Scribd
Upload
97 views2 pages

International Well Control Forum Surface BOP Kill Sheet - Vertical Well (Metric/Bar)

This document is a surface BOP kill sheet for a vertical well. It provides data on formation strength, current well parameters, pump specifications, drill string and annulus volumes, and kick details to calculate the initial and final circulating pressures needed to kill the well. The sheet includes the surface leak off pressure, maximum drilling fluid density, shoe depth, pump displacement volumes, drill string and open hole volumes, shut-in drill pipe pressure, and kick details like shut-in casing pressure. These details are used to calculate the initial circulating pressure to balance the kick, the kill mud weight, and estimated pressure required to circulate out the kick over time.

Uploaded by

mohamad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
97 views2 pages

International Well Control Forum Surface BOP Kill Sheet - Vertical Well (Metric/Bar)

This document is a surface BOP kill sheet for a vertical well. It provides data on formation strength, current well parameters, pump specifications, drill string and annulus volumes, and kick details to calculate the initial and final circulating pressures needed to kill the well. The sheet includes the surface leak off pressure, maximum drilling fluid density, shoe depth, pump displacement volumes, drill string and open hole volumes, shut-in drill pipe pressure, and kick details like shut-in casing pressure. These details are used to calculate the initial circulating pressure to balance the kick, the kill mud weight, and estimated pressure required to circulate out the kick over time.

Uploaded by

mohamad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
You are on page 1/ 2

PAGE 1 OF 2

DATE :
International Well Control Forum
Surface BOP Kill Sheet - Vertical Well (Metric/Bar) NAME :

FORMATION STRENGTH DATA: CURRENT WELL DATA::


SURFACE LEAK -OFF PRESSURE FROM
FORMATION STRENGTH TEST (A) bar

DRILLING FLUID DENSITY AT TEST (B) kg/l

MAX. ALLOWABLE DRILLING FLUID DENSITY =


CURRENT DRILLING FLUID:
(A) x 10.2
(B) + = (C) kg/l DENSITY kg/l
SHOE T.V. DEPTH

INITIAL MAASP =

((C) - Current Density) x Shoe TVD = bar


10.2 CASING SHOE DATA:
SIZE in

M. DEPTH m
PUMP NO. 1 DISPL. PUMP NO. 2 DISPL. T.V. DEPTH m

l / stroke l / stroke

HOLE DATA:
(PL) DYNAMIC PRESSURE LOSS [bar]
SIZE in
SLOW PUMP
PUMP NO. 1 PUMP NO. 2
RATE DATA: M. DEPTH m

T.V. DEPTH m
SPM

SPM

PRE-RECORDED LENGTH CAPACITY VOLUME PUMP STROKES TIME


VOLUME DATA: m l/m litres stks minutes

DRILL PIPE x =
VOLUME PUMP STROKES
HEAVY WALL DRILL PIPE x = +
PUMP DISPLACEMENT SLOW PUMP RATE
DRILL COLLARS x = +

DRILL STRING VOLUME (D) l (E) stks min

DC x OPEN HOLE x =

DP / HWDP x OPEN HOLE x = +

OPEN HOLE VOLUME (F) l stks min

DP x CASING x = (G) + stks min

TOTAL ANNULUS VOLUME (F+G) = (H) l stks min

TOTAL WELL SYSTEM VOLUME (D+H) = (I) l stks min

ACTIVE SURFACE VOLUME (J) l stks

TOTAL ACTIVE FLUID SYSTEM (I +J) l stks


Dr No SV 01/01
(BAR-102)
27-01-2000
PAGE 2 OF 2

DATE :
International Well Control Forum
Surface BOP Kill Sheet - Vertical Well (Metric/Bar) NAME :

KICK DATA :
SIDPP bar SICP bar PIT GAIN litres

KILL FLUID DENSITY SIDPP x 10.2


CURRENT DRILLING FLUID DENSITY +
TVD
................. + =
KMD ................ kg / l

INITIAL CIRCULATING DYNAMIC PRESSURE LOSS + SIDPP


PRESSURE
................. + ................. =
ICP ............... bar

KILL FLUID DENSITY


FINAL CIRCULATING x DYNAMIC PRESSURE LOSS
CURRENT DRILLING FLUID DENSITY
PRESSURE
FCP x ................. =
............... bar

(K) x 100
(K) = ICP - FCP Bar ------------ = Bar/100 strokes
(E)

STROKES PRESSURE
[bar]
STATIC & DYNAMIC DRILL PIPE PRESSURE [bar]

STROKES

Dr No SV 01/02 (BAR-102) 27-01-2000

You might also like