality factor.
    (b) A series R-L-C circuit is connected to a 230 V, 50 Hz, single phase AC [08]
    supply.
    The value of R = 5 Ω, L = 13 mH and C = 140 µF. Find (i) total reactance,
    (ii) impedance, (iii) current drawn, and (iv) power factor of the circuit.
    Q3. (a) Three impedances each having a resistance of 20Ω and an inductive [10]
    reactance
    of 15Ω are connected in star across a 400 V, 3-φ supply. Calculate (i) the
    line
    current, (ii) the power factor , and (iii) the total power in kW.
    (b) Two wattmeters were used to measure the power of a balanced 3-φ system [10]
    and
    the readings of two wattmeter were 16.2 kW and – 8.2 kW. The line voltage
    was 440 V. Determine (i) total active power drawn, (ii) power factor, and
    (iii)
    line current.
    Q4. (a) A DC shunt generator delivers 195 A at a terminal voltage of 250 V. The [12]
    armature resistance and shunt field resistance are 0.02Ω and 50Ω
    respectively. The iron and friction losses are equal to 950 W. Find (a) EMF
    generated, (b) total Cu-loss, and (c) efficiency of the generator.
    (b) Two coils with a co-efficient of coupling of 0.6 between them are connected [08]
    in the series so as to magnetize (i) in the same direction and (ii) in the
    opposite
    direction. The corresponding values of equivalent inductances for (i) and (ii)
    are 1.8 H and 0.8 H respectively. Find the self-inductance of these two coils
    and the mutual inductance between them.
    Q5. (a) Draw the phasor diagram of an ideal transformer at no-load and also the [4]
    phasor diagram of a transformer at no-load.
    (b) With the help of neat circuit diagram describe the open circuit test and short [16]
    circuit test of the transformer to obtain the equivalent circuit parameters.
    PLEASE SEE YOUR EVALUATED ANSWER SCRIPT ON 25/05/2017 AT 11 A.M.

    VENUE:

    GROUP-J (E101), GROUP-K (E102), GROUP-L (D205), GROUP-M (E103),


    GROUP-N (E104), GROUP-O (D206), GROUP-P (E105), GROUP-Q (E106),
    GROUP-R (D207)

    You might also like