Scribd
Upload
56 views1 page

Specification of Tool Makers Microscope

This technical specification describes a tool makers microscope with 30x magnification, an X-Y table measuring 150 x 150 mm, travel of 50 mm x 50 mm, a micrometer with 0.25 mm least count and 0.01 mm accuracy, diascopic and epidiascopic light sources with a 360 degree graduated ring and 6 minute vernier, a green filter, 6 mm view field, and erect image with electronic light intensity control.

Uploaded by

navneet patil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views1 page

Specification of Tool Makers Microscope

This technical specification describes a tool makers microscope with 30x magnification, an X-Y table measuring 150 x 150 mm, travel of 50 mm x 50 mm, a micrometer with 0.25 mm least count and 0.01 mm accuracy, diascopic and epidiascopic light sources with a 360 degree graduated ring and 6 minute vernier, a green filter, 6 mm view field, and erect image with electronic light intensity control.

Uploaded by

navneet patil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Specification of Tool Makers Microscope :

Magnification : 30X
X-Y Table : 150 X 150 mm
Travel : 50 mm X 50 mm
Micrometer : 0.25 mm L.C. 0.01 mm
Light Source : Diascopic & Epidiascpic
360 ‘ Graduated ring with 6
minutes vernier
Filter : Green
View Field : 6 mm
Image : Erect
Electronic regulator to control light intensity.

You might also like