Voicedata PDF

LEGRAND CABLING SYSTEM 2
PERFORMANCE
FROM TECHNICAL ROOM
TO WORKSTATION
LEGRAND
CABLING SYSTEM2
LCS2
Solutions from technical
room to workstation
See pages 04 to 15
LCS2 copper
See pages 16 to 23
LCS2 fibre optic

See pages 24 to 29
LCS2 enclosures
See pages 30 to 39
LCS2 workstation
See pages 40 to 49
LCS2 services
See pages 50 to 53
Catalogue references
See pages 54 to 106
pour exemple
catalogue : xxxxxxx
number index
xxxxxxxx
Page Page Page Page Page Page

Cat.Nos Pack Cat.Nos Pack Cat.Nos Pack Cat.Nos Pack Cat.Nos Pack Cat.Nos Pack
No No No No No No
0090 00 0326 24 77 1 0330 72 81 3 0335 33 74 2 0462 31 91 1 0464 80 89 1

25 - 1 73 - 3 34 72 1 42 - 1 81 - 1
0097 99 87 10 26 - 1 75 - 3 35 - 1 43 - 1 82 84 1
27 - 1 76 - 3 36 - 1 55 90 1 83 87 1
0300 00 77 - 3 37 - 1 60 - 1 84 - 1
0327 37 72 1 78 - 3 38 - 1 64 - 1 85 - 1
0325 00 76 2000 44 77 1 39 - 1 70 91 1 86 - 1
80 - 3
01 - 2000 45 73 10 40 60 1 87 86 1
81 - 3
04 - 2000 46 - 10 40 64 1 0463 00 85 1 88 - 1
82 - 3
05 - 2000 47 - 10 44 - 1 06 - 1 89 - 1
06 - 2000 48 - 10 45 - 1 12 - 1 90 - 1
0331 00 77 10
07 - 2000 50 69 305 46 - 1 18 - 1
06 - 10
08 - 2000 51 - 305 51 68 1 19 - 1 0465 00 88 1
07 - 10
09 - 2000 52 - 305 52 - 1 21 - 1 00 90 1
08 - 10
10 - 2000 53 - 305 54 - 2 22 - 1 01 88 1
09 - 10
11 - 2000 54 63 305 55 - 2 23 - 1 01 90 1
10 - 10
12 - 2000 55 - 305 61 62 1 28 - 1 02 88 1
11 - 10
13 - 2000 56 - 500 62 - 1 29 - 1 05 - 1
12 - 10
14 - 2000 57 - 500 63 - 1 30 - 1 06 - 1
13 - 10
15 - 2000 58 - 500 64 - 2 33 - 1 07 - 1
27 - 10
50 - 2000 59 - 500 65 - 2 34 - 1 08 - 1
35 89 1
51 - 2000 60 73 1 66 - 2 35 - 1 09 - 1
47 77 10
52 - 2000 73 69 500 73 58 1 37 - 1 10 - 1
51 81 3
53 - 2000 74 - 500 76 - 2 38 - 1 11 - 1
52 - 3
54 - 2000 76 63 500 79 74 1 39 - 1 12 - 1
53 - 3
55 - 2000 77 59 500 88 68 1 52 - 1 13 - 1
57 - 3
58 - 2000 78 - 500 89 62 1 58 - 1 17 84 1
58 - 3
59 - 2000 80 83 1 90 58 1 59 - 1 18 - 1
93 77 1
60 - 2000 81 - 1 91 - 10 60 - 1 19 88 1
97 - 1
69 79 1 83 73 10 92 91 1 61 - 1 22 89 1
70 - 1 93 79 1 72 - 1 23 - 1
71 - 1 0332 60 65 1
0328 50 69 500 94 - 8 73 - 1 28 86 1
72 - 1 61 - 1
51 - 500 75 - 1 29 - 1
73 - 1 62 73 1
52 - 500 0347 95 84 20 76 - 1 30 - 1
74 - 1 79 88 1
53 - 500 78 - 1 31 - 1
75 - 1 80 74 1
54 - 500 0348 48 86 1 79 - 1 32 - 1
76 - 1 81 72 1
55 - 500 81 - 1 33 - 1
77 - 1 91 - 1
56 63 305 0364 53 89 1 84 - 1 38 - 1
78 - 1 93 - 1
57 - 305 54 - 1 85 84 1 39 - 1
79 - 1 58 - 500 86 - 1 40 - 1
0335 01 72 1
59 - 500 0365 80 87 20 41 89 4
0326 00 80 3 02 - 1
61 - 500 81 - 20 0464 50 86 1 42 - 4
01 - 3 05 - 1
62 - 500 82 - 1 51 - 1 45 88 1
02 - 3 06 - 1
63 - 500 52 - 1
03 - 3 07 - 1
71 - 1000 0400 00 53 - 1 0472 72 87 1
04 - 3 10 78 1
72 - 1000 54 - 1 75 - 1
05 - 3 11 - 1
73 - 1000 0462 00 90 1 56 - 1
06 - 3 74 - 1000 12 72 1 58 - 1 0473 62 87 1
01 - 1
07 - 3 78 59 500 13 - 1 02 - 1 60 - 1 63 - 1
08 - 3 88 74 1 16 - 1 03 - 1 61 - 1 91 - 1
09 - 3 91 - 1 17 - 1 06 - 1 62 - 1 92 - 1
10 - 3 18 - 1 07 - 1 63 - 1
11 - 3 0329 07 79 1 19 - 1 08 - 1 64 - 1 0476 83 87 1
12 - 3 20 80 1 09 - 1 66 - 1 93 86 1
13 - 3 0330 48 77 1 21 75 1 11 - 1 69 89 1 94 - 1
14 - 3 49 - 1 22 - 1 12 - 1 70 - 1 95 - 1
15 - 3 61 81 3 24 - 1 13 - 1 72 - 1 96 87 1
16 - 3 62 - 3 25 - 1 14 - 1 73 - 1
17 - 3 63 - 3 26 - 1 20 91 1 74 - 1 0482 20 87 1
20 77 1 65 - 3 27 - 1 23 - 1 76 - 1
21 - 1 69 - 3 30 74 1 25 - 1 77 - 1 0500 00
22 - 1 70 - 3 31 - 1 26 - 1 78 84 1
23 - 1 71 - 3 32 - 2 30 - 1 79 - 1 0515 00 70 4
Bold catalogue numbers are products normally available with Legrand (India) stockists.
02 Cat. nos. that are not bold - delivery within 4 - 8 weeks from the date of order.
Bold packing quantity is our mandatory packing. Orders to be placed by Legrand (India) stockists in multiples of the same.
Page Page Page Page Page Page
Cat.Nos Pack Cat.Nos Pack Cat.Nos Pack Cat.Nos Pack Cat.Nos Pack Cat.Nos Pack
No No No No No No
0515 01 70 4 0518 57 63 1 0765 91 66 10 5727 76 82 1/20 5757 11 94 10/100 6000 00

02 - 4 58 - 1 92 67 10 78 - 1/20 12 - 10/100
03 - 4 59 - 1 93 - 10 79 - 1/20 20 93 10/100 6339 10 88 1
04 - 4 60 - 1 94 66 5 81 - 1/20 21 94 10/100 11 - 1
05 - 4 61 - 1 95 67 5 82 - 1/20 22 - 10/100 12 65 10
10 64 4 62 - 1 96 - 5 85 - 1/20 30 93 5/50 13 - 10
11 - 4 63 - 1 97 71 5 88 - 1/20 31 94 5/50 14 - 10
12 - 4 64 - 1 89 - 1/20 32 - 5/50 15 - 10
13 - 4 65 - 1 0775 41 88 1 40 93 5/50 16 - 10
14 - 4 66 59 5 5728 06 61 10 41 94 5/30 17 - 10
15 - 4 67 - 5 0778 80 73 1 22 66 10 42 - 5/30 24 - 1
68 - 5 81 - 1 24 - 10 50 93 5/50 25 - 1
0516 36 69 1 69 - 5 30 70 10 51 94 5/30 26 - 1
37 - 1 70 - 5 0779 13 75 1 31 65 10 52 - 5/30 27 - 1
38 - 1 71 - 5 14 - 1 32 70 10 60 93 2/20 28 - 1
39 - 1 72 - 5 30 83 1 33 65 10 61 94 2/20 29 - 1
40 - 1 73 - 5 35 73 10 62 - 2/20 68 - 5
41 - 1 0786 16 79 1 36 - 10 70 93 2/16 69 - 1
42 - 1 0533 00 73 3 17 - 1 39 66 1 71 94 2/16 70 - 1
43 - 1 01 - 3 18 - 1 50 61 5 72 - 2/16 71 - 1
02 - 3 51 - 10 80 93 2/16 72 - 1
73 - 1
0517 01 73 50 03 - 3 0900 00 52 - 10 81 94 2/16
02 - 50 53 66 5 82 - 2/16
03 - 50 0539 49 73 5 0919 45 73 1 54 - 10 90 93 2/12 6348 00 92 1
04 - 50 55 - 10 91 94 2/12 01 - 1
02 - 1
06 - 50 0600 00 5000 00 70 83 1 92 - 2/12
07 - 50 76 75 1 04 - 1
09 - 1 0695 56 71 1/20 5720 83 74 1 77 - 1 5758 00 93 2/12 05 - 1
20 83 1 57 - 1/20 84 - 1 78 - 1 01 94 2/12 06 - 1
22 - 1 79 73 1 85 - 1 83 74 1 02 - 2/12 07 - 1
40 72 10 80 - 10 84 - 1 08 - 1
41 - 10 81 71 1 5722 71 82 1/20 85 - 1 5759 00 93 10/100 10 - 1
52 63 5 72 - 1/20 01 94 10/100 11 - 1
15 - 1
53 - 5 0700 00 73 - 1/20 5732 72 82 1/20 02 - 10/100
54 - 5 74 - 1/20 73 82 1/20 10 93 10/100 16 - 1
55 - 5 0765 01 71 10 76 - 1/20 11 94 10/100 17 - 1
57 64 4 02 - 5 78 - 1/20 5734 28 66 20 12 - 10/100 18 - 1
58 - 4 03 66 1 79 - 1/20 29 71 20 20 93 5/50
59 - 4 04 - 1 81 - 1/20 30 - 10 21 94 5/50 6745 51 96 20/200
62 63 1 05 67 10 82 - 1/20 32 61 20 22 - 5/50 52 - 20/200
63 - 1 06 - 5 85 - 1/20 34 66 10 30 93 5/30 53 - 10/100
64 - 1 22 - 10 88 - 1/20 74 - 10 31 94 5/30 54 - 5/50
65 - 1 23 - 10 89 - 1/20 75 71 10 32 - 5/30 56 - 5/50
72 - 1 24 61 10 76 66 10 40 93 2/20 57 - 5/50
73 - 1 25 - 10 5723 22 66 10 77 - 10 41 94 2/20 58 - 5/50
74 - 1 30 71 1 24 - 10 42 - 2/20 59 - 10
75 - 1 33 67 1/10 30 70 10 5736 28 66 20 50 93 2/16 60 - 10
80 59 5 35 73 10 31 65 10 29 71 20 51 94 2/16 92 - 5/25
81 - 5 36 - 10 32 70 10 30 - 10 52 - 2/16
82 - 5 37 - 10 33 65 10 34 66 10 6890 07 96 40
83 - 5 38 - 10 35 73 10 74 - 10 5762 98 95 1/5/30 08 - 40
90 70 4 39 - 10 36 - 10 75 71 10 09 - 40
91 - 4 41 71 5 39 66 1 76 66 10 5763 08 95 1/5/30 10 - 40
92 - 4 42 - 5 50 61 5 77 - 10 18 - 1/5/30 11 - 10
93 - 4 44 66 5 51 - 10 28 - 1/20 12 - 10
94 - 4 46 67 5 52 - 10 5737 72 82 1/20 38 - 1/20 31 - 20
95 - 4 51 71 10 53 66 5 73 - 1/20 48 - 1/20 42 - 40
96 64 4 52 - 10 54 - 10 58 - 1/20
97 - 4 54 - 10 55 - 10 5744 01 82 1/20 68 - 1/5
98 - 4 55 - 10 70 83 1 51 - 1/20 88 - 1/5
61 66 10 76 75 1 98 - 1/5
0518 50 63 1 62 67 10 77 - 1 5745 01 82 1/20
51 - 1 63 - 10 78 - 1 51 - 1/20 5764 08 95 1/5
52 - 1 64 66 10
53 - 1 65 67 10 5727 71 82 1/20 5757 00 93 10/100 5765 80 93 5/30
54 - 1 66 - 10 72 - 1/20 01 94 10/100 81 94 5/30
55 - 1 73 61 10 73 - 1/20 02 - 10/100 82 - 5/30
56 - 1 76 - 10 74 - 1/20 10 93 10/100
Cat. nos. that are not bold - delivery within 4 - 8 weeks from the date of order. 03
Bold packing quantity is our mandatory packing. Orders to be placed by Legrand (India) stockists in multiples of the same.
04
LCS2
from technical room
to workstation
LCS2
LCS2 Cabling system products
Complete systems with a 20-year guarantee.
The new LCS2 cat. 6A (up to 500 MHz),
cat. 6 (up to 250 MHz) and cat. 5e (up to 100 MHz)
systems have been designed as coherent entities
to optimise their performance.
The systems are suitable for optical fibre cables as
well as copper cables.
See pages 14 to 47
Legrand Synergies
The new LCS2 systems integrate perfectly
in the various other Legrand solutions:
DLP trunking system, cabling accessories,
cable management, etc.
See pages 40 to 41
Towards network convergence.
The IP convergence products (IP telephony,
IP remote monitoring, IP access control)
can also be a part of the LCS2 systems.
05
1
LCS2 1 2 3
APPLICATION
EXAMPLE
OFFICE Area distribution box RJ 45 socket Access control
06
2
LCS2
4
3
Patch panel
07
2
LCS2 1 2
APPLICATION
EXAMPLE
MALL
CENTER DLP Trunking Cablofil
08
LCS2
3
3 4
Cabling unit Fibre optic socket
09
3
LCS2 1 2
APPLICATION
EXAMPLE
CAMPUS AVS socket DLP trunking system
10
1
LCS2
4
3 4
Wi-Fi access point RJ 45 with controlled

access
11
4
2
LCS2 1 2
APPLICATION
EXAMPLE
HOTEL RJ 45 sockets 45° Retractable RJ 45 socket
12
1
LCS2
3
3 4
Patch cord 19” wall-mounting

cabinet
13
Measurements of LCS2 components and
System guaranteed links, validated by independent laboratories
3 P Third Party Testing and ETL, have
performance of the highlighted its triple performance.
Performance of the transmission in cat. 6A,
Legrand systems performance of the installation, performance

of the maintenance.
Performance of the transmission

1 in cat. 6A
For long distance, 10 Giga guarantees only slight
signal loss for 100 m. For short distance, 10 Giga
guarantees a good echo resistance for 15 m.
Performance
2 of the installation
The values measured widely exceed the
requirements of the ISO 11801 standard, Edition 2,
amendment 2, thus providing a safety
margin to conform to the most rigorous
constraints of the installation.
Performance
3 of maintenance
Being committed to deliver a durable LCS2
system, Legrand gives a 20-year guarantee
on its performance.
Note: all LCS2 products are RoHS compliance.
COMPONENT LINK MEASUREMENT

MEASUREMENT (CHANNEL)
Category 6A STP Class EA / cat. 6A

500 MHz 250 MHz 500 MHz 250 MHz
Network protocol supported 10 Giga 1 Giga 10 Giga 1 Giga
Attenuation (dB) LCS2 0.13 0.06 35.4 24.1
Loss of signal ISO 11801 Standard, Edition 2, Amendment 2(2) 0.45 min. 0.32 max. 42.1 max. 28.9 max.
TIA/EIA-568-C.2 0.45 max. 0.32 max. 49.3 max. 33.9 max.
Return Loss (dB) LCS2 17.05 26.59 16.4 22.1

Echo resistance ISO 11801 Standard, Edition 2, Amendment 2(2) 14 min. 20 min. 8 min. 10 min.
TIA/EIA-568-C.2 14 min. 20 min. 6 min. 8 min.
Next (dB) Resistance to LCS2 37.46 56.93 38.1 54

interference between pairs(1) ISO 11801 Standard, Edition 2, Amendment 2(2) 37 min. 46 min. 29.2 min. 35.3 min.
TIA/EIA-568-C.2 34 min. 46 min. 26.1 min. 33.1 min.
ACR-N (dB)
(Alien Crosstalk Ratio) LCS2 37.33 56.87 2.7 29.9
Actual power supplied
(1) Measurements taken on the 3-6 and 4-5 pairs (2) Values taken from the draft of the ISO 11801 standard Edition 2 amendment 2
14
LCS2
0
10 ARD Edition 2
18 01 STAND
ISO 1
20
Return Loss (dB)
30
40
50 1.2
Measurement of the Return Loss
3.6 on a class EA link
60
4.5 On each pair, the performances of LCS2
70 7.8 are significantly higher than the values
required by the ISO 11801 Standard,
80 Edition 2, amendment 2.
100 200 300 400 500
Frequency (MHz)
LINK
COMPONENT MEASUREMENT MEASUREMENT
(CHANNEL)
Category 6 STP FTP UTP Class E / cat. 6
250 MHz 250 MHz 250 MHz 250 MHz
Network protocol supported 1 Giga 1 Giga 1 Giga 1 Giga
Attenuation (dB) LCS2 0.09 0.09 0.09 25.7
Loss of signal ISO 11801 Standard, Edition 2, Amendment 2 (2) 0.32 max. 0.32 max. 0.32 max. 30.7 max.
TIA/EIA-568-C.2 0.32 max. 0.32 max. 0.32 max. 35.9 max.
Return Loss (dB) LCS2 29.8 29.8 29.8 38.8

Echo resistance ISO 11801 Standard, Edition 2, Amendment 2 (2) 16 min. 16 min. 16 min. 10 min.
TIA/EIA-568-C.2 16 min. 16 min. 16 min. 8 min.
Next (dB) Resistance to LCS2 51.3 51.3 51.3 53.9

interference between pairs(1) ISO 11801 Standard, Edition 2, Amendment 2 (2) 46 min. 46 min. 46 min. 35.3 min.
TIA/EIA-568-C.2 46 min. 46 min. 46 min. 33.1 min.
ACR-N (dB)
(Alien Crosstalk Ratio) LCS2 51.21 51.21 51.21 28.2
Actual power supplied
(1) Measurements taken on the 3-6 and 4-5 pairs (2) Values taken from the draft of the ISO 11801 standard Edition 2 amendment 2
15
16
LCS2 COPPER
A complete
system up
to 10 Gbits/s
LCS2 COPPER
Connectors
See page 18 to 19
Patch panels
See page 20 to 21
Patch cords and cables

See page 22 to 23
17
18
New LCS2 The new LCS2 RJ 45 connector is
connector the core element contributing to the
performance of the LCS2 system.
Performance of You can obtain a perfect connection within a few
seconds guaranteeing an optimum performance
the installation of the link from the patch panel to the RJ 45

socket (see page 14).
LCS2 COPPER
1 2
Separate and insert

the strands
Intuitively maintain 13 mm,
no need to measure.
Insert the cable
in the rear part
Visibility of the marking as
per the EIA/TIA code.
3 4
Takes all cables currently
available on the market:
U/UTP, F/UTP and SF/UTP.
Add the upper part Turn to guarantee

of the connector the connection
The tamperproof insert gives Simply turn to flatten
ease of movement. the strands simultaneously. Cut
them, and the connector is ready!
Performance 2 ergonomic
all categories options
Thanks to the connectors - Workstation.
LCS2 cat. 6A shielded 360° 500 MHz - 10 Gbits/s. - Patch panels.
LCS2 cat. 6 shielded 360° 250 MHz - 1 Gbits/s.
LCS2 cat. 6 shielded and unshielded
250 MHz - 1 Gbits/s.
LCS2 cat. 5e shielded and unshielded.
19
20
LCS2 Patch panels The design of the new LCS2 patch
panels optimises the mounting and
Performance of maintenance.
Maintaining the cables with cable guides,
blocks of 6 RJ 45 connectors, clipping
maintenance and unclipping each connector from the
front panel.
LCS2 COPPER
Room for maintenance
Simple unclipping
of LCS2 connectors.
Better fixing by clamp
Cable maintained in its cable guide.
Panels provided with

quick-fixing system
Universal mounting
any rack or cabinets.
The new LCS2

panels can also be
fitted with:
Telephone block FC type video broadcast block LC fibre optic cassette
21
Legrand cables
and cords
coherence and To ensure total coherence of its LCS2
cat. 6A, cat. 6 and cat. 5e systems,
performance Legrand offers a range of 4 twisted pair cables
in the four types: U/UTP, F/UTP, S/FTP, SF/UTP.
High-quality manufacturing
Manufactured to high quality standards,
with thicker insulation to reduce the effects
of crosstalk, and reduction of the twist pitch of the pairs:
the quality of Legrand cables is suitable for the LCS2
category 6A, category 6 and category 5e systems,
ensuring high performance from the patch panel right
through to the RJ 45 socket. What's more, Legrand offers
its cables in 2 versions with sheaths suitable for different
environments: LSZH and PVC. The 3P laboratory
has certified all the Legrand cables to be compliant
with the ISO IS 11 801, EN 50173-1 standards
and TIA/EIA-568-C.2.
Legrand cat. 6 F/UTP cable. Legrand cat. 6 SF/UTP cable.
Legrand cat. 6A F/UTP cable.
22
LCS2 COPPER
STORAGE/TRANSPORT OPERATING
SHEATH MARKING
TEMPERATURE TEMPERATURE
CAT. 7 S/FTP LSZH in accordance with NFC 32062 LEGRAND 32777 4 pair 23 AWG S/FTP 100 ohms
with flame retardant effect in accordance LSZH CAT. 7 900 MHz - VERIFIED TO ISO 11801
CABLE with IEC 60332-1 & NFC 32070 2.1 IEC 60332-1 EN 50173 - TIA/EIA 568B - VPN/NVP .....%
0 to +50 °C -20 to +60 °C
100 OHMS Ø 7.5 mm - Colour yellow RAL 1018 Batch no. + length in metres
CAT. 6A F/UTP LSZH in accordance with NFC 32062 LEGRAND 32778 4 pair 23 AWG F/UTP 100 ohms
with flame retardant effect in accordance LSZH CAT. 6 A 500 MHz - VERIFIED TO ISO 11801
CABLE with IEC 60332-1 & NFC 32070 2.1 IEC 60332-1 EN 50173 - TIA/EIA 568B - VPN/NVP .....%
0 to +50 °C -20 to +60 °C
100 OHMS Ø 7.8 mm - Colour yellow RAL 1018 Batch no. + length in metres
CAT. 6 U/UTP PVC or LSZH in accordance with NFC 32062 LEGRAND (4 pair or 2x4 pair) 23 AWG UTP 100 ohms
with flame retardant effect in accordance 250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIED
CABLE with IEC 60332-1 & NFC 32070 2.1 TO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568A
0 to +50 °C -20 to +60 °C
100 OHMS Ø 6.4 mm - Colour blue RAL 5015 Batch no. + length in metres
CAT. 6 F/UTP PVC or LSZH in accordance with NFC 32062 LEGRAND (4 pair or 2x4 pair) 23 AWG FTP 100 ohms
with flame retardant effect in accordance with 250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIED
CABLE IEC 60332-1 & NFC 32070 2.1 Synthetic water TO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568A
0 to +50 °C -20 to +60 °C
100 OHMS repellent tape Ø 7 mm - Colour blue RAL 5015 Batch no. + length in metres
CAT. 6 SF/UTP PVC or LSZH in accordance with NFC 32062 with LEGRAND 4 pair 23 AWG SFTP 100 ohms
flame retardant effect in accordance with IEC 250 Mhz (PVC or LSZH) CAT. 6 250 MHz - EC VERIFIED
CABLE 60332-1 & NFC 32070 2.1 Synthetic water repellent TO ISO 11801 IEC 60332-1 EN 50173-1 TIA/EIA 568A
0 to +50 °C -20 to +60 °C
100 OHMS tape Ø 7.7 mm - Colour blue RAL 5015 Batch no. + length in metres
CAT. 5e U/UTP PVC or LSZH in accordance with NFC 32062 LEGRAND CAT.NO (4 pair or 2x4 pair)
with flame retardant effect in accordance 24 AWG UTP 100 ohms (PVC or LSZH) CAT. 5e EC
CABLE with IEC 60332-1 & NFC 32070 2.1 VERIFIED TO ISO 11801 IEC 60332-1 EN 50173-1 TIA/
-15 to +70 °C +5 to +40 °C
100 OHMS Ø 5.2 mm - Colour light grey RAL 7035 EIA 568A Batch no. + length in metres
CAT. 5e F/UTP PVC or LSZH in accordance with NFC 32062 LEGRAND CAT.NO (4 pair or 2x4 pair)
with flame retardant effect in accordance CAT. 5e EC VERIFIED TO ISO 11801 IEC 60332-1
CABLE with IEC 60332-1 & NFC 32070 2.1 EN 50173-1 TIA/EIA 568A
-15 to +70 °C +5 to +40 °C
100 OHMS Ø 5.5 mm - Colour light grey RAL 7035 Batch no. + length in metres
Individually tested cords

Legrand patch cords ensure high-quality continuity in a cabling system
like other components. Legrand therefore takes the same care with
the quality of its complete range of RJ 45 cords, which are certified by the
3P laboratory as compliant with the standards.
Tests on all parameters

Legrand cords are individually tested, both for continuity and
transmission performance. All the parameters are measured: CR, ACR,
NEXT, Return loss, Attenuation, etc. Cords which do not meet the criteria
are rejected. These tests guarantee transmission performance from one
end of the system to the other, with both class D and class E.
Universal cords
Available in cat. 6A, cat. 6 and cat. 5e versions and in the three
Ensure high-quality continuity:perfect
plug connection and transmission performance...
cabling types (U/UTP, F/UTP and SF/UTP). Legrand cords are available
Available in several colours. in different lengths, thus offering considerable flexibility of use.
23
24
LCS2 FIBRE OPTIC
A simple
and reliable option
LCS2 FIBRE OPTIC

Fibre optic drawers
See page 26 to 27
Connecting fibres
See page 28 to 29
25
26
LCS2 Fibre optic The new LCS2 Fibre optic drawer
drawer gives a better comfort in
installation and maintenance.
Complete accessibility Reinforcements facilitating the opening and
closing, end stop inclined at 30° for complete
and ease in coiling accessibility, coiling the fibres ensured by the

in-built coiling accessories...
LCS2 FIBRE OPTIC

19’’ Fibre optic drawer
Up to 4 fibre optic blocks can be
fitted. Equipped with grip handles.
Height: Modular 1U.
30°
Easier cable management. Total accessibility

Integrated coiling accessories. End stop, inclined at 30°.
Rear in the form of a tail
to facilitate connection of incoming
cables.
Can take all

fibre optic
connector
blocks
LC connector block. SC connector block. ST connector block.
27
Legrand solutions, including the rapid
Connecting fibres crimping connection process and
pre-fitted fibre optic links on demand
Legrand simplicity have made a significant contribution to placing fibre
optics within the reach of installers, particularly
and performance for links within buildings or between buildings,

over distances of less than two kilometres.
Connection takes just 3 minutes

1 2 with Legrand rapid connectors
The average time for making this connection
is less than 3 minutes with rapid connectors
Cat.Nos 0331 06 to 0331 13 incorporating a factory
pre-polished fibre. After the operations
to prepare the fibre, there is no longer any
need to glue or polish, or to check the quality
of the connection under a microscope!
No oven, no drying. The factory pre-polished
connectors and the crimping tool ensure that the
Split the fibre Cleave the fibre operation is simple and results in a high-quality
connection.
3 4 Tip
Consider leaving some fibres
in reserve for future development
of the installation. If you require
2 or 4 fibres now, install cables with
6 or 8, or if you require 6 to 8 fibres
now, install cables with 10 to 12.
Inspect the fibre Insert the fibre
5 6
Align the fibre Crimp the fibre
28
Pre-fitted fibre optic links on demand:
save time and cut risk to a minimum.
Pre-fitted Order your own individual solution: pre-fitted and factory tested,
it will save you time on site while ensuring a high level of link
fibre optic reliability. This minimises the risk of malfunction

during the installation, thereby simplifying the acceptance test.
LCS2 FIBRE OPTIC

What is delivered?
Each link is supplied with a test report. Length stands from connector
to connector, in metres. Links up to 50 m are conditioned in boxes
(reel optional) and those over 50 m are supplied by reel. Connectors are
protected by a sheath. Pulling ring included. Multimode 62.5/125 μm cable
complies with OM1 category, 50/125 μm with OM2 or OM3 category
and single mode with OS1 category.
How to order
1. Once your preparatory installation work is done,
determine the required length of cable.
2. Indicate the required type of fibre:
- indoor, indoor/outdoor or outdoor
- multimode 62.5/125 μm or 50/125 μm
or single mode 9/125 μm
- number of cores (4, 6, 12, 24 for indoor applications,
outdoor applications and indoor/outdoor applications)
3. Specify the type of connector: ST, SC or LC.
4. State your preferred form of delivery: box or reel.
For Technical
Assistance
Please contact us
at
(022) 3041 6258 / 00
29
30
LCS2 ENCLOSURES
AND CABINETS
Easy installation
and efficient
maintenance
LCS2 ENCLOSURES AND CABINETS

Enclosures
See page 32 to 35
Server enclosures
See page 36 to 37
Wall-mounting
cabinets
See page 38 to 39
31
4
32
19’’ LCS2 enclosures The design of the new LCS2 enclosures
Optimised facilitates managing the cables
and cords.
management of Easy association of a unit dedicated for
cords, cable entry at the top made easy, new
cables and cords feedthrough panels for perfect organisation of

patching...

Enclosures
1 Can be fully dismantled in case
of difficulty in accessing.
Base allows easier cable entry
and provides natural ventilation.
5
Maintains the bending radius
Feedthrough panels equipped
with rings to guide the cords.
2 3 4
Optimised management Linking interface Easier cable entry
of cords and cables Protects and maintains At the rear of the cabling unit or
Cable guide rack in the the bending radius in the enclosure (extendable 19’’
cabling unit and on between the enclosure entry plates with brushes).
the sides of the enclosure. and cable duct.
33
2
34
The new LCS2 enclosures can
19’’ LCS2 enclosures be very easily assembled and
dismantled.
simplified A considerable time-saving on the
sites, complete accessibility thanks
assembly to the removable side and rear panels

and a structure that can be entirely
dismantled.

1
Easy marking
Dual marking of uprights
Example: 7 U from the top,
36 U from the base. 2 3
Total accessibility Equipotential bonding

A structure that can be clamp
completely dismantled. The side and rear
panels have an automatic
equipotential bonding.
Combinations that
answer
various needs
Two 600-mm-wide enclosures Two 800-mm-wide enclosures

with a cabling unit. side by side.
35
2
36
LCS² 19”
Server enclosures The new LCS2 server enclosures are designed
Complete for complete accessibility.
Complete accessibility not only via the doors and
accessibility panels, but also thanks to the high pre-cuts and

low opening.

1
Doors and panels with keyless

lock system
- front door with handle
- perforated front and rear doors - 70% honeycomb.
2 3
Cable entry Cable ducting

- 19” High pre-cuts Support with screwless tray
- Low opening. fixing - Cablofil.
37
1
38
19’’LCS2 The new LCS2 wall-mounting cabinets can
cabinets be fitted anywhere where maintaining
aesthetic quality is very important.
Easy access, The removable side panels and flexible cable
entries (in the fixed cabinets option)
high-quality finish facilitate access for quick installation

and easy maintenance.

Total accessibility
1 Also available with pivoting body
to enable easy access to the rear.
Removable side panels
on all LCS2 cabinets.
Flexible cable entries

In DLP trunking system format.
3
High-quality finish
Curved door, screen-printed
glass.
Also available
in 10’’ version
Compact:
LCS2 cabinet for small businesses.
39
40
LCS2 WORKSTATION
The network
at your hand
LCS2 WORKSTATION
Zone distribution
boxes
See pages 42 to 43
Installation
supports
See pages 44 to 45
RJ 45 Sockets
See pages 46 to 47
Wi-Fi
See pages 48 to 49
41
42
Zone distribution
boxes of
LCS2 With the new LCS2 zone distribution
consolidate and boxes connected to the ArteorTM & MosaicTM
feedthrough sockets, the result is complete
redistribute with flexibility.
The connections close to the workstation are
complete ease centralised, copper and fibre optic are in a single

box, etc. and the LCS2 performances are guaranteed.
LCS2 WORKSTATION
Fibre optic/RJ 45 union
Copper and fibre are
placed side by side in the
same box.
Coil rack
For fibre optic.
2 blocks of 6 connectors can be fitted

to connect up to 12 RJ 45 sockets
Distribution close to the installation supports
(see next page).
LCS2 ArteorTM
& MosaicTM
feedthrough
sockets:
Quick and reliable
connection,
installation on all
RJ 45 socket with copper feedthrough for RJ 45 - RJ 45 cord. 2 x ST fibre optic feedthrough socket for optical patch cord.
supports
43
2 4
44
Installation support Network within reach.
On the wall with trunking, on the ceiling
with columns, on the ground with floor
cable management boxes and desktop multi-outlet extensions or
nearby with blocks and mini-columns.
systems They are suitable for all work space

configurations.
LCS2 WORKSTATION
1 2
Mini-columns Columns
3 4 5
Cablofil Snap-on trunking Floor boxes
End-to-end solutions:
Legrand cable management systems allow
distribution of VDI cables and power cables
from the point of entry to the workstation.
45
Arteor RJ 45 socket
with controlled access
46
Organisation
and safety
with the new
ArteorTM/ In the technical room, in a false ceiling
or in the floor boxes and desktop multi-outlet
MosaicTM extensions, it is necessary to identify the
special networks at a single glance.
LCS2 sockets Video surveillance, access control, sensitive devices, etc.
The ArteorTM/MosaicTM LCS2 sockets has coloured covers.
LCS2 WORKSTATION
Structure and protect Identify the sensitive Structure the remote-
the networks by information networks supply networks
insulating the sensitive and control their access (PoE injector) to use telephone,
applications. using a cover that can be video applications on IP, etc.
unlocked using a key.
RJ 45 Sockets
with high
standards
of Legrand
accessories
ArteorTM - Magnesium ArteorTM - White
47
48
Wi-Fi that can
be installed Wi-Fi access points can be fitted
anywhere where unrestricted access
just like to the computer network is required.
They can be fitted just like the RJ 45 sockets and on any
RJ 45 sockets supports. The stability of performance and the durability

of products are guaranteed (see page 14).
LCS2 WORKSTATION
Wi-Fi access points:
essential mobility...
- In an environment where multiple Wi-Fi networks
operate together, to optimise the available speed
everywhere in the building (in compliance with
802.11 a + b/g and 802. 11 n standards).
- In reception areas and passages, to provide network
access anywhere in the building (in compliance with the
802.11 b/g and 802. 11 n standards).
- In shared work areas, to connect a computer
permanently and provide a wireless connection
to temporary users (in compliance with the
802.11 a + b/g and 802. 11 n standards).
The Wi-Fi access points can be mounted

on any support:
Columns, mini-columns, snap-on trunking,
floor boxes, etc., wall or on Cablofil.
LCS2 PoE injector:

230 V
Power supply to DATA + POWER SUPPLY
Wi-Fi access Twisted pair
points from the cables
patch panels IN OUT
DATA + POWER SUPPLY
Data RJ 45 Connectors
(incoming switch) Patch cord Patch panel
49
50
To be introduced shortly
New LCS Pro2

software
Your LCS2 enclosure With the new LCS Pro2 software,
you can now very easily and quickly select
in a few clicks your products, view your enclosure, etc.
LCS2 SERVICES
Automatic determination Visual display of the installation
of catalogue numbers by selecting of the enclosure, modifications possible.
the features and options.
For more information

Contact local sales office
New Delhi :
(011) 2699 0028
Kolkata :
(033) 4021 3535 / 36
Mumbai :
(022) 3385 6200
Chennai :
(044) 3024 7200,
2836 4165 / 67 / 68
Hyderabad : (040) 2341 4398 / 67
Easy management of studies

Technical records, purchase
orders, document printing.
51
Structured cabling
workshop: Being in close contact with engineers at the
A top-level cutting edge of technological advances,
Legrand trainers offer you practical
training at Legrand sessions in workshops.
These are experienced people who understand your
Training Centre business and speak your language. We offer you very
useful and practical training.
Comprehensive training
- Copper installation: essential for
commercial sites
- Optical fibre: use
and testing of an installation
- Copper: use and testing
of an installation.
Training in understanding
different methods
of using an optical backbone and of
connecting and testing
the optical links, as per
the standards in force.
Training modules to help you in conversion of telephone

and computer network needs of your clients into complete and
upgradeable solutions, and cabling them as per the standards in
force.
52
The performance of an installation
Assurance must stand the test of time.
This is why Legrand guarantees the performance
of performance and the components of its LCS2 cat. 6A, cat. 6 and cat. 5e
systems over the entire channel or link for 20 years.
LCS2 SERVICES
Two guarantees to ensure
the durability of your installations Conditions of the 20-year Performance Guarantee
The 20-year performance guarantee: As with any guarantee contract, certain conditions
Legrand offers the installer the guarantee of continuity must be met in order to qualify for the Legrand 20-year
of performance levels of an LCS2 cat. 6A, LCS2 cat. 6 or LCS2 Performance Guarantee. These conditions are naturally
cat. 5e system on link or channel over time. within the capabilities of any company specialised
The 20-year components guarantee: Legrand offers the in the installation of structured cabling systems.
installer the possibility of extending the usual guarantee from The main conditions are given below (extracts from
2 years to 20 years on all products used in link or channel. the 20-year Performance Guarantee issued by Legrand).
The installer has stored the components in storage
conditions suitable for their type.
- The components guarantee of the LCS2 cat. 6A, LCS2 The installation has been built in strict compliance
cat. 6 or LCS2 cat. 5e systems: Legrand offers an extended with good practice and abiding by all the conditions
guarantee on the components of the LCS2 cat. 6A, LCS2 listed below.
cat. 6 or LCS2 cat. 5e systems. 20 years for the components of All the components used in the cabling system must
channel or link, i.e. patch panels, RJ 45 sockets, cables and be Legrand LCS2 cat. 6A, LCS2 cat. 6 or LCS2 cat. 5e
cords. Cabling Systems components.
The contractual 2 years guarantee on these products is thus All the patch cords used must be original Legrand
extended to 20 years. products.
The max. length of a cord must be 5 m.
The installation must be built in accordance
with the recommendations defined in installation
standards EN 50174, EN 55022 and UTE C 15-900
Sockets Patch panel Cables and cords in force at the time of issue of the guarantee.
Prior to the signature of the guarantee contract,
Legrand will check that the installation acceptance
- The channel performance guarantee: test data comply with the values specified
A channel is defined by the standards as being an assembly in the standard.
consisting of the following components: The installer must submit the following 4 documents
patch cord, patch panel, cable, RJ 45 socket, user to Legrand:
cord. During acceptance testing, the performance - The installation acceptance test for the link
of the channel is measured over a maximum length or the channel
of 100 m. It must remain constant over time. - The “14 key points of a high performance installation”
form, ticked and signed as agreement on its part
of having complied with the 14 points
Cables - A full list of the products installed
- An installation diagram of the patch cabinets
Patch panel
Sockets Computer and the RJ 45 sockets.
Any subsequent modifications or extensions must comply
Active product with the conditions listed above.
53
selection chart for equipment and enclosures
configure your LCS2 system
SELECT RJ 45 SOCKETS AND WI-FI ACCESS POINTS ARTEOR MOSAIC
LCS2 cat. 6A LCS2 cat. 6 LCS2 cat. 5e LCS2 cat. 6A LCS2 cat. 6 LCS2 cat. 5e
White 5734 32 5734 34 - 0765 73 0765 63 -

STP
Magnesium 5728 06 5736 34 -
White - 5723 22 5734 30

1 module FTP
Magnesium - 5728 22 5736 30
White - 5734 28 5734 29 - 0765 61 0765 51

UTP
Magnesium - 5736 28 5736 29
White - 5734 77 - 0765 76 0765 66 -

STP
Magnesium - 5736 77 -
White - 5734 76 -
2 modules FTP
Magnesium - 5736 76 -
White - 5734 74 5734 75

UTP
Magnesium - 5736 74 5736 75 - 0765 64 0765 54
2 modules with
UTP White - 0765 03 0765 01
45° incline
White 5723 50 - - 0765 99 0765 96 -

STP
2 modules with Magnesium 5728 50 - -
controlled access
White - 5723 53 -
UTP
Magnesium - 5728 53 - - 0765 94 0765 97
STP White - 0765 93 -

Sockets at 90°
UTP White - 0765 91 -
2 x RJ 45 sockets UTP White - 0765 44 0765 41
White 5723 52 - - 0765 24 - -

STP
Magnesium 5728 52 - -
Green shutter
White - 5723 55 -
FTP
Magnesium 5728 55 - - 0765 22 -
White 5723 51 - - 0765 25 - -

STP
Magnesium 5728 51 - -
Orange shutter
White - 5723 54 -
FTP
Magnesium - 5728 54 - - 0765 23 -
Copper
UTP White - 0786 22 0786 20
feedthroughs
Ethernet/Ethernet UTP 0765 38 0765 38 0765 38
Doubler sockets Telephone/Ethernet UTP 0765 36 0765 36 0765 36
Telephone/telephone 0765 35 0765 35 0765 35

With RJ 45 socket, dual-band and
0779 14 0779 14 0779 14
Manageable Wi-Fi dual-radio
access points
Dual-band and dual-radio 0779 13 0779 13 0779 13
2
SELECT LCS PANELS AND CONNECTOR UNITS
Patch panels 1U STP 0335 73 0335 63 -

Fitted with 24 connectors UTP - 0335 61 0335 51
STP 0335 76 0335 66 -

Units of 6 x RJ 45 connectors
UTP - 0335 64 0335 54
Blanking plate 0335 91 0335 91 0335 91

Patch panel 1 u
0335 90 0335 90 0335 90
To be fitted with 4 units
Cat. nos. that are not bold - delivery within 4 - 8 weeks from the date of order.
54 Bold packing quantity is our mandatory packing. Orders to be placed by Legrand (India) stockists in multiples of the same.
configure your LCS2 system (continued)
SELECT FIBRE OPTIC EQUIPMENT

Monomode Multimode
For 6 fibres 0335 13 0335 18

LC units
High density - For 12 fibres - 0335 19
SC units For 6 fibres 0335 12 0335 17
ST unit For 6 fibres - 0335 16
10/100 base T to 10/100 base SX - 0335 06

Copper/fibre optic converters
1000 base T to 1000 base SX/LX - 0335 07
Switch units 6 x RJ 45 ports + 1 LC type optic port 0335 05 0335 05
Fibre optic enclosures 1 U - For 4 fibre optic units 0335 10 0335 10
Fibre optic cassettes for patch panel 0335 11 0335 11

2
SELECT 19" LCS FEEDTHROUGH PANELS
1U 0465 22
Metal, 2 axes and quick-fixing
2U 0465 23
1U 0465 28
Plastic with brushes, snap on
2U 0465 29
1U 0465 30
Metal with brushes and quick-fixing
2U 0465 31
2
SELECT 19" LCS
5 x 2P+ T sockets + switch 6339 10

Power Supply Units
5 x 2P+ sockets + MBC 6339 11
Replacement module for

Replacement module 0775 41
surge suppressor 2 U
Modular unit 2 U Takes 16 Mosaic modules 0332 79
DIN rail kit IP 2X - 2 U For Lexic modular devices 0465 45
SELECT PATCH CORDS AND RJ 45 USERS

1m 0517 80 0517 52 -
2m 0517 81 0517 53 -
SF/UTP Impedance 100 Ohms
3m 0517 82 0517 54 -
5m 0517 83 0517 55 -
0.3 m - - 0516 91
0.6 m - - 0517 17
1m - 0517 62 0516 40
F/UTP Impedance 100 Ohms
2m - 0517 63 0516 41
3m - 0517 64 0516 42
5m - 0517 65 0516 43
1m - 0517 72 -
2m - 0517 73 -
U/UTP Impedance 100 Ohms
3m - 0517 74 -
5m - 0517 75 -
SELECT COPPER CABLES (305 OR 500 M REELS)
S/FTP 4 pairs 500 m 0327 77 - -
4 pairs 500 m - 0327 57 -
SF/UTP
2 x 4 pairs 500 m - 0328 59 -
305 m - 0328 56 0327 52
4 pairs
F/UTP 500 m 0327 78 0327 56 0328 50
2 x 4 pairs 500 m - 0327 76 0327 74
305 m - 0327 54 0327 50
4 pairs
U/UTP 500 m - 0328 61 0328 53
2 x 4 pairs 500 m - 0328 63 0328 55
Bold packing quantity is our mandatory packing. Orders to be placed by Legrand (India) stockists in multiples of the same. 55
SELECT 19" LCS2 ENCLOSURES Depth 600 mm Depth 800 mm Depth 1000 mm
24 U Width 600 mm 0463 00 - -
29 U Width 600 mm 0463 06 - -
33 U Width 600 mm 0463 12 - -
Width 600 mm 0463 18 0463 19 -
42 U
Width 800 mm 0463 21 0463 22 0463 23
47 U Width 800 mm - 0463 28 0463 29
SELECT 19" LCS2 EXTENSION ENCLOSURES Depth 600 mm Depth 800 mm
Width 600 mm 0463 30 -
42 U
Width 800 mm - 0463 33
SELECT 19" LCS2 SERVER ENCLOSURES Depth 1000 mm
Width 600 mm 0463 85
42 U
Width 800 mm 0463 86
For enclosure For enclosure For enclosure
SELECT EQUIPMENT FOR 19" LCS2 ENCLOSURES depth 600 mm depth 800 mm depth 1000 mm
42 U cabling units 0463 34 0463 35 -
Base for cabling unit, trap height 100 mm 0464 64(1) 0464 64(1) -
Joining kits 0463 37 0463 38 0463 39
Sets of 2 solid side traps for enclosure base 0464 54(2) 0464 56(2) 0464 58(2)
Ventilated traps, 1 trap height 100 mm 0464 60 0464 61 -
Traps with brushes, 1 panel height 100 mm 0464 62 0464 63 -
Stay plates 0476 93 0476 94 0476 95
Linking interface 0464 66 - -
Depth 115 mm 0465 00 0465 00 0465 00
Fixed shelves
Depth 200 mm 0465 01 0465 01 0465 01
Projecting mounting on 2 x 19" uprights
Depth 360 mm 0465 02 0465 02 0465 02
Fixed shelves. Quick mounting on 4 x 19" uprights (excludes server enclosures) 0465 05 0465 06 0465 07
Fixed shelf. Screw fixed on 4 x 19" uprights - - 0465 17
Telescopic shelves. Quick mounting on 4 x 19" uprights (excludes server enclosures) 0465 08 0465 09 0465 10
Telescopic shelf. Screw fixed on 4 x 19" uprights - - 0465 18
Set of 2 fixed runners 0465 11 0465 12 0465 13
Height 100 mm Height 200 mm
For width 600 mm 0464 50 0464 52
Enclosure base kits
For width 800 mm 0464 51 0464 53
SELECT 19" LCS2 CABLE ENTRIES FOR TOP AND BOTTOM AND For enclosures
BLANKING PLATES
1U 0465 28
Plastic cable entries with brushes, snap on
2U 0465 29
1U 0465 32
Solid plastic blanking plates, snap on
2U 0465 33
1U 0465 30
Metal cable entries with brushes and quick-fixing
2U 0465 31
1U 0465 38
Solid metal blanking plates and quick-fixing 2U 0465 39
3U 0465 40
SELECT CABLING MANAGEMENT EQUIPMENT
For enclosure width/depth 600 mm 0464 72
Sets of 3 cable management supports For enclosure width/depth 800 mm 0464 73
For enclosure depth 1000 mm 0464 74
For enclosure 33 U 0464 76
Flat cable guides
For enclosure 42 U 0464 77
Width 200 mm 0464 69
U-shaped cable guides
Width 400 mm 0464 70
Cord management grille For enclosure 42 U, width 800 mm 0331 35
Vertical feedthrough For enclosure 42 U, width 800 mm 0464 80
Patch extension For enclosure 42 U, width 800 mm 0464 81
SELECT THERMAL MANAGEMENT EQUIPMENT AND ACCESSORIES
2 fans 0464 87
19" plates 3U with 230 V fans
3 fans 0464 88
For enclosure depth 600/800 mm 0464 89
Ventilation enclosures
For enclosure depth 800/1000 mm 0464 90
Thermostat Adjustable range 5 to 60 °C 0348 48
Set of 4 casters 0464 83
Set of 4 casters for server enclosure 0464 82
Accessories 230 V Lighting kit 0464 85
Level adjustment kit 0464 84
Floor fixing kit 0464 86
(1) Double the number of traps for a height of 200 mm
(2) Order 2 sets for a base height of 200 mm (Cat.Nos 0464 52/53)
FIXED PIVOTING
SELECT 19" LCS2 CABINETS AND EQUIPMENT
Depth 400 mm Depth 580 mm Depth 600 mm
6U Height 350 mm 0462 00 - -
9U Height 500 mm 0462 01 0462 06 0462 11
12 U Height 600 mm 0462 02 0462 07 0462 12
16 U Height 800 mm 0462 03 0462 08 0462 13
21 U Height 1000 mm - 0462 09 0462 14
Depth 115 mm 0465 00 0465 00 0465 00
Fixed shelves Depth 200 mm 0465 01 0465 01 0465 01
Depth 360 mm - 0465 02 0465 02
Cable entry plate with brush - - 0462 55
230 VA fan 0462 60 0462 60 0462 60

Equipment
Thermostat 0348 48 0348 48 0348 48
Set of 4 casters - - 0462 64
OS 1 (UPC) OM 3 OM 2
SELECT FIBRE OPTIC PATCH CORDS monomode multimode multimode
9/125 μm 50/125 μm 50/125 μm
1m - - 0330 80
ST/ST duplex cords 2m - - 0330 81
3m - - 0330 82
1m 0326 00 0326 09 0330 69
SC/SC duplex cords 2m 0326 01 0326 10 0330 70
3m 0326 02 0326 11 0330 71
1m 0326 03 0326 12 0330 75
SC/LC duplex cords 2m 0326 04 0326 13 0330 63
3m 0326 05 0326 14 0330 76
2m - - 0330 72
ST/SC duplex cords
3m - - 0330 73
1m 0326 06 0326 15
LC/LC duplex cords 2m 0326 07 0326 16 0330 61
3m 0326 08 0326 17
LC/ST duplex cord 2m - - 0330 65
SELECT OPTIC CABLES (2000 M REELS)

6 fibres 0325 12 0325 10 0325 08
Internal/external, anti-rodent
12 fibres - 0325 11 0325 09
External, anti-rodent reinforced steel 6 fibres 0325 13 - -
LCS2 zone distribution boxes LCS2 cat. 6 LCS2 cat. 5e
STP 0335 46 -
Zone distribution boxes
FTP 0335 45 -
Fitted with 12 x RJ 45 connectors
UTP 0335 44 -
STP 0335 66 -
Units of 6 x RJ 45 connectors FTP 0335 65 0335 55
UTP 0335 64 0335 54
Fibre optic accessory 0335 20 0335 20
Zone distribution box
0335 40 0335 40
To be fitted with 4 units
NEW LCS PRO2 SOFTWARE >>> Legrand cabling system LCS2
category 6A
patch panels, blocks of connectors
To be introduced shortly
Your LCS2 enclosure

in a few clicks 0335 73
Select your products and visualise your

enclosure simply and quickly with the new
0335 90
LCS Pro2 software...
LCS Pro2 allows you to

automatically find Cat.Nos
by selecting characteristics 0335 76 Connector cat. 6A
options shielded STP
Pack Cat.Nos Patch panel cat. 6A

24 x RJ 45 connectors
Panel supplied with quick-fixing
All enclosures or cabinets general assembly
Panel ensures automatic grounding of each connector
Fitted with rear cable guide to hold cables during
maintenance
Fitted with 4 units of 6 LCS2 RJ 45 connectors cat. 6A
LCS Pro2 lets you visualise with fast connection thanks to integrated crimping,
the enclosure installation with 568 A/B labelling
and amend it if required Supplied with numbered colour labels
Conform to standards ISO/IEC 11801 Ed. 2.0, draft
amendment 2, EN 50173-2 and EIA/TIA 568 B2.10
19" panel - 1 U
1 0335 73 STP - Metal shielding 360°
Modular panel
Panel supplied with quick-fixing
All enclosures or cabinets general assembly
LCS Pro2 allows you to Panel ensures automatic grounding of each connector
Fitted with rear cable guide to hold cables during
easily manage your maintenance
studies: technical Modular empty panel for up to 4 units
summaries, purchase Take the following equipment:
orders, document printing - units of 6 x LCS2 RJ 45 connectors
- telephone inlet units
- fibre optic units
- PoE injector units
- video streaming units
- switch units
- telephone/Ethernet doubler units
- copper/fibre optic converter units
- blanking plates
1 0335 90 19" panel - 1 U
Units of 6 x RJ 45 connectors cat. 6A

Fitted with 6 x LCS2 RJ 45 connectors cat. 6A with
fast connection thanks to integrated crimping, with
568 A/B labelling
Supplied with colour labels
Conform to standards ISO/IEC 11801 Ed. 2.0, draft
amendment z, EN 50173-2 and
EIA/TIA 568 B2.10
2 0335 76 STP unit - metal shielding 360°
10 0335 91 Blanking plate for 19" panel - Black
Legrand cabling system LCS2 Legrand cabling system LCS2
category 6A category 6A
cables cords
0327 77 0517 82
Pack Cat.Nos Cables for local networks cat. 6A Pack Cat.Nos RJ 45 patch cords and user cords cat. 6A
Cables 4 pairs or 2 x 4 twisted pairs 100 ohms RJ 45 - RJ 45 right
LSZH sleeve: halogen-free Conform to standards ISO/IEC 11801
Yellow RAL 1018 Ed. 2.0, EN 50173-1 and EIA/TIA 568 B2.10
Colour code EIA/TIA
Conform to standards ISO/IEC 11801 PVC S/FTP shielded impedance 100 Ω
Ed. 2.0, EN 50173-1 and EIA/TIA 568 B2.10
LSZH Performance 500 MHz 5 0517 80 Length 1 m
5 0517 81 Length 2 m
F/UTP - 4 pairs 5 0517 82 Length 3 m
Performance 500 MHz 5 0517 83 Length 5 m
500 (1) 0327 78 Length 500 m
Supplied on reel. Weight 25 kg LSZH
F/UTP - 2x4 pairs
Performance 500 MHz 5 0518 70 Length 1 m
500 (1) 0328 78 Length 500 m 5 0518 71 Length 2 m
Supplied on reel. Weight 65 kg 5 0518 72 Length 3 m
S/FTP - 4 pairs 5 0518 73 Length 5 m
Performance 600 MHz
500 (1) 0327 77 Length 500 m
5 0518 67 Length 2 m
5 0518 68 Length 3 m
5 0518 69 Length 5 m
(1) in metre(s)
Legrand cabling system LCS2
LCS2 ZONE DISTRIBUTION
BOXES
>>> category 6A
zone distribution boxes
Accessory 0335 40
connection Pack Cat.Nos Zone distribution boxes

For distribution of low current in a zone fitted with 1 to
equipment
12 RJ 45 sockets
Centralise connections to guarantee flexibility and
adaptability of the installation
Installed on false ceiling or false floor
Connect to the patch panel or the floor cabinet
Connection to workstation for RJ 45 cords
Can take switch Cat.No 0335 02 or PoE injector
Complete flexibility with the new LCS2 zone Cat.No 0335 01 or 6 connector unit Cat.No 0335 76
boxes: centralisation of connections close to Conform to standards UTE C 15-900, NF C 15-100,
NF C 20-730, EN 50-174.2, CEI 60950,
the work station, coexistence of copper and ISO/IEC 11801 Ed. 2.0, EN 50173-2 and EIA/TIA 568
Colour code EIA/TIA 568 A and B
fibre optics Cords and cables: ISO 11801 id.2.0, EN 50173-1,
EIA/TIA 568
Technical characteristics:
- polycarbonate PC hood
- polypropylene PP base
- RAL 7035
- holds connector units in place on the box: 100 N
- cables anchored on support using Colring cable ties
Self-assembly zone distribution box
1 0335 40 Used for mounting LCS2 RJ 45 connector blocks
cat. 6A (p. 58), cat. 6 (p. 62) and cat. 5e (p. 68),
of fibre optic accessories or blanking plates
> Flexible installation with lines in reserve to

meet future requirements quickly
> Reliable and fast connection to the LCS2 zone

box with sockets with copper and fibre optic
feedthrough and RJ 45/RJ 45 cords
> Guaranteed performance across the whole

LCS2 system
category 6A
RJ 45 sockets
5734 32 0765 73 0765 76
0765 24 0765 25
Sockets with LCS2 connector with fast connection thanks to integrated crimping
Take AWG 22 single-core cables up to AWG 26 and AWG multicore cables
Contacts marked with dual colour code and numbers 568 A and B
Conforms to standards ISO/IEC 11801 Ed. 2.0, draft amendment 2, EN 50173-1 and EIA/TIA 568 B2.10
Pack Cat.Nos Arteor RJ 45 socket cat. 6A Pack Cat.Nos Mosaic RJ 45 sockets cat. 6A
360° metal shielding 360° metal shielding
STP - 1 module STP - 1 module
20 5734 32 White
10 0765 73 White
10 5728 06 Magnesium
10 5723 52 White with green shutter STP - 2 modules
10 5728 52 Magnesium with green shutter 10 0765 76 White
10 5723 51 White with orange shutter
10 5728 51 Magnesium with orange shutter
10 0765 24 White with green shutter
STP with controlled access - 2 modules
Supplied with 2 keys for 5 sockets
5 5723 50 White with red shutter 10 0765 25 White with orange shutter
5 5728 50 Magnesium with red shutter
Arteor Program audio/video

sockets
see p. 82
category 6
0335 62 0335 90
Connecteur cat. 6
0335 65 STP blindé
Pack Cat.Nos Patch panels cat. 6 Pack Cat.Nos Modular panels

Panels supplied with quick-fixing
Panels supplied with quick-fixing General all-purpose assembly of all enclosures
All enclosures or cabinets general assembly or cabinets
Panels ensure automatic grounding of each connector Panels ensure automatic earthing of each connector
Fitted with rear cable guide to hold cables during Fitted with rear cable guide to hold cables during
maintenance maintenance Empty panels to be fitted with 4 units
Fitted with 4 units of 6 LCS2 RJ 45 connectors cat. 6 Take the following equipment:
connection with 110 tool, with 568 A/B labelling - 6 LCS2 RJ 45 connector units
Supplied with colour labels numbered from 1 to 24 - telephone inlet units
Conform to standards ISO/IEC 11801 - fibre optic units
Ed. 2.0, EN 50173-2 and EIA/TIA 568 - PoE injector units
19" 1 U panels - video streaming units
1 0335 61 UTP panel - 8 contacts - switch units
1 0335 62 FTP panel - 9 contacts - telephone/Ethernet doubler units
1 0335 63 STP panel - metal shielding 360° - copper/fibre optic converter units
UTP through panel - blanking plates
1 0335 90 19" panel - 1 U
1 0335 89 UTP through panel
Units of 6 x RJ 45 connectors cat. 6
Fitted with 6 x LCS2 RJ 45 connectors cat. 6 with fast
connection thanks to integrated crimping, with 568
A/B labelling
Conform to standards ISO/IEC 11801
Ed. 2.0, EN 50173-1 and EIA/TIA 568
2 0335 64 UTP unit - 8 contacts
2 0335 65 FTP unit - 9 contacts
2 0335 66 STP unit - metal shielding 360°
category 6 category 6
cables cords
0327 54 0517 62
Pack Cat.Nos Cables for local networks cat. 6 Pack Cat.Nos RJ 45 patch cords and user cords
cat. 6
Cables 4 pairs or 2 x 4 twisted pairs
100 ohms RJ 45 - RJ 45 right
Blue RAL 5015
Colour code EIA/TIA PVC U/UTP unscreened impedance 100 Ω
Conform to standards ISO/IEC 11801
Ed. 2.0, EN 50173-1 and EIA/TIA 568 B2.10 1 0517 72 Length 1 m
LSZH PVC U/UTP - 4 pairs 1 0517 73 Length 2 m
305 (1) 0327 54 Length 305 m 1 0517 74 Length 3 m
Supplied in cardboard box. Weight 16 kg 1 0517 75 Length 5 m
500 (1) 0328 61 Length 500 m
LSZH
Supplied on reel. Weight 18 kg
1000 (1) 0328 71 Length 1000 m
Supplied on reel 1 0518 62 0518 58 Length 1 m
305 (1) 0327 55 Length 305m 1
Supplied in cardboard box. Weight 13 kg 0518 63 0518 59 Length 2 m
1 0518 64 0518 60 Length 3 m
500 (1) 0328 62 Length 500 m
Supplied on reel. Weight 19 kg 1 0518 65 0518 61 Length 5 m
1000 (1)
0328 72 Length 1000 m
Supplied on reel PVC F/UTP screened impedance 100 Ω
U/UTP - 2 x 4 pairs
500 (1) 0328 63 Length 500 m 1 0517 62 Length 1 m
F/UTP - 4 pairs 1 0517 64 Length 3 m
305 (1) Length 305 m 1 0517 65 Length 5 m
0328 56
Supplied on reel. Weight 17 kg LSZH
500 (1)
0327 56 Length 500 m
1 0518 54 0518 50 Length 1 m
F/UTP - 4 pairs 1 0518 55 0518 51 Length 2 m
305 (1)
0328 57 Length 305 m 1
Supplied in cardboard box. Weight 17 kg 0518 56 0518 52 Length 3 m
1 0518 57 0518 53 Length 5 m
500 (1) 0327 58 Length 500 m
PVC SF/UTP shielded impedance 100 Ω
F/UTP - 2 x 4 pairs
500 (1) 0327 76 Length 500 m
500 (1) 0328 58 Length 500 m 5 0517 53 Length 2 m
SF/UTP - 4 pairs 5 0517 55 Length 5 m
500 (1) 0327 57 Length 500 m
500 (1) 0327 59 Length 500 m
SF/UTP - 2 x 4 pairs
500 (1) 0328 59 Length 500 m
(1) in metre(s)
zone distribution boxes cords specifically for zone distribution boxes
0335 46
0517 57
0335 40
RJ 45 RJ 45
Connection principle
Pack Cat.Nos Cords cat. 6 - RJ 45/stripped AWG 24

0335 40 fitted with SC fibre optic unit, accessory 0335 20 accessory
Cat.No 0335 20 and a 6 x RJ 45 connector unit fibre optics
RJ 45 - straight stripped
Clip on and off in the zone distribution boxes
Pack Cat.Nos Zone distribution boxes and connection via LCS2 connector
of an RJ 45 socket by the stripped side
For distribution of low current in a zone fitted with 1 to Cords prepared in factory, "ready for wiring".
12 RJ 45 sockets Centralise connections to guarantee Conform to standards ISO/IEC 11801
flexibility and adaptability of the installation Ed. 2.0, EN 50173-1 and EIA/TIA 568
Installed on false ceiling or false floor Blue RAL 5015
Connect to the patch panel or the floor cabinet
Connection to an RJ 45 socket with stripped cord U/UTP unscreened impedance 100 Ω
4 0517 57 Length 8 m
or to a Arteor or Mosaic RJ 45 socket with copper
4 0517 58 Length 15 m
feedthrough with an RJ 45/RJ 45 cord
4 0517 59 Length 20 m
IP 21 - IK 07
Conform to standards UTE C 15-900, NF C 15-100,
NF C 20-730, EN 50-174.2, CEI 60950, F/UTP screened impedance 100 Ω
4 0517 96 Length 8 m
ISO/IEC 11801 Ed. 2.0, EN 50173-2 and EIA/TIA 568
4 0517 97 Length 15 m
4 0517 98 Length 20 m
Cords and cables: ISO 11801 id.2.0, EN 50173-1,
EIA/TIA 568
- polycarbonate PC hood Cords cat. 6 - RJ 45/RJ 45
- polypropylene PP base For direct connection via RJ 45 male plug to the
- RAL 7035 zone distribution box and to the RJ 45 socket with
- holds connector units in place on the box: 100 N copper feedthrough to ensure:
- Cables anchored on support using Colring cable ties - safe connection
Zone distribution boxes cat. 6 - speed and reliability of connection
Fitted with 2 x 6 LCS2 connector blocks Blue RAL 5015
RJ 45 cat. 6 and RJ 45 blanking plates U/UTP unscreened impedance 100 Ω
Supplied with Colring cable ties 4 0515 10 Length 8 m
1 0335 44 UTP 4 0515 11 Length 15 m
1 0335 45 FTP 4 0515 12 Length 20 m
1 0335 46 STP
Self-assembly zone distribution box F/UTP screened impedance 100 Ω
1 4 0515 13 Length 8 m
0335 40 Used for mounting LCS2 RJ 45 connector blocks 4 0515 14 Length 15 m
cat. 6 (p. 62) 4 0515 15 Length 20 m
feedthrough sockets 110 Cross Connect System blocks and patch cords cat. 6
6339 70
5723 31
Pack Cat.Nos Sockets with copper feedthrough cat. 6

Easy connection at the rear through simply attaching
a male plug
Ensures network access for the RJ 45 socket
Used to create links cat. 6
According to standards ISO 11801 Ed.2, EN 50173-1
and EIA/TIA 568 within the framework of operation
with zone distribution boxes 6339 72
Multidirectional cord entry
Installation possible in all supports with min. 40 mm
depth
2 modules 6339 29
Arteor
Cat. 6 UTP Arteor
10 5723 31 White
Cat. 6 FTP Arteor

10 5723 33 White
6339 73
Pack Cat.Nos Block kits

sBLOCKCONNECTION
s#CONNECTINGBLOCKS
sINCLUDESBASEWIRINGBLOCK
sLABELHOLDERSFORDESIGNATION
With legs
1 6339 24 48-pair in 50-pair footprint
Without legs
Patch cords
110/110 - 4 pairs
10 6339 12 Length 1 m
10 6339 13 Length 1.5 m
10 6339 14 Length 3 m
110/RJ 45 - 4 pairs
10 6339 15 Length 1 m
10 6339 16 Length 1.5 m
10 6339 17 Length 3 m
Accessories
110 tool
1 0332 60 110 tool
1 0332 61 Replacement blade
Designation labelling Kits
5 6339 68 Pack of two clear strips and white paper
Rivets
1 6339 71 Rivets (pack of 12)
110 jumper troughs
1 6339 69 With legs, 27.3 x 6.83 x 11.9 mm
1 6339 70 Without legs, 21.6 x 6.83 x 6.83 mm
19" enclosure mount 110 panel
1 6339 72 Panel for 2 x 100-pair blocks without legs, 2 U
1 6339 73 Panel for 2 x 100-pair blocks and two troughs without
legs, 4 U
category 6
RJ 45 sockets
5736 76 5736 28 0765 64
Contacts marked with dual colour code and numbers 568 A and B. Conforming to standards ISO/IEC 11801 Ed. 2.0, EN 50173-1 and EIA/TIA 568
Pack Cat.Nos Arteor RJ 45 socket cat. 6 Pack Cat.Nos Prises RJ 45 Mosaic cat. 6
UTP - 1 module UTP - 1 module
20 5734 28 White 10 0765 61 White
UTP - 2 modules UTP - 2 modules

10 5734 74 White 10 0765 64 White
UTP - 2 modules - round UTP with controlled access - 2 modules

10 5723 24 White Supplied with 2 keys for 5 sockets
10 5728 24 Magnesium 5 0765 94 White with red shutter
UTP with controlled access - 2 modules

Supplied with 2 keys for 5 sockets UTP 90° - 2 modules
5 5723 53 White with red shutter Vertical snap-on socket for column module
5 5728 53 Magnesium with red shutter 10 0765 91 White
UTP retractable RJ 45 sockets - 4 modules

With integrated retractable cord (0.9 m) UTP 45° - 2 modules
Winds up automatically with a pushbutton 1 0765 03 White
1 5723 39 White
1 5728 39 Magnesium
UTP 45° - 2 x RJ 45 - 2 modules
1 0765 04 White
FTP - 1 module
10 5723 22 White UTP 2 x RJ 45 with Soluclip accessory - 3 modules
10 5728 22 Magnesium For snap-on mounting on DLP trunking with 45 mm
10 5723 54 White with orange shutter cover
10 5728 54 Magnesium with orange shutter 5 0765 44 White
10 5728 55 Magnesium with green shutter
FTP - 2 modules
10 5734 76 White
Shielded STP - 1 module

10 5734 34 White
Shielded STP - 2 modules

10 5734 77 White
category 6
RJ 45 sockets
0765 63 0765 96 0765 33 + cover plate 6745 54
Contacts marked with dual colour code and numbers 568 A and B. Conforming to standards ISO/IEC 11801 Ed. 2.0, EN 50173-1 and EIA/TIA 568
Pack Cat.Nos Mosaic RJ 45 sockets cat. 6 (continued) Pack Cat.Nos Mosaic RJ 45 sockets cat. 6 (continued)
FTP - 1 module FTP retractable RJ 45 sockets - 4 modules
10 0765 62 White With integrated retractable cord (0.9 m)
Winds up automatically with a pushbutton
1/10 0765 33 White
FTP - 2 modules
10 0765 65 White
10 0765 23 White with orange shutter
FTP 2 x RJ 45 with Soluclip accessory - 3 modules FTP 90° - 2 modules
For snap-on mounting on trunking with 45 mm cover Vertical snap-on socket for column module
5 0765 46 White 10 0765 92 White
Shielded STP - 1 module

FTP with controlled access - 2 modules 10 0765 63 White
5 0765 95 White with red shutter
Shielded STP - 2 modules
10 0765 66 White
FTP 45° - 2 modules
10 0765 05 White
Shielded STP with controlled access - 2 modules
FTP 2 x RJ 45 45° - 2 modules 5 0765 96 White with red shutter
5 0765 06 White
Shielded STP 90° - 2 modules

Vertical snap-on socket for column module
10 0765 93 White
category 5e
0335 52 0335 90
0335 55 Connecteur cat. 5e FTP
Pack Cat.Nos Patch panels cat. 5e Pack Cat.Nos Modular panels

Panels supplied with quick mounting Panels supplied with fast assembly
All enclosures or cabinets general assembly All enclosures or cabinets general assembly
Panels ensure automatic grounding of each connector Panels ensure automatic grounding of each
Fitted with rear cable guide to hold cables during connector
maintenance Fitted with rear cable guide to hold cables during
Fitted with 4 units of 6 LCS2 RJ 45 connectors cat 5e maintenance
with fast connection thanks to integrated crimping, Modular empty panels for up to 4 units Takes the
with 568 A/B labelling following equipment:
Supplied with colour labels numbered from 1 to 24 - units of 6 LCS2 RJ 45 connectors
Conform to standards ISO/IEC 11801 - units for telephone inlets
Ed. 2.0, EN 50173-1 and EIA/TIA 568 - fibre optic units
19" panel - 1 U - PoE injector units
UTP panel - switch units
1 0335 51 UTP panel - 8 contacts - telephone/Ethernet doubler units
- copper/fibre optic converter units
FTP panel - blanking plates
1 0335 52 FTP panel - 9 contacts 1 0335 90 19" panel - 1 U
UTP through panel
24 RJ 45 connectors
1 0335 88 UTP through panel Units of 6 x RJ 45 connectors cat. 5e
Fitted with 6 x LCS2 RJ 45
connectors cat. 5e with fast connection thanks to
integrated crimping, with 568 A/B labelling
Conforms to standards ISO/IEC 11801
Ed. 2.0,
EN 50173-1 and EIA/TIA 568
2 0335 54 UTP unit
2 0335 55 FTP unit
category 5e category 5e
cables cords
0328 50 0516 40
Pack Cat.Nos Cables for local networks cat. 5e Pack Cat.Nos RJ 45 patch cords and user cords cat. 5e
4 twisted pair cables 100 ohms RJ 45 - RJ 45 right
LSZH sleeve: non-halogen
Grey RAL 7035 PVC U/UTP unscreened impedance 100 Ω
Colour code EIA/TIA Grey
LSZH PVC U/UTP - 4 pairs 1 0516 36 Length 1m
305 (1) 0327 50 Length 305m 1 0516 37 Length 2m
Supplied in cardboard box. Weight 10 kg 1
500 (1) 0328 53 Length 500 m 0516 38 Length 3m
Supplied on reel. Weight 15 kg 1 0516 39 Length 5m
1000 (1)
0328 73 Length 1000 m F/UTP screened impedance 100 Ω
Supplied on reel Grey
305 (1)
0327 51 Length 305m
500 (1)
0328 54 Length 500 m 1 0516 41 Length 2 m
1000 (1) 0328 74 Length 1000 m 1 0516 43 Length 5 m
Supplied on reel
U/UTP - 2x4 pairs
500 (1) 0328 55 Length 500 m
500 (1)
0327 73 Length 500 m
Supplied on reel
F/UTP - 4 pairs
305 (1) 0327 52 Length 305 m
Supplied in cardboard box. Weight 12 kg
500 (1) 0328 50 Length 500 m
305 (1) 0327 53 Length 305 m
Supplied by box. Weight 11 kg
500 (1) 0328 51 Length 500 m
F/UTP - 2x4 pairs
500 (1) 0327 74 Length 500 m
500 (1) 0328 52 Length 500 m
(1) in metre(s)
category 5e category 5e
zone distribution boxes cords specifically for zone distribution boxes
feedthrough sockets
0335 40
0515 03
RJ 45
RJ 45
0335 40 fitted with SC fibre optic unit, accessory
Cat. No. 0335 20 and a 6 x RJ 45 connector unit
Connection principle
Pack Cat.Nos Zone distribution boxes Pack Cat.Nos Cords cat. 5e - RJ 45 / stripped
For distribution of low current in a zone fitted with RJ 45 - straight stripped. Clip on and off in the zone
1 to 12 RJ 45 sockets Centralise connections distribution boxes and RJ 45 socket connection
to guarantee flexibility and adaptability of the via LCS2 connector via the stripped side. Cords
installation prepared in factory, "ready for wiring". Conforms to
Installed on false ceiling or false floor standards ISO/IEC 11801 Ed. 2.0, EN 50173-1 and
Connect to the patch panel or the floor cabinet EIA/TIA 568. Grey RAL 7035
Connection to an RJ 45 socket with stripped cord or
(see p.64) to a Arteor or Mosaic RJ 45 socket with U/UTP unscreened impedance 100 Ω
4 0517 90 Length 8 m
copper feedthrough with an RJ 45/RJ 45 cord
4 0517 91 Length 15 m
IP 21 - IK 07
4 0517 92 Length 20 m
Conform to standards UTE C 15-900, NF C 15-100,
NF C 20-730, EN 50-174.2, CEI 60950, ISO/IEC F/UTP screened impedance 100 Ω
11801 Ed. 2.0, EN 50173-2 and EIA/TIA 568 4 0517 93 Length 8 m
Colour code EIA/TIA 568 A and B 4 0517 94 Length 15 m
Cords and cables: ISO 11801 id.2.0, EN 50173-1, 4 0517 95 Length 20 m
EIA/TIA 568
Technical characteristics: Cords cat. 5e - RJ 45/RJ 45
- polycarbonate PC hood
- polypropylene PP base For direct connection via RJ 45 male plug to the
- RAL 7035 zone distribution box and to the RJ 45 socket with
- holds connector units in place on the box: 100 N copper feedthrough to ensure:
- Cables anchored on support using Colring cable - safe connection
ties - speed and reliability of connection
Grey RAL 7035
Self-assembly zone distribution box
1 0335 40 Used for mounting LCS2 RJ 45 connector blocks U/UTP unscreened impedance 100 Ω
cat. 5e (p. 68) 4 0515 00 Length 8 m
4 0515 01 Length 15 m
4 0515 02 Length 20 m
F/UTP unscreened impedance 100 Ω
4 0515 03 Length 8 m
4 0515 04 Length 15 m
4 0515 05 Length 20 m
Sockets with copper feedthrough cat. 5e
Easy connection at the rear through simply attaching
a male plug. Ensures network access for the RJ 45
socket. Used to create cat. 5e links. According to
standards ISO 11801 Ed.2, EN 50173-1 and
EIA/TIA 568 within the framework of operation with
zone distribution boxes. Multidirectional cord entry.
Installation possible in all supports with a min.
40 mm depth. 2 modules
Cat. 5e UTP
Arteor
10 5723 30 White
Cat. 5e FTP
Arteor
10 5723 32 White
category 5e
RJ 45 sockets
5734 75 0765 52 0695 57
Take AWG 22 single-core cables up to AWG 26 and AWG 26 multicore cables
Contacts marked with dual colour code and numbers 568 A and B
Side cable inlet for easy installation in all supports
Conforms to standards ISO/IEC 11801 Ed. 2.0, EN 50173-1 and EIA/TIA 568
Pack Cat.Nos Arteor RJ 45 socket cat. 5e Pack Cat.Nos Mosaic RJ 45 sockets cat. 5e
UTP - 1 module UTP - 1 module
20 5734 29 White 10 0765 51 White
UTP - 2 modules UTP - 2 modules
10 5734 75 White 10 0765 54 White
FTP - 1 module UTP with controlled access - 2 modules

10 5734 30 White Supplied with 2 keys for 5 sockets
10 5736 30 5 0765 97 White with red shutter
Magnesium
UTP - 2 x RJ 45 with Soluclip accessory - 3 modules
For snap-on mounting on DLP trunking with 45 mm
cover
5 0765 41 White
UTP retractable RJ 45 socket - 4 modules
With integrated retractable cord (0.9m)
Winds up automatically with a pushbutton
1 0765 30 White
UTP 45° - 2 modules
10 0765 01 White
2 x RJ 45 UTP 45° - 2 modules
5 0765 02 White
FTP - 1 module
10 0765 52 White
FTP - 2 modules
10 0765 55 White
FTP - 2 x RJ 45 with Soluclip accessory - 3 modules

For snap-on mounting on Mosaic trunking with
45 mm cover
5 0765 42 White
Plexo RJ 45 sockets, cat. 5e -

IP 55 closed flap IK 07
Protection against water, dust
For industrial sites
1/20 0695 57 FTP socket
Grey/White
1/20 0695 56 UTP socket
Grey/White
1 0695 81 Adapter for RJ 45 socket
Ensures weatherproofing (IP 44)
with the plug inserted
Grey/White
Arteor audio/video sockets
Arteor sockets with copper feedthrough
(p. 70)
see p. 82
LCS2 system additional products cat. 6A, LCS2 cat. 6, LCS2 cat. 5e
0335 39 0335 34 0335 12 0335 16
0335 02 0332 93 0335 01 0327 37
Pack Cat.Nos Modular panels Pack Cat.Nos Blanking plates

Panels supplied with captive screws and cage nuts Set of 12 blanking plugs for RJ 45 LCS2 connector
or with fast fixing 10 0517 40 White
Universal mounting for all enclosures or cabinets 10 0517 41 Black
Panels ensure automatic earthing of each connector Blanking plate for 19" panel
Fitted with rear cable guide to hold cables in place 10 0335 91 Black
during maintenance
Modular empty panels for up to 4 units
Take the following equipment: Ethernet switches 100 Mbps
- units of 6 x LCS2 RJ 45 connectors Mounted in the patch panel
- units for telephone inlets Conform with standards IEEE 802-3,
- fibre optic units EN 500 81-1 and EN 500 82-1 (Conformity with EMC
- PoE injector units requirements)
- switch units Switch units for patch panel
- telephone/Ethernet doubler units
- copper/fibre optic converter units Clip directly onto the patch panels
- blanking plates 1 0335 02 7 RJ 45 ports at the front, 1 of which is a cascade
1 0335 90 19" panel - 1 U port
Power supply with transformer provided
1 0335 05 6 RJ 45 ports + 1 LC type optic port with front-
Doubler units mounted cascade 100 base FX type LC
Power supply via transformer provided
Units of 6 x LCS2 RJ 45 doubler connectors for fast
tool-free connection Boxes to be installed on shelf
Used with doubler sockets (p. 73) 1 0332 93 5 RJ 45 port switch
2 0335 54 UTP unit Power supply via transformer provided
2 0335 55 FTP unit Dimensions : 116 x 70 x 25
10 1 0332 91 8 RJ 45 port switch
0335 91 Blanking plate for 19" panel - Black
Ethernet/Ethernet doublers 100 base T Dimensions : 171 x 98 x 29
1 0335 39 FTP - 9 contacts
1 0335 38 UTP - 8 contacts Mini shelf
1 0332 81 For switch Cat.Nos 0332 91/93
Telephone/Ethernet doublers 100 base T Dimensions: 220 x 220 x 43 mm
1 0335 37 FTP - 9 contacts For horizontal, vertical or projecting mounting of the
1 0335 36 UTP - 8 contacts switch
Telephone/telephone doubler Supplied with system for retaining the live product
1 0335 35 45 contacts
Copper/fibre optic converter units
Video streaming unit Simply and quickly permit copper to fibre conversion
1 0335 34 Block of 6 "F" connectors for video circuits and vice versa
Clip directly onto the patch panels
Fitted with an SC type fibre optic connector
Fibre optic units 1 0335 06 10/100 base T to 10/100 base FX type SC
1 0335 07 1000 base T to 1000 base SX type SC
Clip directly onto optic enclosure
Cat.No 0335 10 (p. 78), on the patch panels with
fibre optic cassette Cat.No 0335 11 (p. 78) or in the Midspan Power over Ethernet (PoE)
zone distribution boxes with fibre optic accessory injectors
Cat.No 0335 20 (p. 80) 1 0335 01 4 inlets/outlets
Monomode fibre units (9/125 μm) Used for supplying 4 Wi-Fi access points
1 0335 13 LC unit for 6 monomode fibres Clips directly onto a patch panel
1 0335 12 SC unit for 6 monomode fibres 1 0327 37 1 inlet / outlet
Used for supplying a Wi-Fi access point
Multimode fibre units (62.5 and 50/125 μm) Direct connection to the patch panel
1 0335 16 ST unit for 6 multimode fibres
1 0335 17 SC unit for 6 multimode fibres
1 0335 18 LC unit for 6 multimode fibres
1 0335 19 High-density LC unit for 12 multimode fibres
doubler sockets and accessories
tion
Protec rced
reinfo
5723 36 5728 35 0539 49 0533 00 in position 0533 01 0517 09

(no cord supplied)
Pack Cat.Nos RJ 45 doubler sockets Pack Cat.Nos Cable protection accessories

ArteorTelephone/Ethernet Plastic material
10 5723 36 FTP - 9 contacts IP 66/67 guaranteed connection with the pair 0533 02
White IP 55 with no connection for base with shutter
10 5728 36 FTP - 9 contacts Protection for RJ 45 shielded or unshielded cables
Magnesium ensuring a link of category 5
Conform to standards of the IEC 60603-7 series and
Mosaic
10
to standard IEC 61076-3-106 (version 5)
0765 37 FTP - 9 contacts Compatible with products on the market
Compatible with products on the market conforming
Arteor to the standards listed
10 5723 35 UTP - 8 contacts
White Plug
3 0533 00 Integrated PE with sealing ring and clamping blades
10 5728 35 UTP - 8 contacts
Magnesium Tool-free assembly
Ability to protect cables of category 5, 6 and 10 Gb
Mosaic
10 0765 36 UTP - 8 contacts Flush-mounting base
3 0533 01 Locking base
Supplied with RJ 45 female / female coupler cat. 5
Mosaic Ethernet/Ethernet Kit
10 0765 39 FTP - 9 contacts
10 0765 38 UTP - 8 contacts 3 0533 02 Flush-mounting base + plug
Mosaic Telephone/telephone Protective flap
10 0765 35 45 contacts 3 0533 03 Fits on base Cat.No 0533 01
RJ plugs for round cables

Mobile doublers Gold coated contacts 1.2 μm
Clip into RJ 45 sockets to double applications RJ 11
10 0327 83 TV/computer network or telephone double 50 0517 01 4 contacts, width 9.65 mm
connector RJ 12
10 50 0517 02 6 contacts, width 9.65 mm
0327 47 Telephone/telephone doubler
RJ 45 cat. 5e
50 0517 03 8 contacts, width 11.70 mm
10 0327 45 Computer network/telephone doubler 50 0517 04 9 contacts, width 11.70 mm
RJ 45 sleeves
10 0327 46 L1/L2 telephone doubler 50 0517 06 Black
50 0517 07 White
10 0327 48 Computer network/computer network double
connector
Stripping tool
Slits the sheath and releases the conductors by
Weatherproof adaptors rotation
For twisted pair cables
IP 55 - IK 07 Does not damage the conductors
Allows all functions to be adapted
Grey/White 2 Mosaic modules IP 55 operation Stripper
10 0695 80 Adapter with smoked flap 1 0332 62 For twisted pair and fibre optic cable
1 0695 79 Adapter with smoked flap lockable by special tool Cutting pliers
1 0695 81 Adapter for RJ socket ensuring IP 44 waterproofness 1 0327 60 Cuts wires cleanly without damaging the copper
cable already connected
1 0919 45 Locking tool (used for changing vandal-proof
screws) Crimping tool for RJ 45 plugs
Soliroc adapter Used for crimping plugs
Used for adapting all functions RJ 4/6/8/9 contacts
2 Mosaic modules Ratchet control of crimping
IK 10 - IP 55 mechanism
1 0778 80 Adapter with flap Able to cut and strip cables
1 0778 81 Adapter without flap 1 0517 09 Tool with 3 crimping points
Hypra adapter High resistance steel material
5 0539 49 IP 55 adapter base
110 tool
1 0332 60 110 tool
1 0332 61 Replacement blade
telephone panels, units and cables Wi-Fi
switches, distributors and Wi-Fi access points
5720 83
0335 79
0332 80
Technical characteristics (p. 105)
Pack Cat.Nos Patch panel telephone 50 ports 110 connect Pack Cat.Nos Flush-mounting 10/100 base T switches
1 0335 79 19" panel - 1 U For networking computer peripherals without a patch
panel: computers, printers, servers, etc.
Possibility of extending an existing network by
Cables for telephone networks cat. 3 simply replacing an RJ 45 socket
PVC sleeve Tool-free connection
Colour white Conform with standards IEEE 802.3 (Ethernet) and
Colour code EIA/TIA EN 500 81/82-2 (EMC requirements)
Installation in all supports with minimum 40 mm depth
U/UTP - 50 pairs 6 ports at the front + 1 side RJ 45 connector for
1 0328 91 Length 500m cabling and carrying out link tests
Supplied on reel Port status display integrated into the RJ 45 connectors
U/UTP - 100 pairs Labelling of each port from 1 to 6 and marker holder
1 0328 88 Length 500m for switch identification
Supplied on reel 6 modules
Arteor Non-manageable
Panels and units for incoming telephone 1 5720 84 PoE power supply (Power over Ethernet -
standard 802.3 af)
Panels assembled - 1 U White
Fitted with 4 LCS2 RJ 45 1 5728 84 PoE power supply (Power over Ethernet -
units of 12 ports with fast tool-free connection standard 802.3 af)
1 0335 31 3-6/4-5 contacts for digital telephone Magnesium
1 0335 30 4-5/7-8 contacts for analogue telephone 1 5720 83 230 VA power supply
White
Incoming telephone units for self-assembly
1 5728 83 230 VA power supply
panels
Fitted with 12 LCS2 RJ 45 ports with fast tool-free Magnesium
connection Arteor Manageable
2 0335 33 3-6/4-5 contacts for digital telephone 1 5720 85 230 VA power supply
2 0335 32 4-5/7-8 contacts for analogue telephone White
1 5728 85 230 VA power supply
Magnesium
Mosaic VDI distribution block without

connectors
1 0332 80 16 modules
Dimensions: 135 x 223 x 57 mm
For small patch panel
For mounting a Mosaic switch
Cat.Nos 0779 00/01/20
RJ 45 Patch cords and user cords cat. 6

(p. 63)
rdon
Wi-Fi
<<< LCS WI-FI ACCESS POINTS 2
switches, distributors and Wi-Fi access points (continued)
Optimised
installation of
Pack Cat.Nos
5723 76
Manageable Wi-Fi access points 802.11a & b/g

0779 13
Wi-Fi access
points
Dual-band and dual-radio.
Conform with standards 802.11a and 802.11b/g
Gross speed: 54 Mbps max. on each frequency
(802.11a and 802.11g) simultaneously
Can be installed in addition to a new or existing
LCS/LCS2 structured wiring system to meet mobile Wi-Fi performance is linked closely to its
working requirements
Can be integrated into all compatible supports installation. It is the key for success in
with minimum 40 mm depth
Tool-free network connection via RJ 45 connector guaranteeing good connectivity for each user
PoE power supply (Power over Ethernet - standard
802.3 af) for each application.
The installation must include at least:
- Wi-Fi access point
- a PoE injector conforming with 802.3 af (LCS2 unit
format) to be installed in the patch panel
The management function allows the network
administrator to manage Wi-Fi access points
remotely via a web interface
Security via WPA2 encryption (802.11i) and 802.1x
authentication
Guest access: allows visitors free access to the
Internet (access independent of the main Wi-Fi
Arteor network). 4 modules
1 5723 76 With RJ 45 socket on front
White
Magnesium
1 5723 77 With no RJ 45 socket
White
Magnesium
Standard 802.11 only
White
Standard 802.11 only
Magnesium
Mosaic
White
White
Manageable Wi-Fi access points 802.11n

1 0335 21 Wi-Fi ceiling mounted access point 802.11n
1 0335 22 Wi-Fi surface mounted access point 802.11n
Wi-Fi network management system KEY ELEMENTS FOR DETERMINING THE

Controller 5APs INSTALLATION AND SIZING OF A WI-FI NETWORK
1 0335 25 Controller 5APs
Features of the building : types of walls, surface,
Extension licence
Ability to control up to 25 APs coverage area, environment, etc.
(for more than 25 APs please contact Legrand)
Card that adds to the controller Cat.No 0335 25 Wi-Fi network usages: telephone and office
1 0335 26 Up to 10 AP information systems, public access, hot spots, etc.,
1 0335 27 Up to 25 AP
Access point manager (disembeded) directly determine connection speed
Aps centralised configuration software Number of users in each room : capacity in terms
1 0335 24 Access point manager
of who can connect to the Wi-Fi network.
Midspan Power over Ethernet (PoE) injectors
1 0335 01 4 inlets/outlets
Used for supplying 4 Wi-Fi access points
Clips directly onto a patch panel
THE LEGRAND WI-FI SYSTEM OFFER
>
1 0327 37 1 inlet / outlet

Used for supplying a Wi-Fi access point
Direct connection to the patch panel
The offer is based on quick and intuitive installation and settings.
Legrand's sales teams will help you with your projects.
Legrand cabling system LCS2 customised
fibre optic fibre optic links
fibre cables
FIBRES PRE-FITTED WITH CONNECTORS

0325 15 Length of link
(from connector to connector in metres) Connectors:
Link supplied with protective sleeve
and compression gland pull system to LC
facilitate entry into the optic enclosures
0325 06 SC
Number of
fibres: ST
0325 10 4, 6, 12
0325 08
Fibre cables:
I fibre colour code: FOTAG
I standard: EN 50173-2, ISO IEC 11801
Pack Cat.Nos OS 1 singlemode optical cables
(9/125 μm)
For 9/125 μm singlemode installations Fibre type
900 μm (OS 1) Multimode: 62.5/125 μm
Yellow jacket
Loose tube Tight tube Conforms with category OM1
2000 (1) 0325 12 Indoor/outdoor (universal) Multimode: 50/125 μm
6 fibres (ensured speed 1 Gbps)
2000 (1)
0325 13 Outdoor, corrugated steel tape Type of sheath:
Conforms with category OM2
Multimode: 50/125 μm
6 fibres Internal/External
2000 (1)
0325 14 0325 50 Indoor/outdoor (universal) (glass anti-rodent protection) (ensured speed 10 Gbps over 300m)
External (structure can be Conforms with category OM3
12 fibres buried, reinforced ringed-steel Monomode: 9/125 μm
2000 (1)
0325 15 Outdoor, corrugated steel tape protection)
12 fibres (ensured speed 10 Gbps)
2000 (1)
0325 51 Indoor/outdoor (universal) 24 fibres Conforms with category OS1
OM 3 multimode optical cables

(50/125 μm) DOCUMENTS
For 50/125 μm multimode installations
(OM 3) Each link is supplied with a test report (fibre by fibre) and illustrated
Green jacket operating instructions
900 μm
Loose tube Tight tube 10 Gigabit Ethernet compliant
2000 (1)
Notice d’utilisation / user guide
0325 10 Indoor/outdoor (universal) t

Stockage : Utiliser l’emballage d’origine.
Prévenir l’écrasement en cas de stockage
temporaire en balisant l’emplacement du câble.
Storage: use the original packaging. To prevent

crushing during temporary storage, mark out the
Manipulation du câble / branchement : dérouler le
câble de façon à ce qu’il ne subisse pas de torsion ni
de contraintes en se vrillant.
Handling of the cable / connection: lay out the cable so

that it does not undergo torsion nor constraints while
Ouvrir la protection avec un cutter
longitudinalement par rapport au câble
Open the protection with a cutter along the cable
6 fibres
being bored.
ol shee
location of the cable.
ôle / Contr
de Contr
Feuille
2000 (1) 0325 11 Indoor/outdoor (universal) Date
:
/ /
Code
Lg :
:
M
12 fibres
/
lation dr
Type
: Int - Ext Manipuerio es connecteurs : Ne pas tirer sur les
ur / Ext
connecteurs, les manipuler avec précaution.
Ext : Exterie ~ avant tonm

Protection des connecteurs : laisser les bouchons en
Ext : place 850 ut branchement. Nettoyer la ferrule

avec de l’air sec ou de l’alcool si nécessaire
Int : r
0, dB
2000 (1) 0325 53 0325 52 Indoor/outdoor (universal) Int : Inte
fibre
rieur
/ fiber
:
/ Interio
FO
0, dB
0, dB
Handling of the connectors: don’t draw on the
connectors, handle them with precaution. Protection of
0, dB
the connectors: leave the protective caps before any
connection. clean the ferrule with dry air or alcohol if
necessary
0, dB
24 fibres 0, dB
0, dB
0, dB
Respect du rayon de courbure :
0, dB
lover le câble en respectant un
rayon minimum de 30 cm
Mise en place des colliers de
fixation : ne pas trop les serrer
afin de ne pas écraser la fibre
0, dB
Respect of the radius of curvature: Installation of the cable ties:
0, dB
coil the cable by respecting a don’t tighten them too much in
minimum ray of 30 cm order not to crush fibre
0, dB
B 0, dB
0, dB 0, dB
OM 2 multimode optical cables A
0, dB
0, dB
0, dB
0, dB
0, dB
(50/125 μm) 0, dB
0, dB 0, dB
568B3 dB
0, dB /EIA
+ TIA 100)= 1,1
11801 *
/CEI dB/km de D1
um ISO + (3,5 métho
maxim m = 0,75. -171A
For 50/125 μm multimode installations

lg 100 TIA/EIA 455
Ex. : Test
900 μm (OM 2)
Loose tube Tight tube Orange jacket
2000 (1) 0325 54 Indoor/outdoor (universal) PACKAGING
2 fibres
(1)
2000 0325 59 0325 55 Indoor/outdoor (universal)
4 fibres According to length of link:
2000 (1) 0325 04 0325 08 Indoor/outdoor (universal) - packed
6 fibres on a reel
2000 (1) 0325 05 Outdoor, corrugated steel tape - packed
6 fibres on a ring
2000 (1) 0325 06 0325 09 Indoor/outdoor (universal) Connector protection by
12 fibres tube
2000 (1) 0325 07 Outdoor, corrugated steel tape Reel
12 fibres
2000 (1) 0325 60 0325 58 Indoor/outdoor (universal)
24 fibres
OM 1 multimode optical cables
(62.5/125 μm)
For 62.5/125 μm multimode installations
(OM 1)
900 μm Tight tube Orange jacket
2000 (1) 0325 00 Indoor/outdoor (universal)
6 fibres
2000 (1) 0325 01 Indoor/outdoor (universal)
12 fibres
(1) in metre(s)
fibre optic fibre optic
case and rapid crimping connectors Mosaic glue-on connectors and sockets
0331 27 0331 00
0330 49
Pack Cat.Nos Precision Fibre Optic Cleaver

0331 93 1 0331 97 FO cleaver
Pigtails
Supplied with 900 µm sleeve, 1 m
10 Gb - 50/125 µm
6 0326 22 SC connector
6 0326 23 LC connector
1 0326 27 6 x LC-PC connectors
1 0326 26 12 x LC-PC connectors
0331 06 0331 08 0331 10 9/125 µm
6 0326 20 SC connector
6 0326 21 LC connector
Installation and performance principles (p. 81) 1 0326 25 6 x LC-UPC connectors
1 0326 24 12 x LC-UPC connectors
Thermoretractable sleeve for pigtails
Pack Cat.Nos Rapid crimping connectors 900 µm 1 0327 44 40 mm - pack of 50 sleeves
Prepolished connectors with ceramic ferrule (UPC)
Attenuation < 0.3 dB Glue-on connectors 50/125 and 62.5/125 µm
No glue, polishing or current supply required
Unlimited storage period Supplied with sleeve 900 µm
For exclusive use with case Cat.No 0331 93 Connectors with ceramic ferrule
Typical attenuation: 0.3 dB
Monomode connectors 10 0331 27 ST connector
10 0331 12 LC connector for 9/125 μm fibre 10 0331 47 SC connector
10 0331 13 SC connector for 9/125 μm fibre 10 0331 00 LC connector
Multimode connectors
10 0331 06 LC 10 Gb connector for 50/125 μm Spreaders
10 0331 07 SC 10 Gb connector for 50/125 μm
10 0331 08 ST 10 Gb connector for 50/125 μm For 900 µm of optical fibres
10 0331 09 LC connector for 62.5/125 μm fibre Take 250 µm fibre diameters
1 0330 48 6 fibre spreader
10 0331 10 SC connector for 62.5/125 μm fibre 1 0330 49 12 fibre spreader
10 0331 11 ST connector for 62.5/125 μm fibre
Installation case for rapid crimping

connector
1 0331 93 Used for quick and simple installation of ST, SC or
LC fibre connectors
Complete kit supplied with:
- installation instructions and video
- stripping tool (for fibres and cables)
- cleaving tool
- microscope for checking the quality of the cut
- crimping tool
- accessories (scissors, marker, wipes)
fibre optic
19" optic drawers
"Tail-coat" enclosure rear

for easier cable entry 0335 10 fitted with fibre optic units
0335 13 0335 12 0335 16 0335 11 fitted with fibre optic unit 0335 17
Pack Cat.Nos 19" optic drawer Pack Cat.Nos Fibre optic cassette for patch panel
1 0335 10 Modular optic drawer 1 0335 11 Ensures fibre coiling (from 2 to 12 fibres)
Slide-in and modular drawer Takes a fibre optic unit
Limit switch stop with 45° slope Cat.Nos 0335 12/13/16/17/18/19
Maximum capacity: Used for linking copper and fibre optic blocks on the
- 24 x ST and SC connectors ST same LCS2 patch panel
- 48 x LC connectors
Depth 220 mm, height 1 U
Supplied with screws and wiring accessories Blanking plate for 19" panel
Takes up to 4 fibre optic units (see below)
10 0335 91 Black
Fibre optic units

Clip directly onto the optic drawer
Cat.No 0335 10 or on the patch panels with fibre
optic cassette Cat.No 0335 11
Monomode fibre units (9/125 μm)
1 0335 13 LC unit for 6 monomode fibres
1 0335 12 SC unit for 6 monomode fibres
Multimode fibre units (62.5 and 50/125 μm)
1 0335 16 ST unit for 6 multimode fibres
1 0335 17 SC unit for 6 multimode fibres
1 0335 18 LC unit for 6 multimode fibres
1 0335 19 High-density LC unit for 12 multimode fibres
Switch/fibre optic unit

Clips directly onto the patch panels
1 0335 05 6 x RJ 45 ports + 1 cascade LC type optic port at
the front
Copper/fibre optic converter units

For simply and fast copper to fibre conversion and
vice versa
Clip directly onto the patch panels
Fitted with an SC type fibre optic connector
1 0335 06 10/100 base T to 10/100 base FX type SC
1 0335 07 1000 base T to 1000 base SX type SC
19" high density optic drawer fibre sockets
0786 16 0786 17
0325 69 0786 18
Pack Cat.Nos 19" high density optic drawer Pack Cat.Nos Fibre sockets
1 0325 69 Modular optical drawer Fitted with duplex feedthrough 2 inlets 2 outlets
Slide-in and modular drawer Used for connecting 2 fibres (fitted with their
Maximum capacity: connector)
- 36 ST and SC connectors Supplied with protective caps
- 72 LC connectors Fitted with transparent marker holder
Depth 220 mm, height 1 U 2 modules
Supplied with screws and wiring accessories
Receives up to 3 fibre optic units below Socket with fibre optic feedthrough 2 x ST
Bayonet connection (STII compatible)
1 0786 16 White
Fibre optic units
Clip directly onto the optic drawer
Cat.No 0325 69 Socket with fibre optic feedthrough 2 x SC
Monomode fibre units (9/125 μm) Push-pull connection
1 0786 17 White
1 0325 73 LC duplex unit for 12 monomode fibres - blue
1 0325 74 LC duplex unit for 24 monomode fibres - blue
1 0325 70 ST duplex unit for 12 monomode fibres - blue
1 0325 71 SC duplex unit for 12 monomode fibres - blue Socket with fibre optic feedthrough 2 x LC
1 0325 72 MPO unit type A for 6x12 monomode fibres - blue Push-pull connection
1 0786 18 White
Multimode fibre units (62.5 and 50/125 μm)
1 0325 78 LC duplex unit for 12 multimode fibres - beige
1 0325 79 LC duplex unit for 24 multimode fibres - beige
1 0325 75 ST duplex unit for 12 multimode fibres - beige
1 0325 76 SC duplex unit for 12 multimode fibres - beige
1 0325 77 MPO unit type A for 6x12 multimode fibres - beige
Accessory
1 0335 93 Blanking plate
Accessories common to 2 optical drawers

Cassette for pigtails
1 0329 07 12 fibre capacity
Bend limiting clip
8 0335 94 Fibre management bend limiting clip
zone distribution boxes Patch cords
0326 01 0326 07
0335 40
0335 20 accessoire
fibre optique
0786 16
0326 16 0326 13
Pack Cat.Nos Zone distribution boxes
For distribution of low current in a zone fitted with
1 to 12 RJ 45 sockets Centralise connections
to guarantee flexibility and adaptability of the Technical characteristics (p. 106)
installation
Installed on false ceiling or false floor
Connect to the patch panel or the floor cabinet Fitted with 2 connectors with ceramic ferrule at either end
Conform to standards UTE C 15-900, NF C 15-100, Packed and tested singly (report supplied)
NF C 20-730, EN 50-174.2, CEI 60950, ISO/IEC Zipcord LSZH sleeve
11801 Ed. 2.0, EN 50173-2 and EIA/TIA 568
Cords and cables: ISO 11801 id.2.0, EN 50173-1, Pack Cat.Nos OS 1 (UPC) monomode optical cords
EIA/TIA 568
Technical characteristics: Max. optical losses: 0.3 dB
- polycarbonate PC hood For OS1 9/125 μm monomode installations, OS 1
- polypropylene PP base type
- RAL 7035 Yellow sheaths
- holds connector units in place on the box: 100 N SC/SC duplex cords
- Cables anchored on support using Colring cable 3 0326 00 Length: 1 m
ties 3 0326 01 Length: 2 m
Self-assembly zone distribution box 3 0326 02 Length: 3 m
1 0335 40 Used for fitting fibre optic accessory units SC/LC duplex cords
3 0326 03 Length: 1 m
3 0326 04 Length: 2 m
Fibre optic accessory 3 0326 05 Length: 3 m
1 0335 20 Used for fitting fibre optic units (see p. 74) and the LC/LC duplex cords
fibre coil in the zone distribution box 3 0326 06 Length: 1 m
3 0326 07 Length: 2 m
3 0326 08 Length: 3 m
Sockets with fibre optic feedthrough
Fitted with duplex feedthrough 2 inlets / 2 outlets
Used for connecting 2 fibres (fitted with their OM 3 multimode optical cords (50/125 μm)
connector) Suitable for 10 Gb Ethernet network
Supplied with protective caps Max. optical losses: 0.3 dB
Fitted with transparent marker holder For 50/125 μm multimode installations, OM 3 type
2 modules Purple sheaths
Socket with fibre optic feedthrough 2 x ST SC/SC duplex cords
Bayonet connection (STII compatible) 3 0326 09 Length: 1 m
1 0786 16 White 3 0326 10 Length: 2 m
3 0326 11 Length: 3 m
SC/LC duplex cords
Socket with fibre optic feedthrough 2 x SC 3 0326 12 Length: 1 m
Push-pull connection 3 0326 13 Length: 2 m
1 0786 17 White 3 0326 14 Length: 3 m
LC/LC duplex cords
3 0326 15 Length: 1 m
Socket with fibre optic feedthrough 2 x LC 3 0326 16 Length: 2 m
Push-pull connection 3 0326 17 Length: 3 m
1 0786 18 White
Patch cords
■ Fast crimping with kit Cat.No 0331 93

Types of connector
- ST connector: Helical shape
locked by "push and turn" bayonet type
connector
0330 70
- SC connector: Rectangular shape
"push-pull" latch type locking.
Suitable for a large number
of active devices
Recommended in the generic standards
ISO/IEC 11801 and EN 50173
- LC connector: Rectangular shape

tab locking
Half the size of a
conventional connector
0330 65
The 6 essential steps for fast crimping

Step 1: Strip the fibre Step 2: Cleave the fibre
Pack Cat.Nos OM 2 multimode optical cords (50/125 μm)

Max. optical losses: 0.3 dB
For 50/125 μm multimode installations, OM 2 type
Orange sheaths
ST/ST duplex cords
3 0330 80 Length: 1 m
3 0330 81 Length: 2 m
3 0330 82 Length: 3 m
SC/SC duplex cords
3 0330 69 Length: 1 m Step 3: Inspect the fibre Step 4: Insert the fibre
3 0330 70 Length: 2 m
3 0330 71 Length: 3 m
ST/SC duplex cords
3 0330 72 Length: 2 m
3 0330 73 Length: 3 m
LC/LC duplex cord
3 0330 61 Length: 2 m
SC/LC duplex cords
3 0330 75 Length: 1 m
3 0330 63 Length: 2 m
3 0330 76 Length: 3 m Step 5: Align the fibre Step 6: Crimp the connector
LC/ST duplex cord
3 0330 65 Length: 2 m
OM 1 multimode optical cords

(62.5/125 μm)
Max. optical losses: 0.3 dB
For 62.5/125 μm multimode installations, OM 1 type
Orange sheaths
SC/SC duplex patch cords
3 0331 51 Length: 1 m
3 0331 52 Length: 2 m Technical characteristics
3 0331 53 Length: 3 m - The kit is used for attaching the connectors to 900 μm fibre
ST/SC duplex patch cords - Average loss of a connection: 0.3 dB
3 0331 57 Length: 1 m - Ideal for high-speed systems: 10 Gb Ethernet supplied with
3 0331 58 Length: 2 m 50/125 μm connector
LC/SC duplex patch cords - Operating temperature: from 0°C to 65°C
3 0330 77 Length: 1 m
3 0330 62 Length: 2 m Advantages:
3 0330 78 Length: 3 m - High quality finish
- No polishing: connectors pre-polished in factory
- No Epoxy type glue required
- Easy connection
- No complex tools or consumables required: the termination
is made in less than 3 minutes and is very cost-effective
- Practical, lightweight kit
- Both multimode and singlemode fibres can be crimped
Customised fibre optics (50/125 μm and 62.5/125 μm)
customised solutions p. 76
ArteorTM
audio and video sockets
5722 72 5737 73 5722 74 5727 71 5727 85 5722 76 5722 82 5727 79 5722 88
Pack Cat.Nos Audio and video sockets Pack Cat.Nos Audio and video sockets (continued)
2 x female RCA HDMI
For the stereo audio connection of any For digital high definition audio and video
DVD drive, camera, video recorder, etc. connection of a PC monitor, plasma
type peripheral screen, video projector, graphic paintbox,
White Magnesium Recommended cable: 1 shielded audio pair etc.
1/20 5722 72 5727 72 Square version Recommended cable Cat.No 0327 80
1 module 22.5 x 45 mm White Magnesium 2 modules 45 x 45 mm
1/20 5722 81 5727 81 Square version
1/20 5732 72 5737 72 Round version
2 modules 45 x 45 mm
1/20 5722 85 5727 85 Round version
3 x female RCA
For the composite video and stereo audio
connection of a DVD drive, camera, video S-video sockets (4-pin mini-DIN)
recorder, video conference equipment etc. 1-gang
Recommended cable: 1 shielded audio Provides the YC video link for any
pair + 1 x 3 mm mini-coaxial peripheral device such as a DVD drive,
1/20 5722 73 5727 73 Square version camera, video recorder, videoconferencing,
1 module 22.5 x 45 mm etc.
1/20 5744 01 5744 51 Square version
1/20 5732 73 5737 73 Round version 1 module 22.5 x 45 mm
2 modules 45 x 45 mm
1/20 5745 01 5745 51 Round version
Female 3.5 mm jack - square version 2 modules 45 x 45 mm
For stereo audio connection from a
portable source Female BNC 75
Recommended cable: 1 x 0.22 mm2 1/20 5722 76 5727 76 For the composite video connection
shielded audio pair of any DVD drive, camera, video
1/20 5722 74 5727 74 Connection on screw terminals recorder, etc.
1 module 22.5 x 45 mm Recommended cable: RG59 coaxial
Max. cable length: 10 m
1/20 5722 78 5727 78 Solder connection 1 module 22.5 x 45 mm
1 module 22.5 x 45 mm
Female HD 15
YUV - square version For VGA, XGA or VESA connection of a PC
For analog high definition connection of monitor, plasma screen, video projector,
a DVD, PC monitor, plasma screen, video graphic paintbox, etc.
projector, graphic paintbox, etc. Recommended cable Cat.No 0327 81
Recommended cable: 3 x 3 mm mini-coaxial Max. cable lenght 25 m (beyond this a VGA
(max. cable length 25 m) or 3 x RG59 amplifier is recommended)
coaxial (max. cable length 50 m) 1/20 5722 82 5727 82 Connection on screw terminals
1/20 5722 71 5727 71 1 module 22.5 x 45 mm 2 modules 45 x 45 mm
1/20 5722 79 5727 79 Solder connection

1 module 22.5 x 45 mm
Female HD 15 + jack 3.5 mm

White Magnesium 2 modules 45 x 45 mm
1/20 5722 88 5727 88 Square version
1/20 5722 89 5727 89 Round version
ArteorTM ArteorTM
HD 15 amplifier + Jack kit, equipment cords audio and video sockets
■ Installation of audio and video sockets in a meeting room
5723 70
0517 20 0517 22
0779 30
Pack Cat.Nos HD 15 amplifier + Jack kit
5723 70
White Magnesium
1 5723 70 5728 70 Used to connect audio/video terminals at a
distance of more than 20 m
The video link is via an HD 15 connector 5723 76
(resolution up to UXGA), and the audio link
via a 3.5 mm jack
Comprises:
- One 4-module Arteor transmitter supplied
with cover plate equipped with an HD 15
connector and a 3.5 mm jack
- One 4-module Arteor receiver equipped
with an HD 15 connector and a 3.5 mm Depending on the size and configuration of your meeting room, it is
jack recommended to link the system 5723 70 to an audio amplification
- One 4-module Arteor power supply to be device
connected on the mains then linked to the
receiver Cat. 6 cable (Cat.No 0327 56)
The transmitter and receiver are supplied HD 15 + 3.5 mm Jack cord (Cat.No 0517 22)
with an RJ 45 LCS jack for tool-free
connection
The link between the transmitter and
receiver is via a network cable ■ Installation of audio and video sockets for Home Cinema
(Cat.No 0327 56) (consult us)
Equipment cords 5722 80 5722 80
For connecting a socket to a terminal

HDMI cord
1 0517 20 Length 10 m
For connecting an HDMI socket to the
audio/video terminal (plasma screen, DVD
drive, Home Cinema, games console, etc)
For use at more than 10 m, use the HDMI
Booster Cat.No 0779 30
6 x 5722 73 5722 81
HD 15 cord + 3.5 mm Jack cord
1 0517 22 Length 2 m
For connecting an HD 15 video socket
and a 3.5 mm audio jack to a terminal (PC,
5722 80
video projector) 5722 80
HDMI booster 5722 81 5722 80
1 0779 30 Used to extend an HDMI connection 5722 73
Consists of 2 female connectors and
used as an addition to the HDMI cord (for
example cord Cat.No 0517 20)
Does not need an external power supply
Cables
For connecting 2 sockets
HDMI cable
1 0327 80 Length 20 m
For connecting HDMI sockets at a distance HDMI cable (Cat.No 0327 80)
of up to 10 m HDMI cord
Audio cable
VGA cable
1 0327 81 Length 20 m
For connecting full pin HD 15 sockets at a
distance of up to 20 m
customised Legrand cabling system LCS2
19" LCS² cabinets and enclosures 19" LCS² server enclosures
19" LCS2 CABINETS

Cable entry plate with Thermal management
brushes(1) (fan, thermostat)
No side Other colour, 180 RAL

panels
Fixed or Solid metal door,

pivoting opening to the
left,
no door
Earthing wire
Other key
Fixed shelves, codes
modular patch panel 1 U and Power supply unit
feedthrough, blanking plates,
DIN rail kit IP2X, modular optical
enclosure
(1) Pivoting cabinets
0463 85
19" LCS2 ENCLOSURES
30 SIZES Technical characteristics (p. 97)
Capacity 24 U 29 U 33 U 42 U 47 U
IP 20 - IK 08
Width 600 or 800 mm Enclosures with front and rear metal micro perforated door, handles
with no deadbolt
Depth 600, 800 or 1,000 mm Front door can be fitted with a DIN European cylinder (Cat.No 0307 10) with
option of fitting a handle Cat.No 0347 71/72
Rear door can be fitted with a key barrel Cat.No 0368 22/23/24/25/26/27
PANEL DEFINITION Removable side panels
Levelling feet adjustable from the inside
Thermal management: plate with Top cable inlets in 19" cut-out format, capable of taking 19" plates with
230 V fans, thermostat brushes, fans, etc.
Lighting kit(1)
Open bottom cable inlet
Rear door
Supplied with 4 x 19" uprights with marking of the U and depth adjustment
Enclosures can be dismantled completely where access is difficult
Enclosures can be linked with kit Cat.No 0463 39
Other key codes Supplied with earthing kit
Charcoal grey RAL 7016
Server enclosure
Pack Cat.Nos Server enclosures
No panels Permissible
Capacity Height (mm) Width (mm) Depth (mm) load (kg)
1 0463 85 42 U 2026 600 1000 630
19" cable entries: 1 0463 86 42 U 2026 800 1000 630
metal or plastic
Accessories
Set of 4 caster wheels
Base, ventilation/ 1
brush trap 0464 82 Set of 4 caster wheels for server cabinet
Load on the 4 wheels: 500 kg
Earthing wire/braid Level adjustment kit(1)
or ground fixing kit(1) Shelves
Screw-fixing on 4 x 19" uprights
Wiring management: vertical For enclosure depth 1000 mm
brush panels, patch extension, 1 0465 17 Fixed shelf depth 850 mm, 100 kg
supports, guards 1 0465 18 Telescopic shelf depth 850 mm, 100 kg
(1) Supplied ready for assembly Cable guide supports
Fast screw-free assembly of cable guides (p. 87)
Option of solid or micro perforated metal doors, screen print glass 1 0464 78 For width 600/800 mm
doors, double doors or no door Fitted between 2 supports Cat.No 0464 79
1 0464 79 For width 1000 mm
Pre-cut every 100 mm for height 500 to 200 mm
180 RAL colours available
Contact us for advice on assembling 19" equipment Earth braid
Capacity (mm²) Fixing spacing (mm) Ø of holes (mm)
20 0347 95 6 200 8,5
Bases, cable inlet plates, thermal

management, other accessories (p. 86)
19" equipment, cable management (p. 89)
19" LCS2 enclosures Linkeo 19" LCS2 enclosures
enclosures and cabling units enclosures and cabling units
0463 18 0463 34 + 1 enclosure 0463 18 0463 58 + additional 19" uprights Cat.No 0463 73
+ 1 extension enclosure 0463 30
Technical characteristics (p. 97) Technical characteristics (p. 97)
IP 20 - IK 08 Enclosures with reversible curved front door made of IP 20 - IK 08 Enclosures with reversible front door made of screen-
screen-printed safety glass. Side and rear removable panels Panels with printed safety glass. Removable side and rear panels
automatic equipotential link. Lock with 2433 A key for locking of the Panels with automatic equipotential link 2433 A key for locking of the
4 sides. Levelling feet adjustable from the inside. Top and bottom cable 4 sides
inlets, 19" cut-out format, capable of taking 19" plates with brushes, Levelling feet adjustable from the inside
fans, etc. 2 top and bottom cable inlets, 19" cut-out format, capable of taking
Supplied with 4 x 19" uprights with marking of the U and depth 19" plates with brushes, fans, etc.
adjustment. Option of cable and patch cord management in cabling Supplied with 2 x 19" uprights with marking of the U and depth
unit Cat.Nos 0463 34/35. Enclosures can be dismantled completely where adjustment. Option of cable and patch cord management in cabling unit
access is difficult. Enclosures can be linked with kit Cat.Nos 0463 37/38/39 Cat.Nos 0463 75/76
Charcoal grey RAL 7016 Enclosures can be dismantled completely where access is difficult
Enclosures can be linked with kit Cat.Nos 0463 78/79
Pack Cat.Nos 19" LCS2 enclosures Grey RAL 7035
Permissible
Capacity Height (mm) Width (mm) Depth (mm) load (kg) Pack Cat.Nos Linkeo 19" LCS2 enclosures
1 0463 00 24 U 1226 600 600 240 Height Width Depth Permissible
1 0463 06 29 U 1448 600 600 290 Capacity (mm) (mm) (mm) load (kg)
1 0463 12 33 U 1626 600 600 330 1 0463 52 33 U 1626 600 600 330
1 0463 18 42 U 2026 600 600 420 1 0463 58 42 U 2026 600 600 420
1 0463 19 42 U 2026 600 800 420 1 0463 59 42 U 2026 600 800 420
1 0463 21 42 U 2026 800 600 420 1 0463 60 42 U 2026 800 600 420
1 0463 22 42 U 2026 800 800 420 1 0463 61 42 U 2026 800 800 420
1 0463 23 42 U 2026 800 1000 420
1 0463 28 47 U 2248 800 800 470 Linkeo 19" LCS2 extension enclosures
1 0463 29 47 U 2248 800 1000 470 No side panels
19" LCS2 extension enclosures Supplied with joining kit
Height Width Depth Permissible
Capacity (mm) (mm) (mm) load (kg)
No side panels 1
Supplied with joining kit 0463 81 42 U 2026 600 600 420
1 0463 84 42 U 2026 800 800 420
Permissible
Capacity Height (mm) Width (mm) Depth (mm) load (kg)
1 0463 30 42 U 2026 600 600 420 Linkeo LCS2 cabling units
1 0463 33 42 U 2026 800 800 420 Can be attached to Linkeo LCS2 42 U enclosures
2 Easier cable and patch cord management
LCS cabling units Width 250 mm
Can be attached to LCS2 42 U enclosures Grey RAL 7035
Easier cable and patch cord management For enclosure depth (mm):
Width 250 mm 1 0463 75 600
Charcoal grey RAL 7016 1 0463 76 800
For enclosure depth (mm):
1 0463 34 600 Linkeo LCS2 joining kits
1 0463 35 800 For linking 2 Linkeo LCS2 enclosures
2
LCS joining kits For enclosure depth (mm):
1 0463 78 600
For linking 2 LCS2 enclosures 1 0463 79 800
1 0463 37 600 Linkeo 19" LCS2 uprights
1 0463 38 800
1 0463 39 1000 Set of 2 additional 19" uprights
1 0463 72 33 U
1 0463 73 42 U
enclosure bases cable inlets and thermal management
for enclosures
0464 61
Stay plate 0476 93 0464 63 0465 29

with cable guide
0464 66 0465 32
Kit 0464 52 consisting of 4 corner
blocks and solid traps at front/rear
Technical characteristics (p. 98) Technical characteristics (p. 98)
Pack Cat.Nos Enclosure bases Pack Cat.Nos 19" cable entry inlets
Opening on 4 sides 19" cable inlet plates for enclosures
Charcoal grey RAL 7016 Black RAL 9005
Plinth kits Plastic with brushes, snap on
Consisting of 4 corner blocks and solid 1 0465 28 1 U
traps at front / rear. Side traps to be 1 0465 29 2 U
ordered separately Solid plastic, direct clipping
Height 100 Height 200 For enclosure width (mm):
1 0465 32 1 U
1 0464 50 0464 52 600 1 0465 33 2 U
1 0464 51 0464 53 800
Metal with brushes
Sets of 2 solid side traps
Supplied with quick-fixing
Traps height 100 mm 1 0465 30 1 U
Order 2 sets for a base height of 200 mm 1 0465 31 2 U
(Cat.Nos 0464 52/53)
For enclosure depth (mm): Solid metal
1 0464 54 600 Supplied with quick-fixing
1 0464 56 800
1 0465 38 1 U
1 0464 58 1000 1 0465 39 2 U
Ventilated traps 1 0465 40 3 U
1 trap height 100 mm
For enclosure width/depth (mm): Thermal management
1 0464 60 600
1 0464 61 800 19" 3 U plates with fans
Traps with brush Fixed to the enclosure 19" cable inlets
1 trap height 100 mm or on 19" uprights
For enclosure width/depth (mm): 1 0464 87 2 x 230 VA fans
1 0464 62 600 1 0464 88 3 x 230 VA fans
1 0464 63 800
1 U ventilation drawers
For circulation of internal air
Base for cabling units Fit onto 2 x 19" uprights
1 0464 64 Assembled at front or rear between the On/off switch
bases of associated enclosures 1 0464 89 19" Ventilation shelf with 2 fans - depth 150 mm
Trap height 100 mm. Double the number of 1 0464 90 19" Ventilation shelf with 4 fans - depth 300 mm
traps for a height of 200 mm
Charcoal grey RAL 7016 Thermostat
1 0348 48 Adjustable from 5 to 60 °C, 12 V to 250 VA
Stay plates Back contact (10 A) and front contact (5 A)
Fixed by magnet
Fixed between 2 corner blocks of
enclosure base
For clamping cables between associated
enclosures and fixing a cable guide
1 0476 93 600
1 0476 94 800
1 0476 95 1000
Linking interface
Protection allowing enclosure base and
cable duct to be linked
Supplied with weatherproof brush
Reversible cover with cut-outs ensuring a
high-quality finish
Height 200 mm
1 0464 66 For enclosure depth 600 mm
accessories and document holders Altis™ enclosures
for enclosures
0365 81 0365 82
Pack Cat.Nos Accessories

1 0464 83 Set of 4 casters for LCS2 enclosure (excludes
server enclosure)
Maximum permissible load on the 4 casters: 380 kg
1 0464 85 Lighting kit with switch 0473 62 + 0472 72 + 0482 20 0473 63 équipée
Supplied with 230 VA - 8 W fluorescent tube
Fixing 19" - 1 U Pack Cat.Nos 19" 42 U Altis enclosures
1 0464 84 Level adjustment kit
Stabilises the enclosure on removal Protection against dust, water, knocks in demanding
of heavy products installed on environments - IP55 - IK10
runners Suitable for exceptionally large loads (up to 720 kg)
1 0464 86 Floor fixing kit Reversible door
Enables a enclosure to be fixed 4-point locking with double bar (barrels: please refer
permanently into the ground to Legrand catalogue 2010)
Removable rear panel
Cable inlets at bottom
Self-adhesive document holders for plans 19" uprights and side panels to be ordered
Open - RAL 7035 separately
Ext. dimensions Int. dimensions Compatible with 19" LCS² equipment
Height (mm) Width (mm) Height (mm) Width (mm) Depth (mm) Cat.Nos 0331 35 and 0464 80
20 0365 80 235 340 200 310 18 Grey RAL 7035
20 0365 81 165 260 130 230 18 Glass door enclosures
Closed - RAL 9002 Coloured toughened glass
1 0365 82 Stiff, plastic, IP 50 Dimensions Window dim.
Height Width Depth Height Width Weight
Int. dimensions: 324 x 120 x 18 mm (mm) (mm) (mm) (mm) (mm) (kg)
Transparent 1 0473 62 2000 600 600 1775 375 91.7
10 1 0473 63 2000 800 600 1775 575 110.4
0097 99 Soft plastic, A4 - 305 x 220 mm
1 0473 91 2000 600 800 1775 375 95.2
1 0473 92 2000 800 800 1775 575 114.6
Set of 2 side panels
For enclosures
Height Depth
(mm) (mm)
1 0472 72 2000 600
1 0472 75 2000 800
19" uprights
1 0482 20 Set of 2 42 U uprights (perforations 9.4 x 9.5 mm)
Supplied with mounting lugs and screws
Mounting in enclosures possible width 600 or
800 mm
Interior assembly kit - IP 55
for a 1000 kg/m3 load
1 0476 83 Set consisting of
- 4 brackets
- 2 joining feet
- 1 gasket
M 14 lifting rings
1 0476 96 Set of 4 rings
For a load of 1000 kg/m³
Ventilation drawers (p. 86)
19" LCS2 equipment
for enclosures and Altis
0465 01 0465 06 0465 09
0465 11 0465 45
Pack Cat.Nos Fixed shelves Pack Cat.Nos 230 VA power supply units
Black RAL 9005 Reversible front, rear and side mounting on 19"
Projecting mounting on 2 x 19" uprights uprights
Fast screw-free assembly Connection by 2.5 mm2 terminal block
Max. load 15 kg Provide a 2 U space
Height 2 U Supplied with screws
1 0465 00 Depth 115 mm 1 6339 10 5 x 2P+ sockets + switch
1 0465 01 Depth 200 mm 1 6339 11 5 x 2P+ sockets + MBC
1 0465 02 Depth 360 mm
Quick fixing on 4 x 19" uprights Replacement module for surge suppressor
Assembly exclusively on LCS2 enclosures (except 1 0775 41 For replacing the module after use
server enclosures) Modular unit
Max. load 50 kg 1
1
0332 79 Takes 16 Mosaic modules
0465 05 Depth 450 mm
For enclosure depth 600 mm
1 0465 06 Depth 650 mm
1 0465 07 Depth 850 mm
Screw fixed on 4 x 19" uprights DIN rail kit IP 2X
All purpose assembly for all enclosures 1 0465 45 For assembling Lexic modular appliances
Max. load 100 kg Attaches directly onto 19" uprights
1 0465 17 Depth 850 mm Encourages consideration of EMC constraints
For enclosure depth 1000 mm Capable of taking up to 7 x Mosaic 2P+E sockets at
the rear
Telescopic shelves Composed of:
Black RAL 9005 - metal box
- 3 x DIN profile rails
Quick fixing on 4 x 19" uprights
4 modules
Assembly exclusively on LCS2 screw-free enclosures
(except server enclosures) - terminal block for
Max. load 50 kg protection conductors
1 0465 08 Depth 450 mm - a 2 U faceplate
For enclosure depth 600 mm - 3 blanking plates
1 0465 09 Depth 650 mm - 9 cable entry glands
For enclosure depth 800 mm Height 2 U
1 0465 10 Depth 650 mm Black RAL 9005
Screw fixed on 4 x 19" uprights
All purpose assembly for all enclosures
Max. load 100 kg
1 0465 18 Depth 850 mm
Fixed runners
Set of 2 fixed runners
Fit onto 4 x 19" uprights
Max. load: 50 kg
Keypad support shelf

1 0465 19 Screw fixed on 4 x 19" uprights
For enclosure depth ≥ 800 mm
Max. load 50 kg
Accommodates:
- a computer screen 10" LCS2 cabinets
- un a keypad on the retractable support
- a mouse on a sliding shelf with integrated mat
Area for mouse or CD. Black RAL 9005
see p. 90
LCS2 cable management
0465 32
0465 38
Pack Cat.Nos Enclosure cable and cord management

(continued)
Patch extension
For 42 U enclosures, width 800 mm
Fix onto 19" uprights
1 0464 81 Set of 2 uprights allowing 12 U enclosure capacity to
0464 80 0464 81 0331 35 be increased for vertical assembly of 19" equipment
(feedthrough panels, DIN rail kit, power supply units,
Pack Cat.Nos Enclosure cable and cord management etc.)
Delivered with 8 cable guide connecting rings
Set of 3 cable management supports Cat.No 0465 42
Fixing on structure Black RAL 9005
Fast screw-free assembly of cable guides
1 0464 72 For enclosure width/depth 600 mm 19" feedthrough panels
Fixing centre: 508 mm For organisation and circulation of patch cords
1 0464 73 For enclosure width/depth 800 mm Black RAL 9005
Fixing centre: 708 mm
1 0464 74 For enclosure depth 1000 mm Metal, 2 axes
Fixing centre: 908 mm Horizontal and through run. Fitted with radiated
Flat cable guides plastic connecting rings for optimum protection of
cords (respecting the curvature radius)
Fast screw-free assembly on brackets of wiring Supplied with quick-fixing
management. Width 250 mm 1 0465 22 1 U
1 0464 76 For enclosure 33 U
1 0464 77 For 42 U enclosures
U Cable guides
For cable ducting 1 0465 23 2 U
Join with linking crosspieces
Cat.Nos 0476 93/94/95 in
a base of linked enclosures
and supports Cat.Nos 0464 78/79
to server enclosures Plastic with brushes, snap on
1 1 0465 28 1 U
0464 69 3000 x 200 x 54 mm
1 1 0465 29 2 U
0464 70 3000 x 400 x 54 mm
Cable management grille
For 42 U enclosures, Metal with brushes
width 800 mm
Fix onto 19" uprights Supplied with quick-fixing
1 0331 35 (1) Guard with articulated bolts 1 0465 30 1 U
Dimensions : 1560 x 100 x 150 mm 1 0465 31 2 U
Vertical feedthrough
For 42 U enclosures, width 800 mm
Fix onto 19" uprights 19" blanking plates
1 0464 80 (1) Set of 2 vertical panels with brush through-wiring
Supplied with 10 cable guide connecting rings Black RAL 9005
Cat.No 0465 42, 3 cable ties Cat.No 0331 94, 3 cable ties Solid plastic, direct clipping
Cat.No 0331 95 and 3 cable ties Cat.No 0331 96 1 0465 32 1U
Black RAL 9005 1 0465 33 2U
Solid metal
Supplied with quick-fixing
1 0465 38 1U
1 0465 39 2U
1 0465 40 3U
Cable guide connecting rings

Snap on front structural uprights of fixed cabinets
(1)Can also be installed in 19" Altis width 800 mm
9 U to 21 U (Cat.No 0465 41 only) and central upright
of cabinets depth 580 mm
4 0465 41 1 U, plastic. Useable section 1890 mm2
4 0465 42 2 U, plastic. Useable section 4,070 mm2
Customised 19" LCS2 enclosures Fixing screws
Set of 50 cage-nuts, 50 plastic
washers and 50 x M6 screws
1 0364 53 With 8.5 mm cage nuts
Please consult Legrand Office 1 0364 54 With 9.5 mm cage nuts
19" LCS2 cabinets and accessories
0462 01 0462 11 Pivoting cabinet 0462 11 0465 01
Technical characteristics (p. 100)
IP 20 - IK 08
With reversible rounded print screen glass safety door
Pivoting side panels, tool-free removal from inside
Lock closure with key 2433 A
Supplied with 2 x 19" uprights with depth adjusting aid
Supplied with earthing kit
High and low grilles for natural ventilation, capable of taking a fan in the high part
Pack Cat.Nos Wall-mounting 19" LCS2 cabinets Pack Cat.Nos Fixed shelves
Easier cable management: ability to fix cable guide Fast non-screw assembly
connecting rings Cat.Nos 0465 41/42 (p. 89) and Max. load 15 kg
cable ties (see Legrand catalogue) Black RAL 9005
DLP format cable entries at the top and bottom, Projecting mounting on 2 x 19" uprights
bendable, with ability to truss cables using cable 1 0465 00 Depth 115 mm
ties For cabinets depth 400, 580 and 600 mm
Rear pre-cut cable entries 1 0465 01 Depth 200 mm
Cabinet depth 400 mm For cabinets depth 400, 580 and 600 mm
Permissible 1 0465 02 Depth 360 mm
Capacity Width (mm) Height (mm) load (kg)
1 For cabinets depth 580 and 600 mm
0462 00 6U 600 350 18
1 0462 01 9U 600 500 27
1 0462 02 12 U 600 600 36
1
Thermal management
0462 03 16 U 600 800 48
Cabinet depth 580 mm Fan
1 0462 06 9U 600 500 27 2.5 m power supply cable
1 0462 07 12 U 600 600 36 1 0462 60 230 VA fan
1 0462 08 16 U 600 800 48
1 0462 09 21 U 600 1000 63 Thermostat
1 0348 48 Adjustable from 5 to 60 °C, 12 V to 250 VA
Back contact (10A) and front contact (5 A)
2
Pivoting 19" LCS cabinets Fixed by magnet
Cabinets composed of:
- base (wall fixing) Cable entry
- pivoting object allowing free access to the rear of
the cabinet to facilitate installation and maintenance 1 0462 55 Cable entry plate with brush
Reversible pivoting direction For pivoting cabinets
Full cable entry plate at top and bottom, a brush
plate can be fitted Cat.No 0462 55
Accessories
Cabinet depth 600 mm
Permissible load 1 0462 64 Set of 4 casters for assembly on pivoting cabinets
Capacity Width (mm) Height (mm) (kg) Total load permissible on the 4 casters: 120 kg
1 0462 11 9U 600 500 27
1 0462 12 12 U 600 600 36
1 0462 13 16 U 600 800 48
1 0462 14 21 U 600 1000 63
19" LCS2 power supply extensions (see p. 88)
19" Feedthrough panels
see p. 89
voir xx
Linkeo 19" LCS² cabinets 10" LCS2 cabinet for small business
ith
tible w
Compa S2 cabinet
19" LC ipment
equ
0335 92
0462 42 0462 70 0462 20 0462 23
IP 20 - IK 08
Wall-mounting cabinets with reversible flat glass safety door with Technical characteristics (p. 100)
integrated lock
Supplied with 2 x 19" uprights with adjustable depth
Cable entry at top adjustable with foam seal Pack Cat.Nos 10" LCS2 cabinet
Rear and bottom cable entries equipped with blanking plates
High grilles for natural ventilation capable of taking the fan kit 300 mm depth cabinet
Cat.No 0462 70 Compact cabinet suitable for small business
Supplied with earthing kit applications up to 36 RJ 45 sockets
Cabinets compatible with 19" LCS2 cabinet equipment IP 20 – IK 08
(except cable guide connecting rings) Equipped with:
Grey RAL 7035 -1 reservible curved door made of safety glass
-2 side panels removable from inside
-key locking n 2433A
Pack Cat.Nos Linkeo 19" LCS2 wall-mounting
fixed cabinets cabinets -2 depth adjustable uprights
Height Width Depth Net weight Permissible -top and bottom cable entries to DLP trunking
Capacity (mm) (mm) (mm) (kg) load (kg) system format
1 0462
462 3030 6U 367 600 400 18 18 -pre-cut back cable entries
1 0462
462 31
31 9U 500 600 400 20 27 -top and bottom perforations for natural ventilation
1 0462
462 42
42 12 U 625 600 600 30 36 Charcoal grey RAL 7016
1 0462
462 43
43 16 U 810 600 600 36 48 Permissible load
Capacity Width (mm) Height (mm) (kg)
1 0462 20 6U 314 352 12
Linkeo LCS2 fan kit
1 0462
462 70
70 Kit contains: 10" equipments
- 2 fans
- 1 thermostat Modular empty panel
- ON/OFF switch 1 0335 92 10" panel - 1 U
Supplied with 2.3 m cable For up to 2 connector units or 2 fibre optic units (p. 74)
Power supply 230 VA - 50/60 Hz Fixed shelf 1 U
1 0462 23 Depth 120 mm
max. load. 10 kg
230 Vac power supply units
1 0462 25 To be equipped with Mosaic 2P+E sockets
Capacity: 8 modules
1 0462 26 4 x 2P+E Schuko sockets, black
Legrand
pour exemple
cabling system LCS2
: xxxxxxx
xxxxxxxx
cabinets
6348 05 6348 02
Pack Cat. Nos Wall mounting cabinets Dimensions

(mm)
Pack Cat. Nos Free Standing cabinets Dimensions
(mm)
Wall mounting cabinets equipped with Hx Free Standing Cabinets equipped with Hx
One door made of tinted glass WxD Reversable door made of Tinted glass WxD
Top & bottom cable entry plates Reversal metal rear door
Ventilation grills at sides Ventillation grills on all sides
White RAL9002 Cable entry at top and bottom
Reducing cable channels through the
1 6348 05 6U capacity cabinet 371.30 x usable ht white RAL9002
600 x 500
1 6348 00 22U capacity cabinet 1124.9 x
1 6348 06 9U capacity cabinet 504.65 x 800 x 800
600 x 500
1 6348 04 27U capacity cabinet 1357 x
1 6348 07 12U capacity cabinet 638 x 800 x 800
600 x 500
1 6348 08 15U capacity cabinet 771.35 x 800 x 800
600 x 500
800 x 800
Accessories
1 6348 16 Mounting accessories Pkt (20 nos. each of 3)
Accessories Dimensions
(mm)
1 6348 17 Cable manager 1U Metal HxD
1 6348 15 230 V AC 90 CFM fans 1 6348 11 Heavy duty shelf support 600 X 475
1 6348 10 Cantilever Trey. 1U 225D 1 6348 16 Mounting accessories Pkt

(20 nos. each of 3)
1 6348 18 Earthing strips 150 mm H
1 6348 17 Cable manager 1U Metal
1 6348 15 230 V AC 90 CFM fans
1 6348 18 Earthing strips 150 mm H
pour
Legrandexemple
cabling system LCS2
: xxxxxxx
xxxxxxxx TM
Arteor
cover plates - square and round version
5757 10 5757 40 5759 10 5759 30
Pack Cat.Nos Neutral - square version Pack Cat.Nos Neutral - round version
Supplied with support frames Supplied with support frames
Dimensions Dimensions
White Indian standard in mm White Indian standard in mm
10/100 5757 00 1 module 92 x 92 10/100 5759 00 2 modules 92 x 92
10/100 5757 10 2 modules 92 x 92

10/100 5759 10 3 modules 129 x 92
10/100 5757 20 3 modules 129 x 92

5/50 5759 20 4 modules 157 x 92
5/50 5757 30 4 modules 157 x 92

5/30 5759 30 6 modules 237.5 x 92
5/50 5757 40 6 modules 237.5 x 92
5/30 5765 80 8 modules 252.5 x 92
5/50 5757 50 8 modules 252.5 x 92
2/20 5759 40 2 x 4 modules 157 x 178
2/20 5757 60 2 x 4 modules 157 x 178
2/16 5759 50 2 x 6 modules 237.5 x 178
2/20 5757 70 2 x 6 modules 237.5 x 178
2/20 5757 80 2 x 8 modules 237.5 x 178
2/12 5757 90 3 x 6 modules 237.5 x 246
2/12 5758 00 3 x 8 modules 237.5 x 246
Legrand
pour exemple
cabling system LCS2
: xxxxxxx
xxxxxxxx TM
Arteor
cover plates - square and round version
5757 21 5757 22 5759 11 5759 12 5759 22
Pack Cat.Nos Neutral - square version Pack Cat.Nos Neutral - round version
Pearl Alu Indian standard
Graphite in mm Pearl Alu Indian standard
Graphite in mm
10/100 5757 01 5757 02 1 module 92 x 92 10/100 5759 01 5759 02 2 modules 92 x 92
10/100 5757 11 5757 12 2 modules 92 x 92 10/100 5759 11 5759 12 3 modules 129 x 92
10/100 5757 21 5757 22 3 modules 129 x 92 5/50 5759 21 5759 22 4 modules 157 x 92
5/50 5757 31 5757 32 4 modules 157 x 92 5/30 5759 31 5759 32 6 modules 237.5 x 92
5/30 5757 41 5757 42 6 modules 237.5 x 92

5/30 5765 81 5765 82 8 modules 252.5 x 92
5/30 5757 51 5757 52 8 modules 252.5 x 92 2/20 5759 41 5759 42 2 x 4 modules 157 x 178
2/20 5757 61 5757 62 2x4 157 x 178

modules
2/16 5759 51 5759 52 2x6 237.5 x 178

modules
2/16 5757 71 5757 72 2x6 237.5 x 178

modules
2/16 5757 81 5757 82 2x8 237.5 x 178

modules
2/12 5757 91 5757 92 3x6 237.5 x 246

modules
2/12 5758 01 5758 02 3x8 237.5 x 246

modules
ArteorTM ArteorTM
cover plates - square version cover plates - round version
5763 18 5763 58 5763 28 5763 68
Pack Cat.Nos Tattoo Pack Cat.Nos Tattoo

Indian standard
Edition 1 in mm Indian standard
Edition 1 in mm
1/5/30 5762 98 1 module 92 x 92 1/5/30 5763 08 2 modules 92 x 92
1/5/30 5763 18 2 modules 92 x 92 1/20 5763 28 3 modules 129 x 92
1/20 5763 38 3 modules 129 x 92 1/20 5763 48 4 modules 157 x 92
1/20 5763 58 4 modules 157 x 92 1/5 5763 68 6 modules 237.5 x 92
1/5 5763 88 6 modules 237.5 x 92 1/5 5763 98 8 modules 252.5 x 92
1/5 5764 08 8 modules 252.5 x 92
For more cover plate options, refer Arteor Techincal Catalogue

MosaicTM plates Flush boxes
plastic plates
Sliding clamp for

vertical adjustment
6890 07 6890 09
6745 51 6745 52 6745 53
6890 10
6745 56
Pack Cat. nos. Mosaic white plates

Superior finish, screwless curved look.
Supported by metal frame behind for solid strength.
Possible to adjust in horizontal or vertical direction,
when flush box is tilted.
Supplied with 30 mm long screws for perfect fixing if
wall box is overflushed.
Dimensions 6890 11 6890 12
White cover plates (mm)
HxW
20/200 6745 51 For 1 module (square) 86 x 86

Pack Cat.Nos Flush boxes
Factory made metal sheet enclosure
Top, bottom, side and back wall knockout for conduit
20/200 6745 52 For 2 modules (square) 86 x 86 entry from any direction.
Possible to break open knockout without any special
tool. Dimensions (mm)
10/100 6745 53 For 3 modules 86 x 121 HxWxD
5/50 6745 54 For 4 modules 86 x 146 40 6890 07 For 1/2 modules 76.5 x 76.5 x 51.0
5/50 6745 56 For 6 modules 86 x 224

40 6890 08 For 3 modules 76.5 x 99.7 x 51.0
5/50 6745 57 For 8 modules 86 x 245

(for specific box)
fits on metal flush 40 6890 09 For 4 modules 76.5 x 136.8 x 51.0
box 689042
5/50 6745 58 For 8 modules 86 x 224

40 6890 10 For 6 modules 76.5 x 214.2 x 51.0
5/25 6745 92 For 8 modules 172 x 146

(2 row x 4)
40 6890 42 For 8 modules 77.3 x 232.8 x 51.0
10 6745 59 For 12 modules 172 x 224

(2 row x 6) 20 6890 31 For 8 modules 136.8 x 136.6 x 61
(2 row x 4)
10 6745 60 For 18 modules 240 x 224

(3 row x 6) 10 6890 11 For 12 modules 145.3 x 215 x 61.2
(2 row x 6) &
16 modules (2 row x 8)
10 6890 12 For 18 modules 213.3 x 215 x 61.2

(3 row x 6) &
24 modules (3 row x 8)
Important note : Fixing holes are in oblong shape for horizontal

adjustments of ± 5 mm. e.g. for 1 module 60.3 ± 5mm
19" LCS2 enclosures and server enclosures
■ General characteristics
Metallic extendable enclosures. RAL 7016 textured polyester coating providing excellent resistance to corrosion and scratching
Front glass safety door, front and rear micro perforated metal doors for server enclosures
Protection index (weatherproof) against solid objects and liquids: IP 20. Protection index against mechanical shocks: IK 08
Perforations in 19" uprights: 9.5 x 9.5 mm
Permissible load: 10 kg/U (or 420 kg for a 42 U enclosure), 15 kg/U for server enclosure
■ Compliance with standards

LCS2 enclosures comply with the following standards: LCS2 enclosures can be integrated into installations complying with
the following standards:
IEC 60529 (NF C 20-010) Degrees of protection provided by enclosures
EN 60529 (IP code) EN 50173-1 Information technology - Generic cabling systems
IEC 62262 (NF EN 50102, NF C 20-015) Degree of protection provided by EN 50174-1 & 2 Information technology - Cabling installation.
EN 62262 enclosures of electrical equipment against C 90-480-1 & 2
external mechanical impacts (IK code)
IEC 60950-1 Safety of data processing equipment ISO IEC 11801 Information technology - Generic cabling for customer premises
EN 60950-1
C 77-210-1 NF C 15-100 Low voltage electrical installations - recommendations
Part 4-41
EIA-310-D Cabinets, enclosures, panels and associated equipment
(ANSI/EIA/310-D-1992)
IEC 60297-1 and 2 (NF C 20-150, NF C 20-151) Sizes of mechanical structures
DIN 41414-7 of the 482.6 mm (19 in) series
IEC 60917-1 Modular order for the development of mechanical structures for
EN 60917-1 electronic infrastructures
IEC 60917-2-1 Modular order for the development of mechanical structures
EN 60917-2-1 for electronic infrastructures Coordination dimensions for
infrastructure interfaces in widths of 25 mm
(enclosure and frame dimensions)
■ Useable dimensions
800
600
A A
D C D C
B
B 450 e
E 450 e sag
bl E pas ile
Usa a ut
are
87(2) 87(2) 465 ce

465 ce an
(maximum 162)
an (maximum 162) Dist
Dist
G
G
F(2)
F(2) Min/Max
Min/Max
■ Overall dimensions (mm)

Usable area F(1) P Cat.Nos Capacity H(2) L D A B
Cat.Nos Capacity A E G
B C D Min. Max. 0463 00 24 U 1226
0463 00 24 U 1085
0463 06 29 U 1448
0463 06 29 U 1307 645 1208
645 490 425 H 0463 12 33 U 1626 610 1138
0463 12 33 U 1485 490 118 193 44
0463 18/30
0463 18/30
0463 19 845 690 625 0463 19 845
L 1408
0463 21 42 U 645 1886 490 425 0463 21 42 U 2026 645
0463 22/33 845 690 625 A B 0463 22/33 845 1608
0463 23 1045 690 890 825 122 197 144 0463 23 810 1045 1525 1808
0463 28 845 690 625 0463 28 845 1608
47 U 2108 47 U 2248
0463 29 1045 890 825
0463 29 1045 1808
Server enclosures
Cat.Nos Capacity H(2) L P A B
160°
0463 85 42 U 2026 610 1092 1138 1608
0463 86 42 U 2026 810 1092 1525 1808 Server enclosures
Usable area F(2)
Cat.Nos Capacity A E G
B C D Min. Max.
0463 85 42 U 1092 1886 490 890 825 122 197 144
0463 86 42 U 1092 1886 690 890 825 122 197 144
(1) Continuous adjustment with adjustments in widths of 12.5 mm (2) Without adjustment levelling feet (+17 to 50 mm with feet)
All dimensions are in mm
1 inch = 25.4mm
Accuracy of dimensions = ± 2mm
97
19" LCS2 enclosures, server enclosures and accessories
■ LCS2 cable entries (mm) ■ Enclosure bases (mm)

Pre-cut at the top and bottom in 19" format (useable area 451 mm) Base kit + side traps
14
W. 600 W. 800
D. 600
E
F C
D. 800 D A
B
00
or 2
100
Enclosure dim. Overall Mounting Usable area

D. 1000 -
Width x Depth A B C D E F
600 x 600 599 599 478 478 449 449
600 x 800 599 799 478 678 449 649
800 x 600 799 599 678 478 649 449
800 x 800 799 799 678 678 649 649
600 x 1000 599 999 478 878 449 849
■ LCS server enclosure cable entries (mm)
2
800 x 1000 799 999 678 878 649 849
Pre-cut at the top in 19" format (useable area 451 mm)
Bottom central cut (805 x 450 mm)
Height LOW
■ Linking interface (mm)
Left or right assembly of a enclosure fitted with a 200 mm high base
Width Reversible interface cover
600
Width
800
■ Weight enclosures (kg)

Weights shown correspond to net weight (without packaging)
Cat.Nos Weight Weight

Enclosure Extension enclosure C
A
0463 00 69 - A
C
0463 06 77 - B
B
0463 12 84 -
0463 18/30 (ext) 99 72 200
0463 19 110 -
0463 21 114 -
0463 22/33 (ext) 127 90
0463 23 151 - Enclosure dim.
A B C
Depth
0463 28 138 -
600 595 435 120
0463 29 163 -
■ Server enclosures
Weights shown correspond to net weight (without packaging)
Weight Weight
Cat.Nos Enclosure Extension enclosure
0463 85 155 -
0463 86 166 -

1 inch = 25.4mm
98 Accuracy of dimensions = ± 2mm
Enclosure accessories 19" LCS2 (continued)
■ Supports for cable guides on server enclosures ■ Shelves (mm)

L3
réf. 0464 78 L2
L1
P P C
réf. 0464 79 Useable width

Cat.Nos D C
L1 L2 L3
0465 00 115 430
0462 23(1) 120 216
0465 01 200 430
0465 02 360 430
0465 05 450 435
0465 06 650 435
Cable guides can be installed
quickly on the supports 0465 07 850 435
Cat.Nos 0464 72/73/74/78/79 0465 08 450 425 320
0465 09 650 425 420
0465 10 650 425 420
0465 17 850 435
0465 18 850 425 420
(1) Fixing centre 236.5 mm
■ 19" plates with fans (mm)
■ Keyboard support shelf (mm)

3U
89
465
482
850
max
. - 62
5 min
3U
.
89
460
max
.
465
482
Ventilation zone
Cat.Nos Section Output
5U
Number of fans (cm2) (m3/h) 250
0464 87 2 114 180

0464 88 3 172 270

1 inch = 25.4mm
99
Linkeo 19" LCS2 enclosures
Metallic extendable enclosures
RAL 7035 textured polyester coating providing excellent resistance to corrosion and scratching
Front glass safety door
Protection index (weatherproof) against solid objects and liquids: IP 20
Protection index against mechanical shocks: IK 08
Perforations in uprights: 9.5 x 9.5 mm
Permissible load: 10 kg/U (or 420 kg for a 42 U cabinet)
■ Compliance with standards: identical to LCS2
■ Overall dimensions (mm) ■ Cable entries (mm)

P Pre-cut at the top and bottom in 19" format (useable area 451 mm)
A B
Width 600 Width 800
H
D. 600
L 160°
D. 800
Cat.Nos Capacity H(1) L D A B
0463 52 33 U 1626
635 1208
0463 58/81 610 1138
0463 59 835
42 U 2026 1408
0463 60 635
810 1525
0463 61/84 835 1608
(1) Without adjustment levelling feet (+17 to 50 mm with feet)
■ Useable dimensions (mm) ■ Weight (kg)

Weights shown correspond to net weight
600 800 (without packaging)
Weight Weight
Cat.Nos Enclosure Extension
enclosure
A 0463 52 82 -
A
0463 58/81 (ext) 95 67
0463 59 106 -
D C D 0463 60 113 -
C
0463 61/84 (ext) 126 92
B E
E
87(2)
(maximum 162) 87(2)
(maximum 162)
G G
Additional uprights Additional uprights
450 F(2) 450 ea

F(2) ble ar
Usaea Min/Max s a ble
Min/Max U
ar
465 e 465
tan
c ce
Dis tan
Dis
Usable area F(2)

Cat.Nos Capacity A(1) E G
B C D Min. Max.
0463 52 33 U 1485
635 490 425
0463 58/81 490 44
0463 59 835 690 625 94 169
42 U 1886
0463 60 635 490 425
690 144
0463 61/84 835 690 625
(1) Overall dimensions

(2) Continuous adjustment with adjustments in widths of 12.5 mm

1 inch = 25.4mm
LCS2 19" and 10" cabinets
Metallic wall- mounting cabinets
Front safety glass door
Permissible load: 3 kg/U (or 48 kg for a 19" cabinet 16 U)
12 kg for the 10" cabinet 6 U
■ Compliance with standards
LCS2 cabinets comply with the following standards: LCS2 cabinets can be integrated into installations complying with the
following standards:
IEC 60529 (NF C 20-010) Degrees of protection provided by
EN 60529 enclosures (IP code). EN 50173-1 Information technology - Generic
IEC 62262 (EN 50102, NF C 20-015) Degrees of protection cabling systems.
EN 62262 provided by enclosures of electrical material against EN 50174-1 & 2 Information technology - Cabling installation.
external mechanical impacts (IK code). C 90-480-1 & 2
IEC 60950-1 Safety of data processing equipment. ISO IEC 11801 Information technology - Generic cabling for
EN 60950-1 customer premises
C 77-210-1
NF C 15-100 Low voltage electrical installations - Recommendations.
EIA-310-D Cabinets, enclosures, panels and associated equipment Part 4-41
(ANSI / EIA / 310-D-1992).
UTE C90-483 Residential cabling for communication networks
IEC 60297-1 & 2 (NF C 20-150, NF C 20-151) Sizes of mechanical
DIN 41414-7 structures of the 482.6 mm (19 in) series
■ Overall dimensions (mm)

Dep
th Cat.Nos Capacity Height Width Depth
600
0462 00 6U 350
0462 01 9U 500
400
0462 02 12 U 600
0462 03 16 U 800
Fixed 19" cabinets 600
Height
0462 06 9U 500
0462 07 12 U 600
580
0462 08 16 U 800
0462 09 21 U 1000
0462 11 9U 500
19" pivoting 0462 12 12 U 600

cabinets 600 600
0462 13 16 U 800
0462 14 21 U 1000
10” cabinet 0462 20 6U 352 314 300
Pivoting bottom opening Front opening door and side panels

D
C
93°
96
843
°
A
1 114
B
167°
175°
1 171
Open doors Open panels

Cat.Nos
A B C D
1 190
0462 00
0462 01
400 962 305 1205
0462 02 10" cabinet door opening Cat.No 0462 20
0462 03
Fixed 19" cabinets
0462 06
0462 07
580 1140 482.5 1565
0462 08
615
0462 09
180°
0462 11
19" pivoting 0462 12

cabinets 600 1179 482.5 1565
0462 13
660
0462 14

1 inch = 25.4mm
101
LCS2 19" and 10" cabinets
■ Useable dimensions (mm)
Fixed 19" LCS2 cabinets depth 400 mm 10" LCS2 cabinet depth 300 mm
50 50 Ove
Ove rall
rall dim
dim ens
600 ens
314
ions
area ions 305
ble
Usa 105
400 105
3x
50
Height 350 / 500 / 600 / 800

Capacity 6U / 9U / 12U / 16U
285 / 435 / 535 / 735
Usable area
.5
Usable area 288

200 x 80 525 222 rea
a
451 rea s a ble
a U
ble
200 x 140
Height 352
Usa 5 .5
150 / 250 /
350 / 550
6
23 ce
46 ce
n an
Dist
a Dist
(ma 258 (ma 207

xim xim
um um
3 08) 257
92 )
(minimum 42) 82
(minimum 32)
125 25
Fixed 19" LCS2 cabinets depth 580 mm 19" LCS2 pivoting cabinets depth 600 mm
50 62
Ove Ove
600 rall rall
dim 600 440 dim
area ens rea ens
ble ions a ions
Usa 105 580 Us able 615
3x
50
Height 500 / 600 / 800 / 1000
Height 500 / 600 / 800 / 1000


435 / 535 / 735 / 935
435 / 535 / 735 / 935

Usable area
200 x 80
Usable area
451 rea
550 / 750
250 / 350 /
a 451 rea
ble
Usa ble
a
525 465 ce Usa
Dist
an 465 ce
n
Dista
(ma 435 (ma 365

xim xim
um um
485 465
) )
92 200
(minimum 42) (minimum 100)
■ Fixing of cabinets (mm) ■ Weight (kg)

Capacity A B C D Cat.Nos Weight
0462 00 16.7
25
6U 275
ØC 9U 425 0462 01 20.4
B Fixed 19"
12 U 525 408 20 11 0462 02 22.8
cabinets
16 U 725 Fixed 19" 0462 03 26
21 U 925 cabinets 0462 06 25.7
D 9U 425 0462 07 32.7
A
19" pivoting 12 U 525 0462 08 41.5

500 18 9
cabinets 16 U 725 0462 09 52.5
A
21 U 925 0462 11 31.8

10” cabinets 6U 275 250 15 6.5 19" pivoting 0462 12 40
cabinets 0462 13 47.3
0462 14 59
A
10” cabinet 0462 20 8

1 inch = 25.4mm
Linkeo fixed 19" LCS2 cabinets
Metallic wall cabinets
Glass safety door
Perforations in uprights: 9.5 x 9.5 mm
Permissible load: 3 kg/U (or 48 kg for a 19" cabinet 16 U)
■ Compliance with standards: identical to 19" LCS2 cabinets
■ Overall dimensions (mm) ■ Fixing (mm)

Dep
th th
Wid
A
Cat.Nos Capacity A B
0462 30 6U 153
Height
0462 31 9U 286
400
0462 42 12 U 419
0462 43 16 U 597
B
■ Fan kit (mm)

Cat.Nos Capacity Height Width Depth
360 45
0462 30 6U 367
400
0462 31 9U 500
600
0462 42 12 U 625
600 Ventilation zone
190
0462 43 16 U 810
Cat.No Cross-
Number of section Output
3
fans (mm²) (m /h)
■ Door opening (mm) 0462 70 2 110 160
74,5
900
A
130°max. Cat.Nos Capacity A

0462 30 6U
930
0462 31 9U
0462 42 12 U
1130
0462 43 16 U

1 inch = 25.4mm
103
Legrand cabling system LCS2xxxxxx
■ Compliance of the LCS2 systems with standards and Dimensions

certifications
49,8
LCS2 systems and components (de-embedded)
conform to the following standards:
- EIA/TIA 568 B2.10 137,1
- EN 50173-1 and EN 50173-2 352 166
- ISO/IEC 11801 version 2
The LCS2 system supports 10G applications
Base-T up to 100 m in a transmission channel Performance
conforms with standards ISO/IEC 24750, TIA TSB 155 Maximum recommended lengths of links to ensure high performance
and IEEE 802.3 an of the systems with the use of RJ 45 sockets with copper feedthroughs
The class link EA of the LCS2 system also conforms with amendment and/or RJ 45 sockets
1 (04/2008) of standard ISO 11801 and its components conform with
draft amendment 2 Length Associated lengths (m)
LCS2 systems are certified by expert independent laboratory 3P Cords Cables Links
8 70 78
Cat. 6 15 60 75
■ Main characteristics of the LCS2 systems 20 55 75
8 75 83
LCS2 6A LCS2 6 LCS2 5e Cat. 5e 15 65 80
Frequency 500 Mhz 250 MHz 100 Mhz 20 60 80
Speed 10 Gbit/s 1 Gbit/s 1 Gbit/s
Wiring Copper FO Copper FO Copper We recommend selecting the shortest wiring lengths for more flexibility
Connectors RJ 45 SC-LC… RJ 45 SC-LC… RJ 45 regarding cord length in the event of reconfiguration
Length cable max. 100 m variable 100 m variable 100 m
■ New names for LAN cables (according to ISO 11801-2) Application example
A zone distribution box is installed to connect the RJ 45 sockets and
They correspond to: "type of cable shield"/ "type of twisted pair shield" meet the future requirements of the installation
TP monitoring (for twisted pairs)
Type
of cable Shield Shield
old new of the cable of pairs
twisted
name name
SSTP S/FTP S: screen made up F: screen
formed
a metal braid
of a ribbon
alumin/polyester
SFTP SF/UTP SF: combination of U: no screen Shielding of
ribbon + braid twisted pairs
STP U/FTP F: screen Cable shielding
formed
U: no screen of a ribbon
alumin/polyester
FTP F/UTP F: screen formed U: no screen
of a ribbon
alumin/polyester
UTP U/UTP U: no screen U: no screen
7 lines
■ Zone distribution boxes in reserve
Compliance with standards:

Zone distribution box: EIA/TIA 568
UTE C 15-900
NF C 15-100 - NF C 20-730
EN 50-174.2
ISO 11801
EN 50173 Connection to additional RJ 45 sockets is done by adding RJ 45 - RJ 45
IEC 60950 cords between the unit and the RJ 45 sockets with copper feedthrough
Cords and cables: ISO 11801 id.2.0, EN 50173-1, EIA/TIA 568
General characteristics:
- 6 or 12 incoming ports (depending on Cat.No)
RJ 45 wiring
- 4 to 8 or 12 outgoing ports (depending on Cat.No) maximum
Connection of mixed cords via RJ 45 connector
(RJ 45/stripped)
- UTP and FTP versions
- Cat. 5e and 6
- for computer applications; telephone, access control etc.
- material: polycarbonate PC hood
Polypropylene PP base
1 line
- colour: RAL 7035 in reserve
- Weatherproofing protection index: IP 21
- Mechanical shock protection index: IK 07
- holds connector units in place on the box: 100 N
- Cables anchored on support using Colring cable ties

1 inch = 25.4mm
Legrand cabling system LCS2xxxxxx
■ Flush-mounting Ethernet 10/100 base T switches ■ Benefits of a Legrand Wi-Fi access point
- Possibility of simultaneous operation on 2 frequencies, a and b/g
0779 00 0779 01 0779 20 New products: invited access: used to allocate a network dedicated to
Power supply 230 V PoE 230 V visitors
Provides a max. gross speed of up to 2 x 54 Mbps in simultaneous
Speed 100 Mbps
mode
Standards 802.3 / 802.3u 802.3u 802.3 / 802.3u
- Very high security level: WPA2 encryption (802.11i) and authentication
802.3 af
(802.1x)
Common s/PERATINGTEMPERATUREFROMª#TOª# - Possibility of roaming (moving from one access point to another
technical s-AXHUMIDITYLEVELPERMISSIBLE
characteristics without breaking the link)
s!UTO-$) 8TAKESCROSSEDANDSTRAIGHTCORDS - Quality of service (priority automatically given to voice, then video and
s/RANGE,%$ ONSPEEDOF -BPS finally data)
- off: speed 10 Mbps - Easy to configure and make secure: using the CD supplied
s'REEN,%$ONTRAFFIC with the access point
Additional s3.-06#2&#
characteristics s3UPPORT-)"))2&#
■ Installation
s)0ADDRESSINGVIA$(# In all supports able to take a Mosaic mechanism (trunking, columns,
(according to RFC 2131) flush-mounting boxes, floor boxes, etc.)
s#ANBEADMINISTEREDVIA7%" Do not place access points behind anything that could limit the
interface
antenna's range
s"ACKUPANDUPDATINGOF
configuration files (Upload/
Access points are connected tool-free via an RJ 45 connector
download)
■ Sizing
■ Arteor / Mosaic Wi-Fi access points - provide 1 access point for 1 localised requirement (in entrance hall)
An 802.11 a and b/g solution - provide 1 access point per 100 m2 for overall coverage and a
Radio communication standard 802.11 b/g 802.11 a maximum gross speed
Power supply standard - provide 1 access point with an RJ 45 socket for a desk used by visitors
802.3 af
Power over Ethernet
between 2.40
Frequency band 5 GHz
and 2.48 GHz
Number of available channels 13 8
Max. gross speed 54 Mbps 54 Mbps
■ Installation principle for a Wi-Fi access point with Power ■ Operation of PoE injector
over Ethernet injector A PoE injector has one input and one output per access point to be
supplied
Incoming switch: data
Power supply
48 V
: Data
: Power
Pair 2
Outgoing cable to
patch panel: Pair 3 Pair 1 Pair 4
Data + power supply
RJ45 Connector 1 2 3 4 5 6 7 8
Twisted pairs cable

PoE injector exiting from the PoE
carries power (48 V)
to feed the data
230 V
■ Legrand services
The Relations Pro(1) service will work with you and guide you in setting
Switch up your VDI sites:
- help with sizing the installation
230 V
- on-site assistance for integrating products and making important
installations secure
Advisors are also available to answer all your technical questions
(1) 0810 48 48 48 (local call rate) Monday to Friday 0800 to 1800
Particular case of the 1

port PoE: Clips directly
onto a port on any patch
panel
A single cord is
necessary to connect it PoE injector
to a port on the switch
4 x RJ 45 connector
unit

1 inch = 25.4mm
105
LCS2 fibre optic
■ Quick crimping with kit Cat.No 0331 93 Technical characteristics

Types of connector - the kit is used for attaching the connectors to 900 μm fibre
- ST connector: Helical shape - average loss of a connection: 0.3 dB
locked by "push and turn" bayonet - ideal for high-speed systems: 10 Gb Ethernet provided with
type connector 50/125 μm connector
- Operating temperature: from 0 °C to 65 °C
- SC connector: Rectangular shape Advantages:
"push-pull" latch type - high quality finish
locking. Suitable for a large
number of active devices - no polishing: connectors pre-polished in factory
Recommended in the generic standards - no Epoxy type glue required
ISO/IEC 11801 and EN 50173 - easy connection
- no complex tools or consumables required: the termination
- LC connector: Rectangular shape is made in less than 3 minutes, and is very cost-effective
tab locking - practical and light kit
Half the size of a conventional
connector - crimping possible of both multimode and monomode fibres
The 6 essential steps for quick crimping

Step 1: Strip the fibre Step 2: Cleave the fibre Step 3: Inspect the fibre
Step 4: Insert the fibre Step 5: Align the fibre Step 6: Crimp the connector
■ New optical classes ISO 11801 2nd Ed. ■ Speed ensured by distance 850/1300 nm bandwid
(Mhz/km)
Parameters of the optical link (ISO 11801/EN 50173) ISO 11801-2 optic classes
Multimode Monomode
Parameter 850 nm 1 300 nm 1 310 nm 1 550 nm
1500 / 500
Fibre attenuation dB/km 3.5 max. 1.5 max. 1.0 1.0
OS1
Bandwidth MHz.km 200 min. 500 min. n/a n/a
Connector attenuation dB 0.75 max. 0.75 max. 0.75 max. 0.75 max. 500 / 500
Return loss dB 20 min. 20 min. 26 min. 26 min.
200 / 500
■ Typical layout of an optical link between 2 distribution blocks OM3
Table 2 RJ 45 sockets OM2

OM1
RJ 45 panel
2 Electrical signal
Copper/ Copper/optical
optical fibre switch fibre converter
Protocols Multimode fibre Monomode fibre

Optical fibre drawer
(length max.) OM 1 OM 2 OM 3 OS 1
Optical signal 10 Gb
Table 1 Ethernet 33 m 82 m 300 m 10 km
(S/L base)
Optical fibre drawer Ethernet Gb 550 m 550 m 550 m 2 km
(LX base)
1
Copper/optical Ethernet Gb
(SX base) 275 m 550 m 550 m -
Copper/ fibre converter
optical fibre switch Fast Ethernet 2000 m 2000 m 2000 m 2 km
Electrical signal
RJ 45 panel Ethernet 10 Mbps 2000 m 1514 m 1514 m -
RJ 45 sockets Desired perennity > 10 years 10 to 15 years > 15 years > 15 years
: Optical link
: Copper link
Market trend
➘ ➚➚ ➙➚ ➚
1 inch = 25.4mm
Certificate of conformity
Quality
confirmation
Legrand’s components, system and performance have been independently tested and
approved. The results are certified. Copies of certificates are available from your
Legrand consultant.
C AT EGORY 6 A 10 G , CL A S S E SF TP LINK C AT EGORY 6 A 10 G , CL A S S E F T P CH A NNEL
107
Certificate of conformity
Quality
confirmation
Legrand’s components, system and performance have been independently tested and
approved. The results are certified. Copies of certificates are available from your
Legrand consultant.
C AT E G O RY 6 , C L A S S E F / U T P C H A N N E L C AT E G O RY 6 , C L A S S E F / U T P L I N K
108
C AT E G O RY 5 , C L A S S E U T P L I N K C AT EGORY 5, CL A S S D U T P CH A NNEL
ETL test results available on request

for further information please contact us
109
Branch offices Area offices
7. SCO 1-2-3, 17. ABC Business Club 16,
19
Second Floor, Sector 17B,
7 Tagore Villa, Chakrata Road,
17
Chandigarh - 160 017.
Tel : (0172) 305 8631 / 32 / 33 / 34 / 35 Dehradun - 248 001.
8 18
21 20
Fax : (0172) 501 9008 Uttaranchal.
Tel : (0135) 271 5189 / 248 001
8. 507-510, Vth Floor, Soni Paris Point,
18. Cabin No.104/105,
9
15 Jai Singh Highway, Banipark,
14 25 Jaipur - 302 016. Trade Point,
10 6
Telefax : (0141) 511 3129 Ground Floor, Saran Chamber 1,
5, Park Road, Hazratganj,
24
16 9. 504, Sakar IV,
Lucknow - 226 001.
22
Opp. M. J. Library, Ellis Bridge,
11 Ahmedabad - 380 006. Gujarat Tel : (0522) 223 9044 / 7285
13 Tel : (079) 2658 6561 / 2 Fax : (0522) 223 9124
12 23 Fax : (079) 2658 6563
19. Cabin No. 9,
10. 402, Swastik Chambers, Second Floor,
Head office Near Ashwamegh Marriage Hall, Madhok Trade Centre,
Behind HP Petrol Pump,
1. 61 & 62, 6th Floor, Madhok Complex,
Off Karve Road, Erandwane,
Kalpataru Square, Kondivita Road, Ferozpur Road,
Pune - 411 004.
Off Andheri-Kurla Road, Andheri (E), Tel : (020) 6729 5600 / 601 Ludhiana - 141 001.
Mumbai - 400 059. Fax : (020) 6729 5604 Tel/Fax No.: (0161) 277 0301 / 304
Tel : (022) 3041 6200
Fax : (022) 3041 6201 11. IInd Floor, Al-Latheef Building, 20. House No. 97, Ground Floor,
Website : www.legrand.co.in 2/1, Union Street, Off. Infantry Road, Rajgarh Main Road,
Bangalore – 560 001. Opp. City Heart Nursing Home,
Regional sales offices Tel : (080) 2286 1081, 4113 3293 / 4 Guwahati - 781 007.
Fax : (080) 2286 1078 Tel : (0361) 245 8498
2. A-25, Mohan Co-operative
Industrial Estate, Mathura Road, 12. No. 36/2178, Syda Building, 2nd Floor,
21. 94, Udham Singh Sarani,
New Delhi - 110 044. Kaloor – Kadavanthra Road, Kaloor,
Kochi – 682 017. Ground Floor, Ashrampara,
Tel : (011) 2699 0028 / 29 / 30, 3990 2200
Fax : (011) 2699 0047 Tel : (0484) 234 2921, 658 0921 Siliguri - 734 001.
Fax : (0484) 233 3921 Tel : 94341 91635 / 98009 77780
3. Bhakta Towers, 2nd & 3rd Floor,
Plot No. KB 22, Salt Lake, Sector - 3, 13. B-15, Thirumalai Towers, 22. Prime Plaza, 2nd Floor,
Kolkata - 700 098. IV-D, Fourth Floor, 1st Main,
Tel : (033) 4021 3535 / 36 723, Avanashi Road, Girls High School Road,
Fax : (033) 4021 3537 Coimbatore – 641 018. Near PNB, Deshpande Nagar,
Tel : (0422) 650 2728, 222 3634 / 0283 Hubli - 580 029.
4. 34, 3rd Floor, Kalpataru Square,
Fax : (0422) 222 3164
Kondivita Road, Off Andheri-Kurla Road, Mobile Nos: 98807 64338 / 98807 64339
Andheri (East), 14. Plot No.95, II Floor, Shreyash Heights,
Mumbai - 400 059. Ramdas Peth, VIP Road, 23. Aparna Towers, 1st Floor,
Tel : (022) 3385 6200 Nagpur - 440 010. 2/3, Bypass Road,
Fax : (022) 3385 6201 Tel : (0712) 662 7857 / 58 Madurai – 625 010.
Fax : (0712) 662 7859 Telefax : (0452) 230 8414
5. Gee Gee Universal, 8th Floor, Door No. 2,
18/1 & 18/2, McNichols Road, Chetput, 15. 204-205, Megapolis Square, 24. 404, Eshwar Plaza,
Chennai – 600 031. 579, M G Road, Dwaraka Nagar, Main Road,
Tel : (044) 3024 7200, 2836 4165 / 67 / 68 Indore - 452 001. Vishakhapatnam – 530 020.
Fax: (044) 2836 4169 Tel : (0731) 393 1650 / 51 / 52
LCS2/5000/05/2013
Telefax : (0891) 663 9363
Fax : (0731) 393 1653
6. 205-208, 2nd Floor, Block - II,
White House, Kundan Bagh, Begumpet, 16. MF-2, Datta’s Lords House, 25. Plot No. 359,
Hyderabad – 500 016. Jammi Chettu Street, Saheed Nagar, 2nd Floor,
Tel : (040) 2341 4398 / 67 Vijayawada – 520 010. Bhubaneswar - 751 007.
Fax : (040) 6636 6974 Telefax : (0866) 669 9393 Tel : (0674) 254 0623
Technical assistance from Legrand

Telephonic technical assistance for selection
of products, technical information, guidance,
wiring diagrams and estimation is now made
available to you. Contact Legrand technical
assistance at the following telephone
numbers : (022) 3041 6258 / 00. Also you could
contact our regional offices:
New Delhi : Tel.: (011) 2699 0028, 3990 2200
Kolkata : Tel.: (033) 4021 3535 / 36
Mumbai : Tel.: (022) 3385 6200
Chennai : Tel.: (044) 3024 7200, 2836 4165 / 67 / 68
Hyderabad : Tel.: (040) 2341 4398 / 67
[email protected]

Voicedata PDF

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Voicedata PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Voicedata PDF

Uploaded by

Copyright:

Available Formats

LEGRAND CABLING SYSTEM 2

LCS2 fibre optic

Page Page Page Page Page Page

0090 00 0326 24 77 1 0330 72 81 3 0335 33 74 2 0462 31 91 1 0464 80 89 1

0515 01 70 4 0518 57 63 1 0765 91 66 10 5727 76 82 1/20 5757 11 94 10/100 6000 00

OFFICE Area distribution box RJ 45 socket Access control

Cabling unit Fibre optic socket

CAMPUS AVS socket DLP trunking system

Wi-Fi access point RJ 45 with controlled

HOTEL RJ 45 sockets 45° Retractable RJ 45 socket

Patch cord 19” wall-mounting

Legrand systems performance of the installation, performance

Performance of the transmission

COMPONENT LINK MEASUREMENT

Category 6A STP Class EA / cat. 6A

Return Loss (dB) LCS2 17.05 26.59 16.4 22.1

Next (dB) Resistance to LCS2 37.46 56.93 38.1 54

Return Loss (dB) LCS2 29.8 29.8 29.8 38.8

Next (dB) Resistance to LCS2 51.3 51.3 51.3 53.9

Patch cords and cables

the installation of the link from the patch panel to the RJ 45

Separate and insert

Add the upper part Turn to guarantee

Panels provided with

The new LCS2

Telephone block FC type video broadcast block LC fibre optic cassette

Legrand cat. 6 F/UTP cable. Legrand cat. 6 SF/UTP cable.

Legrand cat. 6A F/UTP cable.

Individually tested cords

Tests on all parameters

LCS2 FIBRE OPTIC

and ease in coiling accessibility, coiling the fibres ensured by the

LCS2 FIBRE OPTIC

Easier cable management. Total accessibility

Can take all

LC connector block. SC connector block. ST connector block.

and performance for links within buildings or between buildings,

Connection takes just 3 minutes

Inspect the fibre Insert the fibre

Align the fibre Crimp the fibre

fibre optic reliability. This minimises the risk of malfunction

LCS2 FIBRE OPTIC

LCS2 ENCLOSURES AND CABINETS

cables and cords feedthrough panels for perfect organisation of

LCS2 ENCLOSURES AND CABINETS

assembly to the removable side and rear panels

LCS2 ENCLOSURES AND CABINETS

Total accessibility Equipotential bonding

Two 600-mm-wide enclosures Two 800-mm-wide enclosures

accessibility panels, but also thanks to the high pre-cuts and

LCS2 ENCLOSURES AND CABINETS

Doors and panels with keyless

Cable entry Cable ducting

high-quality finish facilitate access for quick installation

LCS2 ENCLOSURES AND CABINETS

Flexible cable entries

complete ease centralised, copper and fibre optic are in a single

2 blocks of 6 connectors can be fitted