Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    CE7730 Advanced Finite Element Analysis Jan-May 2019 Assignment 4 (Due Date: 16-03-2019)

    Uploaded by

    Phanindra Attada
    1. Use a 9/3 finite element to determine displacements and stresses in a cantilever plate due to a temperature rise, assuming plane strain. The plate has dimensions of 50x20x10 mm and material properties are given. 2. Check if a given stress interpolation matrix is reasonable for a 9/3 quadrilateral element. 3. Extend the formulation of a 4/1 axisymmetric element to analyze stresses in a thick cylinder with given dimensions under an internal pressure, with one end fixed and the other free. Compute stresses using this single element.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CE7730 Advanced Finite Element Analysis Jan-May 2019 Assignment 4 (Due Date: 16-03-2019)

    Uploaded by

    Phanindra Attada
    16 views1 page
    1. Use a 9/3 finite element to determine displacements and stresses in a cantilever plate due to a temperature rise, assuming plane strain. The plate has dimensions of 50x20x10 mm and material properties are given. 2. Check if a given stress interpolation matrix is reasonable for a 9/3 quadrilateral element. 3. Extend the formulation of a 4/1 axisymmetric element to analyze stresses in a thick cylinder with given dimensions under an internal pressure, with one end fixed and the other free. Compute stresses using this single element.

    Original Description:

    klj

    Original Title

    hikguikgu

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. Use a 9/3 finite element to determine displacements and stresses in a cantilever plate due to a temperature rise, assuming plane strain. The plate has dimensions of 50x20x10 mm and material properties are given. 2. Check if a given stress interpolation matrix is reasonable for a 9/3 quadrilateral element. 3. Extend the formulation of a 4/1 axisymmetric element to analyze stresses in a thick cylinder with given dimensions under an internal pressure, with one end fixed and the other free. Compute stresses using this single element.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views1 page

    CE7730 Advanced Finite Element Analysis Jan-May 2019 Assignment 4 (Due Date: 16-03-2019)

    Uploaded by

    Phanindra Attada
    1. Use a 9/3 finite element to determine displacements and stresses in a cantilever plate due to a temperature rise, assuming plane strain. The plate has dimensions of 50x20x10 mm and material properties are given. 2. Check if a given stress interpolation matrix is reasonable for a 9/3 quadrilateral element. 3. Extend the formulation of a 4/1 axisymmetric element to analyze stresses in a thick cylinder with given dimensions under an internal pressure, with one end fixed and the other free. Compute stresses using this single element.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    CE7730 Advanced Finite Element Analysis

    Jan-May 2019
    Assignment 4 (Due Date: 16-03-2019)

    1. Using one 9/3 element determine stresses in cantilever plate due to a temperature rise of
    . Assume plane strain conditions with the plate being 50 mm long, 20 mm wide at the
    base, and 10 mm wide at the tip (Figure 1). Use the following material parameters: ,
    , and . Report displacements and effective stresses at element
    centroid.

    20

    10

    x
    0 50

    Figure 1: Cantilever plate

    2. Check to see if the following stress interpolation matrix is a reasonable choice for a 9/3
    quadrilateral element:

    3. The formulation for the 4/1 element discussed in the text can handle plane stress and plane
    strain problem. Extend this formulation to analyze axisymmetric problems. Using only one
    element based on this formulation compute stresses in a thick cylinder subjected to an internal
    pressure of 1 MPa. The inner and outer diameters of the cylinder are 20 mm and 40 mm,
    respectively. The cylinder is 30mm long. One end of the cylinder is fixed and other is free. Assume
    that E = 200 GPa and = 0.499.

    You might also like