Dryer DCU 7330 X

1 EN
Read this manual prior to initial operation of the product!
Dear Customer,
We hope that your product, which has been manufactured in modern facilities and
passed through a strict quality control procedure, will give you very good results.
We advise you to read through this manual carefully before using your product and keep
it for future reference.

This User Manual will

• Help you use your machine in a fast and safe way.
• Read the User Manual before installing and starting your product.
• In particular, follow the instructions related to safety.
• Keep this User Manual within easy reach for future reference.
• Please read all additional documents supplied with your product.
Remember that this User Manual is also applicable for several other models.
Explanation of symbols
Throughout this User Manual the following symbols are used:

A Important safety information. Warning for hazardous situations with regard to life
and property.
B Caution; Warning for supply voltage.

Caution; Warning for fire hazard.

Caution; Warning for hot surfaces.

Read the instructions.

C Useful information. Important information or useful hints about usage.

2960310535_KM/221211.1055

This appliance’s packaging material is recyclable. Help recycle it and protect the
environment by dropping it off in the municipal receptacles provided for this purpose.
Your appliance also contains a great amount of recyclable material. It is marked with
this label to indicate the used appliances that should not be mixed with other waste.
This way, the appliance recycling organised by your manufacturer will be done under
the best possible conditions, in compliance with European Directive 2002/96/EC on
Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used
appliance collection points closest to your home. We thank you doing your part to protect the
environment.
 1 Important safety information
This section includes safety information or adaptors to connect the dryer to
that will help protection from risks of power supply in order to decrease the
personal injuries or materialistic damages. risk of electric shock.
Failure to follow these instructions • Do not make any changes on the plug
shall cause any warranty and reliability supplied with the product. If it is not
commitment to become void. compatible with the socket, have a
qualified electrician change the socket
General safety with a suitable one.
• Never place the machine on a carpet- • Items cleaned or washed with gasoil/
covered floor, otherwise, lack of airflow fuel oil, dry-laundry solvents and other
beneath the machine may cause combustible or explosive materials as
electrical parts to overheat. This will well as the items that are contaminated
cause problems with your machine. or spotted with such materials should
• If the power cable or mains plug is not be dried in the product since they
damaged, you must call Authorised emit flammable or explosive vapor.
Service Agent for repair. • Do not dry items cleaned with industrial
• The product should not be plugged chemicals in the dryer.
in during installation, maintenance • Do not dry unwashed items in the dryer.
and repair works. Such works should • Items soiled with cooking oils,
always be made by the technical acetone, alcohol, fuel oil, kerosene,
service. Manufacturer shall not be held stain remover, turpentine, paraffin and
responsible for damages arising from paraffin removers must be washed
processes carried out by unauthorised in hot water with plenty of detergent
persons. before being dried in the dryer.
• Connect the product to a grounded • Garments or pillows bolstered with
outlet protected by a fuse of suitable rubber foam (latex foam), shower
capacity as stated in the technical bonnets, water resistant textiles,
specifications table. materials with rubber reinforcement and
• Operate your product at temperatures rubber foam pads should not be dried
between +5°C and +35°C. in the dryer.
• Do not use electrical devices in the • Do not use fabric softeners and
product. anti-static products unless they are
• Do not connect the air exit of the recommended by the manufacturers of
product to the chimney holes which the fabric softener or the product.
are used for the exhaust fumes of the • Oil-affected items can ignite
devices operating with gas or other spontaneously, especially when
types of fuel. exposed to heat sources such as in
• You must provide enough ventilation a tumble dryer. The items become
in order to prevent gases exiting from warm, causing an oxidation reaction
devices operating with other types of in the oil. Oxidation creates heat. If the
fuels including the naked flame from heat cannot escape, the items can
accumulating in the room due to the become hot enough to catch fire. Piling,
back fire effect. stacking or storing oil-affected items
• Always clean the lint filter before or after can prevent heat from escaping and so
each loading. create a fire hazard.
• Never operate your dryer without the • If it is unavoidable that fabrics that
lint filter installed. contain vegetable or cooking oil or
• Do not allow fibre, dust and dirt have been contaminated by hair care
accumulation around the exhaust exit products be placed in a tumble dryer
and at adjacent areas. they should first be washed in hot water
• Power cable plug must be within easy with extra detergent - this will reduce,
reach after installation. but not eliminate, the hazard.
• Do not use extension cords, multi-plugs
3 EN
• This product must be grounded. Turn off the machine, turn off and
Grounding installation decreases the contact an authorised service agent.
risk of electric shock by opening a path • Do not stop the dryer before the drying
with low resistance for the electricity cycle comes to an end unless you will
flow in case of a malfunction or failure. remove all laundry from the dryer fast
Power cable of this product is equipped in order to lay them and dissipate the
with a conductor and a grounding heat.
plug that allows for grounding the • Remove the door of the drying
product. This plug must be installed compartment before decommissioning
appropriately and inserted into a socket or disposing of the product.
which is grounded in accordance with • The final step of the drying cycle (cool-
the local laws and regulations. down cycle) occurs without applying
• Do not install the product behind a door heat to ensure that the items are left
with a lock, sliding door or a door that at a temperature that will not damage
has a hinge against the hinge of the them.
dryer. • Fabric softeners or similar products
• Do not install or leave this product should be used as specified by the
in places where it will be exposed to fabric softener instructions.
outdoor conditions. • Underwear that contains metal
• Do not tamper with the controls. reinforcements should not be placed in
• Do not perform any repair or part a dryer. Damage to the dryer can result
replacing procedures on the product if metal reinforcements come loose
even if you know or have the ability to during drying.
perform unless it is clearly suggested • Check all garments for forgotten
in the operating instructions or the lighters, coins, metal pieces, needles,
published service manual. etc. before loading.
• Inside and exhaust duct of the product • Remove all objects from pockets such
must be cleaned by the qualified as lighters and matches.
service personnel periodically. • At times when your dryer is not in
• Wrong connection of grounding use or after the laundry is taken out
conductor of the product can cause following the completion of drying
electric shock. If you have any suspect process, turn off by using the On/
about the grounding connection, have Off button. In cases when the On/
it checked by a qualified electrician, Off button is on (while the dryer is
service representative or service energized), keep the door of the dryer
personnel. closed.
• Do not reach into the machine when Intended use
the drum is spinning. • This product has been designed for
• Unplug the machine when it is not in domestic use. It should not be used for
use. other purposes.
• Never wash down the appliance with • Use the product only for drying laundry
water! There is the risk of electric shock! that are marked accordingly.
Always disconnect by unplugging from • Dry only those articles in your product
the mains before cleaning. that are stated in this manual.
• Never touch the plug with wet hands. • This product is not intended to be
Never unplug by pulling on the cable, used by persons with physical, sensory
always pull out by grabbing the plug or mental disorders or unlearned
only. Do not operate the machine if the or inexperienced people (including
power cable or plug is damaged! children) unless they are attended by
• Never attempt to repair the machine a person who will be responsible for
yourself, otherwise, you will be putting their safety or who will instruct them
your life and others’ lives in danger. accordingly for use of the product.
• For malfunctions that cannot be solved
by following the information given in the
safety instructions:
4 EN
Children’s safety
• Electrical appliances are dangerous for
the children. Keep children away from
the machine when it is operating. Do
not let them tamper with the machine.
• Packaging materials are dangerous to
children. Keep the packaging materials
out of reach of children or dispose
them by classifying according to waste
directives.
• Do not allow children sit/climb on or
enter in the product.
• Children should be supervised to
ensure that they do not play with the
product.
• Close the loading door when you leave
the area where the product is located.

5 EN
2 Installation
Refer to the nearest Authorised Service
Agent for installation of your product.
C Preparation of location and electrical
installation for the product is under
customer’s responsibility.
BInstallation and electrical connections
must be carried out by a qualified
personnel.
A Prior to installation, visually check if the
product has any defects on it. If so, do
not have it installed. Damaged products
will cause risks for your safety.
Appropriate installation location
• Install the product in an environment A Make sure that you have removed
which has no risk of freezing and is in a the transportation safety assembly
stable and level position. (nylon+styrofoam pieces) before using
• Operate your product in a well the product for the first time. Do not
ventilated, dust-free environment. leave any items inside the drum.
• Do not block the air ducts in front of Under counter installation
and under the product with materials • A special part (Part no. 297 360 0100)
such as long pile rugs and wooden replacing the top trim must be provided
bands. and installed by the Authorised Service
• Do not place your product on a long Agent in order to use the machine under
pile rug or on similar surfaces. a counter or in a cupboard. It should
• Do not install the product behind a door never be operated without the top trim.
with a lock, sliding door or a hinged • Leave at least 3 cm of space between
door which can strike the product. the side and rear walls of the product
• Once the product is installed, it should and the walls of the counter/cupboard
stay at the same place where its when installing your product under a
connections have been made. When counter or in a cupboard.
installing the product, make sure Mounting over a washing machine
that the rear wall of it does not touch • A fitting device should be used between
anywhere (tap, socket, etc.) and also the two machines when installing above
pay attention to install the product at a a washing machine. The bracket (Part
place where it will stay permanently. no. 297 720 0200 white/297 720 0500
BDo not place the product on top of the grey) must be installed by the Authorised
power cable. Service Agent.
• Keep at least 1.5 cm distance to walls • Place the product on a firm floor. If
of other furniture. it will be placed on top of a washing
Removing the transportation machine, the approximate weight of
safety assembly both machines may reach 180 kg when
ARemove the transportation safety they are full. Therefore, the floor must be
assembly before using the product for capable of carrying the load on it!
the first time. Connection to water drain;
1. Open the loading door. In products equipped with a condenser unit
2. There is a nylon bag inside the drum the water accumulated during the drying
that contains a piece of styrofoam. Hold cycle is collected in the water tank. You
it from its section marked with XX. should drain the accumulated water after
3. Pull the nylon towards yourself and each drying cycle.
remove the transportation safety You can directly send the accumulated
assembly. water out through the water drain hose
supplied with the machine instead of

6 EN
periodically draining the water collected in CNever unscrew the adjustable feet from
the water tank. their housings.
Connecting the water drain hose; Electrical connection
Connect the machine to a grounded outlet
protected by a fuse of suitable capacity as
stated in the technical specifications table.
Our company shall not be liable for any
damages that will arise when the machine
is used on a circuit without grounding.
• Connection must comply with national
regulations.
• If the current value of the fuse or
breaker in the house is less than 10
Amps, have a qualified electrician install
a 10 Amp fuse.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or
breaker protection are specified in the
“Technical Specifications” section.
1. Remove the hose on the machine by • The specified voltage must be equal to
pulling it out from its end. Do not use your mains voltage.
any tools to take out the hose. • Do not make connections via extension
2. Connect the special drain hose supplied cables or multi-plugs.
with the machine to the pipe fitting. • The main fuse and switches must have
3. The other end of the drain hose can be a contact distance of minimum 3 mm.
directly connected to the wastewater BDamaged power cable must only be
drain or to the washbasin. The fitting replaced by a qualified electrician.
must always be secured in all types of BIf the product is faulty, it must not be
connections. Your house may be flooded operated unless it is repaired! There is
if the hose gets out of its housing during the risk of electric shock!
water discharge.
Important: First use
• The hose should be attached to a height • To have the product ready for operation
of maximum 80 cm. before calling the authorised service
• You must be careful not the pinch or agent, make sure that its location
bend the hose. and power supply installations are
• The end of the hose should not be bent, appropriate. If they are not, call a
it should not be stepped on and it must qualified electrician to have any
not be folded between the drain and the necessary arrangements carried out.
machine. • Make sure that the power connections
of the product are in accordance
Adjusting the feet with the instructions given in relevant
In order to ensure that your machine chapters of this manual.
operates more silently and vibration-free, it
must stand level and balanced on its feet. Disposing of packaging material
Balance the machine by adjusting the feet. Packaging materials are dangerous to
Rotate the feet to adjust until the machine children. Keep packaging materials in
stands level and firmly. a safe place out of reach of children.
Packaging materials of your product are
manufactured from recyclable materials.
Sort and dispose of them in accordance
with recycled waste instructions. Do not
dispose of them with normal domestic
waste.

7 EN
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and
chimney connections.
3. Drain water remained in the machine
completely before transportation.
Disposing of the old machine
Dispose of your old machine in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how
to dispose of your machine.
Before disposing of your old machine,
cut off the power cable plug and make
the loading door lock unusable to avoid
dangerous conditions to children.

Technical specification
EN 2
Height (adjustable) 84.6 cm
Width 59.5 cm
Depth 53 cm
Capacity (max.) 7 kg
Weight (net) 36 kg
Voltage
Rated power input See type label
Model code
Type label is located behind the loading door.

8 EN
 3 Initial preparations for drying
Things to be done for energy
saving:
• Make sure that you operate the product
at its full capacity but pay attention to not
A B C D
exceeding it. Low
• Spin your laundry at the highest speed
possible when washing them. Thus,

l n m
the drying time is shortened and energy
consumption is decreased.
• Pay attention to dry same types of laundry
together.
• Follow the instructions in the user manual
for programme selection.

o p q
• Make sure that sufficient clearance is
provided at the front and rear side of the
dryer for air circulation. Do not block the
grill at the front side of the product.
• Do not open the door of the machine
during drying unless necessary. If you must
certainly open the door, pay attention not to
keep it open for a long time.
• Do not add new (wet) laundry during drying. Laundry unsuitable for drying in
• Lint and fibres released from the laundry to the machine
the air during the drying cycle are collected • Laundry items with metal attachments such
in the “Lint Filter”. Make sure that you clean as belt buckles and metal buttons can
the filters before or after each drying. damage your dryer.
• In models with condenser, make sure that • Do not dry items such as woollens, silk
you clean the condenser regularly at least garments and nylon stockings, delicate
once every month or after every 30 drying embroidered fabrics, laundry with metal
cycles. accessories and items such as sleeping
• In vented models, follow the chimney bags in the dryer.
connection rules in the user manual and • Laundry made of delicate and valuable
pay attention to the chimney cleaning. fabrics as well as lace curtains can be
• Ventilate the room, where the dryer is creased. Do not dry them in the dryer!
located, well during drying. • Do not dry items made of hermetic fibres
• For power saving in models with lamps, at such as pillows and quilts in the dryer.
times when your dryer is not in use, keep • Laundry made of foam or rubber will be
the door closed if the On/Off button is deformed.
pressed (if the dryer is energized). • Do not dry laundry containing rubber in the
Laundry suitable for drying in the dryer.
machine • Do not dry laundry exposed to petroleum,
C Always follow the suggestions on the oil, combustible or explosive agents in the
laundry labels. Dry only the laundry having a dryer even if they are washed beforehand.
label stating that they are suitable for drying • Overly wet laundry or laundry with dripping
in a dryer and make sure that you select water must not be put into the dryer.
the appropriate programme. • Items cleaned or washed with gasoil/fuel oil,
dry-laundry solvents and other combustible
or explosive materials as well as the items
that are contaminated or spotted with such
materials should not be dried in the product
since they emit flammable or explosive
vapor.
• Do not dry items cleaned with industrial
chemicals in the dryer.
• Do not dry your unwashed laundry in the
dryer.
• Items soiled with cooking oils, acetone,

9 EN
 alcohol, fuel oil, kerosene, stain remover, A Consider the information in the
turpentine, paraffin and paraffin removers "Programme Selection Table". Always start
must be washed in hot water with plenty of the programme in accordance with the
detergent before being dried in the dryer. maximum load capacity.
• Garments or pillows bolstered with rubber C Adding laundry to the machine more
foam (latex foam), shower bonnets, water than the level shown in the figure is not
resistant textiles, materials with rubber recommended. Drying performance will
reinforcement and rubber foam pads should degrade when the machine is overloaded.
not be dried in the dryer. Furthermore, your dryer and your laundry
• Do not use fabric softeners and anti-static can be damaged.
products unless they are recommended by C Place your laundry into the drum loosely so
the manufacturers of the fabric softener or that they will not get tangled.
the product. CLarge pieces (E.g.: bed sheets, quilt covers,
• Do not dry the underwear reinforced with large tablecloths) may bunch-up. Stop the
metal parts in the dryer. If these metal dryer 1-2 times during drying process to
reinforcements loosen and break during separate bunched-up laundry.
drying, they will damage your dryer. Following weights are given as examples.
Preparing laundry for drying
• Check all laundry items before loading them Approximate
into the product to make sure that there are Home articles weights (g)
no lighters, coins, metal items, needles and
etc. in their pockets or on any part of them. Cotton quit covers (double) 1500
• Fabric softeners and similar products must Cotton quit covers (single) 1000
be used in accordance with the instructions
Bed sheets (double) 500
of the manufacturer of the relevant products.
• All laundry must be spun at the highest spin Bed sheets (single) 350
speed that your washing machine allows for Large tablecloths 700
the laundry type.
• Laundry may be tangled after washing. Small tablecloths 250
Separate your laundry before placing them Tea napkins 100
into your dryer.
• Sort your laundry according to their types Bath towels 700
and thicknesses. Dry the same type of Hand towels 350
laundry together. E.g.: fine kitchen towels
and table cloths dry faster than the thick bath Approximate
Garments weights (g)
towels.
Correct load capacity Blouses 150
Cotton shirts 300
Shirts 200
Cotton dresses 500
Dresses 350
Jeans 700
Handkerchiefs (10 pieces) 100
T-Shirts 125

10 EN
Loading the laundry
1. Open the loading door.
2. Place the laundry in the machine without
compressing.
3. Push the loading door to close.
A Ensure that no items are caught in the door.

11 EN
 4 Selecting a Programme and Operating Your Machine
Control panel

1 2 3 4 5

Shirts Jeans Daily

Xpress 35 Iron Dry

Synthetics
Wool Cupboard
Refresh Dry
Spin / Time
Mix Iron Dry
Cupboard
Start/Pause Sport Dry
Cottons
Babycare Extra Dry
Time Delay

Delicates Freshen Up On / Off

Cancel Press
& Hold 3 sec.
Timer
Programmes

Buzzer Dryness Anti-

Cancel Level Creasing

9 8 7 6

1. Washing machine spin speed*/ Timer pro- 5. On/Off button

gramme selection Used to turn on and off the machine.
Spin speed used to spin the laundry in the 6. Anti-creasing
washing macthine / Indicates the time for Prevents the laundry from creasing after the
timer programs. machine completes its programme.
2. Display 7. Dryness level
Indicates the status of the machine. Used to adjust the required dryness level.
3. Start/Pause/Cancel button 8. Cancel audio warning
Used to start, pause or cancel the Used to cancel the audio warning given at
programme. the end of the programme.
4. Programme selection knob 9. Time delaying buttons
Used to select a programme. Used to set the time delay.

Spin speed / Timer programmes  Child-proof lock warning icon

Operation icon Time delaying mode
Pause icon Door open warning icon
Water tank full warning icon Anti-creasing mode
Filter cleaning warning icon Audio warning level / Cancel audio warning
Condenser cleaning warning icon Drying degree
Remaining time indicator Anti-creasing is activated

 Spin speed is used to show the remaining time more accurately.

It does not affect the performance of your machine.

12 EN
 Cottons Synthetics Express Timer Ventilation Anti Iron dry Ekstra Cupboard Cupboard
35’ programs Creasing dry dry dry plus

Filter Jeans Shirt Buzzer/ On/Off Start Tank Child-proof Daily Dryness
cleaning cancel pause full lock Level
cancel

Babycare Sport Spin Mixed Timer Wool Drying Drying Delicates End/anti-
Delay Refresh Rack creasing

Preparing the machine C For further programme details, see,

1. Plug in your machine. "Programme Selection Table"
2. Place the laundry in the machine. Main programmes
3. Press the “On/Off” button. Depending on the type of laundry, the
C Pressing the “On/Off” button does not following main programmes are available:
necessarily mean that the programme •Cottons
has started. Press “Start/Pause/ You can dry your durable laundry with this
Cancel” button of the machine to start programme. Dries at high temperature. It
the programme. is recommended to use for your cotton
Programme selection items (such as bed sheets, quilt cover,
Decide the appropriate programme from underclothing, etc.).
•Synthetics
the table below which includes drying
temperatures in degrees. Select the You can dry your less durable laundry
desired programme with the programme with this programme. It dries at a lower
selection knob. temperature compared to the cottons
programme. It is recommended for your
Drying at high synthetic laundry (such as shirts, blouses,
temperature only for synthetic/cotton blended laundry, etc.).
cotton laundry. Thick C Do not dry curtains and lace in your
and multi layered machine.
Extra dry laundry (E.g.: towels, Special programmes
linens, jeans) are dried For special cases, there are also extra
in a way that they do programmes available:
not require ironing C Additional programmes may differ
before placing in the according to the model of your
wardrobe. machine.
•Xpress 35
Normal laundry (E.g.: You can use this programme to dry your
tablecloths, underwear) cotton laundry that you have spun at high
Cupboard are dried in a way that speeds in your washing machine.This
dry they do not require program dries 1,5 kg cotton laundry (2
ironing before placing Shirts / 5 T-shirts) in 35 minutes.
in the wardrobe. C To obtain better results from your
Normal laundry (E.g., dryer, your laundry must be washed
Shirts, dresses) are at suitable programmes and spun at
Iron dry dried ready to be the recommended spin speeds in the
ironed. washing machine.

13 EN
•Shirt this programme.
This programme dries the shirts more •Timer programs
sensitively and creases them less and
thus, helps to iron them more easily.
C There may be a little humidity on your
shirts at the end of the programme. We
recommend you not to leave the shirts
in the dryer.
•Jeans
You can use this programme to dry your
jeans that you have spun at high speeds in
your washing machine.
C Review the relevant section in the You can select one of the 10 min., 20
programme table. min., 30 min., 40 min., 50 min., 60 min.,
•Mixed 80 min., 100 min., 120 min., 140 min.
Used to dry synthetic and cotton laundry and 160 min. timer programmes to
that do not release colour. Used for achieve the desired final drying level at
laundry that is suitable for drying. low temperatures. Programme dries at
•Sport the selected time regardless of the drying
Used to dry the laundry that are made temperature.
of synthetic, cotton or mixed fabrics and
have a tag indicating that they are suitable Time display
for drying. The display shows the time remaining
•Wool Refresh
You can use this function to ventilate for the programme to complete while a
and soften your woolen laundry that can programme is running. Time is displayed
be washed in the washing machine. Do in hours and minutes as “02:30”. The
not use this function to dry your laundry exemplary display image shows the dryer
completely. Take out your laundry and when it is running and child-proof lock is
ventilate them immediately after the active.
program is over. C Programme duration may differ from the
•Daily values in the consumption table subject
This programme is used to dry cottons to the changes in the water hardness
and synthetics daily, and lasts for 1 hour. and temperature, ambient temperature,
•Babycare type and amount of laundry, auxiliary
This programme is used for baby clothes functions selected, and changes in the
that bear machine dryable approval on its supply voltage..
label.
•Delicates
You can dry your highly delicate laundry
that are suitable for drying or laundry which
is advised to be hand-washed at a lower
temperature.
C It is recommended to use a cloth bag
to prevent certain delicate laundry from
getting creased or damaged. Take your
laundry immediately out of the dryer
and hang them after the programme
ends in order to prevent them being
creased.
•Freshen Up
Only ventilation is performed for 10
Tminutes without blowing hot air. You can
air your clothes that have been kept at
closed environments for a long time and
deodourise unpleasant odours thanks to
14 EN
Programme selection and consumption table
Programme table
EN

Spin speed in Approximate

Capacity washing machine amount of Drying time
Programs (kg) remaining (minutes)
(rpm) humidity

Cottons / Coloreds
A Extra dry 7 1000 % 60 135

A Cupboard dry 7 1000 % 60 125

A Iron dry 7 1000 % 60 105

Xpress 35’ 1.5 1200 %50 35
Shirt 1.5 1000 %50 40
Jeans 4 1200 %50 90
Delicates 1.75 600 %40 45
Mixed 4 1000 %60 87
Sport 4 1000 %60 92
Wool Refresh 1.5 600 %50 6
Daily 4 1200 %50 72
Babycare 3 1000 %60 80
Synthetics
B Cupboard dry 3.5 800 % 40 53
Energy consumption values

Capacity Energy consumption value Energy

Programs (kg) kWh per year rating star

Cottons-Extra Dry* 7 313 2

* : Energy Label standard program (AS/NZS 2442)

All values given in the table have been fixed according to standard laboratory conditions.
These values may deviate from the table according to the laundry type, laundry spin
speed, environmental conditions and voltage fluctuations.

15 EN
Auxiliary function Changing the contrast
Audio Warning Contrast can be adjusted in order to
make the symbols on the display appear
clearer. It may particularly be necessary to
Cancel Audio warning Audio warning Audio warning change the contrast setting of the display
audio warning level 1 level 2 level 3
when the dryer is installed over a washing
Your dryer will give an audio warning when machine.press and
the programme comes to an end. If you Press and hold the Spin Speed/Time
do not want to hear this buzzing or want button for 3 seconds.
to change the volume level, you need to When the contrast is changed at the end
press the “Volume level” button. No audio of 3 seconds, all symbols on the display
warning will be given when “x” appears on will become visible for 3 seconds in order
the screen. to indicate that the process is complete.
C You can select this function either Perform the same procedure to revert
before or after the programme starts. back to the previous contrast setting.

Drying degree Warning indicators

C Warning indicators may differ according
to the model of your machine.
Filter cleaning

Used to adjust the required dryness level.

More drying is performed compared to
the default settings when “+” sign appears
and less drying is performed when “-” sign
appears. Programme duration can change A warning symbol will appear to remind
depending on the selection. filter cleaning after the programme finishes.
A This function must be selected before C f the filter cleaning symbol flashes
the programme starts. continuously, please refer to
“Suggested solutions for problems”.
Anti-creasing Water tank

A warning symbol will turn on at the end

of the programme or when the tank is full
with water. The machine stops operating
if the warning symbol turns on when a
programme is running. To restart the
A 2-hour anti creasing programme to machine, please drain the water in the
prevent laundry from creasing will be water tank. Press “Start/Pause/Cancel”
activated if you do not take the laundry button to start the programme after you
out after the programme is over. This have emptied the water tank. The warning
programme rotates the laundry in symbol turns off and the programme
600-second intervals to prevent creasing. resumes operating.
Press “Anti-creasing” button to activate. Cleaning the condenser
Anti-creasing is activated but the
programme is running in the first
exemplary figure. Drying is over and the
first step of anti-creasing has started in the
second figure.

16 EN
Warning symbol turns on with certain set the desired time delay.
intervals to remind that the condenser 3. Press “Start/Pause/Cancel” button. The
needs cleaning. Time delay symbol lights up. Pause
Door open symbol fades. Start symbol lights up.
4. The “:” in the middle of the displayed
time delay will start flashing.
Canceling the time delay
If you want to cancel the time delay
countdown and start the programme
immediately:
Dryer door open symbol lights up. 1. Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme.
2. Then, press “Start/Pause/Cancel”
button to start the desired programme.
Starting the programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. “Start/Pause” symbol will light up
to indicate that the programme has
Time delay started and “:” symbol between the
With the “Time delay” function you can remaining time will continue flashing.
delay the programme start up to 24 hours.
1. Open the loading door and put the Progress of programme
laundry in.
2. Set the drying programme and spin
speed, and if required, select the
auxiliary functions. Anti-
Drying
3. Press “Time delaying” buttons “+” and Wardrobe
(Extra) creasing
“-” to set the desired time delay. The Iron Ventilation
time delay symbol will flash. The progress of a running programme is
4. Press “Start/Pause/Cancel” button. shown through a number of symbols on
Then the time delay starts to count the screen.
down. The Time delay symbol lights up. At the beginning of each programme
Start symbol lights up. step, the relevant symbol in the series
The “:” in the middle of the displayed time of symbols will light up and thus, all
delay will start flashing. symbols will remain lit up at the end of
More laundry may be loaded or taken out the programme. The symbol that is lit up
during the time delay period. At the end of at the far right of the series of symbols
the time delay countdown process, time indicates the step that is being carried out.
delay symbol fades, drying process starts “Drying”:
and the programme duration is displayed. - Lights up in all programmes apart from
The time on the display is the total of drying and ventilation.
normal drying time and delay time. “Iron Dry”:
Time delay is started by pressing the start/ - Starts to illuminate when the drying
pause/cancel button in the exemplary degree reaches “iron dry” step and remains
figure. illuminated until the next step.
“Cupboard Dry”:
Changing the delay time Starts to illuminate when the drying degree
If you want to change the time during the reaches “wardrobe dry” step, and remains
countdown: illuminated until the next step.
1. Press “Start/Pause/Cancel” button for “Extra Dry”:
3 seconds to cancel the programme. Starts to illuminate when the drying degree
Time delay function must be set again reach to “wardrobe dry extra” step.
for the required time. “Ventilation”:
2. Press Time delay buttons “+” or “-” to - Illuminates when the programme ends.

17 EN
C Anti-creasing icon will light up at the Therefore, it is recommended to add
end of the programme if anti-creasing laundry before the drying programme
function is active. has started.
Changing the programme after the C If you select a new programme by
programme has started turning the programme selection knob
You can use this feature to dry your laundry in a while your machine is in standby,
different program after your machine has started then the current program is cancelled
to run. and new programme information is
displayed.

Child-proof lock
There is a child-proof lock to prevent
any programme interruption due to the
pressing of button while the programme is
running. The loading door and all button
except the “On/Off” button on the panel
For example; are deactivated when the child-proof lock
Press and hold the “Start/Pause/Cancel” is active.
button for about 3 seconds to “Cancel” In order to activate the child-proof lock,
the programme in order to select “Extra press on the “audio warning” and “anti-
Dry” programme instead of “Iron Dry” creasing” buttons simultaneously for 3
programme. Select the “Extra Dry” seconds.
program by rotating the program knob. To start a new programme after the
Press “Start/Pause/Cancel” button to start programme is over or to interrupt the
the program. programme, the child-proof lock should be
C If you select a new programme by deactivated. Press the same buttons for
turning the programme selection knob 3 sec. again to deactivate the child-proof
while your machine is running, then the lock.
current program is cancelled and new Lock symbol will appear on the screen
programme information is displayed. when the child-proof lock is activated.
Adding/removing laundry in
standby mode
In order to add or take out laundry after
the start-up of the programme;
1. Press the “Start/Pause/Cancel” button C Child-proof lock will also be deactivated
to switch the machine to “Pause” when the machine is restarted by
mode. Drying process will stop. pressing the on/off button.
2. Open the door at Pause position and When the child-proof lock is activated:
close it again after adding or taking out • Display icons will not change even if the
laundry. position of programme selection knob
3. Press “Start/Pause/Cancel” button to is changed while the machine is running
start the program. or in halt.
C Any laundry added after the drying • If the child-proof lock is deactivated
process was started may cause the after changing the position of the
already dried clothes in the machine programme selection knob while your
intermingle with wet clothes and the machine is running, your machine stops
result will be wet laundry after the and new programme information is
drying process is over. displayed
CLaundry may be added or taken out
as much as desired during a drying
process, but as this process will
interrupt drying continuously, it will
extend the program duration and
increase energy consumption.
18 EN
Ending the programme through
canceling
A new program can be selected and
started after “Program cancel” is activated
in order to change the drying program.
To cancel any selected programme:
Press “Start/Pause/Cancel” button for
about 3 seconds. “Lint filter cleaning” and
“Water tank” warning symbols light up and
“End” label appears on the screen as a
reminder at the end of this period.
A As the inside of the machine will be
excessively hot when you cancel the
program while the machine is running,
activate the ventilation program to cool
it down.

C If you change the position of

programme selection knob while your
machine is running, then the machine
stops, current programme is cancelled
and new programme information is
displayed.
End of programme
“Filter cleaning” and “Water tank” warning
symbols light up and “End” label appears
on the screen in the programme follow-
up indicator when the programme ends.
The door can be opened and the machine
becomes ready for a second cycle.
Press “On/Off” button to turn off the dryer.
C When selected, the 2-hour anti creasing
programme will be activated to prevent
laundry from creasing if you do not take
the laundry out after the programme
has come to an end.
C Clean the filter after each drying (please
see, Filter cleaning).
C Drain the water tank after each drying
(please see, Water tank)

19 EN
 5 Maintenance and cleaning
Filter Cartridge / Door Inner
Surface
Lint and fibres released from the laundry to
the air during the drying cycle are collected
in the “Filter Cartridge”.

C Such fibre and lint are generally formed Sensor

during wearing and washing.
C Always clean the filter and the inner
surfaces of the cover after each drying
process.
C You can clean the filter and filter area by
vacuum cleaner.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up
and open the filter.
3. Clean lint, fibre, and cotton raveling by
hand or with a soft piece of cloth. There are humidity sensors in your dryer
4. Close the filter and place it back into its that detect whether the laundry is dry or
seat. not.
C Clogging may arise on the filter surface To clean the sensor:
after using your machine for some time; 1. Open the loading door of the dryer.
if this occurs, wash the filter with water 2. Allow the machine to cool down if
and dry it before using again. drying has been carried out.
3. Wipe the metal sensors with a soft
cloth, dampened with vinegar and dry
them.
C Clean metal sensors 4 times a year.
A Never use solvents, cleaning agents
or similar substances when cleaning
since these materials can cause fire and
explosion!

C Clean the entire inner surface of the

cover and door gasket.

20 EN
Water tank; drying cycles or once a month.
The moisture in the damp laundry is taken To clean the condenser:
from the laundry and condens ed. Drain 1. If a drying process has been carried out,
the water tank after each drying cycle or open the door of the machine and wait
during drying when “Water tank” warning until it cools down.
light turns on.
A Condensed water is not drinkable!
A Never take out the water tank when the
programme is running!
If you forget to drain the water tank, your
dryer will stop during the following drying
cycles when the water tank is full and the
“Water tank” warning light will turn on. If
this is the case, press the “Start/Pause/
Cancel” button to resume the drying cycle
after draining the water tank. 2. Unlock the 2 condenser locks after
*To drain the water tank: opening the kick plate.
1-Pull the drawer and remove the water
tank carefully.

2-Drain the water in the tank 3. Pull out the condenser.

3-If there is lint accumulation in the funnel

of the water tank, clean it under running
water.
4-Place the water tank into its seat.
For the condenser;
Hot and humid air in the condenser is
cooled with the cold air from the room.
Thus, the humid air circulating in your
dryer is condensed and then pumped into
the tank.
C Clean the condenser after every 30

21 EN
4. Clean the condenser by applying
pressurized water with a shower
armature and wait until the water
drains.

5. Place the condenser in its housing.

Fasten the 2 locks and make sure that
they are seated securely.

6. Close the kick plate cover.

22 EN
 6 Suggested solutions for problems
Drying process takes too much time
• Meshes of the filter may be clogged. Wash with water.
Laundry comes out wet at the end of drying.
• Meshes of the filter may be clogged. Wash with water.
• Excessive laundry might have been loaded in. Do not load the dryer in excess.
Dryer does not switch on or the programme does not start. Dryer is not activated
when set.
• It might have not been plugged in. Make sure that the machine is plugged in.
• The loading door may be ajar. Make sure that the loading door is properly closed.
• Programme might have not been set or the "Start/Pause/Cancel" button might
have not been pressed. Make sure that the programme has been set and it is not
in “Pause” mode.
• "Childproof lock" might have been activated. Deactivate the childproof lock.
Programme has been interrupted without any cause.
• The loading door may be ajar. Make sure that the loading door is properly closed.
• Electricity may be cut off. Press "Start/Pause/Cancel" button to start the
programme.
Laundry has shrunk, become felted or deteriorated.
• A programme suitable for the laundry type might have not been used. Dry only
the laundry which is suitable for drying in dryer after checking the labels on your
clothes.
• Select a programme with suitable low temperature for the laundry type to dry your
clothes.
Drum lightning does not come on.
• Dryer might have not been started by using the "On/Off" button. Make sure that
the dryer is on.
• Bulb may have blown. Call the authorized service to replace the bulb.
“Final / Anti-creasing” symbol flashes.
• The 2-hour anti creasing programme to prevent laundry from creasing might have
been activated. Turn off the dryer and take out the laundry.
“Final / Anti-creasing” symbol is on.
• Programme has come to an end. Turn off the dryer and take out the laundry.
Water comes out the cover.
• Clean the entire inner surface of the cover and door gasket.
Cover opens spontaneously.
• Push it until you hear that it is closed.
For products with a condenser:
“Water tank” warning symbol is on.
• Water may be full.
• Anti-creasing programme might be running. Drain the water in the tank.
“Filter cleaning” symbol is on.
• Filter might have not been cleaned. Clean the cover filter.

23 EN
“Condenser cleaning” symbol is on.
• Filter drawer/Condenser might have not been cleaned. Clean the filters in the
condenser/filter drawer under the kick plate.
A Call an authorised service if the problem persists.

24 EN